Maximum number and size of media

Can anyone tell me:
what's the maximum number of photos that can be organized in Elements 10?
what's the maximum size of a photo with a thumbnail
what's the meaning of the 'broken card' icon?
Thanks. Robert

brandwacht wrote:
I did try to optimize the catalog, it did not work. I'm getting a bit worried about the stability of my database now that it is getting larger (32,000 files with 8 Gb/i7/300Gb free HD).
Guess the installation of version 11.0 started all these troubles.
I can't say what was the source of the problem, but I really don't think that the installation of PSE11 together with PSE10 was the culprit.
On the other hand, you have a big catalog, but PSE10 or 11 can easily handle that.
One more detail please : when you did the catalog conversion from PSE10 to PSE11, do you remember if rebuilding the thumbnail cache was quick (a few minutes) or several hours like in the conversion in previous versions ? What's new in the PSE11 conversion is that the thumbs.5.cache file (a sqlite database) is built from the PSE10 version thumbnails, without opening and creating a new thumbnail for each file. It may be that the new way, although welcomed for its speed, has missed the conversion. However, in such a case, optimizing should have rebuilt the cache .

Similar Messages

How can I determine the number and sizes of redologs?

Dear all,
How can I determine the number and sizes of redologs are sufficient to allow redo log switching while hot backup is in progress?
Please advice,
Amy

Two questions here - what the OP put as the subject title and what was asked in the thread, which are different questions.
I would interpret the question in the thread to mean "how to avoid hanging due to archiving waiting for a redo log group to become available." Alert log, wait events, and user complaints would be the source of information here.

Maximum bitrate and size for Apple TV3

Hello,
how much is maximum bitrate and file size for Apple TV3 homesharing? I transfared some bluray, but it lags. Im streaming via cabble.

No official answer on this but specs say:
Video Formats
H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
AppleTV 2/3 have less than 8GB of memory to buffer movies but there are movies over 8GB and I've certainly streamed larger than that.
What lags? Playback? Stuttery display?

How can I determine the number and size of the items in a window?

With operating systems before Mavericks, the number of items contained and the total size was displayed at the bottom of an open window. This was valuable, for example, when assembling files and folders for burning to discs. How can I quickly obtain the information using Mavericks?

Welcome to Apple Support Communities
That setting is hidden by default, but Finder still has got the feature. To enable it, open a Finder window and go to View menu (in the menu bar) -> Show Status Bar

How to select the 5 most maximumst number and the 5 most minumumst number?

Dear All,
I draw a program. That is every loop the random number.vi create a number. I want to update the data in every loop to display the first 5 maximum number and the minumum.
I don't know how to do it. Could you please give me some suggestions.
Every reply is thankful.
My LabVIEW version is 7.1
Thanks!
Hugo
Attachments:
max&min.vi ‏12 KB

Hi Hugo,
try those steps:
1) make a loop with 2 shift registers, initialized with arrays of 5 elements, set to 0.5 each
2) in the loop you append those two arrays containing 5 elements and the new random number (range 0...1)
3) sort the resulting 11 element array
4) take the first 5 for the 5 "smallest values" and the last 5 for "biggest values" and feed them into the corresponding shift register
5) next iteration!
Message Edited by GerdW on 08-13-2007 09:20 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Maximum number of accounts

Have been using macs for twenty years but this one is driving me nuts.
I have NEVER ever accessed iCloud on ANY device, though I probably tried in the past.
Anyway, the other day I wanted to give it a try and I systematically get the message "you have reached the maximum number of accounts". So I can't login to iCloud.
What I find pretty stupid is:
- I am currently using ONE account that I wanted to use on ONE device
- I can't create another account
- I can't even manage my account to unactivate, for instance, the iPhone I'm not using anymore.
So what the heck is this maximum number and how can we reset that?? This is nonsense!!
Thanks
Olivier

Thanks.
But I'm still lost.
I'm pretty sure I didn't create three accounts on any device (as I said, I never ACCESSED iCloud before) and even if I did accidentaly, I don't remember which accounts they were.
Ok, let's say I will start from scratch :
- if I try to create a new id I get the message "this computer cannot create any more free account"
So... I kind of understand there is a limit of a mix of devices and computers. But is there NO way to at least know what account is linked to what machine? I mean, let's say I DID create these accounts... how can I get a hand on them again??
Thanks

Adobe media server stand and adobe meidia server pro Maximum number of concurrent connections ?

adobe media server stand and adobe meidia server pro Maximum number of concurrent connections ?

