Maximum project size?

I've had a request to produce a video backdrop for a conference and my client has requested a movie size of 5250pixels x 1050pixels, however Motion will only allow me to enter a maximum 4096pixels. Is this the maximum allowed in Motion or a limitation of my hardware? Any advice would be appreciated.

It's a limitation of your graphics card and 4K is the max possible. But the request doesn't make sense - you can project even standard definition to a very large screen - why would they want something so huge?

Similar Messages

  • Maximum project size exceeded

    Is there a way to change the maximum project size? I have an index of images on a drive, broken into folders, and I want them all in the same project.

    No ... 10,000 is the limit ...
    why not store each folder (from your hd) as a project and put those within blue folders ...
    this way, clicking on a higher level folder will show all contents of all projects within it ...

  • IMovie '11 Maximum Project Size

    Is there a maximum project size for iMovie '11?  I am trying to publish to iTunes for viewing on Apple TV and my total project time is 2:27.

    I have never heard of an official maximum, but that is a very large project for iMovie. iMovie is designed for consumer level videos. If you are doing feature length movies, I would recommend Final Cut Pro X.
    The reason is that iMovie renders the movie all in one pass. All your footage, titles, music, transitions, etc. gets done all at once.
    In Final Cut Pro, it will render individual parts as you go, so you can make a much longer movie.

  • IMovie11 maximum project size

    Does anyone know what the maximum file size is for an iMovie11 project?  I have one that is over 2 hours and I can't publish it to iTunes.  I cut it in half and it still didn't work, so I'd like to see if someone can shorten my learning curve and just tell me what time limit it can not exceed.
    Thanks

    No ... 10,000 is the limit ...
    why not store each folder (from your hd) as a project and put those within blue folders ...
    this way, clicking on a higher level folder will show all contents of all projects within it ...

  • Recommended maximum project size?

    I'm working on a 7 hour documentary (ProResHQ 720 25p; sRGB tiffs; FCP7; OS 10.5.8). I have 7 sequences, each an hour long. The project is 150MB--is that too big? I'm encountering beach balling in one sequence and am working to isolate what might be causing it, but I just wanted to know if I need to slim the project size down further also?
    Cheers

    The project is 150MB--is that too big
    I have had bigger project files
    I'm encountering beach balling in one sequence and am working to isolate what might be causing it,
    Lots of still images in there? Increase the amount of memory for the stills cache.

  • Final Cut 5 Project Size Limit...?

    I have heard that in previous versions of Final Cut (3 or 4)... had a unspoken physical project size limit...? Approx. 14 MB. Can anyone confirm this isn't the case in the new Final Cut 5 Studio?

    Sorry... just to re-clarify
    I have heard that in previous versions of Final Cut (3 or 4)... had a unspoken physical project size limit...? Approx. 14 MB. Can anyone confirm this isn't the case in the new Final Cut 5 Studio? Is there a maximum project size (NOT MEDIA) just the actual Final Cut Project.
    Cheers...

  • Is there a maximum project file size?

    I am currently working on a project and the latest project file version I saved had about 922 KB - Premiere wouldn't want to open that again - it keeps crashing when I try to open it
    Then I opened up a new project - imported just that sequence I was working on and suddenly it works again with a project file size of 238 KB
    I have no idea what the reason for those crashes might be so I was wondering if there is such thing as a maximum project file size premiere can handle?

    Welcome to our community
    There really shouldn't be any load limitations other than those imposed by the Captivate files themselves. My guess is that you plan on using WebHelp, no? And if you are, the Captivate demos will be loaded as needed from the server. So the only lag you will see is the delay for what it takes for the server to serve up the demo itself.
    Hopefully this answers your question. If not, post back and we will take another stab at it.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • The initial heap size must be less than or equal to the maximum heap size.

    All,
    Please help!!
    I have tested my Application Client Project in WSAD on my pc and it works fine.
    I have 1gb RAM on my pc. When I deploy the same app on another xp pc(same as mine but 512mb RAM) I get a heap size error. Here is the exact error:
    Incompatible initial and maximum heap sizes specified:
    initial size: 268435456 bytes, maximum heap size: 267380736 bytes
    The initial heap size must be less than or equal to the maximum heap size.
    The default initial and maximum heap sizes are 4194304 and 267380736 bytes.
    Usage: java [-options] class [args...]
    (to execute a class)
    or java -jar [-options] jarfile [args...]
    (to execute a jar file)
    where options include:
    -cp -classpath <directories and zip/jar files separated by ;>
    set search path for application classes and resources
    -D<name>=<value>
    set a system property
    -verbose[:class|gc|jni]
    enable verbose output
    -version print product version
    -showversion print product version and continue
    -? -help print this help message
    -X print help on non-standard options
    Could not create the Java virtual machine.
    Press any key to continue . . .
    Here is the batch file that runs my app:
    @echo off
    SET appClientEar=C:\corp\apps\mts\jars\MTSClientEAR.ear
    set JVM_ARGS=-Xms256M -Xmx256M
    set CLIENT_PROPS=C:\corp\apps\mts\jars\medicalclient.properties
    set APP_ARGS=
    call C:\bnsf\IBM\WebSphere\AppClient\bin\launchClientBNSF.bat "%JVM_ARGS%" %appClientEar% "-CCpropfile=%CLIENT_PROPS%" %APP_ARGS%
    @pause
    I have changed the value of Xms and Xmx of JVM_ARGS to different size but I sitll get error. Anyone knows what the problem is. Thanks..

