Maximum Number of driver dimension member - Step Region Criteria

Hi,
In the DEV environment (Version SP1) the limit for the Dimension Member Drive is unlimited but when we made the transport to environmental Quality, this limit was reduced to only
Could anyone help me on this. It would just be a Service Pack update?
Thanks in advance

Hi,
As Lokesh has rightly indicated, please take a look at the below link from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/08/0a76cf635d4d889ebc97b9d21905db/content.htm
Hope this helps.

Similar Messages

Maximum number of Attribute dimensions Possible in BSO Cube

hi,
i have two simple queries :
1 - What are the maximum number of Attribute dimensions Possible in a BSO Cube.
2- How many attribute dimension can be associated with one base Dimension.
hope to get reply soon.
thanks in advance.
Regards
Anubhav

No Limits are defined as such:
How many Maximum number of Dimensions can create ?
Even in the Dbag, it says "many":
A base dimension member can have many attributes, but only one attribute from each attribute dimension.Cheers..
Rahul S.

BPF - Use different step region criteria

Hi All,
   I've a doubt about BPF in step region criteria.
I saw for each step of BPF I must use the same member. But is possible use different member?
I have 3 step.
The first is "OPENING PERIOD" where I execute a copy of data from different month using DATA MANAGER PACKAGE
The second is "INPUT DATA" where I open a input schedule
The third is "CLOSE PERIOD" like the first.
Now, I want enable the "INPUT DATA" for 4 user with different COST CENTER so I can use step region criteria
CC_10001   user1
CC_10002   user2
CC_10003   user3
CC_10004   user4
But I must use the same criteria also in step 1 OPENING PERIOD.
Is possible use only 1 member?
Like :
CC_1001 user1
Thanks,
Marco

Hi Moritz,
thanks you to interested in my problem.
Maybe I explained bad.
In first step -
1. OPENING PERIOD
task: data manager package to copy and transform data
role: Only one user SUPERADMIN
I'd like to excute a copy from JANUARY to FEBRARY for all Cost Center.
In second step -
2. INPUT DATA
task: cost center responsible plans his cost center
role: owner defined in dimension property 'owner' in cost center dimension
I want that different user open same template with different cost center ( I manage it using property OWNER and I think that work well )
The third step -
3. CLOSE PERIOD
task: data manager package to copy and transform data
role Only one user SUPERADMIN
Is similar to first step and I want to copy all cost center in different scenario
Main Problem
When I execute a BPC, and I want excecute step 1 I'd like see only 1 step region and not more.
Unlucky when I create BPF I must use the same data region for all step.

Maximum number of drives OSX will mount?

I have seen that Apple says that OSX can mount an "Unlimited" number of volumes. Does that mean then that I can hook up lets say 100 hard drives?
In a nutshell I am running into an issue having 24 drives show up in OSX SL. Only a maximum of 16 show. I am using an SAS Expander capable RAID card. The Raid GUI show all 24 devices but OSX does not. I am trying to figure out where the failure is happening...

Thanks for the reply. I was trying to get one question answered about the OS but since you asked here's more info. Each drive is just that one drive one partition... All I want to do at this point is have them show up so we can pull data off them as needed instead of using single bay hotswap devices as we have in the past.
I currently have a MacPro 1,1 with a Newer Technology MAXPower RAID mini-SAS 6G-1e1i. OSX Snow Leopard OS. At this stage I am NOT trying to raid anything. I have a 24 bay SAS expander box with an Areca "controller" that feeds the SAS cable to the 24 bays. This card supports up to 128 devices through SAS expanders. When I fill the expander with 24 drives only 16 mount. I was thinking that OSX SL was maxing out at 16 volumes but Apples spec sheets says unlimited volumes in OSX (all versions). Also the internal bays do not seem to have an affect on the 16 number. I can have one or two internal bays filled with varying partitions (I have tried 1-4 meaning a total of 17-20 mounted volumes are showing in OSX.
The webGUI is showing ALL 24 drives in the SAS Expander. OSX is only mounting 16. All the bays work as I can remove drives from the upper bays then the lower bays will mount. It seems the card is working, the GUI is working, but something between that and the OS is limiting to 16 drives.
I am in contact with OWC but it is slow going as they are mixing my support question with another customer with totally different hardware...sigh.
Maybe there is a limit to the number of automatic "pass through" devices? Would PCIe 2 slots make a difference (I am not interested in speed just total drives mounted, although they are already seen by the GUI now)? I am not at the office till later in the week to try other things but thought I would post incase I am missing something simple.

