Maximum number of retries in the Adapter Engine

Hi guys!
I have a question for you, I have many JDBC Receiver CC that for a bad data in their queries cannot be executed correctly in the target DB, and they remain in the Message Monitoring retring (e.g. one of them is in his retry #1700) and they always keep in TBDL status, not changing to System Error. I saw this in the Audit Log tab.
In the Message Data tab I See these parameters:
- Number of Retries 3
- Failed: 1700
- Retries 300000
I don't know why that "number of retries" parameters always stays on ' 3 ' value, so I'd like to know where is the real parameter that sets the ammount of times that the message will try to be sent (the correct way in these cases would be no more than 3 tries).
As an additional data I can tell you that in the definition of the CC I set the parameter in Advanced Mode -> Additional Parameters -> Nunber of retries of Database Transaction on SQL Error = 0.
Thanx in advance!

This retry information could be found at Visual Admin->server->services-> SAP XI Adapter: XI. You may also change it from here.
Regards,
Prateek

Similar Messages

  • Maximum number of retries in the TimeoutThrowHandler

    Hi,
    I am using the following code:
    http://cookbooks.adobe.com/post_Renewing_the_context_to_handle_session_expiry-16410.html
    I am getting a stack overflow error. and the request is tried multiple times on LC  and finally it thows a stack overflow.I wanted to set the retry limit to a finite number.
    Please let me know how to do that.
    Regards,
    Leena

    This retry information could be found at Visual Admin->server->services-> SAP XI Adapter: XI. You may also change it from here.
    Regards,
    Prateek

  • Number of retries of receiver adapter

    Hi there,
    for some testing purposes I need to limit the number of retries of an outgoing RFC adapter. If the RFC connection of this receiver communication channel fails, the message should get the status "system error" immediately and the adapter engine should not run any furhter retries of sending the message.
    Has anybody an idea how to limit the retry count for the RFC adapter?
    Help is higly appriciated, tahnks in advance.
    Cheers,
    Matthias

    Hi,
    Check these replies help.
    Retries
    Note 791379 - XI Adapter service properties documentation
    Note 791655 - Documentation of the XI Messaging System Service Properties
    blog:
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    Thanks,
    Vijaya.

  • Getting error in the adapter engine when sending a message

    Hi,
    I'm always getting this error in the adapter engine: Message processing failed. Cause: com.sap.aii.messaging.util.URI$MalformedURIException: no scheme
    The comm channel ends up in error because of messages having the above error.
    Could someone please help?
    Thanks.
    Mike

    Mike.
    Please check this links.
    Check your adapter and restarted.
    com.sap.aii.messaging.util.URI$MalformedURIException: invalid port number
    Re: Prerequisites to setup configure mail scenario.
    error in communication channel
    Error :Receiver File Channel not Initialized

  • How to remove large message stuck in the adapter engine?

    Hi experts,
    We have a large message abt 100 MB stuck in the adapter engine which is causing the J2EE server to restart continuously.
    I have tried increasing the heap sizes and the number of threads in config tool, but no luck. My question here is how to remove that message? Also I checked smq1 and smq2 both are empty.
    Regards.

    Hi Nagasatya,
    This issue is realted to Large amount of data.You have to write condition in the query.I have face same issue,but resolved it.Please do the following steps.
    Go to Configtool and selct the com.sap.aii.adapter.jdbc.svc and set this jdbc service to start manually instead of auto.
    Then restart server0, this time it should be started successfully. Then go to rwb and try to
    find if any jdbc hanging/failed messages are there, if so, cancel them;also deactivate the problematic jdbc communication channel, otherwise itwill poll the data again. After all above, you can manually try to start this jdbc.svc particually.
    Thanks
    Ravi

  • How to process stucked holding messages in the Adapter Engine.

