Maximum Nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?

Hi.
I am looking for information How many nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?
If you can provide for all the versions that would be great.
-Thanks
- Ajay Chanana

Hi,
You can configure a Windows server 2008 NLB cluster with up to 32 nodes. However,
scaling beyond 8 nodes will cause a slight performance hit because the network traffic is broadcasted to every node and only one NLB node accepts the connection.
For more detailed information, please refer to the link below:
FAQ Week for NLB: Tuesday
Best regards,
Susie

Similar Messages

  • USB Controller Driver (3.0) for Windows Server 2008 Standard Edition 32-bit

    Hi,
    I have recently built a HP DL320e Gen8 v2 server with Windows Server 2008 Standard Edition 32-bit & it's missing the USB Controller Driver which HP don't have. I have searched endlessly online without success. HP suggest I try Windows but I couldn't
    find it in the Download Center either.
    Can somebody please provide me with the USB Controller Driver for Windows Server 2008 Standard Edition 32-bit?
    Regards
    Naz 

    Hi,
    Thanks for your posting.
    For this issue, i think you need to search in the HP official website or contact the HP support.
    Regards.
    Vivian Wang

  • Active-Passive Failover cluster in Windows Server 2008 R2

    Hi,
    As per the client requirements, I build an active-passive Oracle 11g R2 database cluster in Windows Server 2008 R2.
    (Used Microsoft cluster as Client don't have Fail Safe licence)
    As per the configuration, I follow the below mentioned steps:
    a)OS vendor configured Active-Passive Windows Cluster
    b)Installed Oracle 11g R2 on both the nodes with same ORACLE_HOME name
    c)Create Listener and configured it with cluster IP in Node1
    d)Create Database from Node1. Physical files location are all in Storage
    e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2
    f)Configure Listener with the same Oracle SID.
    g)Test database failover from Node2 with Listener registration
    h)Open the Windows Failover Manager to configure the Oracle Database and Listener Service in the Cluster Group
    Now I am facing problem by moving Cluster Group movement. Whenever trying to moving the group, Listerner service is not getting up by Cluster Manager as quorum is not included in the group and that quorum disk is not moving in the failover node with the Oracle Cluster Group. As per my understanding Quorum having information of Cluster IP which has been configured with Listener.
    But when I am shutdown one node, then in the other node all the resources successfully moving and cluster able to online all the resources. I guess at that time Quorum is also moving and thus cluster can able to make Listener online.
    Please suggest how to resolve this issue. Means how can I make Listener up instead having any dependencies with Quorum in the fail over node?
    Thanks a lot for your help.

    hello
    I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
    Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
    And, can you pls elaborate on this point
    e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
    Pls send me the details at [email protected] or you can contact me at 08054641476.
    Thanks in advance.

  • HFM and FDM on Windows server 2008 - 64  bit

    Hi All,
    We are installing HFM and FDM on Windows server 2008 - 64 bit.
    For FDM we installed 32 bit oracle client and for HFM 64 bit client.
    When trying to Configure HFM the database Configuration is failing.
    Appreciate all your support.

    I was not able to get both HFM and FDM to work on the same node due to differences in the 32/64 bit Oracle Client requirements. I suggest moving FDM to another node where you can install the 32 bit client without effecting HFM.
    Nick

  • Lms 3.2 and window server 2008 standard: License Server/Daemon Manager is down

    LMS 3.2 and window server  2008 standard, get error when we try
    Khi truy nhập vào menu chức năng:
    License Server/Daemon Manager is down. Please check license.log for more information.
    access licensing:
    Error communicating with License Server. License Server may be down. Please start the License Server, then refresh the page.
    Lincense.txt is file log of LMS
    Must I have to active window server 2008 first ?
    thank you very much ?

    Hi ,
    --Add the Casuser to the Administrator Group
    and then reset the casuser password:
    1. Go to CSCOpx\setup\support> and run the following command:
    resetCasuser.exe
    2.     Restart the daemon manager:
    Net stop crmdmgtd
    Net start crmdmgtd
    Let me know how it works
    If above did not help then send me the syslog.log and screen shot of the EventViewer with the latest Application Error that you see there.
    --also screen shot of the below directory :
    NMSROOT\etc\license
    Thanks
    Afroj

  • Need solution for solving TIME_WAIT in TCP/IP ports in Windows Server 2008 Standard Service Pack 2

    In one of our windows machine( OS : Windows Server 2008 Standard (Service Pack 2)-32bit), we are facing TIME_WAIT in all the TCP/IP ports and it is not getting closed.
    On analyzing the issue, we found solution for this from the below link,
    https://support.microsoft.com/en-us/kb/2553549
    In this page, we are able to get the hotfix for Windows Server2008 R2 SP1 but i can't able to get for  Windows Server 2008 Standard SP2(32bit). If we try to apply the hotfix vailable for SP1, it is showing "The update does not apply to your System".
    Kindly provide us the solution for solving TIME_WAIT issue in the machine. 
    OS Details : Microsoft Windows Server 2008 Standard
    Version : 6.0.6002 SP2 Build 6002
    System Type : 32 bit(x86-based PC)
    Awaiting for the response.
    Thank you,
    Pushpalatha.A

    Download correct version from Microsoft Update Catalog. Run it with elevated rights.
    M.

