Maximum number of hits in Document overview (ME21N/ME22N/ME23N)
This number is defaulted to 5000. The help text states that it is the maximum number of hits that are to be displayed.
In my opinion this relates to the result.
In reality I notice that it relates to the first selection in the database.
For example.
All purchase order for a given vendor (+9000 PO-items in the database, 110 without history).
Selection of PO's without goods receipts.
Using the the default value of 5000, the program gives the message "No suitable documents found"
After clearing the max. number of hits, the correct selection is made.
Suppose I would like to see the 10 oldest open PO's, this would not be possible.
Is my assumption correct ?
Hi,
I think there´s something not working correctly in your search, as the 5000 refers to the maximum number of hits that will be shown. I would recommend to open a ticket at SAP.
Best Regards,
Arminda Jack
Similar Messages
-
5000 hits in document overview
Hi,
When I clicked on "Document overview on" in (left side of) ME23N transaction , I am getting a pop-up saying that "You have limited selection to 005000 hits (Note that there are more hits)".
Message no. MEQ010.
I have more number of PO items to be displayed. Is there a way to change that maximum number of hits? In general, we can change that, if we select Purchase orders or Purcahse requisitions in that drill down. But in my case, the moment I clicked on "Document overview on" it is giving that message and after that it is giving the POs created by me. It is directly going to My Purchase order. Please help.
Thanks,
ArunHi,
Thanks for your reply.
I am using "My Purcahse orders" in that list. For all others, it is showing a selection screen where we can change the maximum number of hits. But in case of my purchase order, it is not showing any selection screen.
When I click on that document overview on, it is giving that message and then directly showing all my purchae orders.
Please advise.
Thanks,
Arun -
Maximum number of hits when searching in PA20
Hi,
when in PA20, I perform a search based on (for example) last name and I only enter a * as search criteria (in other words I perform a search on all employees), in our development system the maximum number of hits displayed is 5000.
In our testsystem the maximum number of hits is not maximized.
Does anyone know whether this is a general setting? If yes, which setting is this?
If this is not a general settings, how is determined whether the hit list is maximied to a certain number of hits or not.....
Wilfred.Hi
You can change the Maximum No.Of Hits in the below manner.
Go to your desired transaction .Here PA20 there select the menu Help where u can see in the screen top.
From Help,select the last sub menu i.e Settings.
You will get Tabstrips with 3 tabs.select the tab F4 Help.
There u can find the option to change the "Maximum Number of Hits to be displayed"
Regards,
Sree -
Change of maximum number of hit in a report
Hi Guys,
Can any one help me to solve the following:
In KSB1 reprot the maximum number of hit by default is 5000.
It appear in KSB1 --> More Setting ---> Maximum Number of Hit
where can we set the default maximum number of hit so that every time I don't need to change it.
Thanks in advance.
Regards,
sp sahuHi ,
go to SE16 , enter table name RSEUMOD, enter ,
select "TBMAXSEL" and execute, u will get a list of all users , against a username , there will be a field TBMAXSEL, click on the pencil icon on top of table, inside the table against the field TBMAXSEL , enter the desired number of hits and save
Regards
Mangesh
Reward points if it helps -
ABAP runtime error while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N
Dear All Expert,
I am facing problem while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N,
Please find the below ABAP Runtime Error.
Runtime Errors LOAD_TYPE_VERSION_MISMATCH
Date and Time 10.02.2011 11:13:07
Short text
Change of a Dictionary structure at runtime of a program.
What happened?
Runtime error
The current ABAP program "CL_IM_WRF_MM_PROC_PO==========CP" had to be
terminated because one
of the statements could not be executed at runtime.
What can you do?
Restart the program.
If the error persists, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY"
changed
during the flow of the transaction.
As the type was already used in the old version
and in the new type should be used in the same transaction in the new
version, the transaction had to be cancelled to avoid inconsistencies.
How to correct the error
Try to restart the program.
