Maximum number of server nodes for a dispatcher

Hi,
Is there a maximum (recommended) number of server nodes that can be created per dispatcher, for the 6.40 J2EE Engine? We are considering using a 16GB RAM server with 1 dispatcher and 8 server nodes to run our EP6 SP18 portal. Are there any implications we should be aware of with this setup? Is there any additional configuration for the dispatcher necessary for a high number of server nodes?
Any advice greatly appreciated, points will be awarded.
Many thanks
Jane

Alexander Türk wrote:
> Hello,
> at the moment under aix, 64bit, nw2004s the maximum number of server nodes is 16.
> regards,
> alexander
Hello,
at the moment under aix, 64bit, nw2004s the maximum number of server nodes is 16.
regards,
alexander
Hi Alexander,
Thank you for the information.
Is this information documented somewhere in SAPNote or help.sap.com ?
Regards,
Prashanth

Similar Messages

Optimum number of Server nodes for CC

Hi Guys
Just wanted to know what is the optimum number of server nodes for Compliance Calibrator?
By server nodes I mean the ability of CC to process jobs parallelly
Parveen

Hi..
By default you should see 3 bg job threads and 5 web services threads per server node.
Refer the note:1121978
In Risk Analysis and Remediation Configuration > Performance Tuning
Regards
Gangadhar

Set maximum number of BPM nodes

Hy all,
can someone tell me how can i set the maximum number of bpm node in XI.(Transaktion for example)
Thank's a lot.
Mat

Hi Jürgen,
You can try changing this with TCODE: SWPA
"Maximum node number" parameter
By default the value is 10.000 (at least on my DEV XI)
maybe this will help you
Regards,
michal

The maximum number of Web Parts for all zones on this page has been exceeded.

Hi All,
I am getting following error message when making a new view for SharePoint Form Library
The maximum number of Web Parts for all zones on this page has been exceeded.
Any help in this regard will be greatly appreciated...

When you are looking at the page append the following at the end of your URL: ?contents=1
Your URL should look something like this:
http://contoso/site/default.aspx?contents=1
This will open the web part maintenance page. How many web parts are listed? You might have a large number of closed web parts that aren't showing on the page but are actually still there.
John
SharePoint911: SharePoint Consulting
Blog: http://www.rossonmoss.com
Twitter: JohnRossJr
MOSS Explained: An Information Workers Deep Dive into Microsoft Office SharePoint Server 2007

How to create one more server node for SAP J2EE server?

Hi,
Can any one please suggest how to create one more server node for SAP J2EE server? I am using WAS700.
Thanks and Regards,
Smriti.

Hai,
Login into the Configtool(C:\usr\sap\SID\DVEBMGS<inst no>\j2ee\configtool) if ABAP+JAVA stack or C:\usr\sap\SID\JC<inst no>\j2ee\configtool) if JAVA stack
click on the instance and and select the addserver button on the top to create a servernode for J2EE server.
Thanks and Regards,

Set maximum number of responses allowed for a form

Would it be possible to set a maximum number of responses allowed for each form? Say, if more than 1000 responses are received, the form will be closed automatically and no more new submission can be made.
Thanks in advance

Hi,
FormsCentral doesn't support this functionality. Currently 50, 500, 5000 limits are set for free, basic and plus accounts, you cannot set a different limit for individual forms.
Thanks,
Wenlan

Maximum number of Apple id for this equipment

I have aproblem to setting icloud in my Macbook, I use a Apple Id, but I receive a nessage:
Maximum number of Apple id for this equipment

with the insanity of apple adding on an add'l apple id every time you use a different email to buy an iTunes item, it's pretty easy to hit the limit of items.
this morning i had ELEVEN accounts in my itunes library. Tonight i have FOUR.
i used an applescript i downloaded from doug's applescripts:http://dougscripts.com/449
his vesion will group all purchases into playlists such as Doug's Purchased Items, but had a bug where it uses the 'real name' not the 'account' so would say "Joe Smith's Purchased Items" vs [email protected] That said it will help immensely.
I re-wrote the script to find the ACCOUNT name and group them and also put into the 'composer' tag so i could convert old outdated email apple ids from AAC protected to MP3, now i have FOUR apple IDs.
(to convert from AAC to mp3 you need to burn to a CD and re-import; you can import as AAC or mp3; i prefer mp3 so i can burn to an mp3 cd for the car).
movies/apps/tv-shows all count.
-awr

HT4528 icloud says maximum number of free accounts for this iphone how can i make it work?

icloud says maximum number of free accounts for this iphone how can i make it work?

