Maximum number of filter values in BEx web

Hi
Is it possible to change the maximum number of filter values displayed when running a query?
Example: When the user runs a query and has to put in a material number, he pushes the button which shows him the possible values for input. The number of values displayed per page is 14 and the maximum number of pages is 72. The maximum number of values is 1000. If the user tries to search, he only searches amongst the 1000 possible values. Is it possible to change the number of possible values shown to unlimited?
We use NW04s BI SP09.
Kind regards
Erik

Hi Experts
I have the same problem , the maximum number of hits si set to 200 , ant the variable contains over 300 values , it is a variable based on  a time charactersitic , and the values appear in ascending order , i mean the first 01.1900 , and the last value 03.2012 . i wonder if there is a way to change the order of sort  to descending order . I mean the  first value 03.2012 and the last one 01.1900 . I attach the image .
Thanks for your help.

Similar Messages

  • BEx Analyzer Drop Down Maximum Number of Dislayed Values

    Is it possible to adjust the maximum of 100 (Properties of DropDown>Selection>Maximum Number of Displayed Values)?  I have searched the API and i could not find that setting in there.  Is there a hardcoded global setting that can be changed? 
    Thanks in Advance

    Hi Jon,
    If you are using 7.0 version. Place dropdown in workbook and click to get properties. On Selection Tab you will get maximum number of displayed values. Select the number.
    Regards,
    Kams

  • How to Add a New Filter Value in BEx WAD to Display All Result

    Hi experts,
    I want to add a new filter value in BEx WAD to display all data records. The scenario is as follows:
    The status field can have two values: Active ("A) and Inactive ("I").
    But the requirement is to have a third value to display all the data records (Active + Inactive). E.g. the value can be "G". The purpose is to increase the understandability for report users.
    Does anyone have an idea?
    Regards,
    Joon

    Hi Vineet,
    thanks for your reply. The problem is that there are only 2 values available for this Characteristic: "A" or "I".
    The requirement is to have a third value "G" (instead of the default "All Value") due to historical reason, because all future report users have been working with R/3 reports for quite some time and they are accustomed to using "G" for displaying all values.
    Is there any possibility to realize this?
    Thanks,
    Joon

  • Maximum number of "Single values" accepted in "Multiple Selection"

    Hello gurus. I wonder if you could help me with this.
    You know how in transactions like the Data Browser (SE16), you want to look up records in a table, for example MARA.
    If you want to list only individual values, then you can press the yellow arrow to the right of the fields, and this opens the "Multiple Selection" window. In it you can add single values, ranges, etc.
    My question is, what is the maximum number of single values that you can put in here?
    For example, sometimes if I put like 5000 lines, instead of getting a result I get an ABAP runtime error that reads:
    Runtime errors         DBIF_RSQL_INVALID_RSQL
    Exception              CX_SY_OPEN_SQL_DB    
    "Error in the module RSQL accesing the database interface".
    But if I put around 1500 or less, then I don't have that problem. It lists the results just fine.
    How do I know what the maximum number of lines these functions allow?

    Hi
    Yes even I had the same experience and based on my several tests I dont put more than 2000 valeues.
    Please advice if you have any question.
    Thanks

  • Maximum number of field values for an Authorization object

    Hello Experts,
    What is the maximum number of field values can be put into the role, Is there any restriction for number of values in any authorization field?
    I have put 326 values for field OBJTYPE in authorization object S_DEVELOP but not able to generate the role it is showing error.
    I know I can split the values in two or more instance but wanted to know if there any other way out for this (without creating more instances)
    Thanks
    DK

    If the values for OBJTYPE are not uniquely the same, then the system will not merge them - so nothing will be lost.
    Here is another trick for you: Choose one of the transactions in the role (or create a "symbolic" one for it") where you want to have the OBJTYPE proposed automatically from. Now maintain one or two of them in SU24 and then download it to your PC. Now from the F4 value range of the OBJTYPE, add all of those values you want via copy&paste into the file and then upload into SU24 again. A read old / merge new in PFCG will then swing all the values in for you.
    Single values are always better, as you do not know what else is hidden in the range or might be added in future. It is however common to see FROM / TO ranging around values such as DEBUG and FUGR although all aspects of S_DEVELOP are dangerous - even in display mode.
    Cheers,
    Julius

  • BEx WAD - How to pass filter values to another Web template

    Hi,
    I have a scenario here...
    Web Template 1:
    - Filter options, Filter on Characteristics
    - Button, this button calls Template 2 sending the parameters selected vía URL to filter the report.
    Web Template 2:
    - Tables and graphs
    Values selected in the Filter of Template 1 and using javascript it should generates a URL, which filters the second template i.e. Web Template 2.
    Can anyone please share javascript to achieve this...
    -Anil

    Hi Anil,
    I tried this and could not get it to work.  so if you find away through Java script then I would be very interested.
    There is an option called TRANSFER_STATE which supposedly lets you pass variable names in  this scenario but I could not get it to work.
    In the end I created one template with all graphs etc.  When you click the button to show the other template all tables and graphs in template 2 are shown and everything from web template 1 is hidden.  This worked fine.
    Cheers,
    Nick.

