Maximum number of processor sockets in Windows Server 2012 Datacenter and Standard
I have found no documentation on the technical number of supported processor sockets supported by Windows Server 2012 for the Standard and Datacenter editions.
Some donation websites like Techsoup claim that Datacenter supports 64 physical processors and Standard 8, but I can find no authoritative confirmation of this and those look like extrapolation from Windows Server 2008 R2.
So what are the maximum supported # of processor sockets, assuming you have licenses for all of them, for Datacenter and Standard? Do they differ by edition?
In addition, is it true that the total # of supported logical processors in a single system is 640 w/o Hyper-V? It was originally reported to be that, but since Hyper-V's number doubled from 160 in the Beta to 320 in the RC and RTM, did this double too?
You might find some of the information you are looking for here -
http://download.microsoft.com/download/2/C/A/2CA38362-37ED-4112-86A8-FDF14D5D4C9B/WS%202012%20Feature%20Comparison_Hyper-V.pdf. I know there is one change that is not reflected there. Recently the maximum number of virtual machines supported
in a cluster was raised to 8,000 instead of the 4,000 reflected in this document.
The maximum number of sockets for Standard would be two because that is the maximum number that the license supports. Standard has never supported 8. Prior to 2012, it supported 4, and then the licensing changed with 2012 so that Standard would
be sold per processor (socket) with a maximum of two. Technically, the binaries are the same for Standard and Datacenter, so you can most likely get it to run with more somehow, but it is not a supported configuration.
The maximum number of sockets for Datacenter would be 64 - that has not changed from 2008. I make this statement based on the fact that Datacenter supports a maximum of 64 virtual CPUs when run as a virtual machine. Virtual machines don't have
the distinction of socket versus hyper-thread versus core. They see what is presented to them as a processor. But, I doubt very much that you will find any off-the-shelf 64 socket systems; most vendors are relying on the core densities instead
of socket density in order to deliver the horsepower. The above referenced document still shows 320 as the maximum number of logical processors, with or without Hyper-V.
tim
Similar Messages
-
Windows Server 2012 Essentials and Microsoft SQL Server 2014 Standard Core Edition
Our company is planning to buy Windows Server 2012 R2 Essentials edition (Volume license) and install it on Citrix Xenserver based virtual machine with 4 virtual processor cores. Can we install Microsoft SQL Server 2014 Standard Core Edition (2 licenses
for 2 cores) and run it on this virtual machine?you can install SQL Server Standard 2014/2012 on the Essentials Windows Server but without Server core Installation while installing SQL Server 2014 is supported on the Server Core mode of the following editions of Windows Server:
Windows Server 2012 R2 Datacenter 64-bit
Windows Server 2012 R2 Standard 64-bit
Windows Server 2012 Datacenter 64-bit
Windows Server 2012 Standard 64-bit
Windows Server 2008 R2 SP1 Datacenter 64-bit
Windows Server 2008 R2 SP1 Enterprise 64-bit
Windows Server 2008 R2 SP1 Standard 64-bit
Windows Server 2008 R2 SP1 Web 64-bit
http://msdn.microsoft.com/en-us/library/ms143506.aspx
thanks
diramoh
-
I have windows server 2012 R2 and install active directory
My question is I install active directory in windows server 2012 R2 and create Group Policy. ( These set-up is only for test)
Have not registered domain only install active directory to test.
So the problem is when I created Group policy for my user and put software restriction policy but its affected to my administrator accounts too, No when I open VMware (install Virtual Machine windows XP) and start os then its shows you can not user this
software as you restricted from installing software (Something like that don't know exact Error). I could not start installed Virtual Machine.
Please give me a solution for this.
This is the setup for a test use only so their not big environment connect with my pc.
Thanks in advance.
Regards,
KrunalHi,
The following article is talking about creating and managing Group Policy on a Windows Server 2012:
http://www.thomas-krenn.com/en/wiki/Creating_and_managing_a_Group_Policy_on_a_Windows_2012_Server
As Darren Blanchard mentioned, if you want to apply the GPO, you could link it to an OU that contain the computer or user.
Group Policy Overview
http://technet.microsoft.com/en-us/library/hh831791.aspx
Please feel free to let us know if you need further assistance.
Regards.
Vivian Wang -
Hyper-v Role in Windows Server 2012 foundation and Essentials
Hello,
I have seen that the two low cost version of Windows Server 2012 essential and Foundation) will not support hyper-v. Can you please tell me what it means exactly :
Can you please tell me what is possible :
-The server can not be installed as a hyper-v guest (probably yes)
-The hyper-v role can not be installed on the server (so I have to rely on vmware)?
