Maximum number of rules in Numbers? Scrolling for 'show rules'?

I am trying to apply multiple conditional rules to a group of cells but can only get about 13 applied before 'show rules' runs out of space (and can't scroll down to add more). Am I missing something? Any help greatly appreciated - thanks

Thank-you for the help.
I thought I must be missing something because it seems so easy and obvious for Apple to make these rules srcollable. As Jerry says, they probably did't think to try off their 27" screens!
The only trouble with inserting extra rules is of course that it then makes it a 'faff' to later edit or remove rules that have been taken off the viewable screen.
Thanks again.
Ian

Similar Messages

  • How to find maximum number of users we can assign for Hyperion Planning.

    HI,
    How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1.
    In Essbase propreties, the system is showing maximum planning users could be 65535.
    what would be the number for concurrent scenario?
    Thanks
    Giri
    Edited by: Giriprasad on Jun 18, 2012 2:18 AM

    The number of users would be based on your license agreement with Oracle, the system is not aware of your license agreement so it is up to you to stick to it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • The maximum number of connections per source ('20') for this connector has been reached by this source IP address

    Receive connector 'Connector Name' rejected an incoming connection from IP address "IP of our load balancer". The maximum number of connections per source ('20') for this connector has been reached by this source IP address.
    I understand that I can up the limit - however, I'm wondering if there is a way to up the limit for ONE specific IP (our load balancer)
    TAG

    It does not look like you can up the limit for a specific IP but you might be able to create a separate receive connector for that IP address (and then change the limit).
    That is just a thought. Others may have more input on why you may or may not want to do that in practice.
    What SMTP traffic would not be coming from the load balancer?
    Is the objective to *not* allow some other (possibly malicious) source from creating excessive connections to the server?
    Otherwise, this is a good discussion about the different parameters that must be considered if you do decide to adjust the values (changing one may not suffice):
    http://letsexchange.blogspot.com/2012/04/receive-connector-rejected-incoming.html
    Nuno Mota's blog (MVP)
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Is there a maximum number of photos in an album for making an iPhoto book?

    is there a maximum number of photos that you can upload into an iPhoto book from an album?
    trying to make a book and only some of the photos from my album are there

    No
    There is a maximum numb of pages in a book (100 pages) and the larges page I am aware of holds 16 photos so the maximun number of photos you could have in a book would be 1600
    LN

  • Maximum Number of Pages and File Size for PDFs

    Assuming that your computer has ample CPU, memory,and storage, how many pages and what file size does Adobe recommend that you limit a single PDF to using Acrobat Pro XI in order to avoid any issues.

    I don't know whether there's a limit on number of pictures you can add to a book
    as long as they are contained in 100 pages, which is the maximum photo pages on a book.

  • HT204053 I bought an iPhone  from some one and it says the maximum number of accounts has been entered for iCloud login how can I get iCloud now?

    Please help

    Restore it as new.  Why wouldn't you do that when purchasing a used device from another individual?

  • Rule to determe Variant for WS rule generation

    Dear Experts,
    Can some one give me the detail idea about what below variant rule says.
    In what scenario we can use this?
    Rule
    No
    Holiday Cl…
    Hol. Cl. Next Day
    Day
    Variant
    10
    01
    X.........
    XXXXXXXXXX
    ....X..
    10
    02
    X.........
    .X........
    ....X..
    10
    03
    XXXXXXXXXX
    XXXXXXXXXX
    ....X..
    A
    U1
    01
    ..X.......
    XXXXXXXXXX
    XXXXXXX
    A
    Regards
    Vinodh L K

