Maximum Number of retries

Hi all,
Which field in ICM database depicts the maximum number of attempts (for a certain record) dialer contacts a certain customer if it gets a busy tone, no answer, etc..
Regards,

On the Admin Workstation
Config Manager => Outbound Option => Campaign
Within the Campaign General tab..
In the Dial Setting section there is an option titled "Maximum attempts (1 - 100)"
This setting is defined as follows - Defines the maximum number of attempts that will be made for no answer and busy signal callbacks.
Enter the maximum number of attempts.
Maximum attempts = Zone 1 attempts + Zone 2 attempts / The default is 3.

Similar Messages

  • I  am getting maximum number of retries using icloud account

    I  am getting maximum number of retries using icloud account

    What do you mean by "maximum number of retries"?
    If you are told that you can't create a new Apple ID/icloud account because the maximum has been reached, you have to use another device or computer to create the ID, since there is a max of (I think) 3 or 5 allowed on each device.  This means that your current device has already been used to create the maximum number.

  • Maximum number of retries in the Adapter Engine

    Hi guys!
    I have a question for you, I have many JDBC Receiver CC that for a bad data in their queries cannot be executed correctly in the target DB, and they remain in the Message Monitoring retring (e.g. one of them is in his retry #1700) and they always keep in TBDL status, not changing to System Error. I saw this in the Audit Log tab.
    In the Message Data tab I See these parameters:
    - Number of Retries 3
    - Failed: 1700
    - Retries 300000
    I don't know why that "number of retries" parameters always stays on ' 3 ' value, so I'd like to know where is the real parameter that sets the ammount of times that the message will try to be sent (the correct way in these cases would be no more than 3 tries).
    As an additional data I can tell you that in the definition of the CC I set the parameter in Advanced Mode -> Additional Parameters -> Nunber of retries of Database Transaction on SQL Error = 0.
    Thanx in advance!

    This retry information could be found at Visual Admin->server->services-> SAP XI Adapter: XI. You may also change it from here.
    Regards,
    Prateek

  • Maximum number of retries in the TimeoutThrowHandler

    Hi,
    I am using the following code:
    http://cookbooks.adobe.com/post_Renewing_the_context_to_handle_session_expiry-16410.html
    I am getting a stack overflow error. and the request is tried multiple times on LC  and finally it thows a stack overflow.I wanted to set the retry limit to a finite number.
    Please let me know how to do that.
    Regards,
    Leena

    This retry information could be found at Visual Admin->server->services-> SAP XI Adapter: XI. You may also change it from here.
    Regards,
    Prateek

  • How to set the Maximum Number of the retry interval in sender cc?

    Hi,gurus:
    You know about how to set the Maximum Number of the retry interval of receiver communication channel in RWB.
    But how to set the one of the sender communication channel?
    Can we set that in integration directory?
    Any help will be appreciated.

    Hi,
    Check this blog, For the settings to be done at SXMB_ADMIN Tuning(IS_Retry_Limit )and the VA
    XI :  How to Re-Process failed XI Messages Automatically
    Also in VA change both inbound and outbound retries. For max no. of retry interval change the default value 300000(5 mins) to 600000(10 mins) or whatever you want.
    Thanks!
    Edited by: Sudhir Tiwari on Dec 16, 2008 7:33 AM

  • Illustrator won't run: "unable to set maximum number of files to be opened"

    I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
    CC

    Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
    http://forums.adobe.com/message/2534652
    If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
    Thanks!

  • How to find maximum number of users we can assign for Hyperion Planning.

    HI,
    How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1.
    In Essbase propreties, the system is showing maximum planning users could be 65535.
    what would be the number for concurrent scenario?
    Thanks
    Giri
    Edited by: Giriprasad on Jun 18, 2012 2:18 AM

    The number of users would be based on your license agreement with Oracle, the system is not aware of your license agreement so it is up to you to stick to it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to set up the maximum number of messages on a queue programmatically

    Hi,
    I am using IMQ 3.5 to implement a message layer for one of my projects. I created a "Job Status Queue", which receives job status report from a java application every minute. But I just want to keep the most current status report instead of all the job running history. How can I restrict the maximum number of messages to 1 programmatically?
    Any suggestion or help will be appreciated.
    Xiaoyun Tang

    You can't limit the destination size programmatically, but you can do it administratively and associate a behavior to occur when the limit is reached. In your case it sounds like you want a queue, 1 message deep, and to discard the oldest message when the queue is full. When you create the physical queue on the broker you can specify these attributes (you can also update them on an existing queue). For example:
    imqcmd create dst -t q -n StatusQ -o maxNumMsgs=1 -o limitBehavior=REMOVE_OLDESTFor more information see Chapter 6 of the Message Queue Administration Guide. In particular the "Managing Destinations" section:
    http://docs.sun.com/app/docs/coll/MessageQueue_35_SP1
    Joe

  • I am trying to setup iCloud account and when I login I see a popup. The Maximum number of free accounts have been activated on this iPhone. Pls, help me fix it. What other accounts? Thanks

    I am trying to setup iCloud account and when I login I see a popup. The Maximum number of free accounts have been activated on this iPhone. Pls, help me fix it. What other accounts? Thanks

    Then you'll have to use another iOS device or Mac running OS X Lion or higher to create a new account for you to use on your phone.  If you don't have one, perhaps a friend would allow you to create and account on their device (note: this will use one of their three maximum accounts).  To do this, they would need to go to Settings>iCloud, tap Delete Account (which will delete the account from their device but not from iCloud), then allow you to sign back in with your ID to create the new account.  Then tap Delete Account to delete the new account from their device, and finally, sign back in with their iCloud ID to restore their iCloud account to their device.  Then you can sign in with your ID on your phone in Settings>iCloud and use the new account.