  • Show Multiple Filter Values in a Web Template

    Hello
    I have a Web Template based on a query. On this Web Template I can set multiple single filter values for one characteristic.
    Now I want to show these filtered values for this characteristic on the web item. This is possible for ONE filter value when you use the XML path (f.e. DATA_PROVIDER:DP1?/BICS_VIEW/SELECTION_STATE/SELECTION/CHARACTERISTICS/CHARACTERISTIC[@name='CHARNAME']/SELECTIONS/SELECTION[1]/MEMBER/@text)
    Is there a possibility to show MULTIPLE filter values for one characteristics in a text or input field? I don't want to use a drop down box or the info field.
    Kind Regards,
    Andreas

    HI,
    the best ay to do is create a query with same variable parameters as of the main query and place filter Characters on rows.
    Use this query in one analysis item and use it on top row of the template as Filters information.This will give better look and feel as well solve your requirement

  • Using Portal Variables in filter criteria of BEx Web App query string

    Our BI 7 instance is connected to a NW2004 portal, where we have created SAP BW Report iViews to access templates created with the Web Application Designer.  We would like to use some of the portal variables about the user to create filters for the BEx Web Application Query String.
    The query string would have a set of parameters at the end that looks something like:
    &FILTER_IOBJNM_1=0PLANT&FILTER_VALUE_1=<plant>
    Where <plant> is a value stored in a portal variable.
    Is it possible to do this in the SAP BW Report iView or will we have to code our own custom iView to pick up the variable values?
    Cheers,
    Lee Smith

    Any one?

  • IP Dropdown box - Maximum Number of Displayed Values

    Dear experts.
    Using dropdown box on BEx Analyzer 7.0 only shows at most 99 values on dimension filtering.
    Is it possible to extend that number of values?
    Thanks for your help!

    Solved: If you select 0 as maximun number of displayed values you get all the values.

  • Maximum number of key/value pairs in btree or hash database

    It's not clear to me from the documentation what the limit is on the number of key/value pairs in a Btree or hash database. The documentation on logical record numbers says that the db_recno_t type is a 32-bit unsigned type, "which limits the number of logical records in a Queue or Recno database, and the maximum logical record which may be directly retrieved from a Btree database, to 4,294,967,295". What does "directly retrieved" mean in this sentence? Does this mean that Btree is limited to 4,294,967,295 key/vaue pairs? If so, is this also the limit for a hash database?

    Hi mcgarvek,
    In case of Queue, Recno and Btree configured for logical record numbers - you can do that by setting DB_RECNUM flag: http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_flags.html#DB_RECNUM , the maximum number of records is 4,294,967,295 and after that limit, the next record will be inserted as record number 1.
    In case of Hash and Btree, the maximum database size depends on the page size selected by the application. Berkeley DB stores database file page numbers as unsigned 32-bit numbers and database file page sizes as unsigned 16-bit numbers. Using the maximum database page size of 65536, this results in a maximum database file size of 248 (256 terabytes).
    Database limits: http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_misc/dbsizes.html
    Logical record numbers: http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/logrec.html
    Regards,
    Bogdan Coman

  • BEx broadcaster precalculation variable value shows BEx web analyser iview

    Hi Experts,
    I'm getting this very weird problem on BEx Broadcaster in BI production portal. In BEx Broadcaster, the general precalculation tab, variable value create /change link when clicked show BEx Web Analyser iview instead of variable entry screen.
    This was working fine until two days back when this problem started showing up.
    Users are not able to create new broadcast settings in the production environment nor able to change variables of existing setting which is casuing lot of problem.
    If anyone has faced this issue before please let me know how can this be resolved? Also it will be greatly appreciated if someone can explain how the link is calling the variable entry screen.
    Thanks & Regards,
    Seema Rane

    Hi Experts,
    Can anyone please guide?? We are facing this issue on Production portal and affecting the functaionality.
    Any inputs are appreciated.
    Regards,
    Seema Rane

  • Display Filter Values in BEx Report

    I have a BW query that has a dimension (Unit of Measure, UoM) in the filter area.  The user can only select one value for UoM.  The user selects "Z03" which corresponds to a UoM text value of "lb/1000 gal". How do I  display "lb/1000 gallons" at the top of the BEx report. 
    If this is not possible, I would like to at least display the value Z03 at the top of the report.  I prefer not to devote a whole column in the BEx report to UOM, since the user can only select one UOM.  I am new to BW and this is my first posting.