- Hyper-v role can be installed but there is no free license included with the server.
Thank you
MarcI suppose then, you would have to install Windows 8 and Hyper-V as your guest or core.
Then run your Server 2012 Foundation under Win8. which has 512GB Memory Limit.
It seems asinine that you cannot install this role on Foundation, but seemingly you could work around it with Win8. (Or Sun Virtual Box (free) (or VmWare(Free).
So load up a dozen Win8Pro virutal sessions on that Win8 VirtualBox with up to 512GB Memory and Create your own Ghetto Remote Desktop Server with Foundation and Windows 8. ;)
What good is it if your can't run Hyper-V and Remote desktop services? Those are the two apps small business need most. But Microsoft strips it out, calls it a DEAL (Essentials and Foundation) , yet if you want the good stuff, you're gonna
have to buy Server 2012 Standard anyhow, + the CALs.
So you are hooked into this "deal" by Microsoft Special Offer. Its special alright, because you get to buy it twice. The stripped down version that come with your server, then the full version when you discover Foundatoin and Essentials gives
you AD, and thats it. Nothing Else. No "deal"
Remember:
All you get with Foundation or Essentials is AD and Group Policy.
You cannot load RDP on Foundation or Essentials
You cannot load Exchange on a DC, or Foundation or Essentials
You cannot load Exchange and RDP on the same box.
You cannot have Remote Web Apps if you load RDP on your DC.
You cannot win with Microsoft. No worthwhile "deal" has ever come out of the city of Redmond.
The internet is a one-way money pipeline to Microsoft.
Its three times the work, three times the cost and requires three servers licenses to do with 2012, what you could do with one 2008R2 license.
Might as well purchase 2 Server 2013 Standard Editions if you want:
1.) Active Directory
2.) Remote Desktop and Remote Apps
3.) Your own Exchange Server
You are better off installing a NAS if all you need is a file server.
Why bother with Foundation or Essentials? Its a "Gimmick-ware" -
Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!Hi,
Agreed with DonPick.
Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
More information regarding Internet Explorer 11, please check:
Internet Explorer 11 - FAQ for IT Pros
http://msdn.microsoft.com/en-us/library/dn268945.aspx
Best regards
Michael Shao
TechNet Community Support -
The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllecehello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer -
Hello,
we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
Errors:
There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
>Get-DAConnectionStatus
Status : Error
Substatus : CouldNotContactDirectAccessServer
>Get-NetIPHttpsState
LastErrorCode : 0x0
InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
Setup:
Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
Diagnosis:
So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
access the NLS-Website located on the server, which worked fine).
Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
on the URL returning HTTP-200 and no content.
I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
Regards
MatthiasHi,
In addition, have you disabled the DA client components on the DA client? If no, please also check
the settings on the Name Resolution Policy Table.
More information:
DirectAccess
Client Location Awareness – NRPT Name Resolution
In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
registry or corrupt drivers. For more detailed information, please refer to the link below:
Error 1225 - Error Code 0x4C9
Note:
Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Susie -
DirectAccess Windows Server 2012 R2 and Windows 8.1 - status connecting
I've successfully deployed DirectAccess on Windows Server 2012 R2 in a 2 node NLB cluster. Everything in the console is green and I can see clients connecting.
Windows 7 clients can connect and with the DirectAccess connectivity assistant installed show as connected and I can access resources.
On a Windows 8.1 client I can access resource and run the troubleshooting tool which reports no errors, but if I look at connections it shows as connecting and the status never changes to connected. Clients work correctly when on the internal network.
I've looked at available hotfixes, but not found anything for when the status is incorrectly shown.
Any ideas before I raise a support call?
James SaundersHi,
You current information hardly determine which part may occur error, I found the similar symptom on the following third party article, may can give you some help.
The similar issue third party article:
Windows 8 DirectAccess client keeps saying "Connecting"
http://tfs.letsblog.it/post/2013/07/10/Windows-8-DirectAccess-client-keeps-saying-Connecting.aspx
More information:
The Network Connection Status Icon
http://blogs.technet.com/b/networking/archive/2012/12/20/the-network-connection-status-icon.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Task Sequence Windows Server 2012 format and partition issue when using MDT2012
Hi all,
Currently I'm working on a task sequence to deploy a Windows Server 2012 image. We've integrated MDT2012 Update 1 in SCCM2012 SP1 and created a default 'Server Task Sequence'. This task sequence deploys the install.wim to a server which has multiple disks
attached.