  • Error message in the report: Exceeded configured maximum number of allowed

    Hi,
    When i'm running one report, it's throwing the following error.
    Error
    View Display Error
    Exceeded configured maximum number of allowed input records.
    Error Details
    Error Codes: EKMT3FK5:OI2DL65P
    SQL Issued: 3302~v9p2gfbm0sfk91lrj16oe7srm2
    This is most common error. my report is retreiving 469,501 rows in the database.
    These are the settings in the instanceconfig.xml :
    <Views>
    - <Pivot>
    <MaxPagesToRollOutInDelivery>1000</MaxPagesToRollOutInDelivery>
    <MaxVisibleColumns>500</MaxVisibleColumns>
    <MaxVisiblePages>2500</MaxVisiblePages>
    <MaxVisibleRows>1000000</MaxVisibleRows>
    <MaxVisibleSections>10000</MaxVisibleSections>
    <DefaultRowsDisplayed>1000000</DefaultRowsDisplayed>
    - <!-- This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control
    -->
    <DefaultRowsDisplayedInDelivery>1000</DefaultRowsDisplayedInDelivery>
    - <!-- This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control
    -->
    <DefaultRowsDisplayedInDownload>100000</DefaultRowsDisplayedInDownload>
    - <!-- This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control
    -->
    <DisableAutoPreview>false</DisableAutoPreview>
    </Pivot>
    Max visible rows are higher than my report rows, but still it is throwing error.
    Please any suggestions !!!!
    Thanks in Advance

    Just in case try to set other views and see how it works
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/answersconfigset.htm#CIHHBHEB
    In WebLogic FMW Control or EM:
    http://server.domain:7001/em
    Click on Fam_bifoundation_domain -> Business Intelligence -> coreapplications -> Capacity Management -> Performance
    Maximum Number of Rows Processed when Rendering a Table View
    Number Of Rows:
    Maximum Number of Rows to Download
    Number Of Rows

  • I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

    I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • HT204053 I have an iPhone 4S and when I try to add an iCloud account is gives me an error "Cannot Sign In, The maximum number of free accounts have been activated on this iPhone." Is there any way to deactivate an account?

    I have an iPhone 4S and when I try to add an iCloud account is gives me an error "Cannot Sign In, The maximum number of free accounts have been activated on this iPhone." Is there any way to deactivate an account? I have one for myself, one for my family and one for my work. I had all three on my iphone and then I deleted my work. I wanted to get my own person @me.com account. It wouldn't let me create it from my iphone, so I created it from my Macbook Pro. I am trying to add it to my iphone, but it keeps giving me that error. If there is a way I can deactivate my work one so I can use my @me.com personal account?

    Welcome to the Apple Community.
    Unfortunately once all the 3 iCloud accounts have been created on your mobile device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another device or computer.
    You should however be able to add existing accounts to your device, are you sure you aren't trying to create on rather than simply use an existing one.

  • Maximum number of photos that can be imported into an iPhoto library?

    1. Does iPhoto have a maximum number of files or photos that it can handle in a single library?
    I have a lot of photos (20GB) that have not yet been imported into an iPhoto Library. I am going to set up a new library with the iPhoto Library Manager (iPLM), but am wondering if there is a maximum number of files that can be handled in a single library?
    2. Also, I don't think I want to import these, since that would create an iPhoto library as large as the source files. Are there any problems if I set up the preferences so that this library will not have the graphics imported into it?
    3. With iPLM, can you have different sets of preferences for each library?
    Thank you for any advice or suggestions.

    1. Does iPhoto have a maximum number of files or photos that it can handle in a single library?
    Apple advertises that iPhoto will handle 250,000 photos - I doubt that anyone has come close to that (or will)
    I have 19,278 in 237 events - 22 GB - on a G5 iMac and it is snappy with no issues
    I have a lot of photos (20GB) that have not yet been imported into an iPhoto Library. I am going to set up a new library with the iPhoto Library Manager (iPLM), but am wondering if there is a maximum number of files that can be handled in a single library?
    If you want those should be fine in one library
    2. Also, I don't think I want to import these, since that would create an iPhoto library as large as the source files. Are there any problems if I set up the preferences so that this library will not have the graphics imported into it?
    It is a choice - if you do NOT import them then you will be responsible for all future management - deleting, etc. Moving to a different location or computer is much more difficult if you reference your photos instead of importing them.
    Many people import them, burn the original source photos to CD or DVD and delete them from their disk letting iPhoto manage them
    3. With iPLM, can you have different sets of preferences for each library?
    I'm not sure but I do not think so
    Larry Nebel
    Message was edited by: LarryHN

  • I cannot sign in to my icloud i reached the maximum number of free accounts for my phone. how will i log in now? it is an i phone 5 and was used for work before and now i want to use it for personal use

    I cannot sign in to my icloud. I have reached the maximum number of free accounts on my phone.
    I am not sure what to do next.. i need to set up an icloud but i cant now.

    Welcome to the Apple Community.
    Unfortunately once all the 3 iCloud accounts have been created on your mobile device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another device or computer.
    You should however be able to add existing accounts to your device, are you sure you aren't trying to create on rather than simply use an existing one.

  • How can we increase the maximum number of records which we export from UME

    Hi All,
             Is there any way to increase the maximum number of records which we can export from the UME.
    Please give your valuable suggestions as soon as possible.
    Thanks in Advance
    Regards,
    Ramalakshmi.S

    I didn’t find any configuration you can set to increase the number. I think it is related UI. The number is designed programmatically.
    Lisa Zheng
    TechNet Community Support

Maybe you are looking for