Maximum Number of Blog Entries on the Main Blog Page

I would like to increase the number of Blog entries on my Main Blog page beyond the limit of 50 allowed through the Inspector Panel in iWeb 09. Does anyone know a work-around to this limitation?
Thanks, -JAS

Try creating a new blog page that looks identical to the current blog you have. Then once you start a new blog on the new blog template you just created, simply make a button or text link to your other blog. If I'm not mistaken you can create as many blog templates as you wish.
Please let me know if I'm wrong.

Similar Messages

What is the maximum number of ARP entries (IPv4) and ND entries (IPv6) supported in our controllers?

Q: What is the maximum number of ARP entries (IPv4) and ND entries (IPv6) supported in Aruba controllers?
A: The maximum number of static ARP entries supported is about 2048 for M3/72xx/70xx platforms.
The maximum number of static ARP entries supported is about 128 for 6xx platforms.
The maximum number of static ND entries supported is about 2048 for M3/72xx/70xx platforms.
The maximum number of static ND entries supported is about 128 for 6xx platforms.

a)It depends upon software level. b) 16,000 per card, With release 9.3:
60K Connections Support on BXM-E—Provides the ability to support a maximum of 60K per card for VSI applications for the BPX 8600, for example, PNNI or MPLS, used on enhanced BXM-E cards.

When I try to connect to iCloud, say, the maximum number of free activations on the iphone

when I try to connect to iCloud, say, the maximum number of free activations on the iphone.what should I do?

Welcome to the Apple Support Communities
You have to restore the device if you want to use more iCloud accounts. Make a backup and go to Settings > General > Reset > Erase All Content and Settings. Note that you will have to set up the iPhone again and you will lose everything

[svn:fx-trunk] 11541: Fix the textLayout build number that is set in the main build. xml to match what will be set when the build machine does NOT do the build

Revision: 11541
Author:   [email protected]
Date:     2009-11-06 14:29:41 -0800 (Fri, 06 Nov 2009)
Log Message:
Fix the textLayout build number that is set in the main build.xml to match what will be set when the build machine does NOT do the build
QE notes: no
Doc notes: no
Bugs: no
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/air-config.xml
    flex/sdk/trunk/frameworks/flex-config.xml

Thats good news.

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
Message Edited by bleakreserve on 02-3-2005 06:34 AM

How to stop to display the main report page header in the subreport!

Hello all,
I have an existed report that display the CR page header on every page of the report. Now I added another subreport into report footer without using link. How do I stop to display the main report page header and display the subreport in the new page with subreport header only? I really appreciate your time to help me out on this issue. Thanks.

Hi,
I tried to supress the page header with (onlastrecord and TotalpageCount > 1) condition, but the last page of main report without page header. I still like the page header display on last record, but not on the subreport only. How do I get it? Thanks in advance.

Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

I maintain a website on which the main (index) page is frequently updated.

I maintain a website on which the main (index) page is frequently updated. In order to make sure that the latest version is displayed, I use the following in the Head of the page:
<META HTTP-EQUIV="Pragma" CONTENT="no-cache" />
This works on all web browsers, but no longer works with Firefox 5.0. Is there an alternative to this Meta statement that can be used to make sure that visitors to the site always view the newest version of the page?

See my post here <http://forums.adobe.com/message/5410674#5410674>

I'm using a 16GB iPhone 4s, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out a

I'm using a 16GB iPhone 4S, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out and come back in, all the native apps I turned cellular off for are back on again. Kindly help me

Exact same question as ankit1986, specifically with the photos while on cellular-only, and as simple as it sounds, I tried the hard reboot Ingo2711 suggested. Still experiencing the same error with the native apps reverting to on. It's killing our shared data-plan (2GB).

I purchased premiere elements 13. I followed the instructions. Loged into my account. Located my order number, but can not find the order detail page to download my product

I purchased premiere elements 13. I followed the instructions. Logged in to my account. Located mu order number but could not find the order detail page to click the download your product button. I was also asked to download the Akamai download manager which i don't understand why. Also It said that once the manager was installed the download would appear in the browser which it never did. So, I have no idea if it did download or not. Not sure what else I can try. Would love some help.

The Akamai download manager is used to download the software you purchased. Try the download resources below. The second one does not use the download manager.
PE 10, 11, 12,13 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Have changed the "Index" of my website in Dreamweaver and followed the "Put" instructions to upload it back to the "Remote Server," but when I go onto the web to check it, the main (Index) page has not changed. Help!

Have changed the "Index" of my website in Dreamweaver and followed the "Put" instructions to upload it back to the "Remote Server," but when I go onto the web to check it, the main (Index) page has not changed. Help!