Petro - you are alive - good news. Can you please contact Matt or I please, we'd be grateful mate - thanks - gavin

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Maximum number of the "records" in: Aggregated bill and payment handling

HI,
currently we are dealing with proposal and design of processes/settings in area Aggregated bill and payment handling among distributor and suppliers.
Do you have experience and/or knowledge with maximum amount of records in related processes , like:
Supplier side:
- the maximum number of the individual postings aggregated in agregated posting on the supplier contract account?
- the maximum number of the of the aggregated postings included in aggregated bill (print document)?
- and consequently the maximum number of the individual print documents included and printed/sent in aggregated bill (print document)? Also in case, if the aggregated bill is send as IDOC with details ?
- the maximum number of the IDOCS sent in aggregated IDOC?
- the maximum number of the records in distribution lot created form aggregated billing?
Distributor side:
- the maximum number of the individual electronic bills posted in aggregated form on the supplier contract account during processing ?
- the maximum number of the individual payments included in PAN?
Thanks
Tomas.

Hi,
I would not receive too many documents into an aggregated document (suppier and distributor side). Try to find an error in a distribution lot or payment advice note with more than 10000 items. You can use posting area R0070 and R0071 (TX FQC0) for limit the size of aggregated postings.
Best regards,
Alexander

Rows per batch and Maximum insert commit size

Have been reading various post to understand what the properties 'Maximum insert commit size' and 'Rows per batch' actually do and am confused as each have their own explanation to these properties. As far as I understood, MICS helps SQL server engine to
commit the number of rows specified to it and RPB is to define the number of rows in a batch?
In case I set the property to say RPB - 10000 and MICS - 5000, does this mean the input data is fetched in a batch of 10000 and each time only 5000 are committed?
What happens in case of RPB - 5000, MICS - 10000. Are the batches formed for each 5000 records and committed for each 10k records?
One post mentioned on RPB being merely a property to help SQL server device a optimal plan for data load. If this is true then why have the MICS property? Instead RPB can be assigned a value and engine decides on what is best load method it wants to use.
Thanks!
Rohit

Hi Rohit,
Maximum insert commit size specify the batch size that the component tries to commit during fast load operations. The value of 0 indicates that all data is committed in a single batch after all rows have been processed. A value of 0 might cause the running
package to stop responding if the component and another data flow component are updating the same source table. To prevent the package from stopping, set the Maximum insert commit size option to 2147483647.
Rows per batch specify the number of rows in a batch. The default value of this property is –1, which indicates that no value has been assigned.
For more details about those two properties, please refer to the following document:
http://msdn.microsoft.com/en-IN/library/ms188439.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Install HRCS9.0 and PT8.53 with Linux Issue: the files intiPT853.ora and initHRCS90.ora: maximum number of DB_FILES exceeded