    Don't know why, but the "maximum heap size: 267380736 bytes" value is just slightly less than 256*1024*1024, wheras the reported initial size is equal to that.
    Try setting the initial value to 255MB.

  • Maximum File Size on Import?

    Hello all, been a ghost reader here but this is my first question (love the forums, btw, super helpful).
    I've been editing a feature film on Premiere Pro. We are nearing the end and I received a DPX sequence back from coloring. Upon importing into Premiere (Intermediate Media Timebase set to the appropriate framerate), the importer hangs up. If I click on anything, the program crashes.
    Here are my questions:
    Is a 2TB DPX sequence a "normal" size for any project? This seems insanely large to me, but this is also my first feature so I could just be ignorant.
    If 2TB is normal, is there a maximum file size Premiere can import?If not, should my system be able to handle a 2TB file?
    The 2TB file is on an external drive, connected via USB3. Potential to connect via eSATA.
    System Specs:
    3770k CPU
    SSD for OS (256GB)
    External Raid 10 - 6TB
    32gb RAM
    GTX 580 GPU
    All help is greatly appreciated!

    Thanks for the reply, Jim.
    Just to clarify, a file this size (or sequence of files) is common? But generally the only way to handle them is with a RAID 3 setup?
    My next question would be, isn't there a lossless format the color people could give me that isn't 2TB? The file I gave them was just over 800GB so it seems really unnecessary for it to be this large.

  • Maximum file size for export into MP4?

    Hello,
    I am not able to export 2 hour HD video into standard MP4 file. It seems that reaching 100% export algorithm gets into loop. I was waiting for hours and still had seen progress at exactly 100% with final file size on hard disk to be 0 bytes. I am using CS5 on MAC OS X. I had to split my timeline to 2 parts and to export them separately (which is embarrasing). Is there something like maximum file size for export? I guess that 2h video would have about 25-35GB.
    Thank you
    jiri

    You are right.
    So I am running AP Pro 5.0.4, Adobe Media Encoder 5.0.1.0 (64bit). Operating system Mac OS X ver 10.7.3. All applications are up to date.
    MacBook Pro Intel i5 2.53GB, 8GB RAM, nVidia GT 330M 256 MB, 500GB HDD
    Video is 1920x1080 (AVCHD) 25fps in a .MTS container  (major part of timeline), 1280x720 30fps in .MOV container (2mins), Still images 4000x3000 in .JPG
    No error message is generated during export - everything finishes without any problem...just file created has 0 byte size (as described above).
    This is my largest video project (1h 54min) I dont have any other problem with other projects.
    I dont run any other special software, at the moment of export all usual applications are closed so that MacBook "power" can go to Media Encoder. No codecs installed, using VLC Player or Quick Time.
    Attached please find printscreen from Export settings (AP Pro). Writing this ppost I tried to export only the first 4mins from timeline where all kind of media is used...and it was OK.
    As a next step I will try to export (same settings) 1h 30mins as I still believe problem comes with length of video exported.
    Let me know your opinion

  • Maximum file size of 2 GB exceeded please choose a shorter bounce time

    I have done a thorough search online (w/google) trying several combinations of words but I seem to be the only person on the planet with this error. I guess I will try to remake the project but I don't think it will fix the problem. I also will update my OS to 10.4.10, anyways here is the the error message.
    "Maximum file size of 2 GB exceeded please choose a shorter bounce time"
    I just bought and installed iLife 08 and the 8.1 update for Garageband. I have a 3 hr and 50 track on the time line and I have added chapter marks with 16k pics. The original combined track size (wav files) did exceed 2GB but I edited the files in itunes (to mono wav files) and swapped in the new files so that the max file size should only be 1.5GB. I still get the error message above when I try to export the podcast to disk using AAC w/Mono Podcast setting. Your help is appreciated.
    Message was edited by: Thad

    I am now the third person in the world to get this error message, except my GB project is a mere 1 hour and 45 minutes long. I've outputted longer projects before and never got this error before. It's a new one to me, and frustrating. How exactly am I supposed to choose a "shorter bounce time" if there is no explanation anywhere in Appleworld of what a bounce time is or how to set it shorter?
    Again, I'm not doing anything different with this project than others that shared successfully, and the dialog box estimates my outputted file size to be approx. 100 MB.
    Can anybody help me get through this error blockage? Please?

