Maximum no of users supported by OCS 10.1.2 in a single box installation ?

Hi OCS experts,
What is the maximum number of users supported by OCS 10.1.2 in a single box installation for a 6 way Intel box or a 12way AIX box.???
I mean if the server hardware (processor, memory, and storage are huge enough)...
Are there any limits by the software side of OCS ???
I am planning to deploy OCS for about 15,000 users on Redhat Linux AS 4. We also have the option to deploy it on AIX if required.
Many thanks,
maas.

Many thanks. But as OCS 10.1.2 documentation indicates upto 1,000 users for single server installation. So I wanted to know if there is any practical limit by the OCS software itself on the number of users in single server deployment on Linux.
Like for instance IBM indicates that domino 7 can now go upto 12,000 users in a single box.
Is there any similar recommendation from Oracle to ease in capacity planning decisions for Architects and Implementers.???
I understand that it would be a very difficult prediction keeping in mind the huge functionality of OCS. So let me narrow the scope of our deployment, In the beginning we would using OCS mostly for Email (15,000 users) and about 2000 of these users would also be using calendering. 4,000 Email users use POP clients to check emails frequently. Remaining users use Webmail to check emails upto 2 or 3 times a day.
Now, if you experts advice that a six way IBM eServer X445 server with 16GB RAM and sufficient SAN storage would be able to take this load then I can go ahead with it. Do I have to take any specific measure in design and deployement to leave room for adding nodes.
Many thanks,
maas

Similar Messages

What maximum number of users supported local p2p?

What maximum number of users supported local p2p?

the maximum number of DIRECT_CONNECTIONS NetStreams in one NetConnection is controlled by NetConnection.maxPeerConnections. the default is 8, but you can change it to anything.

OCS Single-box installation for windows??

hi.
do i have to install Oracle9i Database, before i install OCS single-box for windows?
any one have any idea?

No, You don't need oracle 9i DB installed in Single Box, Once you start Single Box installation, you will be prompted to create a DB for Files/Email and other 9i DB will be created for IAS.

Maximum Con-current users supported by Forms6i

Does forms-6i will be able support 100 con-current user connection,client/server connections. Could please advise some document to have some statistics on the same.

Not very clear what your question means exactly. In Client/Server configuration, Clients are independent from each other. If you meet the following conditions
- Forms are correctly designed
- Database is correctly designed
- DB machine is adequate
- Network is adequate
you could have hundreds (maybe thousands) of Clients. (Then it's up to you to manage such a configuration.....)

OCS windows single box installation fails

Hi there,
I´m having trouble with installing the OCSR2 single box distribution.
My environment is a Xeon with 1GB Ram running Windows Server 2003.
The machine is a blank installation without any third party tools, just the available MS patches are installed.
The information storage installer runs without any complaints but the second step which installs the IAS infrastructure fails with a couple of configuration assistants.
First one that fails is the Instance schema assistant. All other assistants are related to OID. Like Password randomize and creating guest account etc.
I have used all defaults for every setup option, though there are not many ;-)
The server is registered with our DNS server and has a fully qualified domain name, which I have proofed from other computers in our LAN.
Are there any suggestions for this issue. I´m really stuck with installation and have no idea what to do.
Any help is very much appreciated.
Cheers Elmar

I have the same problem, on Windows 2000 Server with SP4. I noticed that the InternetDirectory service is marked as "starting". I looked at which ports were open (netstat -an) and 389 is not opened.\
I also have an another problem: the Database Configuration Assistant has failed too. It complains that I have a invalid database domain name:
Invalide database domain name. The database domain name must start with an alphabetical character.
But my database domain name (and SID) only contains letters.

Maximum number of user mailboxes supported by single Exchange Database in 2007 / 2010 & 2013 ?

What is the Maximum number of user mailboxes supported by single Exchange Database in 2007 / 2010 & 2013 ?
Aditya Mediratta

Agree with Keith, there is no MB # limit, however there are practical concerns such as DB size and how that effects recoverability as well as performance. In terms of extremes we had one major educational customer that had 35K Mailboxes in
a single database so you can utilize a ridiculous # of mailboxes in a DB if desired. IMO you are better off to keep the # of mailboxes to a reasonable level, i.e. no more than 250-500 mailboxes per DB
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Maximum number of AP supported has already joined cisco

Dear all,
We have vWLC, AP connected through MPLS network, we also have ap base license for 15 AP, the problem is that AP cant joint to WLC because of
this error:
Maximum number of AP supported has already joined cisco
WLC shows that all 15 licenses are used, but we have only 3 AP
What is that? bug or not?, everything worked fine before we put new 4 AP into the network
thank you
I attached outputs in photos:

This license is evaluate and it works fine, but when it is our license it shows no AP in summary
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.100.60
RTOS Version..................................... 7.4.100.60
Bootloader Version............................... 7.4.100.60
Emergency Image Version.......................... 7.4.100.60
Build Type....................................... DATA + WPS
System Name...................................... Cisco VWLC
System Location.................................. ESXI
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1631
IP Address....................................... 192.168.6.1
System Up Time................................... 0 days 17 hrs 29 mins 9 secs
System Timezone Location......................... (GMT +4:00) Muscat, Abu Dhabi
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... Multiple Countries:BY,MX,US
--More-- or (q)uit
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 7
Number of Active Clients......................... 41
Memory Current Usage............................. Unknown
Memory Average Usage............................. Unknown
CPU Current Usage................................ Unknown
CPU Average Usage................................ Unknown
Burned-in MAC Address............................ 00:50:56:9F:68:43
Maximum number of APs supported.................. 200
(Cisco Controller) >show ap summary
Number of APs.................................... 3
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name             Slots AP Model              Ethernet MAC       Location          Port Country Priority
Meeting_Room         2     AIR-LAP1142N-E-K9      54:75:d0:f5:3a:e4 default location 1        BY       1
Fttb                 2     AIR-CAP3602I-A-K9     30:f7:0d:29:03:42 default location 1        MX       1
Technical            2     AIR-LAP1142N-E-K9      c8:9c:1d:f4:72:8a default location 1        BY       1

I have bought used I phone 4s. I cloud fails to accept my apple ID, which is accepted by I tunes. In fact it says that I have used maximum number of user accounts. Kindly help me in this matter.