Folks,
Hello. I have installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The entire PeopleTools runs correctly in browser at the beginning.
After I set up HCM and Campus Solution 9.0 Database Instance named HRCS90 in Linux successfully, PeopleTools 8.53 Database Instance PT853 cannot be mounted. Its error message is below:
SQL> startup
ORACLE instance started.
Total System Global Area 538677248 bytes
Fixed Size                  2146024 bytes
Variable Size             528482584 bytes
Database Buffers            4194304 bytes
Redo Buffers                3854336 bytes
ORA-00059: maximum number of DB_FILES exceeded
In the file /home/user/OracleDB_Home/dbs/initPT853.ora, its parameter db_files has 3 values: small 400, medium 1021 and large 1500. The initial value is 1021 and it works correctly at the beginning. But after set up another instance HRCS90, the above error message comes up and instance PT853 cannot mounted. I change the value of db_files from 1021 to 1500 in the file initPT853.ora and restart OS Linux. But get the same error as below:
SQL> startup
ORACLE instance started.
Total System Global Area 538677248 bytes
Fixed Size                  2146024 bytes
Variable Size             528482584 bytes
Database Buffers            4194304 bytes
Redo Buffers                3854336 bytes
ORA-00059: maximum number of DB_FILES exceeded
In the file /home/user/OracleDB_Home/dbs/initHRCS90.ora, its parameter db_files has 3 values: small 80, medium 400 and large 1500. I use db_files=400 and it works correctly. I start up instance HRCS90 right after the above error message as below:
SQL> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[user@userlinux bin]$ export ORACLE_SID=HRCS90
[user@userlinux bin]$ ./sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Sat Nov 23 12:40:02 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 538677248 bytes
Fixed Size                  2146024 bytes
Variable Size             528482584 bytes
Database Buffers            4194304 bytes
Redo Buffers                3854336 bytes
Database mounted.
Database opened.
SQL> select * from psdbowner;
DBNAME   OWNERID
HRCS90     MYNAME
SQL>
As we see above, the instance HRCS90 works corretly and PT853 cannot start up. The parameter DB_FILES of the file initPT853.ora has an issue.
My question is:
Because 1021 and 1500 are not enough to startup instance PT853, what value should be used for DB_FILES of the file initPT853.ora ?
Thanks.

user8860348 wrote:
Folks,
Hello. I have installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The entire PeopleTools runs correctly in browser at the beginning.
After I set up HCM and Campus Solution 9.0 Database Instance named HRCS90 in Linux successfully, PeopleTools 8.53 Database Instance PT853 cannot be mounted....
I'm sorry, but I don't understand what does "Instance" mean here.
>In the file /home/user/OracleDB_Home/dbs/initPT853.ora, its parameter db_files has 3 values: small 400, medium 1021 and large 1500.
Are you not using a spfile ? Does the file contain really the 3 values ? What is the last ? Have you checked the value in the database side "show parameter db_files" ?
>But after set up another instance HRCS90, the above error message comes up and instance PT853 cannot mounted
Again, I have no idea what it means.
>In the file /home/user/OracleDB_Home/dbs/initHRCS90.ora, its parameter db_files has 3 values: small 80, medium 400 and large 1500. I use db_files=400 and it works correctly.
Again, 3 values ? What is the last ? Have you checked the value in the database side "show parameter db_files" ?
>As we see above, the instance HRCS90 works corretly and PT853 cannot start up. The parameter DB_FILES of the file initPT853.ora has an issue.
Again, I don't understand what are HRCS90 and PT853 exactly. Cannot help.
>Because 1021 and 1500 are not enough to startup instance PT853, what value should be used for DB_FILES of the file initPT853.ora ?
I'm sure, you don't have an issue with this parameter, 1500 files in the database is quite huge number. I built a demo recently, the default value 1021 was ok for me. You should have done something wrong somewhere.
Nicolas.

Maximum no. of datafile with parameter DB_FILES and size of datafile

I am working on sap 4.6C with oracle 9.2.0.7.0 and my OS is AIX 5.3
my initSID.ora file consist fo DB_FILES = 1022 which means I can add maximum to 1022 datafiles for a tablespace. Now we are nearing to the figure and worried for increasing the parameter DB_FILES value but as oracle document it is mentioned that the value for parameter is OS dependent. I want suggestion regarding the how to increase the value of parameter and can it be given ulimited value.
The other query is that now we have a limit of 2GB size for a datafile so every time when a datafile is added to a tablespace it size is 2GB can I increase the size of the datafile to 4GB/6GB/8GB with AIX 5.3 as os system if possible how can it be achieved.
Thanks
Regards
Jairaj