You have created too many accounts. There's no way to get around this.

You have reached the maximum number of PIN changes for this account"

today i change my device to z10,when run BBW,it shows this message :
You have reached the maximum number of PIN changes for this account. Please visit http://www.blackberry.com/appworld/support for more information.
how can I solve this problem?
many thanks!

BBID: **Removed**
device：z10 stl-2
pin:**Removed**
thanks : )
Edit: PIN, Email ID removed. At no time should you provide any personal information to any other community member. Please review the Community Guidelines and Terms and Conditions of Use. for further information

Maximum number of dialog processes for sending data

Hello All,
How to change the Maximum number of dialog processes for sending data from default value ?
I see this infopackage->Scheduler->Settings for Sending Data--
>Maximum size of a data packet as 3 .....Can we increase this setting to 5 for faster extraction?
if yes,,,please let me know how & where we can change this...
Thanks,

Hi,
in the source system table:table ROIDOCPRMS
change these:
MAXSIZE
MAXPROCS
STATFRQU
thnks.

Deactivate Portal server node from Web dispatcher, but still keep online

We want to deactivate a Portal server node from the Web dispatcher. We also need to connect directly to the specific node.
We configured the Server Node using Config Tool --> Server_ID####### --> Debug --> Debuggable --> Restricted Load Balancing. The node is not available to the Web dispatcher, However we are unable to explicitly connect to that node. We get the error message in the browser:
503 Service Unavailable
SAP WebAS engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
I have also read through the Web dispatcher online Help. They mention creating groups but they all seem to pertain to ABAP groups using SMLG. Our Web dispatcher is used in a strictly J2EE environment.
There must be a Profile setting or some config to restrict specified nodes... Let me know if you have found out?
Thank You,
Jon Sells

Hi PR,
Yes I understand that the Web Dispatchers Job ends at that point. That's why I want to stop the requests at the Web dispatcher by not allowing those nodes to be available.
Here is the situation. We have 3 Windows Servers with 10 Server Nodes spread accros them.
Host A - 2 Server Nodes, Central instance (Message Server) and SQL Server DB.
Host B - 4 Server Nodes.
Host C - 4 Server Nodes.
The Going Live Analysis suggested we move the DB off of the CI. We cannot do that at this time. What we can do is shut down the 2 nodes on Host A. Instead of shutting them down, we would rather remove them from the WD group. that way, our users never connect to the 2 nodes on the CI but Basis can still use them for Administration and those 2 nodes on the CI are never used for production purposes. Those nodes will just be used for monitoring and maintenance or even emergency purposes.
Right now our process to remove the 2 nodes from the Web dispatcher is to connect to the Admin page for Web Dispatcher --> Monitor Server Groups --> Right Click on the Host and select Deactivate. We have to do this whenever the Message Server is retarted. The million dollar question: How can that be set via a startup parameter?
Thanks
Jon Sells
Here is an example of how you can connect to a specific node:
https://<Host_name>.domain.local/b2b/b2b/init.do;sapj2ee_irj=7501753

How to get Maximum Number of Concurrent users for last few days?