DL380 G9 with P440ar maximum number of drive

I will consider to order one DL380 Gen9 with HP Smart Array P440ar (26x 1.2T )
front 24 drive
rear 2 drive for OS
my questions is Smart Array P440ar support below configuration or not
23x drive RAID 6 group
1x drive hot spare
2x drive RAID 1 group forOS
If support, any limitation of logical drive under this RAID 6 group ?
I need to create 3 x logical drive under it
I think this hot spare drive for this RAID 6 without any problem, how about it can recover OS mirror if rear drive failure

Hi:
You may also want to post your question on the HP Business Support Forum -- DL Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.VQLuBXl0y9I

Get a dimension member with a criteria on property

Hi All,
I added a property CB to category dimension to specify current budget. We add a value "1" to property of member that we want use for Budget. We use it in script logic, for example
select(%version%, %id%, category, cb=1)
xdim_memberset category=%version%
But i want see this current budget in bpc office. How i can get this value in BPC office. C'est a dire, have we any way to get this value like a select statement as above.
Thanks in advance.
Burak

Hi Burak,
In BPC Excel, if you are using EVDRE template, then in the memberset of a particular dimension (A), you can just mention
propertyname = propertyvalue
The above statement will fetch all the members from the dimension A, for which the propertyname is equal to the propertyvalue as per the above statement.
Please refer to the below link:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/13/a6464673df4c97b49a9cb5f62c82ce/content.htm
Hope this helps.

Change description of dimension member based on selection in other dimension

Problem
Let’s say that I have two dimensions Dim Account and Dim Company.
Dim Account consists of Account and Account Description. Each Account has one description for each Company.
I want the description in Dim Account be based on which Company that is selected.
So if Company 1 is selected the description should be set to Account_Company1_Desc if Company2 is selected Account_Company2_Desc should be selected and so on…
If more than one company is selected, the Account_General_Desc should be used.
I would be very grateful if anyone has
an idea of how this problem could be solved.
Best Regards
AL

Hi AL_T,
According to your description, you want to have the description show general_desc when selection multiple companies. Right?
In this scenario, since each company has one description, we should already build the relationship between company and company_desc. However, in Analysis Services, it's not supported to apply MDX expression to make a relationship dynamically. And we
can't make it show different members of a dim based on number of another dimension member selection in query. So your requirement can't be achieved currently.
Regards,
Simon Hou
TechNet Community Support

BPC 75 NW - BPF driver dimension key and description in Data region

Hello All,
In our BPF templates we have used Costctr as our driver dimenion. When we go to My activities to view BPF instances- we only see the Costctr Description in the data region which is the default. In our example- we have muliple cost centers globally with the same description.. so having the key displayed in the step region is critical. Is there a way to specify the key as well?
We are on BPC 75 NW SP07 patch 3.
Any help is appreciated.
Thanks,
Shai

Hi,
"Inherit from Data Region" means - when you open the BPF, you need to specify members for few of the dimensions. These members can be used by specifying "inherit from data region".
For example, if, while opening the BPF, you enter USA for Entity and 2009.Total for Time. If "inherit from data region" is specified for entity dimension, then it will take USA, irrespective of the current view and the fact that the user is owner of some other dimension.
In this case, either you can take it from CV or you can specify the member explicitly while designing the BPF. However, it will not serve your purpose.
When you acces read access to the user for some entity, the user can still view the data. However, he wont be able to send data. So, restricting the view access is not possible in this case.
Hoep this helps.

Maximum number of members in a dimension in ASO 11.1.2.1

Hi all,
Is there any limitations on number of members in a dimension in ASO 11.1.2.1?
Also can we predict the maximum number from the 64 bit theory as described in the DBAG?
I guess the maximum must be more than 20 million which I believe was the limit in Essbase 7.
We are working on an application for customer analysis where number of customer will be much more than 20 million.
Can anyone tell me what is the maximum number of members they have seen in one ASO dimension?
Thanks.

Hi Rav,
Is it somewhere documented about the limitation of 20M members? What I see in the dbag page 34 of chapter 62 is "64-bit Dimension Size Limit for Aggregate Storage Database Outline" where it says maximun bits for a leaf member can be 64 and bits are determined by log2(no of members). From this calculation, number of members can be lot higher. Please let me know if this 20M member limitation is documented somewhere.
Many thanks.