We've configured multiple format and partition disk steps to create the following partition layout:
Disk 0: 499MB BDEDrive (do not assign drive letter) + 40GB OSDisk
Disk 1: 40GB Programs
Disk 2: 40GB Data
Disk 3: 25GB User
When the task sequence is finished I've noticed the drive letters assigned to the disk are not correct. In some cases the BDEdrive gets drive letter D assigned, sometimes drive letters are assigned starting with E, thus skipping drive
letter D.
The smsts.log files show an error when it's re-assigning drive letters after booting into Windows. Looks like an error in the DiskPartScript.txt.
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="16:59:40.889-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="16:59:40.905-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="16:59:40.920-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="16:59:43.806-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1462">
<![LOG[Re-assign all drive letters...]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="diskutils.cpp:1941">
<![LOG[Executing command line: "C:\WINDOWS\system32\diskpart.exe" /s "C:\WINDOWS\TEMP\DiskPartScript.txt"]LOG]!><time="16:59:43.900-120" date="05-10-2013" component="OSDSetupHook" context=""
type="1" thread="776" file="commandline.cpp:827">
<![LOG[Process completed with exit code 2147942487]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="commandline.cpp:1123">
<![LOG[Diskpart.exe STDOUT:
Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: SRV03
Volume 1 is the selected volume.
DiskPart successfully removed the drive letter or mount point.
The volume you selected is not valid or does not exist.
There is no volume selected.
]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="3" thread="776" file="diskutils.cpp:1807">
When I take a look at the generated diskpart_script.log file the volume D gets selected twice, which fails the second time because of the first remove drive letter command.
This is the output in the diskpart_script.log file:
select volume D
remove letter=D
select volume D
remove letter=D
select volume E
remove letter=E
select volume F
remove letter=F
select volume H
remove letter=H
select disk 0
select partition 1
assign
select disk 1
select partition 1
assign
select disk 2
select partition 1
assign
select disk 3
select partition 1
assign
It seems this error is caused by the first 'Format and Partition Disk' step before the 'Use Toolkit Package' step which is part of the default Server Task sequence. When I disable this Format and Partition step and create the partition manually
all looks ok showing no errors in the smsts.log file.
I've solved this by replacing the first 'Format and Partition Disk' step by an Powershell command which formats and partitions the disk.
Anyone seen this behavior?I have a similar problem when I install windows on some clients. Have you found any explanation for the behavior?
-
Hi,
I downloaded
Windows Server 2012 Evaluation Version recently. Actually, I wanted to check whether i could run Windows Phone 8 emulator on Win server 2012 using my core2duo (Non-SLAT PC). Now i wanted to activate the evaluated version by using product key of my
MSDN's student account. But its giving error when i enter my product key. I checked this article about converting evaluation version to full retail version. The article
says :
"If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additional
domain controller on a server that runs a retail version and remove AD DS from the domain controller that runs on the evaluation version."
So kindly guide as to how I can install this additional domain controller and how to remove AD DS from domain controller. Currently, I have Dual Boot PC( win 8.1 and win server 2012).
Hoping to get a brief response....
Unless you have configured a whole lot of things into the DC running on the evaluation copy (should never install production on an evaluation copy), it would be simplest to start from scratch and reinstall.
Or, you simply go into Server Manager > Manage > Add Roles and Features to remove the AD role. Then you will be back to a workgroup server.
The evaluation version is good for 180 days plus three re-arms of 30 days each. So you can do a lot of experimenting with the evaluation copy without the need for using an MSDN key.
.:|:.:|:. tim -
FastTrack Reference architectures for Windows Server 2012 R2 and SQL Server 2012?
The latest Fast Track DW Refrence guide refers to Windows 2008 R2...is there a new guide that includes Windows Server 2012 R2?
Here is the link for the word doc that describes the architecture requirements
http://technet.microsoft.com/en-us/library/hh918452.aspxHi Chuck,
According to your description, in deed, there is only introduce that the default settings should be used for the Windows Server 2008 R2 Enterprise operating system in document. However, personally, there is also apply to the platform of windows server 2012
R2. I recommend you that submit the requirement at https://connect.microsoft.com/SQLServer/.
If the requirement mentioned by customers for many times, the product team may consider to add this feature in the future version. Your feedback is valuable for us to improve our products and increase the level of service provided.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hi I have a 4 node Windows server 2012 Hyper-V cluster. When I try to run a cluster validation report, everything else is fine but it fails at validate the Operating System Installation Option step. I did some research but couldn't really find any solution.