    hi Vinod,
    Its to understand:
    Rule: its name u give to the rule so we can call in DWS.
    No: is sequence of the rule to be followed
    Holiday calendar(3rd column) : HC of current day ie from 0 to 9 - here if we give "x" then its applicable eg:if 'x' is in 1st place then today is working as 0 ref as working day.
    Holiday Calendar (4th column) : HC of next day ie from 0 to 9 - same ie "x" then applicable
    Day: week day - Monday to Sunday -"x" then applicable
    Variant : Define some variant that can be called in DWS
    here in this rule it mentioned that in
    Rule: 10- 1st - today is working day and tomorrow is either working/half day working/holiday the condition should be applicable on Friday because there are four dots before "x"
    Rule: 10 - 2nd - today is working day and tomorrow being half day working then on Friday the conditions should be applicable.
    Rule: 10 - 3rd today is either working/half day working/holiday and tomorrow is either working/half day working/holiday the condition should be applicable on Friday.
    Here the rule is given with sequence but system picks the last ie no: "03" only as the variant is defined.
    Scenarios:
    Actually they tried to tell that if today is working and tomorrow is either working/half day working/holiday or tomorrow is just half day working and today can be either working/half day working/holiday and tomorrow is either working/half day working/holiday then the condition ( eg: reduced working hours or change in shift timings etc) should be applicable.
    But here the rule is given with sequence but system picks the last ie no: "03" only as the variant is defined.
    Regards:
    Sai

  • Maximum number of contacts for Symbian phone

    Hi,
    Anyone knows what is the maximum number of contacts one can store for their Symbian phone?
    For example, I am using N95 8GB. I loaded in 5000 numbers and I have nothing else in the phone. When I try to access to the phone book, phone prompts me "Memory full".
    Previously, I have tested loading in 3000 contacts into my N80 and the same thing happens.
    I did a check on Symbian's technical specification and also on the phone's technical specification. It says the number of contacts supported relies on the dynamic memory.
    I tested my massive contacts on a RIM device, it works perfectly. Maximum number I stored in the RIM device is close to 5000.
    Anyone facing such a similar issue?

    I have had the E51 for nearly 3 years and have regularly stored 2,500 contacts on it with no problems. T9 Nav can find them quickly; they insert in the fields of emails without problems.
    Came to this thread because I just bought a secondhand N86 and I'm having problems with that number of contacts: as soon as I create an email from within Contacts I start to get out of memory messages and cannot open any other entry in the address book until I shut down the phone and restart it. Likewise if I starat an email and then search for an entry in the To field, the search fails and I start getting out of memory messages
    This doesn't seem correct for a newer phone with more memory: anyone have experience of this?
    I tried soft and hard resets, firmware is updated. The next step is to reinstall the firmware, but that is not working because Nokia Suite gives a 'service unavailable' message just at the end of the reinstall process. Anyone have ideas about this problem?

  • BEx Variable Input Help (F4) Maximum Number of Rows

    Hi Experts,
    We using Bex 3.x version. Now, the user is asking to change the maximum number of rows (by default 500, for my case) to 1000. (While executing the workbook, on the variable pop-up screen where we can search for input help (F4) values). For surely, there is some global setting needs to be corrected but not sure. I have checked in T-code: SPRO and some of the threads but not get the apt solution.
    Could you please share us your inputs/experiences as how can we increase maximum number of rows in the input help.
    Many thanks in advance!!!
    Best Regards
    Venkat...

    Hello Venkat,
    Is there is a way to setup that, you will find into this KBA Article (SAP Note):
    > 1565809 - Settings for BW query F4 help   
    This is a really good documentation about how F4 works and how to setup the configurations and where you have to do that.
    Kind Regards,
    Edward John

  • What is the maximum number of Active Connection in SSG 7206VXR?

    Hi,
    What is the maximum number of SSG Host or active connection (show ssg service package) for Cisco 7206VXR which running with NPE-G1? The SSG is deploying with Web-login and the TCP-Redirect, Port-bundle and Pass-through is enabling. The SSG is to handling IP session authentication. The SSG is binding Gigabit Ethernet.
    The current version of IOS is show as below.
    Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(9)T1, RELEASE SOFTWARE (fc2)
    Thanks,
    Chia

    To set the maximum number of services per user, use the ssg maxservice command in global configuration mode. To reset the maximum number of services per user to the default, use the no form of this command. ssg maxservice number and no ssg maxservice
    If you want to know more please click following URL:
    http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_command_reference_chapter09186a008017cf59.html

  • Maximum number displayed files in Folder in Dock?