System environment
SAP-Release 700
Application server... "iqe"
Network address...... "172.25.0.85"
Operating system..... "Linux"
Release.............. "2.6.9-55.ELsmp"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "iqe"
Database type..... "ORACLE"
Database name..... "IQE"
Database user ID.. "SAPSR3"
Terminal................. "MUMJML5727"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Dec 26 2010 20:17:07"
create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 285
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 16192
EM...... 25139088
Heap.... 0
Page.... 40960
MM Used. 8038136
MM Free. 4528408
User and Transaction
Client.............. 600
User................ "JKMM"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D524AD1FD7A42F9E1000000AC190055"
Program............. "CL_IM_WRF_MM_PROC_PO==========CP"
Screen.............. " "
Screen line......... " "
Information on where terminated
The termination occurred during generation of the ABAP/4 program
"CL_IM_WRF_MM_PROC_PO==========CP".
The termination occurred in line 213
of the source code of program "CL_IM_WRF_MM_PROC_PO==========CM007" (when
calling the editor 2130).
Source Code Extract
Line SourceCde
183 DATA: l_flag TYPE wrf_pbas_boolean.
184
185 CALL FUNCTION 'WRF_POHF_MSG_READ_PREVIEW_FLAG'
186 IMPORTING
187 e_preview_flag = l_flag.
188
189 IF NOT l_flag IS INITIAL.
190
191 DATA: l_header TYPE REF TO cl_po_header_handle_mm.
192
193 MOVE im_header ?TO l_header.
194
195 CALL METHOD l_header->if_output_mm~preview( ).
196
197 CALL FUNCTION 'WRF_POHF_MSG_RESET_PREV_FLAG'.
198
199 ***$ Widening Cast for printing information.
200 ** CALL FUNCTION 'WRF_POHF_STORE_PRINT_INFO_SET'
201 ** EXPORTING
202 ** im_header = l_header.
203
204 * Printing Preview
205 * IF NOT gv_preview IS INITIAL.
206 * CALL METHOD l_header->if_output_mm~overview( ).
207 * CALL METHOD l_header->if_output_mm~preview( ).
208 * clear gv_preview.
209 ENDIF.
210
211 * ENDIF.
212
>>>>> ENDMETHOD.
Internal notes
The termination was triggered in function "ab_RxDdicStruShareFailed"
of the SAP kernel, in line 2539 of the module
"//bas/700_REL/src/krn/runt/abtypload.c#11".
The internal operation just processed is " ".
Internal mode was started at 20110210111306.
Name of the changed type......: "WRF_POHF_KOMP_STY"
New version of the type.......: 20070508193207
Old version of the type.......: 20070508193207
New user......................: "Type" "WRF_POHF_KOMP_STY"
Version of the new user.......: 20070508193207
Old user......................: "???" "???"
Version of the old user.......: "???"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(CTrcStack2+0x78)[0x6cbb78]
(CTrcStack+0xb)[0x6cc17b]
(ab_rabax+0x3be5)[0xb8d985]
(_Z24ab_RxDdicStruShareFailedPKtm4RUDIS0_S1_S0_+0x163)[0xb16823]
(_Z19ab_GetDdicTypeIndexPKtm4RUDI+0x1f6)[0xb0dbb6]
(_Z11ab_LoadViewPtjPKtPK11PROGRAMHEADPj+0x27e)[0xb16ede]
(_Z18ab_GetDdicTypeLoad4RUDI+0x6e)[0xb1705e]
(ab_GetView+0xc1d)[0xb0ee1d]
(_Z20CompressInitRcByDatajPK6CG_DIRjjS1_jj4RUDIPKhj+0x60d)[0xe32b2d]
(_Z21cg_CompressStackFrameP4TRIGjj+0x169)[0xe33399]
(_Z8cg_blkleP3ENV+0x75f)[0xe4779f]
(_Z9sc_cblklePKt8ENV_KINDP7SC_INFO+0x394)[0xe90024]
(sc_blkle+0xdd)[0xec6e4d]
(rs_oper_abap1729+0x37)[0x10eb237]
(rs_expan_abap+0xa1996)[0xfd7a2a]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_inclu+0x5fa)[0xe0d50a]
(rs_oper_abap2160+0x3a)[0x1115d6a]
(rs_expan_abap+0xcd41d)[0x10034b1]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_checkStart+0x41)[0xe1ac51]
(cg_generate+0xb65)[0xe57755]
(ab_gabap+0x14a)[0xb01a5a]