  • Windows Server 2008 Standard 64 bit edt support Hyper-v replication

    Dear Team.
    Windows Server 2008 Standard 64 bit edt support Hyper-v replication or not.
    If my primary physical server down so my secondary server act as primary server.

    Hi,
    Windows Server 2008 Hyper-V do not Support Hyper-V replica.
    This is a new Feature in Hyper-V for Windows Server 2012.
    http://technet.microsoft.com/en-us/library/hh831410.aspx#BKMK_Replica
    Regards
    Sebastian

  • Is there a limit for SGA_MAX_SIZE on windows Server 2003 Standard Edition

    I have a 9.2.0.8 Standard Edition running on windows Server 2003 Standard Edition. I cannot set SGA_MAX_SIZE to more than 1.7G. I have total of 3G RAM on that machine.

    In order to use memory over 4 GB the /PAE flag must be set and Oracle must be tuned
    accordingly. As mentioned above, for using memory over 4 GB and less than 16 GB, the
    /3GB flag can be set as well. Oracle uses memory above 4 GB by taking advantage of
    the AWE (Address Windowing Extension) feature built into Windows 2000, Windows
    2003 and Windows XP.
    In order to use this memory, the Oracle administrator account (either LocalSystem or the
    domain user that installed Oracle) must have the “Lock memory pages” privilege set. In
    addition the AWE_WINDOW_MEMORY parameter must also be created and set. This
    parameter specifies how much of the 3 GB virtual memory space allocated to Oracle
    should be used for mapping database buffers. The default value of 1GB should be
    sufficient and increasing this value could be detrimental, since you only have 3 GB of
    virtual memory to use. The higher the value of AWE_WINDOW_MEMORY that you
    have set, the more likely it is that you will experience user memory issues. Start with the
    default value of 1 GB and tune upwards only if you need to.
    Once these steps have been completed, larger memory can be set by configuring
    DB_BLOCK_SIZE and DB_BLOCK_BUFFERS initialization parameters. When using
    Very Large Memory (VLM) you should use DB_BLOCK_BUFFERS rather than
    DB_CACHE_SIZE in order to configure memory.

  • Windows Server 2008 Standard Drivers for Intel I217LM Gigabit Network adapter

    Hi everybody,
    I am unable to find Network drivers for Intel® I217LM Gigabit Network adapter for Windows Server 2008 Standard (32-bit). I have found the drivers for Windows Server 2008 R2 but that being 64-bit do not work.Kindly help me in sorting out this problem as I
    am stuck need to install the drivers.
    Thanks in advance.
    SHOAIB

    Please post your question in Intel forums : https://communities.intel.com/community/tech/places
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Cucm 9.1.2 and Active Directory(Windows Server 2003 Standart Edition SP2)

      Hello!
     Can CUCM 9.1.2 support an integration with Active Directory(Windows Server 2003 Standart Edition SP2)? How do I have to write down LDAP Manager Distinguished Name? I can find supporting only Active Directory 2003 in documentations without reference to Operation System.

    Yes, it is possible.
    Check this how-to if you have any doubts about the process.
    http://blog.ipexpert.com/2010/04/28/cucm-and-active-directory-integration/
    http://www.markholloway.com/blog/?p=1189

  • Migrate SBS 2003 with AD and Exchange to Windows Server 2012 Standard

    We are using SBS 2003 and we have configured Exchange server and AD with DNS and DHCP. Now we are planning to move SBS 2003 to Separate servers like windows server 2012 standard AD with DNS and DHCP and Windows server 2012 Standard with Exchange
    2010.
    Is it Possible?? we need step by step guide.
    Thanks in advance.