    One of our users has over 800 files saved directly in her Documents folder. We keep this folder in the usual location, and also have it displayed in the Dock as a "list". When she clicks on the folder, about the first half of the files show up - if displayed alphabetically for example, she gets A - M.
    Does anyone know if this is fixable? I'm assuming here that there is some maximum number of displayed files which maybe I can fix by editing a .plist or something. It drives her nuts to have to do the "open in Finder" thing half the time, but not the other half of the time (obviously, when she opens this folder as a Finder window everything is there, it is only the display in the Dock which refuses to show all items).
    Thanks!

    Thanks for the info. There is indeed a maximum number of files that the dock will show in the contextual menu. Yeah, it would be best if the user wouldn't keep everything organized like that, but it isn't possible to lean over someone's shoulder all the time...

  • Maximum Number of Results in Incident (ZMIN)

    Hello!
    How is it possible to increase Maximum Number of Results in Incident (ZMIN) for all users?

    1) Assign parameter SEARCH_MAX_HITS to a parameter profile in the following IMG and set this value to any 200or whatever you like
    CRM >> UI Framework >> Technical role definition >> Define parameters.
    2) Then, assign your parameter profile to your business role:
    CRM >> UI Framework >> Business role >> Define business role.
    http://wiki.scn.sap.com/wiki/display/CRM/Usage+of+Configuration+Params
    Thanks
    Vikram

  • Why i'm getting a warning 1021 even after changing The maximum number of connections per source (Unlimited) ?

    The maximum number of connections per source (Unlimited) for this connector has been reached by this source IP address.

    Hi Arun,
    In order to figure out the source of the problematic IP, we need to collect the following logs:
    Detail messages of the Error 1021 including the blocked IP address.
    Protocol log. We can search the specific IP address in the log to find more information about the sender. Here is the reference of
    Using the EAC to configure protocol logging.
    Besides, use the command below to verify if they are set as expected:
    Get-ReceiveConnector -Identity "this connector name" | select Message*,MaxInbound*
    Regards,
    Rebecca

  • Maximum number of contacts in Skype to go

    Hi,
    I have been using Skype to go for a while and I decided to add additional contacts. However, when I logged-in today I can't find a button/link to add more contacts. I currently have 9 contacts. Is that the maximum number I can add?
    Thanks for your help!

    Hello,
    Yes 9 is the maximum.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Maximum number of simultaneous Template requests coldfusion 10 standard is not working

    I tried to change the setting to 5 and submit changes, under request tuning setting ->
    Maximum number of simultaneous Template requests is still showing as 0 even after the Coldfusion service restart.
    thanks

    Hi
    In ColdFusion 10 Standard the Simultaneous requests should be equals to 10 or more than 10 however in ColdFusion 10 Enterprise there is no such restriction, the value can be of a single numeric digit as well like 5,4,6 or so on.
    You can consider this as a benefit of running ColdFusion 10 enterprise
    Thanks
    VJ

Maybe you are looking for

  • How do i backup my itunes library?

    hi all, is there any way i can backup my itunes libary with a dvd? i'm not interested in playing the music from it, just to have in case of hard drive failure. i thought of making one huge playlist but that seems like the wrong way to go about it. an

  • Document content do not appear in finder preview, quick look or cover flow

    The contents of all types of appleworks documents do not appear in finder preview, quick look or cover flow on both of my computers. The generic AWKS logo appears. Why does this happen and what can be done to correct this? I have repaired permissions

  • Is it a Bug of JDK?

    JSlider m_Slider = new JSlider(); m_Slider.setMajorTickSpacing( 10 ); m_Slider.setSnapToTicks( true ); when the system use windows lookandfeel,it works properly,but if the system use MetalLookAndFeel, the last sentense doesn't work,I use jdk1.4.1 is

  • Used IMac G5 - no airport or wireless connection

    Hi All I have just purchased a 2nd IMac which was 2nd hand. The seller said it had airport but im quite sure now that it is home that it doesnt. How can i get a wireless card for this (Mac?) and can they be fitted to this computer. I have an old wire

  • Problem about libCrun.so on Opteron/solaris10

    libCrun.so in my Opteron/solaris10 seems has problems: 1. the symbol "__1cH__CimplMex_terminate6F_v_"( __Cimpl::ex_terminate ) in libCrun.so uses R_AMD64_PC32 mothed to resolve. ------------------ex.cpp------------------ extern "C" void __1cH__CimplM