Anyone knows how to pass this test? Thanks.
Here's the error I get when run the test:
An error occurred while executing the test.
The operation has failed. An error occurred while getting the operating system installation option for node "server1"Hi JasonLiu2002,
Please post the original error information, the current information is so wide that difficult to determine where may have issue and please offer more information about your
server configuration, you can refer the following article to prepare your cluster environment first.
Windows Server 2012 Hyper-V Best Practices (In Easy Checklist Form)
http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
When you preparing the new cluster on Server 2012 please install the Recommended hotfixes and updates for Windows Server 2012-based failover clusters updates.
http://support.microsoft.com/kb/2784261
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Exchange 2013 Windows Server 2012 NLB and DAG on the same server
Hi all, I am installing Exchange 2013 infrastructure with two servers.
Both servers have the CAS and Mailbox roles.
For mounting on High Availability, will create a DAG.
Client Access I have no external Network Load Balancer.
I thought about installing the NLB servers in the DAG members, this could not be done before.
I do not know if in Windows Server 2012 and Exchange 2013
Can I install NLB on members of a DAG?
regards
Microsoft Certified IT Professional Server AdministratorHi,
I’m afraid that WNLB and DAG cannot coexist in the same server. Because WNLB is incompatible with Windows failover clustering. If we're using an Exchange 2010 DAG and we want to use WNLB, we need to have the Client Access server role and the Mailbox server
role running on separate servers.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/ff625247(v=exchg.141).aspx
Thanks,
Angela Shi
TechNet Community Support -
October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2
Hello all,
After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
The job was cancelled. The user either cancelled the job or modified the associated protection group.
Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
Thnks, AndreaHi Andrea,
Have you installed the update 2919355?
To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
According to the official website, the issue which you described is not listed as the known issue.
Please uninstall this update and continue to monitor the official website for the latest news.
Best Regards.
Steven Lee
TechNet Community Support -
Upgrade a Domain Controller running Windows Server 2012 Datacenter Eval
Hello,
because I couldn't wait for Server 2012 to show up on Dreamspark Premium I installed the Datacenter evaluation version after I found this blog
post telling me, I could simply enter my key when I get it to upgrade to the full version.
After entering the command I get notified that "Changing this Windows edition is not supported online for a domain controller.".
The TechNet article for upgrading evaluation versions states the following:
"If the server is a domain controller, see http://technet.microsoft.com/library/hh472160.aspx for important steps to follow before proceeding."
and taking me to an article for installing/uninstalling ADDS without further comments.
Simply typing "slui 3" and entering my key states that I have to enter an eval key.
My question is: Is there a painless way to upgrade my 2012 DC without losing my AD config?
Regards,
HansHi,
Please refer to the following Microsoft TechNet article to confirm if the steps of converting to full retail version are correct.
Evaluation Versions and Upgrade Options for Windows Server 2012
http://technet.microsoft.com/en-us/library/jj574204.aspx
If the warning persists, it means Windows Server 2012 Domain Controller does not support such convert. If so, please install another Windows Server 2012 full retail version or
convert to full retail version and then promote it to an additional Domain Controller for this domain. After that, transfer FSMOs to this new Domain Controller and demote the original Domain Controller.
Regards,
Arthur Li
TechNet Community Support
Maybe you are looking for
-
Can not print report directly to printer.
Hi, We are using Crystal Report Server for reporting in our project. The version we are using is Crystal Report Server XI R2 and Crystal Report Server XI R2 SP 2. Please kindly advice us on the following issues we faced: - Can not print report direct
-
Ipod not being reconized in ITunes ..Help
I have 2 iPod classics (120 and 160) that will not show up in iTunes, I have gone through all the steps that I have seen on Apples website and still nada. Any other ideas or suggestions? I'm beyond stumped at this point and becoming extremely discour
-
Hi All, i need to select the bkpf table with OR condition. example Select * from bkpf where and ledger group is either 0L or initial. kindly help me with the same. i have tried with creating a range table and populating the values 0L an
-
How to use JDK 1.5 in WSAD 5.1.2 to complie the code
Hi, We have currently deployed our code on JDK 1.4 in WSAD 5.1.2. How to run wsad 5.1.2 with jdk 1.5, this is just for compiling the code and not for deployment as we will be tieing up with RAD 7.0 on a future date after the migration of our Webspehe
-
This driver does not appear in the apple search list. Any ideas on where i can locate a driver.