    Hi experts,
    This question is may be familier to all...
    There are thousands of messages are in holding status in the Adapter engine in RWB.
    I tried to found system error in these messages. There is no system error from the last in my investigation. I tried to restart of the communication channels of the combination of these messages. But it is also not use to fix this problem.
    Instead of the restart of the Java engine please let me know is there any possibility to fix this issue.
    Regards
    Mahesh

    Hello Mahesh
    You can try restarting some of the XI services (e.g. com.sap.aii.af.svc) but usually a java restart is required to free up these blocked threads/queues.
    Most likely these messages are in Holding status because there is a blockage in one of the Adapter queues. This can be monitored in the RWB
    -> Component Monitoring                                                
    -> Adatper Engine XIP                                                  
    -> Engine Status                                                       
    -> Additional Data   
    Find out what adapter queues are causing the blockage and increase the number of threads/queues available to it. This will help prevent the issue occuring again.
    See note #791655 Documentation of the XI Messaging System Service Properties, for an explaination of the queues.
    See these blogs for more details:
    1) /people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
    2) /people/kenny.scott/blog/2008/12/05/xipi-file-and-jdbc-receiver-adapter-performance-and-availability-improvements
    Ensure note #937159 XI Adapter Engine is stuck, has been applied. 
    Regards
    Mark

  • I  am getting maximum number of retries using icloud account

    I  am getting maximum number of retries using icloud account

    What do you mean by "maximum number of retries"?
    If you are told that you can't create a new Apple ID/icloud account because the maximum has been reached, you have to use another device or computer to create the ID, since there is a max of (I think) 3 or 5 allowed on each device.  This means that your current device has already been used to create the maximum number.

  • XI Adapter ? No messages in the adapter engine in RWB

    Hi Guys,
    I have the scenario SOAP-PROXY. I have configured XI Adapter on the receiver side. I have used xml spy to post the messages directly to the IS. I could not see any messages in the adapter engine in RWB.
    I have seen the messages processed successfully in the integration engine under RWB.
    can anybody explain why i could not see any messages in the adapter engine ? Is It normal with the xi adapter on the receiver side ?
    Thanks,
    Raj
    Message was edited by:
            raj reddy

    Raghu.
    I've done the following:
    1. I've executed SE38 tx code.
    2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
    3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
    4. There are no available variants, so I clicked on the "Execute immed." button.
    5. The job starts. I can monitor it on the SM37 tx code.
    6. It only deleted 20 messages.
    What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
    what do you think of it??
    regards
    Carlos.

  • Delay of Message in the Adapter Engine when put into queue

    Hi XI/PI Experts,
    We are having problems in the Adapter Engine wherein messages are staying longer in the AE queue as usual.  Sometimes, it stays longer in Delivering status also.  Is there any way we can monitor and try to push the message out of AE to avoid delays?  I know we can do this in the ABAP side (Integration Engine)...but how can we do this in the Adapter Engine?
    See below sample logs in AE RWB:
    2008-07-17 13:28:13 Success Using connection SOAP*****. Trying to put the message into the receive queue.
    2008-07-17 13:28:13 Success Message successfully put into the queue.
    2008-07-17 13:34:12 Success The message was successfully retrieved from the receive queue.
    2008-07-17 13:34:12 Success The message status set to DLNG.
    As you can see there is a gap of 4 minutes.
    Hope you can help me.  Thank you so much in advance.
    Grace

    Hi.
    Thanks for your answers but the messages are not set into EOIO but just EO.  So the messages are not ending up in Holding Status. 
    I also believe that issue is not occurring because of too many messages in error in AE nor because of the receiving system is down.  Issue is happening when message is about to be sent to the SOAP communication channel in AE.  As you can see in the sample log I provided above, in RWB AE, after the message was put into queue, it took several minutes to be delivered to corresponding comm channel.  My questions are:
    1.  Is there a way we can monitor the queue in AE like the way we monitor the queue in IE? (e.g. smq1 and smq2 transactions) .
    2.  If there is a way, how are we going to intervene manually on the queues in AE?  (we can intervene with smq1 and smq2 in IE)
    3.  For messages with Delivering Status in AE, sometimes it is taking hours to move to "Successful/Delivered" Status.  Is there a way we can intervene with that?  I believe we can resend messages with "System Error" Status and Staus "To be Delivered" but for status "Delivering"...it is not possible (from what I know -- I hope there is a way).
    I look forward to hearing from you guys/gals.
    Grace

