Maximum number of FW devices under 10.4.11

What is the maximum number of FW devices supported on a 2005 Late Model G5 under OS-X 10.4.11?
Thank you!

Have a look at > http://support.apple.com/kb/TA26476
{quote:}Question 5: How many FireWire devices can be connected at any one time?
Answer: Fire Wire can work with up to 63 devices on a bus. The number of bus-powered devices you can connect depends on the amount of power available from the computer, and the amount of power required by each device.{quote}
For more info:
see > http://support.apple.com/kb/HT2952
and > http://en.wikipedia.org/wiki/FireWire
Dennis

Similar Messages

  • CallManager 7.02 Maximum Number of Registered Devices

    We are currently running CallManager version 7.02 with the following configurations:
    One Publisher and two Subscribers
    CM Groups - 2
      Sub1-CMG (used by 9000 devices)
        Sub1
        Sub2
        Pub
      Sub2-CMG (used by 4475 devices)
        Sub2
        Sub1
        Pub
    Maximum Number of Registered Devices - 10000
    1) We just added some more devices that changed to number of devices to:
     Sub1-CMG (used by 10050 devices)
     Sub2-CMG (used by 4475 devices)
    So, some of the new devices did not get registered with CallManager.
    2) We changed the Maximum Number of Registered Devices to 12000
    When we checked the new devices, there were still some that were not registered.
    3) If we move the new devices to Sub2-CMG they register with CallManager.
    Any thoughts here?

    Since you are on CUCM 7, this means your cluster is running on MCS servers, from memory I think the top level MCS server in CUCM appliance mode supported upto 7500 phones per server. So you may be running into a hardware limit. Although you can configure I guess upto 15000 phones in the CUCM service parameter but still the MCS appliance mode had the 7500 phone/server limit with a max of 30,000 phones per cluster.
    So either you have a MCS 7845 I2 or H2 the limit is 7500 per server (I am guessing you have top model of the MCS from number of phones you have otherwise limit will be further lower):
    http://www.cisco.com/c/en/us/products/collateral/unified-communications/7800-series-media-convergence-servers/product_data_sheet0900aecd80572724.html
    -Terry
    Please rate all helpful posts and mark the thread as answered if  you have no other queries

  • Maximum number of concurrent devices that could be used with embedde oracle

    Hi,
    How to know what will be the maximum number of concurrent devices that could be used with embedded oracle?
    Any help will be needful for me
    Thanks and Regards

    user598986 wrote:
    How to know what will be the maximum number of concurrent devices that could be used with embedded oracle?Please define 'embedded Oracle'.
    I assume you are talking about an Oracle-supplied database engine. Currently Oracle has several database engines: Oracle Database (Personal/Enterprise/Standard/Express); Oracle Berkeley Database; Oracle Times Ten Database; (iirc) InnoDB Transactional engine; and down the road possibly MySQL.
    Many people mean Berkeley when asking this kind of question, but sice you ask it in an Oracle Database forum as compared to a Berkeley engine forum, I am not quite sure.
    If you indeed mean 'Oracle Database', then it is a lecense question that needs to be discussed by you license people and Oracle sales.

  • Maximum Number of USB Devices...

    What is the maximum number of USB devices able to be connected to the new AirPort Extreme via a powered USB hub? In other discussions it said "officially" three devices. What is meant by "officially", and could I add more? Also, if these devices are USB external hard drives, can I access them from any computer connected to my network via either WiFi or Ethernet? If so would they apear in the Finder sidebar like normal and what would transfer speeds be like? (I own a MacBook Pro w/ 802.11a/b/g/n)
    ...One more thing, would I be able to set up automatic backups to one of these hard drives using Time Machine even though they're connected to an AirPort Extreme not a Time Capsule?

