Maximum numbers of entries in a layout.

I load a file using a function module and I display the data loaded into a layout.
I am getting the following error:
Too many rows for the entry screen, see long text
Message no. UPP_PP_K008
Diagnosis
In manual planning, at most 9999 rows can be processed in the entry screen per characteristic combination of characteristics in the header area of the planning layout. However,                                               12749 rows were generatedinternally for the entry screen.
System response
The action is terminated.
Procedure
Measure the selection in the planning package, so that no more than 9999 rows are generated. In planning layouts use the option 'all possible characteristic combinations' with caution,  as the system possibly generates an awful lot of characteristic combinations. The F1 documentation on the All Possible Characteristic Combinations option in the layout definition, contains more information on the effects.
How can correct this so it allows me do load a big file like this?
Thank you..

Hi Macro,
Pls try for key figure model,as for this purpose the introduced this model.(In key figure model, u have the requried chracterstics of yours as attributes for chracterstic called 0SEMPOSIT. The values of ur chracterstics are placed in 0AMOUNT.)
***pls assign points,if info is useful***
Regards
CSM Reddy

Similar Messages

  • Fast entry in method layout

    Hi Friends,
    What is the Fast entry in method layout.
    Can anybody expain of the concept of Mehtod layuts and Fast entry.
    what is the use of " Fast Entry" in the method layout.
    Will assign the point.
    Thanks
    SAP

    sapsem wrote:>
    > Hi Friends,
    >
    > What is the Fast entry in method layout.
    Fast entry in the Method layout is used for creating steps in the method.
    >
    > Can anybody expain of the concept of Mehtod layuts and Fast entry.
    > what is the use of " Fast Entry" in the method layout.
    > Will assign the point.
    >
    > Thanks
    > SAP
    Mathod Layout is a customizing tool in SEM-BCS. A method layout determines the appearance of the step hierarchy for the methods that are based on that particular method layout; it is also configuration step which characteristics and key figures from the consolidation area are used in the methods and availability of these characteristics for input.
    Fast entry in the method layout is used for creating steps in the method. By creating steps, it is possible to meet specific consolidation requirements, items group wise.
    For further information, please see the SAP help :
    http://help.sap.com/saphelp_sem60/helpdata/en/9c/f0783b07efd234e10000000a114084/content.htm

  • I am not able to get into icloud account my device flashs following message maximum numbers of free account has been activated on this iphone pls help me to rectify

    i am not able to get into icloud account my device flashs following message, maximum numbers of free account has been activated on this iphone pls help me to rectify

    you are only able to use up to 3 icloud accounts on an ios device.
    your only option is to use one of the accounts you already have.

  • Hi people, can anyone tell whether one has the possibility in numbers, the entries in the pop-up menu to sort alphabetically me

    hi people, can anyone tell whether one has the possibility in numbers, the entries in the pop-up menu to sort alphabetically me

    Hi Dieter,
    Your profile shows Mac OS X (10.6.8) so it seems you are using Numbers version 2.x
    Numbers 2 does not have the ability to sort Pop-Up Menu entries (except by a painful process of adding or subtracting entries in Inspector).
    Numbers 3 makes Pop-Up Menus a breeze. But it is your choice whether to update to OS X Mavericks and Numbers 3 . Some features have been lost, other features have been added, and there are some workarounds.
    Have a look at these threads before you decide:
    Features that Apple has promised to reinstate:
    http://support.apple.com/kb/HT6049
    Hints on workarounds here:
    https://discussions.apple.com/message/23622372#23622372
    What has been GAINED in Numbers 3 is here:
    https://discussions.apple.com/thread/5473882?start=75&tstart=0
    What has been lost in Numbers 3 is here (with corrections where Apple has already reinstated some lost features in the Numbers 3.0.1 update):
    https://discussions.apple.com/thread/5470448?start=240&tstart=0
    Regards,
    Ian.

  • What are the maximum numbers of parameters that a subvi can be obtained?

    What are the maximum numbers of parameters that a subvi can be obtained?

    I'm not sure I understand exactly what you mean. Do you mean to ask how many parameters you can pass to a subVI? That would be a very large number because a connector pane can have a dozen or so terminals--and if each terminal is a cluster... You could pass a very large number indeed.
    Having said that however, you probibly wouldn't want to. Remember the more parameters you're passing the more tightly coupled your code is--and the less reusable the code will probibly be.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Maximum Number of Entries for Upload in Custom Table

    Hi All,
    I have a requirement to create a custom table, and then a custom program will be used to upload the data entries. The user is expecting to upload more than 5000 entries at one load. However, the program is encontering a dump. Is there a maximum number of entries which can be uploaded via foreground execution?
    Is there any other way to upload more than 10,000 entries at one execution?
    Thanks,
    Louisse

    Hi,
    No restrictions for number of records to be upload in custom table.
    You have to go to technical settings, there select Size category for number of data records of table expected.
    Regards,
    Jyothi CH.

