Maximum number of Item Master Data

Hi! is there anyone, who used SAP B12007 for more than 1,00,000 item master data? I would like to know the issues in this context, if there is any.

Hi
Your question is good, but in SAP there is no limit. The main thing is yr system Requirement will be better to give fast and rapid performance.
U can enter as many item u can no limit from SAP side.
Size in MB as per SAP DB size
Document Type     Avg # documents per day     Avg # line items per document     Avg KB per document*     Est. MB volume year 1*     Est. MB volume year 2*     Est. MB volume year 3*     Est. MB volume year 4*     Est. MB volume year 5*     Est. MB total     year 5*
Purchasing - A/P
Purchase Order     1.0     1.0     6.11     1.49     1.64     1.80     1.98     2.18     9.10
Goods Receipt PO     1.0     1.0     5.99     1.46     1.61     1.77     1.95     2.14     8.93
AP Invoice     1.0     1.0     4.79     1.17     1.29     1.41     1.56     1.71     7.13
Outgoing Payment     1.0     1.0     1.44     0.35     0.39     0.42     0.47     0.51     2.14
Sales - A/R
Sales Opportunity     1.0     1.0     9.88     2.41     2.65     2.92     3.21     3.53     14.73
Sales Order     1.0     1.0     5.58     1.36     1.50     1.65     1.81     1.99     8.31
Delivery     1.0     1.0     6.64     1.62     1.78     1.96     2.16     2.37     9.90
AR Invoice     1.0     1.0     6.12     1.50     1.64     1.81     1.99     2.19     9.13
Incoming Payment     1.0     1.0     1.44     0.35     0.39     0.42     0.47     0.51     2.14
Production
Production Order     1.0     1.0     1.38     0.34     0.37     0.41     0.45     0.49     2.05
Service management
Service Call     1.0     1.0     1.10     0.27     0.29     0.32     0.36     0.39     1.64
Service Contract     1.0     1.0     1.02     0.25     0.27     0.30     0.33     0.36     1.52
Customer Equipment Card     1.0     1.0     1.00     0.24     0.27     0.30     0.32     0.36     1.49
Financial accounting
Journal Entry     1.0     1.0     0.84     0.20     0.22     0.25     0.27     0.30     1.25
Thanks
Kevin
Edited by: Kevin Shah on Nov 19, 2009 11:59 AM

Similar Messages

Maximum number of items in an iTunes U feed?

What is the maximum number of items I can have in an iTunes U feed?
I'm sure I was told on the iTunes U course that the maximum number of items was 300 but in order to get items featured on the homepage I should try to limit it to 50.
Can anyone confirm this?
I've split our public lecture podcasts into separate feeds for each year but we're nearing 300 per year and will soon exceed that number. The only option would be to split it again by term but we can't do that without significant development work on our media CMS.

Please ignore these questions - these issues are covered in the public site manager video. http://deimos3.apple.com/WebObjects/Core.woa/Browse/new.duke.edu.1302914143.0352 7899686.4285944238?i=2057081390
They make it quite clear that iTunes U feeds should have a maximum of 300 items. I'm still not sure what would happen if you had a feed with more than 300 items, not that it really matters though. We've made changes to our media CMS so we can now create individual feeds for each our courses split by date e.g. 2010 Spring Term, 2010 Summer Term etc. This allows us to keep the number of items in our feeds well below 300.
They also say that you should avoid having items in more than one feed as this will have a impact on your iTunes U download stats i.e. the iTunes U download count for items listed in one more than one feed will be diluted. Because of this we've dropped the idea of a 'latest 50' feed for iTunes U and wherever possible we will avoid listing items in more than one feed.
I'm still not sure why an item in a feed with less than 50 items is more likely to get featured on the iTunes U homepage. Would be great if someone could confirm if this is true and if so why that is the case.

Add barcode in the item master data

Hi All
we have a field in the item master data called Bar Code. if you have several hundred thousand items in the database how do you assign a barcode for each item? do you enter the barcode manually for each item or is there any other way to enter this item's barcode automatically when the item is added into ware house? if you have enter manually the barcode how we should follow with the number of characters in the field? is that should look like exactly on the barcode label when you print? or we need to follow our own naming convention in using the numbers?
thanks
Santhosh

Check this Thread
[Barcode scanner addon;

Filter in list Item master Data

Hi all!
i don't know why my database can't filter in Item master Data. This icon is grey. Can you help me!

