Maximum number of retries in the TimeoutThrowHandler

Hi,
I am using the following code:
http://cookbooks.adobe.com/post_Renewing_the_context_to_handle_session_expiry-16410.html
I am getting a stack overflow error. and the request is tried multiple times on LC and finally it thows a stack overflow.I wanted to set the retry limit to a finite number.
Please let me know how to do that.
Regards,
Leena

This retry information could be found at Visual Admin->server->services-> SAP XI Adapter: XI. You may also change it from here.
Regards,
Prateek

Similar Messages

Maximum number of retries in the Adapter Engine

Hi guys!
I have a question for you, I have many JDBC Receiver CC that for a bad data in their queries cannot be executed correctly in the target DB, and they remain in the Message Monitoring retring (e.g. one of them is in his retry #1700) and they always keep in TBDL status, not changing to System Error. I saw this in the Audit Log tab.
In the Message Data tab I See these parameters:
- Number of Retries 3
- Failed: 1700
- Retries 300000
I don't know why that "number of retries" parameters always stays on ' 3 ' value, so I'd like to know where is the real parameter that sets the ammount of times that the message will try to be sent (the correct way in these cases would be no more than 3 tries).
As an additional data I can tell you that in the definition of the CC I set the parameter in Advanced Mode -> Additional Parameters -> Nunber of retries of Database Transaction on SQL Error = 0.
Thanx in advance!

This retry information could be found at Visual Admin->server->services-> SAP XI Adapter: XI. You may also change it from here.
Regards,
Prateek

I am getting maximum number of retries using icloud account

I am getting maximum number of retries using icloud account

What do you mean by "maximum number of retries"?
If you are told that you can't create a new Apple ID/icloud account because the maximum has been reached, you have to use another device or computer to create the ID, since there is a max of (I think) 3 or 5 allowed on each device. This means that your current device has already been used to create the maximum number.

This Apple ID has already restored to the maximum number of devices in the last 90 days

Has anyone seen this error message "This Apple ID has already restored to the maximum number of devices in the last 90 days"? We get this when we use iCloud to restore a master backup to iPads in a school computer lab. The first 9 or so restores go without a problem and then we start getting the error. The iPads are running iOS 5.01.
We previously used iTunes to do the restore and did not have a problem, but it takes a long time to deploy to the 25 iPads. We were hoping that using iCloud would be faster.

9. You’re limited to a maximum of 10 devices. With the ability to re-download content from everywhere, Apple has limited the number of devices that can participate in iTunes in the Cloud for a given account. The new terms allow for a total of 10 devices, five of which can be computers running iTunes. This means you could have five iOS devices and five computers authorized, or one computer and nine iOS devices, or any combination of the two.
Fortunately, this limitation only applies to iTunes in the Cloud features—you can still sync content directly from an authorized iTunes library to an unlimited number of iPods or iOS devices; the limitation only applies to authorizing devices to re-download or automatically download content directly from the iTunes Store.

Maximum Number of retries

Hi all,
Which field in ICM database depicts the maximum number of attempts (for a certain record) dialer contacts a certain customer if it gets a busy tone, no answer, etc..
Regards,

On the Admin Workstation
Config Manager => Outbound Option => Campaign
Within the Campaign General tab..
In the Dial Setting section there is an option titled "Maximum attempts (1 - 100)"
This setting is defined as follows - Defines the maximum number of attempts that will be made for no answer and busy signal callbacks.
Enter the maximum number of attempts.
Maximum attempts = Zone 1 attempts + Zone 2 attempts / The default is 3.

Maximum number of sessions in the portal

Hi,
Please, do you know the maximum number of sessions that a particular user can open in the portal 7 ?
and it´s posible to limit the number of sessions of a user
thanks in advance.

carlos,
you can set a maximum session limit for each web module. so, if you for example want to limit the number of sessions in your portal, you could do it for the Web Module "irj"
Use NWA and navigate to Configuration / Application Module
check: http://help.sap.com/saphelp_nw70/helpdata/EN/b9/665b42cfca5542e10000000a1550b0/frameset.htm
kr, achim

Maximum number of times for the segment in the idoc

I am in WE30 transaction, and i am creating a new idoc type, and i have a doubt in the maximun number of a repeated segment.
Example idoc 1:
Line_of_order xxx
Text y1y1y1
Text y2y2y2
Line_of_order xxx
Text y1y1y1
Text y2y2y2
What would be the idoc orders structure :
A)
Line_of_order min:1 max: 1
Text min 1 max 2
B)
Line_of_order min:1 max: 2
Text min 1 max 4

It would be:
Line_of_order min:1 max: 2
Text min 1 max 2
Regards,
Naimesh Patel

Maximum number of column in the report

Hi all,
We have a Requirement that we need to display 150 column in the output of the report.
Could any one tell me maximum how many we can display in the output.
Thanks in advance

Hi,
We are displying year in the report and this year is coming from date,
but in display year is displaying as 1,994 instead 1994.
Pls help me in resolving this.
Thanks,
Sari

What's the maximum number of values IN (val1, val2, val3, ... valn)

For example, expression IN (val1, val2, val3, ... valn) ,
What's maximum number of values in the IN expression, any URL for oracle document?
Thanks a lot.

SQL> declare
2    l_sql long ;
3 begin
4    l_sql := 'select * from dual where 1 in (' ;
5    for idx in 1 .. 1001
6    loop
7      l_sql := l_sql || idx||',' ;
8    end loop ;
9    l_sql := l_sql || '99)' ;
10    execute immediate l_sql ;
11 end ;
12 /
declare
ERROR at line 1:
ORA-01795: maximum number of expressions in a list is 1000
ORA-06512: at line 10
SQL>

What is the maximum number of row for a table control in LabWindows/CVI ?