Plsql dynamic region with more than the maximum number of items

Hi,
I need suggestions! :)
I have to make a page with many many items. We have a table storing the content of a SQL script, each statement is an individual row in the table. The page I'm trying to make must display each statement in an individual textbox/textarea (and two others items for different attributes).
In a dynamic plsql region, the maximum number of items seems to be 1990, after that, a "Page not found" is launched. So, after 643 statements, I reach the limit...! :(
A solution could be to generate "custom" textfield or textarea (htp.p('<input type=text name="stmt1" value="StmtText">');), but, is it possible to access their values when the page is submitted ?
Second solution is to make a pagination every 600 statements, but I don't like it!
Anything else ?
Thank you!
Jonathan

Anton,
at least to my knowledge there you will have the same limitation. Because the limitation is that the f procedure of APEX doesn't have more parameters to support more fields. It's not a limitation of the APEX Builder.
It would only work if you assign all your items to the same name, so that they are transfered in an array, like the tabular form.
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

Maximum number of User defined dimensions in Planning v11.1.2

Hi guys,
I am new to Hyperion Planning version 11.1.2, just wanted to clarify what is the maximum number of User defined dimensions that can be added in a planning application.
I've also learnt that the number of Alias tables is more than the previous versions. What is the maximum number of Alias tables in Planning version 11.1.2 ?
Regards.

Maximum number of alias tables is 10 including the default alias table
As for custom dimensions then I wouldn't expect you to hit a maximum unless you want to design a planning application destined to fail.
Cheers
John
http://john-goodwin.blogspot.com/

Is there any limitations to the maximum number of dimensions in MP?

hi all
Is there any limitations to the maximum number of dimensions can be created in Multi provider. If so how what is the maximum number of dimensions that can be created in a multi provider?
regds
haritha

Hi,
Maximum number of dimensions 16. Out of 16, 3 are system defined
1.Datapacket
2.Time
3.Unit
It is restricted to 16 because the maximum no of dimensions in any database is 16.
Reward points if helpful
Cheers
Raj

Maximum number of members in a dimension (BSO)

we are designing a new planning application and the requirement for one of the dimensions may force us to have a large number of members. I needed a ballpark figrue on what the maximum number of members should be in planning for it to work in an acceptable manner (aggregate times, run time calculations etc) ... the number we are looking at is over 30,000 members and another 15,000 shared members 10-11 levels deep. If any one has experience with such large dimension, can you shed some light on how long the aggregation times would take and if we use it in form, how best to agg the RTPs for that dimension? thank you in advance.

Check out below posts:
For facts:
Members in Essbase
Maximum members in a Dimension
For limits:
Maximum members for a Dimension in a BSO cube
Cheers..!!

Maximum number of mountable drives

Is there a maximum number of mountable drives in Leopard? I tried to partition an external drives into 3 while having two other USB drives already mounted and it triggered an error. It seems like there might be a limit of 4 mountable drives. Is this correct?

Is there a maximum number of mountable drives in Leopard? I tried to partition an external drives into 3 while having two other USB drives already mounted and it triggered an error. It seems like there might be a limit of 4 mountable drives. Is this correct?
No. I currently have 6 volumes mounted on my iMac (one being the boot drive, so using your math, I have 5 additional drives mounted). And I've had more then this number of drives mounted in the past.
If you got an error, then there was some other problem. Have you looked at the console logs (Applications -> Utilities -> Console). If you can provide the exact error, maybe someone can suggest a solution.

Maximum number of dimensions for an array

What is the maximum number of dimensions an array can accept:
a. 266
b. 255
c. 256
d. 250
which option is correct and why?

sabre150 wrote:
I don't know and I most definitely don't care since anything more than 2 is, in my opinion, just silly.It's also quite untractable from a memory standpoint. Say you have an 10 by 10 by 10 array. That's 10^3 elements. Now say you have 250 dimensions, that's 10^250 elements which is a huge number in the order of the number of atoms in the universe or so.
Say you instead have just 1 element in each dimension. Then you got a total of 1^250 elements, which is 1 element. That's okay but you don't need the array because 1 element is a variable. This means an array has at least 2 elements in each dimension. That's 2^250 elements which is like 10^75 which is also a huge number. You wouldn't get that kind of memory even if you added up all computers that ever existed.
So array dimensions in the order of 250 aren't just silly, there isn't enougth memory for them.

Maximum Number of driver dimension member - Step Region Criteria

Similar Messages

Maybe you are looking for