  • PAB maximum number of entries exceeded

    Hi, we are an ISP and some user say he's having the message "maximum number of entries exceeded" when tries to create a new contact in his address book in webmail.
    I did my research and find my user has 500 contacts and also find that using "configutil" to modify the parameter local.service.pab.maxnumberofentries can solve the problem
    So i did it:
    /jes/bin/SUNWmsgsr/sbin/configutil -o local.service.pab.maxnumberofentries -v 1000
    Now if i tipe
    /jes/bin/SUNWmsgsr/sbin/configutil -o local.service.pab.maxnumberofentries
    I get
    1000
    The i restarted LDAP:
    /jes/bin/SUNWldap/slapd-users/restart-slapd
    Then refreshed the instances by tipping:
    /jes/bin/SUNWmsgsr/sbin/refresh
    Refreshing store server 787 ... done
    Refreshing imap server 788 ... done
    Refreshing pop server 789 ... done
    Refreshing http server 790 ... done
    Refreshing sched server 791 ... done
    Then i restarted webmail and nothing seems to happens because the user stills getting the same error when trying to create another contact: "maximum number of entries exceeded"
    What am i missing? what am i doing wrong?
    Thanks for the help

    rpocamilo wrote:
    So it hanged out and says timeout and i had to do kill -9 Please note that if a store process hangs (imapd/ims-master/imexpire/stored/popd and mshttpd in MS6.2 and below) and you need to manually kill it (e.g. as you have above) then you must restart the entire store otherwise orphan database locks will be left behind and you will find that users will have trouble accessing accounts and store utilities can hang etc.
    So you need to run:
    ./stop-msg; ./start-msgRegards,
    Shane.

  • Maximum number of entries per databases with IPlanet 5.X ?

    So when multiple databases are necessary to hold a DIT.

    There is no maximum. It is really a function of how much physical memory and disk space you have. I think the maximum number of entries is either 2 billion or 4 billion, depending on if the entryid is a signed or unsigned 32 bit integer.
    Why? How many entries do you need to store?

  • Ip sla %Already at System Maximum Number of Entries

    Hi,
    i tryed to configure ip sla and got message-
    c3825(config)#ip sla 1
    %Already at System Maximum Number of Entries of 17324
    But there are not any ip sla entries....
    How to fix it?
    Regards,
    Mike

    What version of IOS ?  Is your tool creating and deleting entires ?
    Might be hitting this
    CSCtq69408    IPSLA engine III Can't create new probe -max number of probes reached
    Bug Toolkit to view
    http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
    or you have all the entries consumed ?  what output of show ip sla application ?

  • HT201342 Hii,, i will not open my iCloud.its showing me:the maximum numbers of free accounts have been activated on this iPhone,what should I do

    Hii,, i will not open my iCloud.its showing me:the maximum numbers of free accounts have been activated on this iPhone,what should I do

    Yes, you can do that.  Settings>icloud, scroll to bottom of page and tap Delete (if it's currently logged into some other account).  Then sign in using you ID.  Somehow, what you were doing before ended up trying to create a new account/ID.  That you can't do more than five times.

  • Could'nt sign to icloud. It shows error i.e. Maximum numbers of free accounts activated on this iphone

    Could not sign into icloud shows maximum numbers of free accounts activated on this iphone

    Each device can only create three free iCloud accounts.  Once these are created, you cannot create another account on that device.  You can only re-use one of the accounts previously created, or create a new account to use on another iOS device (running iOS 5 or higher) or Mac (running OS X Lion or higher), if you have one.

  • Help please with Page Numbers & Facing Pages in Book Layout

    I am having some dramas with my book project which is 168 pages including cover.  I have created 22 different documents for the chapters and other pages.  I had everything in a book and have been able to create a PDF, but then I needed to remove the cover so it can be printed separately and to change the page numbering to start at 1 after the contents page.
    When I added numbers after the Contents page, it pushed all the pages out of order - ie what was previously sitting on the left was now sitting on the right etc.
    Removing the cover also impacted on individual spreads.
    Since then I have:
    - Updated my program to resolve an issue where Indesign kept shutting down when I tried to change page numbers.
    - Recreated the book twice, but find the spreads are all out of whack as I add them - doesn't appear to be auto paginating.
    - Called Adobe and got given tutorials that have not helped me resolve the issue because I have followed the tutorials but it hasn't resolved the issues I am having.
    Is there a way that you can stop autopagination and tell the pages which side they need to be on?  I currently have one chapter finishing on an even number of pages and the next starting on an odd, even though there are an even number of pages in that chapter, which is bizarre?  How do I fix this please?
    I would sincerely appreciate anyone who can tell me how to fix this.  I have read and watched so many tutorials showing how to set it up but there doesn't appear to be any that help with trouble shooting when you have followed the process but something bizarre happens.
    Is there a way that you can dictate the sides that the pages should be on?  Can you turn off the auto pagination anywhere?  This is an urgent request.
    Thanks,
    Hayley
    PS  I started in CS6 and am now using CC.

