Maximum Number of Objects in Local History does not work

In our Production system, I have configured the Maximum Number of Objects in Local History to be '10'.  I do not see any queries in the dropdown.  I have executed and changed queries since I made this change.  None of the users can see a history log.
In our Dev system, the Maximum Number of Objects in Local History is working as expected.
Is there a system-wide setting that overrides my personal setting?
Thanks.

you could have a consolidated DSO with the keys alone  and see if you can have an alternate design using an infoset instead....

Similar Messages

  • I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with

    I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with my apple ID.   Please Help me I speak Spanish so  if my English is not ok  I´m sorry about it.
    Do you think that apple has to   reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s?? 

    I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more.  I am not always somewhere I can charge my phone.
    Your points are true; however it doesn't help me......

  • Number 2 key on numeric keypad does not work. All other keys work properly.

    The number 2 on the numeric keypad does not work.  Is there some way to clean it?  If not how do I go about ordering another keyboard?

    inside the remote there is a micro switch for each direction each can break
    so yeah you could be the first who write about the right arrow key microswitch being broke in your atv

  • Number range object for characterstic DATE does not exist

    When I am trying to load data from ODS to cube getting below error message.
    "Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
    In update rules we are trying to convert this date Infoobject(Char) into Key figure.
    If anyone had exp with similar issue please reply.
    Thanks in advance
    Vani

    Hi Vani,
    Is ZEXTDATE Characteristic have any data in it? Can you check once.
    Veerendra.

  • America's top number one wireless service...does not work in Puerto Rico

    Please come back to Puerto Rico. I have been a member for over ten years. I live in Ohio  and will have to relocate to Puerto Rico.  My daughter is enrolled in college to become a school teacher in Puerto Rico. My family plan is not working well in Puerto Rico. I am paying for a family plan, (here in Ohio) and my daughter has two phones in Puerto Rico. They are not working. I had called Verizon Support, and was told that the phones must be mailed back to (Ohio)  me here in the states to be reactivated. Verizon phones cannot be activated in Puerto Rico. I prefer only Verizon, which is why I have not switched to any other provider. But, because Verizon does not have towers or businesses in Puerto Rico, even though we have 4G phones, we now have no service in Puerto Rico.   I am stuck with the choices of AT&T, T-Mobile, or Straight Talk from Wal-Mart, or the WORSE are the wireless and Internet services of Puerto Rico, Claro.. Claro has outages for DAYS and still expect full payment, regardless of how many days lost for service. Claro does not credit your account even if you had an outage for a week; you are still billed for the full month.  It is difficult to avoid this company in Puerto Rico. This is a message to CEO of Verizon...please bring your business back to Puerto Rico. When people asked my daughter what service she uses, they were excited when she said that she uses Verizon. But were disappointed when she said that her account is back in (Ohio) the states, there are no stores here. I have to send (AGAIN) two new phones activated here in the states back to Puerto Rico, so that my daughter can still use our Verizon Family Plan. There is nothing Verizon Support can do.  Once I move to Puerto Rico, there will be no one to send our phones to in (Ohio) the states to reactivate for our Verizon Family Plan. The phone service works for about three or four months, (in Ohio) than there is no service at all. Please bring America's top number wireless service back to Puerto Rico. Or Make some kind of deal with the wireless tower owners in Puerto Rico, so people that even visit Puerto Rico can use your phone service. Thank you for reading my request

    Our home line has had no dial tone for two days now.  When a repair was requested, we received a commitment of 8/8.  That timing was not sufficient.  I updated the repair request on line indicating that we needed the repair by today.  I called this morning and a recording told me that Verizon was committed to repair the phone by 8pm tonight.  Well, 9:30pm and no Verizon.  I tried calling with my cell phone and sat on the phone for over 30 minutes.  Either no one was home or it was past business hours.  In any event, here we sit with no home phone service.  We are elderly.  My husband has a heart condition.  I am grateful for our cell phones, not Verizon.  What if we had a real emergency and didn't have cell phones?  This is not customer service.  We never even received a phone call or an email as we requested on the repair status.  So sit another day or maybe more.  Frustrated in NJ.  P.S. Our experience with My Verizon is it sends you round and round and round with no real solution to your problem.  Any suggestions? Thanks.