(dy_gen_abap+0x63c)[0x74428c]
(ab_genprog+0x13d3)[0xb03d13]
(_Z17ab_LoadProgOrTrfoPKtjPj+0xb56)[0x8f9ab6]
(_Z11ab_LoadProgPKtj+0x11)[0x8f9ca1]
(_Z15LoadGlobalClassPKtjjj9ClasState+0x24c)[0x958c2c]
(_Z11FillCfixIntPK4CREFP4CFIXjj9ClasState+0x214)[0x957404]
(_Z11ab_FillCfixtj+0x65)[0x957ae5]
(_Z26ab_CrefToCladId_ActivateOKtPh+0x7d)[0x957b6d]
(_Z8ab_jaboov+0x623)[0x959793]
(_Z8ab_extriv+0x607)[0x8ba9c7]
(_Z9ab_xeventPKt+0x1c1)[0xa1c021]
(_Z8ab_triggv+0x9c)[0xa1c77c]
(ab_run+0x97)[0xbde5c7]
(N_ab_run+0x9)[0x736359]
(dynpmcal+0x669)[0x7333b9]
(dynppai0+0x8eb)[0x734d9b]
(dynprctl+0x3e9)[0x733db9]
(dynpen00+0x4a5)[0x726eb5]
(Thdynpen00+0x359)[0x541bd9]
(TskhLoop+0xc49)[0x54d999]
(ThStart+0x20f)[0x55b29f]
(DpMain+0x2da)[0x4bd49a]
(nlsui_main+0x9)[0x4910c9]
(main+0x33)[0x491103]
/lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3cde51c3fb]
Please help me to resolve the issue.
Thanks & Regards
SKKread this part again: The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY" changed during the flow of the transaction. As the type was already used in the old version and in the new type should be used in the same transaction in the new version, the transaction had to be cancelled to avoid inconsistencies. How to correct the error Try to restart the program
how often had you restarted ME21N before you posted this message?
In best case this message appears only once, because the program / or dictionary was changed while you executed ME21N
If many times, then contact your ABAPer, because then he probably did not transport all objects that were changed, or the objects have to be regenerated in your system. -
How to add a custom button on Application Toolbar for ME21N, ME22N & ME23N
Hi Experts,
I am new to this forum. I hope someone will help me.
My Requirement is as :
I want to add a new custom button on Application Toolbar for ME21N, ME22N & ME23N.
There are already standard buttons in this toolbar which is Document Overview On, Hold, Personal Settings etc.
So after the 'personal settings' button i want add a new button and want to write a code which will open one custom screen.
I am not able to find any exit for this....
Please help...
Thanks....Hey Buddies
Try below BADI : ME_PROCESS_PO_CUST
and check with required methods.
1)PROCESS_ITEM
2)CHECK
3)POST
Regards,
Pranav -
In transactions ME21n, ME22n, ME23n I need to add new field to item detail
Hello,
In transactions ME21n, ME22n, ME23n I need to add a new field to the table control TC_1211, in SAPLMEGUI screen 1211 for PO line items. The new field is UNSPSC Code, a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
BADI ME_PROCESS_PO_CUST enables you to extend the business logic of the Enjoy purchase order. Is this the correct BADI to use for the purpose of adding a new input/output field to the PO detail SAPLMEGUI screen 1211?
Does anyone have any examples of adding a new field to PO Item Detail screen using BADI ME_PROCESS_PO_CUST? I have had some experience creating Badi's, and would appreciate very much some sample code if possible.
We are on release SAP ERP Central Component 5.0
SAPKB64018 SAP Basis Component
SAPKA64018 Cross-Application Component
SAPKH50013 Logistics and Accounting
Thank you,
VictoriaHi,
Thank you for the response. I tried this and found Badi ME_PROCESS_PO_CUST. Do you have any examples of adding a new cust field to PO Item overview screen using badi ME_PROCESS_PO_CUST? I have had little experience creating badi's, and would appreciate very much some sample code if possible.