I have bought used I phone 4s. I cloud fails to accept my apple ID, which is accepted by apple store and I tuned.
It says that I have already used maximum number of user accounts. Kindly help to resolve this problem.

Hello Renvin29,
It sounds like you need to disable your iPhone remotely. I'm sorry to hear about your phone! The only way to do this with is Apple services is if you had Find my iPhone enabled. You have 2 options:
You can use this article to put the phone into Lost Mode and preserve your data on it, but prevent access to it:
iCloud: Use Lost Mode
http://support.apple.com/kb/PH2700
Or you can just erase it remotely outright:
iCloud: Erase your device
http://support.apple.com/kb/PH2701
You should also take a look at this article for additional info on what to do about this situation:
If your iPhone, iPad, or iPod touch is lost or stolen
http://support.apple.com/kb/HT5668
Thank you for using Apple Support Communities.
Take care,
Sterling

How to find maximum number of users we can assign for Hyperion Planning.

HI,
How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1.
In Essbase propreties, the system is showing maximum planning users could be 65535.
what would be the number for concurrent scenario?
Thanks
Giri
Edited by: Giriprasad on Jun 18, 2012 2:18 AM

The number of users would be based on your license agreement with Oracle, the system is not aware of your license agreement so it is up to you to stick to it.
Cheers
John
http://john-goodwin.blogspot.com/

T400 maximum hard drive size supported by BIOS.

Does anyone know what the maximum hard drive size supported by the BIOS for a T400?
Solved!
Go to Solution.

it doesn't exist yet. You can use any sata hdd with 2.5 inch form factor and 9.5 mm thickness.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Maximum number os users in a group

What is the maximum number of users that can be in a group on OS X server 10.4? IN 10.3 I think it was 10,000
I ask, because I am integrating with an AD server, where the group we are trying to manage preferences on is 28,000>

As far as i know there is no problem for the os.

Maximum number of User defined dimensions in Planning v11.1.2

Hi guys,
I am new to Hyperion Planning version 11.1.2, just wanted to clarify what is the maximum number of User defined dimensions that can be added in a planning application.
I've also learnt that the number of Alias tables is more than the previous versions. What is the maximum number of Alias tables in Planning version 11.1.2 ?
Regards.

Maximum number of alias tables is 10 including the default alias table
As for custom dimensions then I wouldn't expect you to hit a maximum unless you want to design a planning application destined to fail.
Cheers
John
http://john-goodwin.blogspot.com/

How to find the maximum no of users logged in Database

Hi All,
How to find the maximum number of users logged in database at particular time? I can find currently logged users or umber of sessions running on Database but I wanted to find at what time maximum number of users or sessions connected to the DB? is that possible? if yes please help me. thanks.

Vijay wrote:
Hi All,
How to find the maximum number of users logged in database at particular time? I can find currently logged users or umber of sessions running on Database but I wanted to find at what time maximum number of users or sessions connected to the DB? is that possible? if yes please help me. thanks.
select * from v$resource_limit;Lists about 20 different resources with current, maximum and limit on usage. Session count is one of them. I don't think there's any (simple, efficient) way to determine the maximum number of different users of sessions, though.
Regards
Jonathan Lewis

Maximum lifetime for user ticket renewal - where to find this setting on member server?

Hi,
we have set a value of 15 days for the GPO setting "Maximum lifetime for user ticket renewal" under kerberos policy on a separate policy linked to domain. The default value on "default domain policy" is 7. RSOP or GPRESULT
doesnt show the actual setting on a member server. As both policies are linked at domain level, will the effective policy be 7 or 10 on member servers/Workstation? How do we find the actual settings for above policy on any of the member servers?

> or 10 on member servers/Workstation? How do we find the actual settings
> for above policy on any of the member servers?
Nowhere. You'll see this only on a DC, because this only affects DCs
(the KDC, to be precise, that issues these tickets).
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Multi-User Support

I have all of my photos saved on a file server in my house. I am using Photoshop Elements 11 on my desktop to catalog all of my photos. I am doing things like tagging photos and the people recogonition features.
If I install Photoshop Elements on my wife's laptop and she accesses the same photos on the file share, will she see the tags?

I don't think there is software that both has face recgnition and multi-user support. Normally, multi-user support is available in upper-end packages, while face recognition is usually available in consumer packages.
If you want true multi-user support, one such product is called Daminion.
I wonder if Adobe will catch on to this feature reqeust.
I'm sure they know there are people who want multi-user libraries. In my opinion, they choose not to add this feature because the cost to develop this feature would blow up the cost of Photoshop Elements to the point where people wouldn't buy it. Which is probably the same reason multi-user libraries are not available in Lightroom either.

Maximum no of users supported by OCS 10.1.2 in a single box installation ?

Similar Messages

Maybe you are looking for