  • Messages are in hold in the Adapter Engine

    Hi all,
      I am seeing in my adapter engine that all of the messages are in status hold , it is for  a specific business system and interface.
    2009-02-10 21:41:30 Success Message successfully put into the queue.
    2009-02-10 21:41:31 Success The message was successfully retrieved from the receive queue.
    2009-02-10 21:41:31 Success The message status set to HOLD.
    can anyone please help?
    Thanks in advance
    Sugata B

    Hi
    i ve got the same problem .
    I m using the message monitor in order to find the first message in error in this queue and so to be able to free the queue.
    My problem is how to detect these holding messages.
    As the error is in the Adapter Engine , you cant see it in sxmb_moni transaction
    In the message monitoring, you can check it manually.
    I need to have an automatic report of 'holding messages".
    I try to connect the Adapter engine alert to the ccms. The problem is that autoreaction alert arent possible in this case.
    Any body found the means to check directly in the database with sql-based command the status of message ?
    thanks for your help
    florent

  • Alerts in the Adapter engine

    Hi all
    I´m working in a BPM scenario, I have raised an alert from the BPM and it arrives to my inbox(alert framework). And also i can see it in the CCMS. But now I trying to configure an alert to be raised in case of an error in the Adapter engine (file adapter). I´m on sp15 and i have create a alert categorie and an alert rule setting this with the value Adapter engine and the adapter type File.
    I have checked the alert with "RSALERTTEST" and it works fine it arrive to my alert inbox and to the ccms. But i have an error in the file adapter and is not arriving anything. The communication channel is a Sender. There is some thing missing in my configuration?
    Any help please?
    Regards
    Noelia

    Here are my hints:
    1) http://help.sap.com
    Alert Notification Step-by-Step
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Alert Configuration
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
    2) Michal's blog: XI FAQ
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    XI: Alerts - Troubleshooting guide
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    XI: Alerts - Step by step
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    3) Notes:
    750287 XI 3.0 Runtime Workbench: Alert configuration does not start
    768456 Troubleshooting Runtime Workbench XI 3.0
    813703 XI RWB alert configuration is incompletely displayed
    840849 XI 3.0 Runtime Workbench: SSO2 is not active in this system
    824039 XI30 Runtime Workbench: Display of XI alerts in CCMS
    0000906044 XI30 Alerting: Wrong hostanme in the URL of the XI Alert
    0000905896 XI30 Alerting: Message without recipient creates no alert
    0000904825 Synchronous message processing: Error in CCMS connection
    0000902022 XI30 Alertrule insensitive to Receiver Interface
    0000882215 XI 3.0 Runtime Wkbnch: Java Adaptr does not generate alerts
    0000876546 XI 3.0 Runtime Workbench: Missing alerts
    0000870232 XI 3.0 Runtime Workbench: New Alerting functionality
    But start with this one:
    913858 XI3.0 Alerting: Troubleshooting
    4) User roles
    SAP_ALM_CUSTOMIZER -- Alert Management: Role for Customizing
    SAP_ALM_ADMINISTRATOR -- Alert Management Administrator
    SAP_BC_ALM_ALERT_USER -- ALM: Role for the alert user
    SAP_BC_ALM_ADMIN
    SAP_BC_ALM_CUST
    SAP_XI_RWB_SERV_USER
    SAP_XI_RWB_SERV_USER_MAIN
    Regards,
    Sandro

  • Message Archiving for the Adapter Engine

    Hi,
    we have configured archiving for Integration Engine (SXMB_MONI) messages on the Production XI System. is it necessary to configure Message Archiving for the Adapter Engine also ? in which scenarios archived adapter messages are useful ? are there any other advantages/disadvantages for this(in case of errored messages on the adapter engine) ? Please share any ideas.
    Thanks
    Pavan.