  • Maximum number of monitors used for remote desktop not working correctly

    My goal is to connect from my home to my work machine but limit the number of monitors used to 2.
    At work, I have a machine running Windows 7 Enterprise SP1 with dual monitors. My home machine is Windows 8.1 Pro and it has 3 monitors (on two video cards).
    I followed the instructions of the MSDN blog post about using multiple monitors for remote desktop but cannot get it to work right.
    Here's what I see when I modify the group policy setting "Limit maximum number of monitors" on the target (work) machine:
    Setting - Result:
    1 - 1
    2 - 1 (???)
    3 - 3
    It looks like I can't limit the number of monitors used to 2, I get either one or all. Am I missing something or is this by design?
    Max

    Hi Max,
    Support for multiple monitors is available when connecting from any Windows 7/8.1 computer, however, there are restrictions when connecting to a computer using multi-monitor mode. When connecting to Windows 7 computers, only computers that are running Windows
    7 Enterprise or Ultimate can be connected to in multi-monitor mode. When connecting to Windows 8.1, only computers that are running Windows 8.1 Professional or Enterprise can be connected to in multi-monitor mode.
    Karen Hu
    TechNet Community Support

  • Hi, I am trying to verify my Acrobat XI Pro and the serial number I was given through email does not work.

    The Acrobat manager does not accept letter formation while entering the serial number. Where my serial number does contain letters and numbers. How do I enter my verified code ?

    Was this a purchase from Adobe?

  • Printersharing over my local network does not work anymore

    I cannot figure it out.
    'all of a sudden' (so it seems) my 2 printers in my network do not print printjobs from other macs in my network. It dit work. Nothing really changed, exept some system-updates.
    print-share is on, awake out of sleep is on (network-tab). Really there is no reason that it would not work.
    Still, ... it doesn't.
    config:
    - imac 27" 2011, software updated
    - macmini 2010, software updated
    canon ip4200, works standard on imac.
    brother HL-2030, works standard on imac
    The charm of the set-up was that I could have my printers in the office and still print from the livingroom (mac mini)
    To try to solve the problem I moved the mac mini temporarily to the office, so I have it next to the imac.
    Opening the section 'printers and scanners' and then pressing the '+' does however give me 2 differentviews:
    - on the imac I get a sub menu, dropping down from the '+'
    - on the mac mini I get a new window named 'add new printer' (this is hopefully the right translation - I am on a Dutch system)
    This strikes me as odd. I never noticed this before. Maybe this is where the problem lies?
    Anyone, Please???
    thanks,
    Jo

    I did that. I think I did all I could think of: restart macs, adsl-router, the only place I did not look was my switch.
    I use this thing because the build-in router in de ADSL-'modem' is 'only' 10/100 Mb. I want full use of my LAN, so I bought a switch. (I have a NAS for photo's, video and itunes. It is still awaiting to be used fully, but that is another matter).
    I just solved the problem partly. ...
    I just found out that the mac-mini was attached to the router, and the imac to the switch. I just connected both to the switch which solved the problem. Also connecting them to the router solved the problem.
    So, ... my next question would be: is bonjour using a special port on my router that I should open, or is there some other reason possible? (... it has a build-in firewall ...)
    It appears to be that the problem lies in the communication between the router and the switch.
    ... Just checked that, ... and it seems to work.
    So next analysis would be ... bad connection? loose cable/connector/etc?

  • History does not work correctly in Firefox when setting base tag?

    It looks like there's a bug in history.js that makes Firefox work incorrectly with History when the <base> tag is set in the HTML that runs the Flex object.
    We are not using the Flex-generated HTML, because of the way our application is built and one of the things that is different in the HTML that we run the Flex object in is the presence of the <base> tag.
    The <base> tag is set in our case to http://www.ufxbank.com/fr, and the full URL of the page with Flex is http://www.ufxbank.com/fr/trading.aspx.
    What happens is that the function setDefaultURL in history.js in its "if (browser.firefox || browser.opera)" part makes a call to "window.location.replace" with the value of "#", which in our case replaces the location to "http://www.ufxbank.com/fr/#", which brings a different page in the browser.
    I had to replace the code in history.js to be "var newloc = window.location + "?#" + def;" instead of the original "var newloc = "#" + def;".
    Does anyone has a better solution?
    Is it a bug in the template that should be fixed?

    Welcome to the forum.
    When you say delete the index, I think you mean delete the
    TOC?
    This is a known problem with Firefox. You have books with
    links to topics. If you remove those and have the required topic
    immediately below the book, the problem will go away.
    See other posts and my site.
    Please post a bug report as Adobe need to fix this.
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • "Reset sync history" does not work

    I am trying to fix an issue where my iPhone no longer syncs to my outlook 2007. Many posts suggest resetting sync history in iTunes, but when I click on "reset sync history", absolutely nothing happens. Something is broken. All suggestions welcome.

    Does the password work at https://account.services.mozilla.com/ ?