    Hi Jeff,
    if you have a variable for UoM you can add the value/text of the variable via textvariable to the query title.
    Please ask if you need more advice on this.
    Regards
    Marcus

  • Showing filter values in a web report

    hello experts,
    I have a web report with 3 web item tables, each one has a query assigned. I'm using 0CALMONTH as a filter but the value for this is not displayed when running the web report. Is there a way to display the value for this filter together with the results? Can I use the web item filter?
    Many thanks.
    Inma

    Hi.
    The Web Item Filter only works for filters that are selected manually by the user.
    The easiest way would be to provide a variable for entry of 0CALMONTH. This variable can then be shown with the WebItem Text Element.
    Regards,
    Beat Stoller

  • Set filter value for a web template with java

    hi experts,
    i need to set a variable dynamicaly  depending on the Logon Name. Ok first step i did, i made a small script for the Username:
    _var url = this.location.href;
    _var x = url.substring(url.length-6, url.length);
    _var lifnr = ("0000" + x);
    _alert (LIFNR);
    ok if the username i.e B200221 my variable LIFNR gets a valid value  in this case 0000200221. but how can i use this variable in the bi commands ?
    here my xhtml coding from my webtemplate, where i want to use my variable LIFNR as template parameter:
    _var url = this.location.href;
    _var x = url.substring(url.length-6, url.length);
    _var lifnr = ("0000" + x);
    _alert (LIFNR);
        QUERY_VIEW_DATA_PROVIDER name="DP_1"
                    INITIAL_STATE type="CHOICE" value="QUERY"
                    QUERY value="VSAG_MM_VMI_KONS_US" text="VSAG_MM_VMI_KONS_US" /
                    INITIAL_STATE
                QUERY_VIEW_DATA_PROVIDER
                TEMPLATE_PARAMETERS name="TEMPLATE_PARAMETERS"
                    WEB_TEMPLATE_ACTIONS type="COMPOSITE"
                        ACTION_BEFORE_FIRST_RENDERING type="COMPOSITE" /
                        ACTION_BEFORE_RENDERING type="COMPOSITE"
                            INSTRUCTION
                                SET_SELECTION_STATE_SIMPLE
                                    TARGET_DATA_PROVIDER_REF_LIST type="ORDEREDLIST"
                                        TARGET_DATA_PROVIDER_REF index="1" value="DP_1" /
                                    TARGET_DATA_PROVIDER_REF_LIST
                                   CHARACTERISTIC value="0VENDOR" text="Lieferant" /
                                    RANGE_SELECTION_OPERATOR type="CHOICE" value="EQUAL_SELECTION"
                                        EQUAL_SELECTION type="CHOICE" value="MEMBER_NAME"
                                        MEMBER_NAME value="0000200221" text="0000200221" /
                                        EQUAL_SELECTION
                                    RANGE_SELECTION_OPERATOR
                                SET_SELECTION_STATE_SIMPLE
                            INSTRUCTION
                        ACTION_BEFORE_RENDERING
                    WEB_TEMPLATE_ACTIONS
                TEMPLATE_PARAMETERS
    how can i use my variable LIFNR  at this point :  MEMBER_NAME value="0000200221"    ?
    thanks for any idea's.
    Tony

    hi experts
    does no one have an idea, how i can use my own java variable at   BI Filter  command's in the XHTML Code ?
    thx
    tony

  • Not to filter values in Bex Analyzer

    I am using a selection on a particular variable in Bex. Now in the output if I enter the value 123 for the variable it shows records only related to 123.
    Whereas I need to show some records which dont have a value equal 123 alongwith 123.
    basically all the records which are present in the E_T_DATA.
    Thx

    Hi Raja Sekhar,
    If i enter variable 123 or any other value, i need it as a reference for some calculations and data which i get includes this value as well as other values.
    So since i have a selection on this variable only 123 shows up in the output, rest of the values getting filtered out.
    Is it clear now?
    Right what Mahesh has suggested dummy variable seems to the way to go forward, as if i use using text variable i am not allowed to modify any customer exits.
    But plz help if u can think of some alternatives
    Regards,
    Nitin

Maybe you are looking for