    >>is it necessary to configure Message Archiving for the Adapter Engine also
    Not necessary,but depends upon the scenario,lets say you are posting messages to external partner's FTP and there was some issue in connectivity due to which file was not delivered,in this case you need to send the message again.
    same thing can happen in inbound messages too.
    >>in which scenarios archived adapter messages are useful ?
    i would do this specifically for JDBC sender coz once you pick up the files based upon SQL query,you change the flag so that those values are not picked next time,in this case you can't re-run the old query and get same results.
    this also holds for proxies and file too.
    Thanx
    Aamir

  • Changing Exactly-Once-in-Order Processing in the Adapter Engine

    During some issues with hanging messages in some communication channels I noticed that messages for other receivers were also on hold. So adapter engine was processing all messages EOIO while Integration Server does that per receiver.
    I found the [solution in the SAP Help |http://help.sap.com/saphelp_nw04/helpdata/en/45/13b942f14d29efe10000000a114a6b/content.htm] but I am not able to access the mentioned link: http://<host><port>/MessagingSystem/migration.jsp
    Error message I got is: 404 not found.
    Looks like something changed! I checked some simular links like http://<host>:50000/MessagingSystem/monitor/monitor.jsp and that works fine.
    (I also checked the role SAP_XI_ADMINISTRATOR_J2EE was included in my userprofile)
    Please help me finding what I do wrong...or what has changed.

    Hi Sunil,
    ok, but do you know how what happened with the
    http://<host>:50000/MessagingSystem/migration.jsp
    I need that link to change the EOIO processing in the adapter engine.
    Regards,
    Michel

  • No communication channels visible in the adapter engine

    Hi Experts,
    We are getting the issue in our PI system that No communication channels are visible in the adapter engine in our PI devolopment system.
    We had checked the following and all are working fine.
    1) SLDCHECK successfull
    2) SLDAPICUST successsfull
    3) Cache is successfull
    4) Tried to restart the J2EE application com.sap.aii.af.ms.app in NWA
    but still getting same issue
    5) All standard users like PI* users are not locked, all are fine
    6) INTEGRATION_DIRECTORY_HMI connection is also working fine.
    7) Tried with whole system including ABAP restart- getting the same
    issue that Commnunication channel entries are not visisble in CC monitoring tab in AE.
    Can you please guide us to fix this issue as it is impacting our interfaces testings.
    Thanks in advacne
    Srikanth

    Hi,
    >>>>>>> No communication channels are visible in the adapter engine.
    You have to do full cache refresh, by using the below URL:
    http://<host name>:<port>/CPACache/refresh?mode=full
    I hope that, you will out of the issue.
    Regards,
    Rajesh

  • Error while reading access data (URL, user,password) for the Adapter Engine

    Hi,
    Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.pi1.piserver1</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks
    Balaji

    It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
    Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
    Enter the appropriate values for:
    SLD.selfregistration.hostname (Use fully qualified hostname)
    SLD.selfregistration.httpPort
    SLD.selfregistration.httpsPort
    Sandro

Maybe you are looking for

  • CD drive on my Satellite 1900 laptop doesn`t functioning

    i have got a satellite 1900 laptop. Now my CD Drive is not working as it does not detect the CD in the drive.I tried uninstalling the hardware and reinstalling it with no help.Any ideas/suggestions please? Message was edited by: rrvnd i had a similar

  • Strange icon appeared on iPhone4 bar

    strange icon appeared on muy Iphone 4 bar, near the battery icon. it looks like a old telephone hand with buttons underneath. i wonder what it means and how it came there. My iphone is not functioning properly and i cannot download the software updat

  • Contact picture gets automatically rotated

    When I'm trying to set a new picture for a Contact, it gets rotated automatically. After selecting the picture and selects use as contact picture it gets rotated automatically in the cropping window. I even tried to set picture from the contact. Stil

  • P780 signal issue after upgrading build number

    Recently i had upgraded build number P780_ROW_8G_S227_141121 after upgradation both sim card showing no sim signal on handset  how to solve this problem please suggest .even factory restore password not accepting . Regards Wasi

  • Get storage location for material

    Hello Abapers, I have a specific requirement, I need to find out the current stock of a material provided and detaisl i need are quantity, wareshouse number, plant, storage type, storage type name, i m getting most of data from MARD, wat I am lacking