Hello,
I think you are a little confused.
DB_FILES is a "soft" value, and indicate the maximun number of datafiles on the database not tablespace. You can check the oracle documentation:
[quote=Oracle Reference]
DB_FILES specifies the maximum number of database files that can be opened for this database. The maximum valid value is the maximum number of files, subject to operating system constraint, that will ever be specified for the database, including files to be added by ADD DATAFILE statements.
[quote=Oracle Reference]
There is a hard limit ( regardless of the value of DB_FILES ) You can see the note 606395 for details:
<quote>
1. Physical database limits
o Database files
 maximum per tablespace : on most operating systems 1022 
 maximum per database : 65533 total, further limited by the
 db_files init<SID>.ora parameter 
 Database file size: see note 129439 for OS-specifics
<quote>
This means that there is NO posibility of having MORE than 1022 files per tablespace, no matter what.
Also it is not possible to have more than 65533 files in total.
For your second query the answer is on the note 129439 "Maximum file sizes with Oracle" ( also mentioned on the previous note )
PS: Looks like stefan was faster than me
Note 1: MAXDATAFILES is not a hardlimit in 9i either
Note 2: The limites mentioned in the note 606395 are also valid for 10g
Message was edited by:
 Fidel Vales

How to find accurate number of Rows, and size of all the tables of a Schema

HI,
How to find the accurate number of Rows, and size of all the tables of a Schema ????
Thanks.

SELECT t.table_name AS "Table Name",
t.num_rows AS "Rows",
t.avg_row_len AS "Avg Row Len",
Trunc((t.blocks * p.value)/1024) AS "Size KB",
t.last_analyzed AS "Last Analyzed"
FROM dba_tables t,
v$parameter p
WHERE t.owner = Decode(Upper('&1'), 'ALL', t.owner, Upper('&1'))
AND p.name = 'db_block_size'
ORDER by 4 desc nulls last;
## Gather schema stats
begin
dbms_stats.gather_schema_stats(ownname=>'SYSLOG');
end;
## Gather a particular table stats of a schema
begin
DBMS_STATS.gather_table_stats(ownname=>'syslog',tabname=>'logs');
end;
http://www.oradev.com/create_statistics.jsp
Hope this will work.
Regards
Asif Kabir
-- Mark the answer as correct/helpful

I am trying to setup iCloud account and when I login I see a popup. The Maximum number of free accounts have been activated on this iPhone. Pls, help me fix it. What other accounts? Thanks

I am trying to setup iCloud account and when I login I see a popup. The Maximum number of free accounts have been activated on this iPhone. Pls, help me fix it. What other accounts? Thanks

Then you'll have to use another iOS device or Mac running OS X Lion or higher to create a new account for you to use on your phone. If you don't have one, perhaps a friend would allow you to create and account on their device (note: this will use one of their three maximum accounts). To do this, they would need to go to Settings>iCloud, tap Delete Account (which will delete the account from their device but not from iCloud), then allow you to sign back in with your ID to create the new account. Then tap Delete Account to delete the new account from their device, and finally, sign back in with their iCloud ID to restore their iCloud account to their device. Then you can sign in with your ID on your phone in Settings>iCloud and use the new account.

HT204053 I have an iPhone 4S and when I try to add an iCloud account is gives me an error "Cannot Sign In, The maximum number of free accounts have been activated on this iPhone." Is there any way to deactivate an account?

I have an iPhone 4S and when I try to add an iCloud account is gives me an error "Cannot Sign In, The maximum number of free accounts have been activated on this iPhone." Is there any way to deactivate an account? I have one for myself, one for my family and one for my work. I had all three on my iphone and then I deleted my work. I wanted to get my own person @me.com account. It wouldn't let me create it from my iphone, so I created it from my Macbook Pro. I am trying to add it to my iphone, but it keeps giving me that error. If there is a way I can deactivate my work one so I can use my @me.com personal account?

Welcome to the Apple Community.
Unfortunately once all the 3 iCloud accounts have been created on your mobile device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another device or computer.
You should however be able to add existing accounts to your device, are you sure you aren't trying to create on rather than simply use an existing one.

Maximum number and size of media

Similar Messages

Maybe you are looking for