In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
Can you tell me if method FIELDSELECTION_ITEM of badi ME_PROCESS_PO_CUST the correct one to use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
Thank you for help - much appreciated,
Vicki -
ME21N, ME22N, ME23N call ME12 instead of ME13
Hi
Our users would like to be able to go from ME21N, ME22N, ME23N and directly to ME12, so that they can make changes in the info records.
As standard the transaction codes ME21N, ME22N, ME23N calls up ME13 which is display mode of the info recrod.
I have some concerns to make this change and that is weather the changes made in ME12 will take effect in ME21N if they are creating a PO and want to make changes to the info record.
The other thing is that it might be difficult to control the changes made in the info records if it is possible to do this "on the fly" and not consider the consequenses of the change, other than to satisfy and here-and-now need for a certain issue.
If we want to proceed with this, how would I do this the best way to call up ME12 in stead of ME13.
Best regards
Birgitte Hamborg JakobsenHi,
I cant understand why you want to go to ME12 directly instead of ME13 from ME2*N transactions. In case the user want to change anything, he can go to menu - info record - change from ME13 directly. I dont think its worth spending time and effort to change it to ME12.
Even though you change anything in info record from ME2*N transactions, the changes wont reflect back to your PO. The changes will be reflected in new PO only, not in already created documents.
Regards,
AKPT -
Material descri screen level field greyout in ME21N/ME22N/ME23N-Urgent
Hi,
I have a requirement in ME21N/ME22N/ME23N is that when i want to change a PO, the material short description field should be grey out after the material is entered in the item level.
Can anybody suggest me how to do screen level field greyout in ME21N/ME22N/ME23N.
Thanks in advance,
EsakiHi,
This query can be solved by modifying some configuration part. Your MM consultant in project can do this or you can also try this following meintioned path: Goto tcode SPRO
SPRO>Materials Management>Purchase Order-->Define Screen layout at document level.
In this screen layout for the mentioned transactions ME21N/ME22N/ME23N ,material short description field can be greyed out by selecting display mode for that field.
For more clarification refer documentation against this point in SPRO.
Hope this solves your problem.
Regards,
Brajvir -
Needs to be Hide Additional Planning button on ME21N/ME22n/ME23n
Hi All-
Is there anyway we can disable the 'Additional Planning' push button on 'ME21N/ME22N/ME23N' either using user-exit or 'BADI's?
Please let me know..
Thanks,
Sonyusing transaction variants we can disable the additional planning button in the me21n/me22n/me23n
transaction code for creating a transaction variant is SHD0. -
Badi for me21n,me22n,me23n
HI experts,
CAn any one help me out infinding a badi for me21n,me22n,me23n, which triggered on every press of enter key or some other check, so that i could kept a validation for the header and item fields of the t.codesHi,
Go for BADI,
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Reward points if useful....
Regards
AK -
Print preview in ME21N/ME22N/ME23N
Hi!
In transactions ME21N/ME22N/ME23N we can see PO print preview after we click Print preview button.
Is it possible to deactivate upper toolbar in this preview??
Or deactivate: Go to -> 'View list' in this toolbar?Thanks for your answers.
Now, I have another question:
How can I transport transaction variant assigning??
On developer system I created transaction variant, variant group and assigned users to it.
It works perfectly.
Transaction variant and variant group I assigned to Workbench request and transported it to Test System 1 (TE1)
Assigning user to variant group I assigned to Customizing transport and transported to Test System 1 (TE1).
However it doesn't work correctly on TE1.
I have to go again into SHD0 on TE1 and assign users to variant group. Then it works.
Now I have acces to TE1 to SHD0 but I will don't have it soon.
How can I transport transaction variant assigning??
How can I activate my variant globally? For all users??
I typed * in User field. Is it correctly??
regards,
Michal -
New tab implementation at item level in ME21N/ME22N/ME23N.