This is a duplicate post; see How do I upload from Dreamweaver CS6?

How do I exit from my email account back to the main menu page ?

How do I exit from my email account back to the main menu page?

In my previous post die should have been FIVE.
Some day we might be able to edit posts on our iPad.

IPhone6 is not sending or receiving texts from non-Apple users, except when in Group texts. I've tried the various fixes on the main support page to no avail. Any ideas?

iPhone6 is not sending or receiving texts from non-Apple users, except when in Group texts. I've tried the various fixes on the main support page to no avail. Any ideas?

Have you contacted your carrier to make sure there's no issues with your account?
~Lyssa

Change the number of history entries on the Back Button

Firefox allows 15 history entries when holding the Back (or Previous) button. If I want to go to the #31 entry in the history, I have to press and hold Back many times to reach it.
I want to change that number for more entries like 50. Is it possible?

You cannot change how many are displayed in the back/forward drop down at a time.
You can change the number but not how many are displayed at a time in the dialog window.
Select the earliest entry you can on the back button (the lowest entry), and then invoke the Back button again, and go to the earliest entry.
I have test data you can try:
I have '''browser.sessionhistory.max_entries''' set to 70 the default is 50
To test bring up
* http://dmcritchie.mvps.org/firefox/tab_capacity/001.htm
What you see on the page are a lot of numbered links '''001 - 060'''
# start with the 001 entry in a new tab make sure you started it in a new tab
# then go successively through 002-060 in the same tab then go up into bogus numbers '''to 70'''
# Right click on the Back button, you will see that you can see 15 entries at a time
# Click on the earliest visible at the bottom of the heap
# Click again on the Back button to select the earliest again
# Repeat previous step until to see 001, all entries were accessible through the Back button, but 15 is the maximum that you will see at a time..

How can I reduce the number of event cases in the main VI?

I would like to reduce the number of event case of the event structure in my main VI. E.g. I would like to have pop up window with a table when the user double click a table row. Nothing more simple than this: add a case to the event structure trigger by double clicking the table, read the table row ... But in my main VI I would have lots of them and the event structure gets crowded with minor tasks. One solution is using XControls. But is there any other recomended way to handle selected events separatly from the event structure in the main VI?
to clarify: I don't want to distribute the whole event structure. (In this case the code would not be maintainable) But I would like to handle certain context specific events in a differnt place. If I have them all in the main VI the drop down list of the events in the event structure exceeds the windows size and the program becomes difficult to maintain because one looses the overview.

"Strictly forbidden" is not true. But highly not recommended. The reason is simple:
1. Code can react unpredictable. Dennis already stated some things about that in your linked thread.
2. Code is not readable and therefore not maintainable. Each event source should have only one event structure for its events. Since the UI is a single source, events from there should be captured in a single event structure. It is recommended to use this event structure as producer in a producer/consumer design pattern in order not to block the events.
3. You will most propably need timeouts in your event structure which completly negates the advantage of event driven programming. Either use event driven programming or stay at polling. Do not mix (most of all because of maintenance).
Regarding your "advantages" you listed:
- Clustering reduces readability in therefore should never be done. Additionally, it requires timeout cases in most places which is not recommended.
- If you have such many events and interactions in your "sequence", it is a clear indication that you chose the wrong architecture for your application.
Please see attached example. Since i am not used to program with more than one event structure (except if i have different dedicated event sources), the example is "constructed" and therefore may lack of "realism". Nevertheless, it shows some issues which might occur:
- Blocking calls within the events lead to the fact that the UI is not responsive for the event time (FuncA). Nevertheless, interaction is still enqueued and if the blocking call is over, all those interaction are executed. In the example, please press FuncA and then press FuncC immediatly. You will see that nothing happens and after the 5s blocking call, the FuncC dialog appears. You also can switch tabs, but the visual display will update only after the 5s blocking call.
- In order to keep the UI responsive, FuncB is configured not to block the UI. But this is no solution: Press FuncB (on page 2) and the change to page 1 and press FuncA. Additionally, press FuncC. What happens? Just to mess things up, press Stop as well......do this combination several times. It is possible that only the lower loop is finished and the VI is still running even if Stop has been pressed.
Please note everyone that the attached example shoudl strictly be seen as "NEVER DO IT LIKE THIS". This is a negative example and shows the approach which is not recommended by any means!
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Attachments:
Never EVER86.vi ‏10 KB

Maximum Number of Blog Entries on the Main Blog Page

Similar Messages

Maybe you are looking for