    What is the maximum number of USB devices able to be connected to the new AirPort Extreme via a powered USB hub?
    In theory, just a bit over 125.
    Also, if these devices are USB external hard drives, can I access them from any computer connected to my network via either WiFi or Ethernet?
    Yes
    One more thing, would I be able to set up automatic backups to one of these hard drives using Time Machine even though they're connected to an AirPort Extreme not a Time Capsule?
    Yes, if you are asking about the "new" AirPort Exteme. Otherwise, no.

  • Setting maximum number of image buffers in MAX in IMAQ vision builder

    To aquire large number of images using duncan Technologies Camera (7f/s) on IMAQ PCI 1424 i'm supposed to set the maximum number of buffer images in MAX(Measurement and Automation)in IMAQ vision builder. But i do not see the option for specifying the maximum number of image buffers under the properties of PCI 1424. Please advise.
    Thanks in advance.

    The setting is somewhat difficult to locate.
    In MAX, select "Tools" on the main menu bar. Under that, select "IMAQ". The only option that comes up is "Max number of buffers".
    Bruce
    Bruce Ammons
    Ammons Engineering

  • Maximum number of airport expresses on a network

    Hi,
    I'm using a time capsule and have three airport expresses connected to extend my wifi network. When I connect to the third airport express, all my devices cannot connect to the wifi network. The problem is resolved when I unplug the airport express and connect to the time capsule directly.
    I was wondering if there is a maximum number of airport expresses that can be deployed on a network to extend the wifi connection.
    Thanks

    Apple does not provide a maximum number of extending devices for a network in their documenation, but the practical limit would probably be in 4-5 range. I've used 4 extending devices in the past with good results.
    I"m assuming here that you are using the "extend a wireless network" setting on the AirPort Express, correct?
    This setup works like the hub and spokes of a wheel. The main router is the "hub" and each of the AirPort Express devices reside at the end of a "spoke". The devices at the ends of the spokes communicate directly to the hub, not to another device at the end of a spoke.
    So, in an ideal setup, your main router would occupy a central location in the home and the AirPort Express devices would be located approximately equal distance from the main router.
    Can you provide a few more details on your setup?

  • I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this?

    I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this? I thought I could maybe set up the account on my PC and go from there, but it won't let me do that. It is forcing me to set up on the iPod. Am I doomed to have no iCloud account because I opted for a used device?

    See this previous discussion.
    icloud: The maximum number of free...: Apple Support Communities

  • Syncing & maximum number of devices for one app?

    I am setting up five iPads for a small business.  They are supposed to be identical -- same Apple ID for all of them, same apps, files, settings, &c.  I am still working out some of the syncing and access restriction settings.  However the business posed a question to me, and I haven't been able to find an answer online:
    If an app is purchased once, on how many devices may it be installed?
    That is, if an app is purchased for this business on one iPad, can it be downloaded onto the other iPads without further payment?  Is there a maximum number of iPads onto which an app can be installed, with additional devices incurring extra fees?  Would this number vary by app, and if so, is there a way to find out the maximum before purchasing and installing the app?

    http://support.apple.com/kb/ht4627

  • ICloud error "Maximum number of accounts activated on this device

    I keep getting the error "Maximum Number of acounts activated on this device whenever i enter my apple id and password in the iCloud option. Please help me..

    Welcome to the Apple community.
    It sounds as though you are pressing the "create Apple ID" button when trying to log into your account. You shouldn't use this button, it sounds as though you have used it a few times and have now used up all of your free accounts on that device.

  • This Apple ID has already restored to the maximum number of devices in the last 90 days

    Has anyone seen this error message "This Apple ID has already restored to the maximum number of devices in the last 90 days"? We get this when we use iCloud to restore a master backup to iPads in a school computer lab. The first 9 or so restores go without a problem and then we start getting the error. The iPads are running iOS 5.01.
    We previously used iTunes to do the restore and did not have a problem, but it takes a long time to deploy to the 25 iPads. We were hoping that using iCloud would be faster.