    A few things to consider:
    Not all books are the same, but many begin on page one, which is a right page, and as it follows, all odd pages will be on the right with even pages on the left. If your book had the cover as part of the book, I wonder if that meant that your first page was on the left?
    Books leaves hold two pages (front and back), and therefore book page counts need to be divisible by two. You say your book is 168 pages including the cover, which you moved to another document, leaving 167 book pages. If you were counting the back page, that might make for a 166 page book, which would be OK, but depending on how it will be printed, the page count may need to be divisible by 4, 8, 16, or higher, and the printer may need to add blank pages to get to the correct page count. Can you tell us how your book will be produced?
    Many people like to keep  their chapters in even-numbered page count, so that new chapters may start on the right. This sometimes requires you to have a blank left-sided page at the end of some chapters. This blank page is sometimes labeled "This page intentionally left blank" or some such wording (so as to let the reader know there wasn't a misprint), but isn't strictly necessary. Sometimes an ornament in the center of the page will do the same job.
    Do you think these are things you would like to have in your book, or are you opposed to them for any reason? The answers may narrow the advise you get from the forum users.

  • Web based data entry for BCS layout

    Dear Gurus,
    Please advice how to enter the data using web layouts into the BCS cube. I know that we cannot simply generate the layouts from BCS workbench like we can do using BPS0 for Business planning transactional cube, but I know that BCS also has this feature available to use web for entering transaction data.
    Please advice.
    Thanks
    Abhinav

    Hi Jide,
    BCS offers an own fexible upload which you could use for the non SAP companies, without BW ETL
    you can create a BCS task for the BCS Monitor where you can load flatfiles.
    check: http://help.sap.com/erp2005_ehp_02/helpdata/en/52/6d973bef5cf61de10000000a11402f/frameset.htm
    for the SAP companies you can use the "Load from datastream" to load data from a BW Infoprovider:
    check: http://help.sap.com/erp2005_ehp_02/helpdata/en/52/6d973bef5cf61de10000000a11402f/frameset.htm
    I hope this answer is helpfull for you.

  • Know: numbers of entries in the directory   ??

    Hi.
    would like to know the number of directory entries.
    I use the command *./dsconf info -h localhost -p 389 -v*
    this shows the following
    Instance path : /var/opt/SUNWdsee/dsins1
    Global State : read-write
    Host Name : amtest
    LDAP Port : 389
    SSL Port : 636
    Total entries    :  3908
    Suffixes : dc=example,dc=cl (master)
    Dest. Servers : localhost:389
    localhost:6389
    No active tasks
    The "info" operation succeeded on "localhost:389".
    Total entries These are the entries in the directory???
    Thanks
    Edited by: Rodrigo0461 on Oct 31, 2012 11:26 AM

    Yes Total entries is the number of directory entries present in OID. Each entry corresponds to collective information about a record or an object.

  • What are the minimum and maximum numbers of a Concurrent Request ID

    Hi,
    Just wondering where the concurrent request IDs start e.g. 0,1, or 10000 and where they "tick over". E.g. is it at 9999999, 99999999 or higher.
    I've got a feeling they start with four or five digits perhaps at 1000, but I haven't been able to uncover a direct reference in the manuals or on the Support site. I don't think the maximum size in the table FND_CONCURRENT_REQUESTS is the whole story but may be wrong.
    Oh, I'm talking about an 11.5.10.2 instance in my case, but would be interested in the case for 12 too.
    Regards,
    John

    jtowns wrote:
    Hi,
    Just wondering where the concurrent request IDs start e.g. 0,1, or 10000 and where they "tick over". E.g. is it at 9999999, 99999999 or higher.
    I've got a feeling they start with four or five digits perhaps at 1000, but I haven't been able to uncover a direct reference in the manuals or on the Support site. I don't think the maximum size in the table FND_CONCURRENT_REQUESTS is the whole story but may be wrong.
    Oh, I'm talking about an 11.5.10.2 instance in my case, but would be interested in the case for 12 too.
    Regards,
    JohnCheck the max value of FND_CONCURRENT_REQUESTS_S sequence -- In 11i/R12, it is 2000000000
    Thanks,
    Hussein

Maybe you are looking for

  • Inbound idoc for updating delivery date of purchase order

    Hi All, Our vendor sends a delivery file consisting of delivery date and quantity(could be partial) for line items of a purchase order. I need to update the Purchase order line item with the delivery date and quantity sent from the Vendor. It should

  • ICal on the iPhone???

    My wife and I do not own a Apple computer. We are going to purchase iPhones tomorrow. My question is does iCal come with the iPhone? If so can you access your iCal calendar from a non-Apple computer via the internet? We currently use Google Calendar,

  • Time Machine: New Hard Drive Unable to be "formatted"?

    Dear community, I apologize for this post, I searched a little but aside from the current TM bug, I had a hard time finding an answer to this question. I'm also re-installing on my other laptop so I am unable to reproduce this SNAFU. I recently ungra

  • Com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this

    hi All, We are getting below error while connecting to an FTP location through File Adapter: Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server

  • Unable to open pserverconnection in cvs

    Hai I am using java cvs for my application.First i created the pserver connection but It didn't work well. It gives null Pointer Exception. I don't know why. Anyone plz help me? Thnx in advance Here is my Source Code try{ PServerConnection c =new PSe