Maximum number of connections for MS Access with JDBC

Hi guys,
does anyone know about the maximum no. of connections that MS Access can have with JDBC...

MS Access has not limit. It doesn't work that way.
There is certainly going to be some resource limit however, if nothing else then memory will eventually run out.

Similar Messages

  • How to check maximum number of connection ?

    Hi Guru's,
    How to check maximum number of connections for sender/receiver interface and for RFC's?
    regards
    Vinay

    Hello Vinay,
    I am not sure if your answer is as simple and straight forward as i think it is. Please see my Reply as below and let me know if you need any further details:
    1. How to check connections for RFC in sap pi: Goto the RFC Communication Channel that you are using and there is an option that says "Maximum Connections" that will tell you the max connections allowed .
    2. Max connection to service interface: I did not get which exact component or object you are asking about  (in context to PI) ?
    Regards,
    Tarik Parkar

  • Problem with reached maximum number of connections to database

    Dear Experts,
    Our Production system was not responding properly last week.
    The below was the reply from the Basis team.
    "It seems that we have again problem with reached maximum number of connections to database. We have extended this number to 100 this year and now it seems that it’s not enough again. It seems that something is running on Production, which takes over too many connections."
    They have increased the number to 200 as a work around.
    Do we have any means to find out, which component or application is causing the issue.
    Please advise me if any better way is available to correct the issue.
    Please see the below trace.
    From default trace:
    ======
    Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.R
    esourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to DB or EIS is reached. You
    can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable. 3) Connections ar
    e not enough for current load.
            at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:60)
            at com.sap.security.core.persistence.datasource.imp.J2EEConnectionPool.getConnection(J2EEConnectionPool.java:205)
            ... 61 more
    Caused by: javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to
    DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unr
    eachable. 3) Connections are not enough for current load.
            at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:230)
            at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:343)
            at com.sap.engine.services.connector.jca.ShareableConnectionManager.allocateConnection(ShareableConnectionManager.java:54)
            at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:52)
            ... 62 more
    Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException is thrown by the pooled connection: com.sap.sql.log.OpenSQLException: No c
    onnection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are currently waiting. The connection pool size might
    need to be adjusted.
            at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:192)
            at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:221)
            ... 65 more
    Caused by: com.sap.sql.log.OpenSQLException: No connection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are
    currently waiting. The connection pool size might need to be adjusted.
    ======
    Thanks and Kind Regards,
    Jelbin

    Stop all instances(including DB) and start again, Hope it should work.
    It may happened that jar has not been synchronized with the database and may be version mismatch with the java.
    719778 - Data Source fails to return connection
    1650472 - Transactions are interrupted due to database connection periodically failing to establish
    1138877 - How to Deploy External Drivers JDBC/JMS Adapters
    Change the connection pool so that it can connect to DB as per the note 719778
    Regards
    Vijay Kalluri

  • The maximum number of connections per source ('20') for this connector has been reached by this source IP address

    Receive connector 'Connector Name' rejected an incoming connection from IP address "IP of our load balancer". The maximum number of connections per source ('20') for this connector has been reached by this source IP address.
    I understand that I can up the limit - however, I'm wondering if there is a way to up the limit for ONE specific IP (our load balancer)
    TAG

    It does not look like you can up the limit for a specific IP but you might be able to create a separate receive connector for that IP address (and then change the limit).
    That is just a thought. Others may have more input on why you may or may not want to do that in practice.
    What SMTP traffic would not be coming from the load balancer?
    Is the objective to *not* allow some other (possibly malicious) source from creating excessive connections to the server?
    Otherwise, this is a good discussion about the different parameters that must be considered if you do decide to adjust the values (changing one may not suffice):
    http://letsexchange.blogspot.com/2012/04/receive-connector-rejected-incoming.html
    Nuno Mota's blog (MVP)
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Maximum number of connections in use. Close an act...

    Hi everyone.
    I try to connect my N95 to internet, using "One Touch Access" and USB. It used to be working ages ago! but now, it is impossible. it gets connected with the phone, but when i want to open a web page, it say "maximum number of connections in use. Close an active connection first", and forces me to close my Modem connection, and everything gets disconnected...
    what should i do????
    help please...

    97268450 wrote:
    when i open face book application,the same problem maximum number of connection in use. Close an active connection first. i have nokia 5233
    This issue was already answered by other threads. You can click here and  here for more information.
    Hope this will help you.