Hi Tien,
In which mode are you trying to filter data.....in the find mode the icon for filter will always be greyed out. in the item master data press * in the Item number the system will give yoyu a list if items which can then be filtered...the icon gets activated.
Nagesh

Translation of UoM in Item Master Data

Hi all,
Problem:
Our customer uses multi-language support. In the item master data they use the purchasing and sales UoM which is printed on the marketing documents. For example "ST" in German corresponds to "pc" in French (piece). They need to go into each item one by one and enter the translation even if the UoM is always the same.
Possible solution:
A table behind the UoM field so that you can select from a drop down list. You would then need to translate each entry in the table just once.
Best regards,
Gunther

The company is called BoyumIT and the add-on is called B1 Usability Package and their website is www.b1up.net
You may write to Soren the channel manager at this company. His email is [email protected] and refer my name if required.
There is a point system in SDN Forum which I am not sure if you are aware of this, but please take a look at how it works
How do I reward points?
I posted a thread and marked it as a question. Several people replied and gave me useful advice. I'd like to reward points. What do I do?
If you designated your thread as a question and are satisfied with one or more of the responses received, you may award points according to the following scheme:
Designation ................. Point Value
Solved My Problem..........10
Very Helpful ...................... 6
Helpful .............................2
To award points, go to your user profile and select the relevant thread from the list of Recent Messages. Click on the hyperlinked title. You will be directed to a page that shows all the responses to your original post.
Click on the star icon next to the response for which you wish to reward points. A popup window will appear. Use the radio buttons to mark a response "Solved My Problem," "Very Helpful," or "Helpful."
You are allowed to grant only one 10 point "Solved My Problem" award and one six point "Very Helpful" award, so evaluate all the replies carefully. You may designate an unlimited number of two point "Helpful" awards.
Suda

Factors in Item Master Data

Hi all,
Can any one Please let me know,what is the Usage of Factor-1,2,3,4 Fields in Item Master Data (Purchasing and Sales Tabs).
I just want to know in which scenarios we can use them?
If anyone could explain the same with practical example,it would be helpful.
Thanks & Regards,
Ravi Patil

Dear ,
Factor 1, Factor 2, Factor 3 and Factor 4 Fields for Purchase and Sales
The quantities of certain items must be calculated by multiplying
several factors. In the factor fields, you enter the multiplication
variables. For example, a 1.20 m high fence, which is sold in meters, is
in stock. The price for the sold quantity is, however, based on square
meters. To calculate the quantity (that is, the surface area) on which
the price is based, the system must multiply the sold length by the
height of the fence.
In this case, the length of the fence is determined with factor 1 and
the height (in the example here: 1.20 m) with factor 2.
The system automatically sets all the factors to 1. You can enter any
number of factors, or none at all. The entries you make here are copied
to the business transaction documents in Purchasing and Sales. You can
overwrite the factors in the row information.
Note: If you use the factors for a large number of your items, you can
use the settings for the transactions in Purchasing or Sales to display
the fields directly when you enter the document. In this case, you do
not need to call up the row information to change the factors.
You could also find some information from online help.
Regards
Apple

Encoding Item master data

Hi all!
I hear some expert said that the code of Item that encode in number( 1,2,3...) will make Database run faser than Items encoded in character(A,B, C...).
Could you give me some advice.!
Thanks!

Hi,
Database Performance is slow occour only on Increasing the Size of DB and More Item Code in
Item Master Data and More BP in BP Master Data.To avoid this you can
decrease the size of the DB so you Shrink the databse it decreases the DB size then
you check the database run faster ot Not.
DB Size More than 6 GB it occurs Performance Slow.
Regards
Jambulingam.P
Edited by: Jambulingam P on Aug 3, 2009 6:13 AM
Edited by: Jambulingam P on Aug 3, 2009 6:20 AM

Item Master Data Form Question

screenshot
http://mx1.beautybase.com/share/master.jpg
I have a user defined table (i.e. Colours) connected to the Item Master Data Form (-150). This table is combo box on the form. Whenever I populate this combo I specify Code (i.e. 1) and Name (i.e. Red) values. Now if my form in the search mode and I bring list of the items by using * for item number (Form 1003) I can see matrix with number of records but unfortunately column with colours displays Code instead of Names. Please let me know whether it is possible to display Name value.
thanks

thanks a lot
i think i have the latest vesrsion of SBO incl SP 14
SBO 2004A (6.70.187) SP:00 PL14
but had no luck even if setting description check box
(see screenshot)
http://mx1.beautybase.com/share/master_2.jpg
what shell I do, any ideas?