    9. You’re limited to a maximum of 10 devices. With the ability to re-download content from everywhere, Apple has limited the number of devices that can participate in iTunes in the Cloud for a given account. The new terms allow for a total of 10 devices, five of which can be computers running iTunes. This means you could have five iOS devices and five computers authorized, or one computer and nine iOS devices, or any combination of the two.
    Fortunately, this limitation only applies to iTunes in the Cloud features—you can still sync content directly from an authorized iTunes library to an unlimited number of iPods or iOS devices; the limitation only applies to authorizing devices to re-download or automatically download content directly from the iTunes Store.

  • Maximum number of devices per icloud account

    I work for a University and we would like to have all of our Apple devices on one iCloud account for ease of management.  What is the maximum number of devices that can be registered on one iCloud account?
    Thanks,
    Natasha

    10 per Apple ID.

  • What is the maximum number of devices that can be connected with FaceTime?

    I have tried to find in theh Apple web pages the maximum number of devices that one can connect to with FaceTime. Specifically, how many iPad2 or iPad (new) devices can connect to each other with FaceTime? What about an older iMac running Mountain Lion with iPads? Or, iPhone4s and iPads? Thanks for any information you can provide.

    I don't know of any limit, as long as each device has its own individual identification ( e-mail address, or phone number for iphones)

  • TS4036 Help plz this massage comes up when i restore from iCloud.  You have reached your device limit also says Ur apple id has been restored to the maximum number of the time last 90 days.

    Help plz this massage comes up when i restore from iCloud.  You have reached your device limit also says Ur apple id has been restored to the maximum number of the time last 90 days.

    Have you shared your AppleID with anyone - family member or spouse?  Any given AppleID can only be associated with 10 devices at a time (five of which can be computers).  Once you reach that limit, the 90 day timeout applies before that AppleID can be associated with another, new, device.
    You can see the explanation here - http://support.apple.com/kb/HT4627
    All you can do is wait the 90 days, sorry but I know of no way around that.  If you think the message indicates an error though, then use the Express Lane web support pages to send a note to the AppleID support folks.

  • My device says, "Maximum number of iCloud coounts have been logged on". What should I do now?

    My device says, "Maximum number of iCloud accounts have been logged on"
    Someone help m, what should I do now to start using iCloud on my same device?

    Each device can only create a maximum of three iCloud accounts.  Once those have been create and you try to create another you get this message.  You cannot delete one of the previous accounts in order to create another one.  All you can do is either re-use one of the accounts previously created, or create a new account to use on another iOS device (running iOS 5 or higher) or Mac (running OS X 10.7.2 or higher) and sign into the account on your phone.

  • Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

    Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

    50 users per device, assuming that the "main" router is setup to deliver an adequate number of network IP addresses for all devices.
    2 AEBS = 100 users, but that is really more of a theoretical max. 
    If you really need 100 connections, it would be much better to use 3 AEBS to spread things out.

Maybe you are looking for

  • Canon powershot g11 not connecting after mavericks update

    After update to Mavericks cannot connect my Canon Powershot G11, led ligts blinks green on camera, Preview opens, but not showing photos from camera and window not opens. Whats up?

  • How to restore library from backup on external hard drive

    I am helping my wife move her library to a new computer after the old one crashed. I backed up my wife's music library to an external hard drive by simply copying and pasting all the files in her My Music >> iTunes folder into the external hard drive

  • OS X freezes when on loading screen

    I was listening to iTunes and OS X crashed and I had to restart my computer. i opened it again and it crashed my computer again. Then after i restarted i decided to not mess with iTunes and try photoshop, that crashed my computer i had to restart and

  • Formula variable with User Exit

    Hi, Can we create a Formula Variable of processing type USER EXIT...which will display a constant Value Y Any syntax would be helpful Thanks

  • Client Proxy--unable to edit Execute Asynchronous method !!!!

    Hi All, With Reference to the blog stated below /people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies I tried to write code inside the Execute Asynchronous method. But I was unable to edit the method and it comes as can not