    Hi,
    You probably would not find any step by step guide for this kind of migrations. If you are not comfortable with doing such migrations I would recommend to if you need to do it your self do some test migrations. Or otherwise get help by a local IT company
    that is familiar with migrations.
    But to give you some information, first thing before starting a migration is check the health of your SBS 2003 server / domain. Use tools like dcdiag, netdiag and best practice analyzer. I wrote a blog post about steps to think about before you start this
    might help: http://blog.ronnypot.nl/?p=914
    When every thing is clean you can start adding the new windows server 2012 machines as member servers to your domain. 
    Next you can promote one of the servers to additional domain controller on your domain (Keep in mind SBS needs to hold all FSMO roles so moving these is the last step your should do.) Also promoting a windows server 2012 to domain controller has slightly
    changed, you need to install the ADDS role and follow the wizard to promote the server to a DC.
    With installation of the new DC install DNS allongsite it will automatic replicate settings during confiugration.
    DHCP must be installed manual, depending on your scope and settings it might be as easy to create a new scope and disable the old dhcp server.
    On the server Exchange needs to be installed, make sure you install and do all pre-requirements. Than install Exchange it will automaticly detect you already have an Exchange organization and is installed as additional server. You can configure all settings
    and when everything is configured right you start moving mailboxes.
    When everything is moved away from the SBS 2003 server, uninstall exchange, move the FSMO roles to the new DC and after that demote the sbs 2003 server so it is not listed anymore as an additional DC in the domain. Last would be shutdown the server and remove
    all records left in AD and DNS.
    There is this guide for migrating SBS 2003 to windows server 2008 R2 and Exchange 2010, this might give you some usefull information, not everything will be the same but it is a good start:
    http://demazter.wordpress.com/2010/04/29/migrate-small-business-server-2003-to-exchange-2010-and-windows-2008-r2/ 
    Regards Ronny
    Visit my Blog or follow me on
    Twitter

  • "Failed to connect to the service manager" when I try to add nodes to a cluster on Windows Server 2008 R2

    Hello,
    I get the following error message everytime I try to add a node to an existing cluster "Failed to connect to the service manager".
    I'm running Windows Server 2008 R2,
    Any ideas?

    Hi saeedawadx,
    Please run the cluster validation and post the error or warning information, in normal scenario the “Failed to connect to the service manager” issue often caused by the firewall
    or AV soft block the others node connect, please try to disable the firewall and AV soft then try again.
    The following related article will give more helpful tips,
    The case of the server who couldn’t join a cluster – operation returned because the timeout period expired
    http://blogs.technet.com/b/roplatforms/archive/2010/04/28/the-case-of-the-server-who-couldn-t-join-a-cluster-operation-returned-because-the-timeout-period-expired.aspx
    Trouble Connecting to Cluster Nodes? Check WMI!
    http://blogs.msdn.com/b/clustering/archive/2010/11/23/10095621.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Oracle 10g R2 whitout RAC in a cluster hw (Windows Server 2008 cluster)

    Hi,
    Is this possible?
    I ask it 'cause my customer wants to improve this solution.
    I know that Oracle 10gR2 vs Windows Server 2008 is not supported and Oracle Standalone vs Hardware Cluster, neither too, but it's possible or will be a source of big problems?
    Thanks in advance.
    JRC.

    Hi lain;
    Please check Re: oracle10g on linux cluster
    In my issue we were working on linux cluster. Our aim is
    we have 3 server and they are linux cluster OS level. Let us call those server A,B and C... We want to make oracle10g works on server A and when server A is gone oracle10g on B server take place of A, if server B gone too, oracle10g on C server take place of B.... In each server we had different numver of database. I mean on machine a we have 3 database, on server B we have 4 database and on server C we have 7
    What i do for this:
    1. I install 10g database software only (not created database)
    2. using netca and create listener for each database
    3. using dbca and create database for each server.While on dbca wizard i gave SAN path for dbf
    4. Linux admin arrange all other stuff(I mean when db1 on server A crash server B take responsibility of Server A and db1 keep working)
    I hope it helps you
    Regard
    Helios

  • No valid driver for officejet 6700 premium on Windows Server 2008 - 32bit

    Even though there is a download file available on the support site it is not compatible with WS2K8
    Does anyone know of a work-around for this ?
    I can not change the OS, as was suggested by HP tech support.

    Hey typesetter773,
    The driver for Windows Server 2008 W32 is available on the website as you mentioned.  I will provide a link for those looking for this driver.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109483-2&cc=us&dlc=en&lc=en...
    If you are getting a message about compatibility, then it is possible you are running Windows Server 2008 R2?  These are different versions of the WS2K8 OS and the driver will not work with R2.
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Toad for Oracle 10.1 on Windows Server 2008 SP2 64-bit

    Hello guys,
    I want to ask your opinion regarding an issue?
    I want to install the Toad for Oracle application on my machine
    (Windows Server 2008 Enterprise SP2 64-bit)
    I have already installed Oracle DB 11g R2 64-bit for Windows.
    I have tried to install Toad for Oracle version 10.1.1.8 making no use of any Oracle Client,
    but it displays an error "Oracle Client not found!"
    Now, I have read this article Oracle Home is not Valid on TOAD
    and it says
    >
    TOAD required 32 bit Oracle client on 64 bit windows server systems
    all you need is install Oracle 32 bit client, the toad will work.
    >
    I installed the 32 bit Oracle client, but now I'm getting
    Ora-12154 TNS: could not resolve the connect identifier specifiedAny advice?

    See the explanation here - Re: ORA-12154 could not resolve the connect indentifier specified
    Srini

Maybe you are looking for