Hi Friends,
I have implemented two badis 1. ME_GUI_PO_CUST and 2. ME_PROCESS_PO_CUST to get a new tab at item level in ME21N/ME22N/ME23N, I could see this new tab only in ME23N but not in ME21N/ME22N, and I found that Badi ME_PROCESS_PO_CUST is not getting triggered for any of these tcodes : ME21N/ME22N/ME23N. Can anybody help me getting this issue resolved with coding example as well.
Thanks in Advance.Hi Know ,
I know that we have to use the following BADIs
ME_PROCESS_PO_CUST
ME_GUI_PO_CUST
But I does not know what are the methods to be implemented
and what is the code we have to write in that methods .
Thanks in advance ,
Siva. -
New Tab on header level for me21n/me22n/me23n
Hi Friends
i have created a new tab on the me21n/me22n/me23n header level using the exit
MM06E005 , The tab is displayed but i am not unable to udate the records into the
EKKO Table whereas i have added my field in the include of EKKO CL_EKKODB
Kindly somebody help me with elaborated steps .
Thanks & Regards
Digvijay RaiHi Digvijay,
Once the data is entered on the screen ..code is written to update the table ie...
flow of data from custom screen for header is OK..but for display and change we need to
import the data in a similar manner to the customer subscreen or the tab added in header level
As you can see the following 3...code must be done in EXIT_SAPMM06E_006/007 to fetch data to customer subscreen for display/change actions..use 006/007 for PBO/PAI actions..
EXIT_SAPMM06E_006 Export data to customer subscreen for header(PBO)....INCLUDE ZXM06U36
EXIT_SAPMM06E_007 Export data to customer subscreen for header(PAI)....INCLUDE ZXM06U38 .
EXIT_SAPMM06E_008 Import data from customer subscreen for header
Pls check and revert..in addition
go to smod->MM06E005-> "documentation" -> Display to read more on documentation about data flows and exits used for it
Hope it helps
Regards
Byju -
How to make the custom field enable/disable in ME21n/ME22n/ME23n trans
Hi Experts,
I need help.
I have created one custom field in the transaction ME21n/ME22n/ME23n under customer data 2 tab. But my problem is the field is always in enable (means editable only) even in Display mode. How to make the field is non editable in display mode and editable in change mode.
I have tried by putting some logic to make that field to change alternatively according to change/display button. And it is working fine but if we click any othe button , this field is becoming editable even in display mode.
How to make this field to behave as standard fields?
Please reply me <removed by moderator>
Thank you in advance.
Best Regards,
Divakar.
Edited by: Thomas Zloch on Mar 2, 2012If you have BADI implimented for custom tabs then you can do this in method ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM
lv_changeable = im_header->is_changeable( ).
LOOP AT ch_fieldselection ASSIGNING <fs>
IF lv_changeable IS INITIAL.
<fs>-fieldstatus = '*'. " Display
ELSE.
<fs>-fieldstatus = '+'. " Change
ENDIF.
endloop.
Maybe you are looking for
-
Stock (As on Date ) in MB5B
Dear All, I want stock mentioned in Stock on (wrt from date ) in MB5B Transaction. Please tell me any function module or BAPI is available for that.else tell me the table wise logic to get it. Scenarion. 1) Go to MB5B Tcode 2) Enter Material, Plant
-
Mighty Mouse won't scroll up, only down
I had this problem again tonight, but this time a restart didn't work. So I took the mouse and turned it upside down, and rolled with pressure the scroll ball on my mouse pad. I rolled in all directions, then plugged it back in. It worked. Which lead
-
Hiding Payment / Receipt Tab in Cash Journal
HI Experts Please tell me how i can Hide Payment / Receipt Tab in Cash Journal Full point will awards... MAZ
-
Transfer to R/3 using mixed periodicities is not allowed
Hi, We are in the process of implementing DP for one of our clients, We are facing the following problem, while releasing the Demand ( as PIR) to SAP R/3. Transfer to R/3 using mixed periodicities is not allowed We have maintained below mentioned ste
-
Revision: 20927 Revision: 20927 Author: [email protected] Date: 2011-03-20 11:48:41 -0700 (Sun, 20 Mar 2011) Log Message: Didn't realize I also needed to modify SerialContext.java in addition to AbstractEndpoint.java to change the default max o