  • Maximum number of connections in use?! -E71

    Hi, I have this problem when I try to connect to the internet through any program. Before you rush to reply, I WANT to have multiple programs using the internet at the same time. I find it completely idiotic having to close Nokia Messaging to open my web browser. I want to be able to run Nimbuzz while running Nokia Messaging (example). Funny thing is, if I select OK when it asks me to close a connection, and then just cancel, everything works ok!! Well, for a while, and then the message pops up again.
    Come on Nokia, it's just a simple solution, how hard can it be?
    PS. Using E71 with the latest firmware (200)

    You can use multiple applications using the internet at any time but ONLY one access point can be in use.
    you cant be connected with more then one access point therefore if the different applications is set up to use different access points then you will have the maximum number of connection issues.
    Just like the Computer if you are connected to the internet and you connect your phone as a modem the connection from your phone will overwrite the connection and be the default connection. 
    You may change the settings in the individual applications in the options > settings (may vary from applications)
    Mark me a KUDOS if this has helped...

  • Nokia N8-00 'maximum number of connections in use'

    Hi,
    I have creted another APN in the Destinations-Internet settings. Put this APN on priority 1. Then I se internet an it is ok. But when I open Nokia Maps or another App. Sometimes it tries to connect to the old APN then says 'maximum number of connections in use'. Asking me for confirmation to close one connection.
    So I move all APN's and Wireless connections out of the Destination Internet. Except for the new on that I want. Still the same message From time to time. How to stop thi message. Deleting an APN is not a solution I am looking for otherwise I would have done that.
    Any help is appreciated.

    So the on off method I posted earlier did not work. The first APN is still tring to be accessed by some apps after the phone is switched off and on again. The other things I tried..
    - Removed the APN restriction and renamed the first APN. When I start the APP it now gives me a warning and lets me choose the APN. I choose the second one so greate. Close the APP. Now when I rename the fisr APN to the original name. APPS try to access it again and I get that original error.
    The only thing I could do is configure the first APN name with the actual Access Point of the second APN. This worked All apps are accessing the first APN whaich was reconfigured to look like the new Second APN. 
    This is not a solution again it is a workaround. Does anyone-else have this problem. Or am I the only one who is configuring multiple APNs. Since my provider has multiple APNs.
    I would have thought that this phone supports Multiple PDP contexts, or Secondary PDP context. It was defined in the initial 3GPP specs way back in 2003ish. Nokia can you confirm???
    Cheers Peps!

  • Nokia E90 - Maximum number of connections in use e...

    I invariably get the error - Maximum number of connections in use. Please close open connection - (this is not the exact verbiage of the message) when i connect to the gprs / wap. this started occuring after i updated my firmware from 200.x.x to 210.34.75.
    The funniest part is that the application would connect to wap / gprs if i select cancel and ignore the message and continue.
    If i select Yes, then i will be forced to close at least one application which is connected to the wap / gprs
    I have different access points configured for each application and hence i see no reason for this error message.
    Also, i never had this issue with this phone before, when i was using the same setup; separate access points for the applications which use gprs / wap.
    Please advice as to how i can get rid of this message popping up every time i use wap / gprs.
    Please help....
    Also are there any good navigation softwares with Maps for India available, so that i can use it on my E90 and N82.

    Every time you up-date the firmware, you get from your network opperator the settings for various access points (Internet, MMS, Vodafone Live, whatever....) This leads to duplicates (or even mode) access-points. Moreover, some of these access points are saved as "default" access point in various applications. This is where the mess starts.
    To clean-up the mess, you first have to REMOVE all duplicate access points and keep only one access point for each purpose: Internet connection, MMS, Live (if you are are on Vodafone), etc. After this, you will probably get messages from various applications to define a new default access point. And things will be sorted our automatically.
    Hope this helps, even though it might not be simple for some.
    2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

  • Maximum number of connection in use. Close an acti...

    When I am using nokia maps . A popup message comes in as (maximum number of connection in use . Close an active connection) and an option yes or no . When I press yes . The active connections are displayed there are only one active connections when it is disconnected . An another message comes in as connection needed to continue nokia maps . And when use no message popup again and again and I can't use maps .... I have formatted phone memory and memory card several times and I have updated phone program also . Can you please help me .
     i am using Nokia 5800xpressmusic . model-5800d-1.
                                                                             tankyou
    Solved!
    Go to Solution.