  • Maximum file size of 2,0 Gb exceeded

    Searched all over the place and found one thread with no solutions, so I´ll try again..
    I have a project with two mono recordings, each aiff and 530 mb big. Thats 2 hours and 24 minutes. When I try to bounce this in logic 8 (to mp3), I get the message "maximum file size of 2,0 Gb exceeded - please choose a shorter bounce time". ??? If anyone knows how to get around this, pleeaase let me know.
    I imported the aiff files to garageband, and garageband had no trouble bouncing it to mp3, so if garageband is able to bounce it, surely logic should be!? The reason I need to bounce it from logic is because of the editing features there, so doesn´t really help that garageband is able to bounce it....also tried importing the mp3 to logic and then bounce, but same problem occured. I´ve also tried turning down the quality to lowest, but doesn´t help. Please help!

    Just some thoughts on this...
    If the OP is saving to a Mac formatted drive it's not a problem with creating a file on the drive. Might try saving to different location.
    It's possible this may is an internal error from Logic and. It probably has little to do with the actual file size as much as it does with the overall length of time of the bounce.
    In other words... if Logic sees a certain length of time for a bounce, no matter the file type, it thinks the bounced file will exceed the 2GB file limit, which is leftover programming from earlier version of Mac & PC Logic when both operating systems imposed a 2GB file size restriction.
    pancenter-

  • Maximum file size for Adobe air for Androind and iOS compiled apps

    Hi All
    I am working on a project which has a few videos which I need to bundle into my mobile app for an Ipad app I am creating using Adobe Air for iOS. My question is simple is there a maximum file size limit on apps compiled using Adobe air for iOS? And if so what is it? Any help would be great.
    regards Mike

    Hi.  Im not a 100% sure this is correct.  I am able to make a large .IPA file (200+Mb) and it will go onto my iPad 1, but it does not work - Just quicts after a few secs.  If I run the same IPA on my iPad 2 it works.
    When I take out some of the assets so its a smalelr size then it does run on the iPad.

  • Maximum file size for CV in E-recruitment

    hi, my name is chandra. i would like to know ' how we can restrict maximum file size of CV' in the E-recruitment module?
    By the i am working on E-recruitment support project at the moment.
    can some one reply me quickly?
    thanks
    regards
    chandra

    Hi Phani,
    How r u doing ? thanks for the answer.
    can you tell me, how we can
    1. make the CV field mandatory for candidates? can we fix the system so that it display error message, if the candidate don't attach the CV.
    2. how we can set system to show display error message, if the CV size is more then the allotted?
    Thanks
    Regards
    chandra

  • What is the maximum file size allowed by Yosemite's Archive Utility?

    I've seen radically different answers to this question, ranging from ".zip files have a 4GB size limit" to "no limit other than the OS maximum file size". It's been very difficult to find current info on this.
    I have lots of large folders full of recording projects --- I'm talking up to 45GB or so --- and I've been experimenting with different methods of zipping them in preparation for cloud backup. Several applications have been willing to zip my enormous folders into archives, but then choke when unzipping them, telling me that the files cannot be unzipped or are corrupted. Using the "Compress" shortcut in the finder has so far yielded the best results, keeping all necessary resource forks, etc., and unzipping properly, even when other apps have insisted the files are corrupted. However, I'm afraid to continue with this procedure until I can get a straight answer on this issue: have I just been lucky so far? IS there an actual size limit?
    ...It only seems to work when I both zip and unzip with the Archive Utility. Other archiving apps will either render the included projects unreadable by my recording software when zipping (I suspect because of alteration or stripping of resource forks), or will refuse to read the giant .zip archives generated by Archive Utility.
    I've set up the Archive Utility to produce .zip files, as I feel these are the most likely to be recognized by a variety of cloud storage services.ny
    ...Any guidance would be greatly appreciated!

    Hi,
    The 1,048,576 rows & 16,384 columns is the
    workbook size limitation in Excel 2013. Thus, I recommend we try the Mr. Bernie's suggestions to import the large CSV file.
    1. Use VBA to read the file line by line and split/examine the import file in sections. If you have further question about the VBA, please post your question to the MSDN forum for Excel
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
    2. Use Excel 2013 add-ins. Power Pivot and Power Query. For more detailed information, please see the below articles: 
    http://social.technet.microsoft.com/Forums/en-US/9243a533-4575-4fd6-b93a-4b95d21d9b10/table-with-more-than-1-048-576-rows-in-power-query-excel-2013?fo
    http://www.microsofttrends.com/2014/02/09/how-much-data-can-powerpivot-really-manage-how-about-122-million-records/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Thanks
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

Maybe you are looking for