Error Message while adding Item in Item Master Data- [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting the nvarchar value 's008 01' to data type int. (CINF)

Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20),                      -- SBO Object Type
@transaction_type nchar(1),               -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                       -- Result (0 for no error)
declare @error_message nvarchar (200)           -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
--    IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
end

Hi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps

Error while importing Item MAster Data using DTW

Hi,
when we are importing item master data using items template
it is giving error.
Error:":connected value 1 was not found "
can any one send the oitems template that is working fine wthout any error.
Thanks,
Neetu

You cannot import data prepration templates>>Testcase1_Test Data for Import function>Oitems directly.
You will have to do certain prerequisites like setting CommissionGroup, CommissionPercent, CommissionSum,CustomsGroupCode etc., in SAP before importing Items.
So I would like you to try out with minimum fields in the template and import. After understanding, you can import the required fields.
I suggest you to use the template from "C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\oItems"

Error while importing Item Master data through DTW

Hello Expert,
I trying to import item master data through DTW but it gives an error while importing as shown in attach file..
Please help me...
I am using SAP 9.0 Pl 6
Regards,
Sandy

Hi Sandy,
Kindly follow the check list
1. Right Click DTW and run it as Administrator.
2. Is your DTW version is same as SAP B1.
3. Uninstall and re-install DTW.
4. If you are using 64-bit DTW, try to use 32-bit one.
5. Check the Template, is it of the same DTW version.
6. Remove all the unnecessary columns.
7. Last try different Template extension.. (e.g: CSV (Comma delimited), or Text (Tab delimited))
Hope you find this helpful......
Regards,
Syed Adnan

Unit Price in Item Master Data

Step no.1) At time of Defining Item Master Data we are Defining Unit Price say 2,000 INR. Data Saved in Price List 01.
Now with this information I am Preparing Purchase Order.After Selecting Specific Item unit price is reflecting in P.O by default, Then I modified Unit price from 2000 INR to 2500 INR in P.O.
Step no 2) I received material by Goods Receipt PO
Step no 3) When I am posting A/P Invoice based on GoodsReceipt PO in invoice the original Master Data Unit price is Reflecting.
Now vice versa I made another Transaction also in Another System.
In Step no 3 it is reflecting the Unit Price of Purchase Order.
Can I know why it gives different Information for same type of Transaction. Does I followed wrong System.
Regards
Narender

Please confirm the following.
Once you select a Price in PO it should carry all the way through at the AP Invoice and should not change unless changed manually.
Are you copying the PO > Goods Receipt PO > AP Invoice
And when copying to Goods Receipt PO or Invoice you are not changing the price or Pricelist
Pls let me know
Suda

How to include the UDF of items master data into PLD (Inventory in Warehouse Report (Detailed))

Hi,
Is there a way to include the UDF in the items master data into the <<Inventory In Warehouse Report (Detailed)>> PLD?
I checked the default layout and found out all the column source type is "free text" and the content is #Item, how do I know the value of the UDF?
Thanks

Hi,
Some of the standard reports are hardcoded in sap. Not possible to add UDF field in PLD.
Also refer this thread Variables - Sap business one
Thanks & Regards,
Nagarajan

Set Length in Inches in item master data in purchasing tab

Dear Experts,
I want to set the length,width and height in Inches in the item master data of purchasing data tab. By default it is coming in meter. Please help me
Regards,
Ravindra

Hi Ravindra......
Go to Administration --> System Initialization --> General Settings --> Display Tab --> Default Length UoM --> set in Inch.
Hope this will solve your problem.......
Regards,
Rahul

Item master data: can't modify

Hello Experts,
In Item master data >> Purchasing Data Tab >> Items Per Purchase Unit: when I try to change the value of this said field, it gives an error:
Cannot change the field becuase item is already involved in transactions Message [150-16]
Though I closed all the PO, Goods Receipt-PO, and Invoice but still the error is same.
Help Required
Regards,
Edited by: Shazad Nazir on Jan 6, 2009 11:40 AM

Hi,
You can check Note No. [1059753|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1059753] regarding your case.
Regards,
Jitin
SAP Business One Forum Team

Maximum number of Item Master Data

Similar Messages

Maybe you are looking for