I use LabWindows CVI 8.5.1 (MMI first developped in version 6.0).
In one of our many MMI, a table control contains a list of aircraft parameters.
We can add as many parameters (row) as we want but over 40 000 we observe a crash of the LabWindows CVI runtime.
Our client want to inscrease the number of parameters (row) up to 200 000 !!!
So my questions are:
What is the real maximum number of row for the table control ?
Is this maximum number of row different on LabWindows 2010 version ?
Or is there an other solution ?
Thanks

Greetings,
Can you clarify what you mean by "crash"? Is there an error message thrown? Is it possible that you've consumed all of the available memory?
Please let me know.
Thanks, James Duvall
Product Support Engineer
National Instruments

The below vi is not giving me what I want. If I select 2 with maximum number of 3 then there are 3 array elements display that is correct but if I select 8 with the same maximum number of 3 then only 1 array element display. Why is that?

The below vi is not giving me what I want. If I select 2 with maximum number of 3 then there are 3 array elements display that is correct but if I select 8 with the same maximum number of 3 then only 1 array element display. Why is that?
Attachments:
test2.vi ‏29 KB

It's because in case 2 you hold the array build result from the previous loop iteration in a shift register...in case 8 you do not...
You say that if you set the maximum number to three it will produce an array with three elements, that is not correct, it will run when the iteration index is 0,1,2 and 3...resulting in 4 elements. If you want 3 you need to decrement the maximum number to 2. The same goes for case 8.
MTO

BEx Variable Input Help (F4) Maximum Number of Rows

Hi Experts,
We using Bex 3.x version. Now, the user is asking to change the maximum number of rows (by default 500, for my case) to 1000. (While executing the workbook, on the variable pop-up screen where we can search for input help (F4) values). For surely, there is some global setting needs to be corrected but not sure. I have checked in T-code: SPRO and some of the threads but not get the apt solution.
Could you please share us your inputs/experiences as how can we increase maximum number of rows in the input help.
Many thanks in advance!!!
Best Regards
Venkat...

Hello Venkat,
Is there is a way to setup that, you will find into this KBA Article (SAP Note):
> 1565809 - Settings for BW query F4 help
This is a really good documentation about how F4 works and how to setup the configurations and where you have to do that.
Kind Regards,
Edward John

Maximum number of monitors used for remote desktop not working correctly

My goal is to connect from my home to my work machine but limit the number of monitors used to 2.
At work, I have a machine running Windows 7 Enterprise SP1 with dual monitors. My home machine is Windows 8.1 Pro and it has 3 monitors (on two video cards).
I followed the instructions of the MSDN blog post about using multiple monitors for remote desktop but cannot get it to work right.
Here's what I see when I modify the group policy setting "Limit maximum number of monitors" on the target (work) machine:
Setting - Result:
1 - 1
2 - 1 (???)
3 - 3
It looks like I can't limit the number of monitors used to 2, I get either one or all. Am I missing something or is this by design?
Max

Hi Max,
Support for multiple monitors is available when connecting from any Windows 7/8.1 computer, however, there are restrictions when connecting to a computer using multi-monitor mode. When connecting to Windows 7 computers, only computers that are running Windows
7 Enterprise or Ultimate can be connected to in multi-monitor mode. When connecting to Windows 8.1, only computers that are running Windows 8.1 Professional or Enterprise can be connected to in multi-monitor mode.
Karen Hu
TechNet Community Support

Maximum number of contacts for Symbian phone

Hi,
Anyone knows what is the maximum number of contacts one can store for their Symbian phone?
For example, I am using N95 8GB. I loaded in 5000 numbers and I have nothing else in the phone. When I try to access to the phone book, phone prompts me "Memory full".
Previously, I have tested loading in 3000 contacts into my N80 and the same thing happens.
I did a check on Symbian's technical specification and also on the phone's technical specification. It says the number of contacts supported relies on the dynamic memory.
I tested my massive contacts on a RIM device, it works perfectly. Maximum number I stored in the RIM device is close to 5000.
Anyone facing such a similar issue?

I have had the E51 for nearly 3 years and have regularly stored 2,500 contacts on it with no problems. T9 Nav can find them quickly; they insert in the fields of emails without problems.
Came to this thread because I just bought a secondhand N86 and I'm having problems with that number of contacts: as soon as I create an email from within Contacts I start to get out of memory messages and cannot open any other entry in the address book until I shut down the phone and restart it. Likewise if I starat an email and then search for an entry in the To field, the search fails and I start getting out of memory messages
This doesn't seem correct for a newer phone with more memory: anyone have experience of this?
I tried soft and hard resets, firmware is updated. The next step is to reinstall the firmware, but that is not working because Nokia Suite gives a 'service unavailable' message just at the end of the reinstall process. Anyone have ideas about this problem?

Maximum number of restricted search folders in later versions of Exchange?

Hi,
This article:
https://technet.microsoft.com/en-us/library/cc535025.aspx
...states that:
"In Exchange 2000 Server, Exchange Server 2003, and Exchange Server 2007, there are a maximum number of restricted search folders that are allowed on a per-folder basis. The default maximum number is 11, and the default lifetime for the search folder
is 40 days."
1) Does this apply to later versions of Exchange Server too?
2) Can the default maximum be changed, to say 100? Is there a limit?
Thanks,
Mats

500 images in a single gallery is too many - think of the poor viewer!
But if you must create Flash galeries with more than 500 images, you're better off editing the underlying engine - here's one link showing how to do it

Maximum number of retries in the TimeoutThrowHandler

Similar Messages

Maybe you are looking for