    Hi virajkumar
    Please bear in mind two processes involved here, OVI Maps application which may either be "Online" or "Offline" (spanner icon > Internet > Connection) and Assisted GPS feature utilizing a network access point (Menu > Applications > Location > Positioning > Positioning server > Access point). 
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • E66 - "Maximum number of connections in use. Clos...

    When I try to use the web or Google Maps I get an error message: "Maximum number of connections in use. Close an active connection first."
    I suspect it's related to having a connection going for automatic email but I did not have this message on my N78 or my 6120 classic. I suspect it's NOT related to my service provider since it works fine with the other phones.
    The window that lets you close the active connections only has one to close. It crashes Google Maps pretty hard too.
    I've got the e66-2 (NAM version) I don't know if that makes a difference. Any firmware upgrade for the e66-2 yet?
    Any workaround ideas?
    6133>6131>6120c>N82>N78>e66
    Solved!
    Go to Solution.

    Try quitting the active connection and starting a connection on Google Maps first, the next time. This is not abnormal. And are you sure that you used the same provider and were able to do the same thing without closing connections in the other devices ? In my experience, this is network related.
    Mobile Royale - Latest News, Reviews and Software for Mobiles
    Aero Everyday - Aviation News and Insights
    GoMobile Forums-The best mobile technology discussions
    Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
    Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

  • Create standby maximum number of logfiles for each thread

    The oracle doc states this equation for appropriate number of standby redo log file groups
    (maximum number of logfiles for each thread +1) * maximum number of threads
    How do you get the maximum number of logfiles for each thread and the max thread?
    Thanks!

    If you are running RAC you can, in theory, be running with a diferent count
    of Online Redo Logs in each thread (instance).
    However, normally, you would have the same number of Redo Logs in each
    thread.
    The theoretical max is prescribed at the CREATE DATABASE and can be
    changed with a CREATE CONTROLFILE. If you do an
    ALTER DATABASE BACKUP CONTROLFILE TO TRACE
    the sql script in the tracefile shows the maximum number of logs and members.

  • Maximum Number of Characters for Password??

    Hello, and thank you for reading my post.   I recently modified my Apple ID Password to a very strong password containing 32 characters.  When I try to log into this discussions group with that particular Apple ID, I can't because the website won't accept the password?  Wouldn't all of Apple's sites accept the same password?
    Is there a maximum number of characters for a password in this discussion group?
    Thanks

    What makes you believe that 32 characters is remotely necessary?  As Ralph indicates, a shorter password is equally secure, in realistic terms.  Keep in mind that even if some hacker set up a script to repeatedly try random passwords on your account, they're never going to get in because there are limits on the number of times one can enter an incorrect password before being blocked on any decent system.  You can have a much shorter password, and as long as a human can't guess it from what is publicly known about you, it's secure.

  • Maximum number of users for server SEQ module exceeded

    Hi ,
    I am getting the below error for optimizer SEQ in SCM 7.0 EHP3 system.
    "Maximum number of user for server SEQ module exceeded"
    But the RFC connection works fine and all are green in /sapapo/opt03.
    Should I increase the user in /sapapo/opt03? for SEQ..and on which column...Maximum slot?
    Thanks in advance

    Can you check this thread:
    maximum number of users for server module SNP exceeded
    Divyanshu

  • Maximum number of participants for MeetMe conference

    How do you determin the maximum number of participants for MeetMe conference? All participants will join the conference via the PSTN with the exception of the initiator.

    It depends wether you are using hardware of software conferencing resources. With hardware conferencing resources you can have 32 streams per port on a cat 6K blade so you could either have on conference of 32 participants or 10 conferences of 3 participants.
    For software conferencing it depends whether the conferencing resources are co-residant on the call manager of on a seperate server. If co-residant the max streams is 48 and 128 for a separate server

  • Workflow erro: maximum number of nodes for a session reached

    Hi
       a number of workflows went into error with message maximum number of nodes for the session reached 11000 . what can be the reason . is there some settings thats need to be made in production . because it is working in dr3 and qr3

    Hi,
    Check the condition on the loop for you workflow. It seems its getting into infinite loop.
    Also check for the possibility FM which might be triggering your workflow is getting executed in an infinite loop. So it might trigger multiple instances of the same workflow.
    Regards,
    Niraj

Maybe you are looking for