Hi,
How I can get maximum number of concurrent users which were logged in to the system (ECC 5.0) I mean I want to check the hostory for last few weeks. Is there any way to get the same? I know that I can get Cumulative number of users in st03 under Expert mode but that is the number of users logged into the system during the day. Is there any place where SAP maintians the High Watermark of Number of concurrent users reached in the system?
Thanks in advance...
Regards,
Pravin

Sorry I really missed that I have posted a question here on sdn. I wanted to know this for planning the system hardware requirements. Activities like PM ( Performance Management ) happens once a year and during that activity we see heavy user loan on the system so if I have the exact stats of 1 or 2 years data I can size the system better next time. Fortunately last 2 years PM was very smooth for us. In that look for the improvement because each time we had little extra Harware. By doing the exact analysis we can save a Cost of ownership...
I was looking for R/3 users. I could see the number in st07 but I want to know the exact number at particular time.. I believe that st07 stores only for few days.
Thanks
Pravin

Set "Maximum number of recipients" option for specific users in Exchange 2010

I have some set of users who usually send bulk emails outside. I need to increase the value for these users for"Maximum number of recipients" as 999.
Any help or suggestion is appreciated.
Thanks,
RIWAA
RIWA

Hi Riwa ,
Really sorry for providing the wrong value on MaxRecipientEnvelopeLimit in my previous post.
The default value for MaxRecipientEnvelopeLimit is 5000
Reference Link : http://technet.microsoft.com/en-us/library/bb124151%28v=exchg.150%29.aspx
MaxRecipientEnvelopeLimit
Optional
Microsoft.Exchange.Data.Unlimited
This parameter is available only in on-premises Exchange 2013.
The MaxRecipientEnvelopeLimit parameter specifies the maximum number of recipients in a message. The default value is 5000. The valid input range for this parameter is from 0 through 2147483647.
If you enter a value ofUnlimited, no limit is imposed on the number of recipients in a message. Exchange treats an unexpanded distribution group as one recipient.
ANDY thanks a lot for intimating and making me to have a clear understanding on this case.
Thanks & Regards S.Nithyanandham

Maximum number of monitors used for remote desktop not working correctly

My goal is to connect from my home to my work machine but limit the number of monitors used to 2.
At work, I have a machine running Windows 7 Enterprise SP1 with dual monitors. My home machine is Windows 8.1 Pro and it has 3 monitors (on two video cards).
I followed the instructions of the MSDN blog post about using multiple monitors for remote desktop but cannot get it to work right.
Here's what I see when I modify the group policy setting "Limit maximum number of monitors" on the target (work) machine:
Setting - Result:
1 - 1
2 - 1 (???)
3 - 3
It looks like I can't limit the number of monitors used to 2, I get either one or all. Am I missing something or is this by design?
Max

Hi Max,
Support for multiple monitors is available when connecting from any Windows 7/8.1 computer, however, there are restrictions when connecting to a computer using multi-monitor mode. When connecting to Windows 7 computers, only computers that are running Windows
7 Enterprise or Ultimate can be connected to in multi-monitor mode. When connecting to Windows 8.1, only computers that are running Windows 8.1 Professional or Enterprise can be connected to in multi-monitor mode.
Karen Hu
TechNet Community Support

Maximum number of field values for an Authorization object

Hello Experts,
What is the maximum number of field values can be put into the role, Is there any restriction for number of values in any authorization field?
I have put 326 values for field OBJTYPE in authorization object S_DEVELOP but not able to generate the role it is showing error.
I know I can split the values in two or more instance but wanted to know if there any other way out for this (without creating more instances)
Thanks
DK

If the values for OBJTYPE are not uniquely the same, then the system will not merge them - so nothing will be lost.
Here is another trick for you: Choose one of the transactions in the role (or create a "symbolic" one for it") where you want to have the OBJTYPE proposed automatically from. Now maintain one or two of them in SU24 and then download it to your PC. Now from the F4 value range of the OBJTYPE, add all of those values you want via copy&paste into the file and then upload into SU24 again. A read old / merge new in PFCG will then swing all the values in for you.
Single values are always better, as you do not know what else is hidden in the range or might be added in future. It is however common to see FROM / TO ranging around values such as DEBUG and FUGR although all aspects of S_DEVELOP are dangerous - even in display mode.
Cheers,
Julius

Maximum number of server nodes for a dispatcher

Similar Messages

Maybe you are looking for