  • NumberFormat.getCurrencyInstance(Locale l) does not work

    Hi everybody!
    I got stuck on very simple thing. I'm working on jdk 1.3. For some reason I can't use 1.4 currently. Anyway it should not matter.
    I have small class for converting numeric (just integral very simple strings from flat database):
    import java.text.*;
    import java.util.*;
    public class Price extends AbstractDataObject{
    private Locale locale;
    private String value;
    //private NumberFormat format;
      public Price(String value) {
          this(value, Locale.US);
      public Price(String value, Locale locale) {
           this.value = value;
           this.locale = locale;
    public Object getData() {
              return new BigDecimal(value).setScale(2, BigDecimal.ROUND_HALF_UP);
         public String toString() {
              String result = "";
              NumberFormat format = NumberFormat.getCurrencyInstance(locale);
              double val = ((BigDecimal)getData()).doubleValue();
               result = format.format(val);
                 return new String(result);//(format.format(val));
             public  String getLocale(){//for debugging
              return locale.toString();
    }In other class I call:
    AbstractDataObject d8 = AbstractDataObject.getInstance("Price", "126767", Locale.GERMANY);
    System.out.println("Price " + d8.toString());
         System.out.println("Locale" + " " + ((Price)d8).getLocale());And get:
    Price $126,767.00
    Locale en_US
    What gives?

    Hi, thanks, I screwd in method chaining. Somewhere here:
             return getInstance(fieldName, value, Locale.US);
       public static final AbstractDataObject getInstance
                                 (String fieldName, String value, Locale locale) {//, Locale locale) {
            return getInstance(fieldName, value, locale, DISPLAY_DEFAULT);
      public static AbstractDataObject getInstance
                                   (String fieldName, String value, Locale locale, int cur) {...I fixed it already. Actually I refactored everything.
    Thanks again.

  • How do I get a new serial number- the one I was sent does not work?

    Please help.
    I was sent my serial number but It says it is invalid all I need is a new one.
    Is there a contact number for Adobe?

    Details.  OS, Product?

  • Download History does not work properly

    I would like very much to download again the files I have downloaded, but it seems quite frustrating when trying to do that. When accessing ovi music throught Nokia Music Player then accessing Download History I can only download albuns that do not need to be full downloaded, that is, some of them needs to be fully downloaded and other not, besides that problem when I click download to get an album I have to refresh the page as it wont allow me to download again, it seems to have many bugs, bugs that did not exist when downloading the album not from the history.
    Attachments:
    nokia.png ‏144 KB

    Hi xcap2000
    Sorry to hear about your mishap. Could you try one of the following:  log on music store  or nokia suite and see if you access your account and all your previously downloaded items which can be 
    under 'my stuff'.
    If  you are able to use any of the steps above then you may need to reset your phone  or take it to a Nokia care point for further assistance.
     I hope this answers your query.
    Regards 
    Carl
    If this post answers your question, you can help others by clicking the green accepted solution' button.
    Please ask your questions to the main board and not to my mailbox. Thank you.

  • Line number error in Exception stack trace does not work in J2SDK 1.4

    why the line number when your progam fails (in Java 1.3)
    don�t shows the line number but in Java 1.4.2:
    in a run fail prints something like:
    at SomeClass.someMethod()<unknow source>
    why: <unknow source>
    should I modify the (java or javaw) command arguments to specify that prints the line numbers when has throwns any exception and print the StackTrace ??

    Hi,
    I have another but related question:
    I am using a testing tool, called as Fitnesse. When an exception is thrown, it shows the exception trace but the line numbers are not shown, because the source code is unknown to the tool. It is an open source tool, so I want to change the settings such that it shows the line numbers.
    I know, maybe I should ask the question to the tool-forum. But I think, this problem is a general one, not related to a specific tool. How can "java" know the line number of the source code, where an exception is thrown?
    Thanks and best regards
    Mert Nuhoglu

  • In FF28 the "Options - Privacy - History - Clear your recent history " does not work.

    Never works to clear history. I can remove individual cookies.
    Here's my settings:
    Options
    - General - Show my windows and tabs from last time.
    - Tabs - top 4 checked.
    - Content - Block pop-up windows checked
    - Privacy - Tracking - first box selected; History - FF will remember history.
    - Security - Top three checked.
    - Advanced - Network - Cached web content - Override cache management checked. Limit to 350mb.

    See also:
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    If you use "Clear history when Firefox closes":
    *do not clear the Cache (Firefox will disable the disk cache in this case, see about:cache)
    *do not clear the Browsing History (clearing history will prevent reopening tabs automatically via session restore)
    *Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/remove-browsing-search-and-download-history
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
    Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep.

Maybe you are looking for