Maximum RAM for a Macbook Pro early 2011 15 inch?

What is the maximam amount of RAM for a MAcbook PRo Early 2011 15 inch?
I have 8GB now, but I wanted to go up to 16GB. SOme have said not possible, others maybe.??

You can check for yourself
OWC  your other best bet  http://eshop.macsales.com/shop/apple/memory/

Similar Messages

  • Which model of memory upgrade should I get for my MacBook Pro early 2011 model? I now have 2 - 2GB modules.

    Which model of memory upgrade should I get for my MacBook Pro early 2011 model? I now have 2 - 2GB modules.

    Installing RAM in a 2011-2012 MacBook Pro
    There is really only one way to install RAM into a 2011-2012 MacBook Pro and while there are hundreds of DIY videos online, I just like this one, found on YouTube, by “macmixing”.
    Note that there is a difference in the RAM that should be used in 2011 and 2012 models.
    2011 models must use:
    •204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    And 2012 models must use:
    •204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
    So here's the video:
    Remember that the 13", 15" and 17" 2011 models (early or late) and the 13" and 15" mid-2012 non-Retina models can handle 4GB, 8GB or (unofficially, but, believe me, it works) 16GB of RAM. There are, in my opinion, only two 100% Mac-compatible vendors out there: Crucial and OWC. I really can't recommend any other brands, even though it may work, as these are the only brands that I've personally used in quite a while. Also remember to stay away from any RAM that is a “value” brand - Macs are picky about RAM and often these value RAM modules just don’t work very well.
    Good luck,
    Clinton

  • Will Windows 7 Pro run with 16GB of Ram in Macbook Pro Early 2011 13-inch?

    Will Windows 7 Pro run with 16GB of Ram in Macbook Pro Early 2011 13-inch?, Does the brand of the Ram matter ?
    I installed Crucial 16 gb and the Mac runs just fine but Windows won't start. It gets to the login screen then it turns white.

    I decided to make another try today after some reading and googling the internet.
    I started windows with my old 4GB memory and changed the bootconfiguration with msconfig. I typed manually in max memory tp 16384 MB and saved the settings. Then I turned it off and inserted the 16GB ram again. Then it started really but when looking at the properties of my computer it says 16 GB installed but I can only use 2,16GB. So I opened msconfig again and changed the settings once more and restarted. Now it says 16GB installed but I can use 14,2GB so I guess it is ok now for some strange reason. I suppose the lost 1,8GB is for the system ?? Do I dare to turn it off again :-) what will it say next time ?
    I am so happy and greatful for all your help, I really really appreciate it and I hope my solution will come to use for someone else with same problem.
    Thank You all :-)

  • What is the price of macbook pro early 2011 15 inch 2.0ghz

    Just need to find out the price difference,if any, between early 2011 macbook pro 2.0ghz and late 2011 2.2 ghz in Singapore currency. Thanks:)

    There was no price increase from the early to the late 2011 MBPs.
    Tim Cook has not called me to let me know when the new MBPs will be released.  When he does, I promise I will let you know.
    Seriously, Apple never releases such information until they actually do so.  That is their corporate policy.  Anything you see on other websites are rumors and nothing more.
    Ciao.

  • My Macbook Pro early 2011 17 inch runs extremely slow

    Many times colored waiting balls
    Often characters appearing much later on screen after keyboard hits.
    Before replacement of my HD by ssd and upgrading memory from 4 GB to 8 GB, I should like to exclude various causes for the extremely slow running of my MBP.
    Greetings, Willem (NL).

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, andIdle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • What is the maximum RAM for 2008 MacBook pro

    I've seen some here say they have 8gb. Manual says 4 is max. What is the correct number?

    You're welcome.
    My late 08 Uni also states 4GB Max but been running 8GB for a year now.
    Same with my 1 month old late 2011.  Specs says 8GB Max.  Been running it with 16GB the day I bought it.
    I have Crucial installed in both my Macbooks.
    If your MB works for you, then just use it with the RAM upgrade so it can last you for awhile.  You'll see a difference in speed.
    Another thing to check is your hard drive.  If it's almost full, delete some files you're not using and clear your cache memory once in a while.
    An almost full hard drive also slows down your MB.

  • How much RAM can my Macbook Pro (early 2011) actually hold?

    I currently only have 2x2 RAM in my Mac, but I've been reading I can put up to 16GB... Is this true?
    I want to upgrade to 16, but I'm unsure if my system will actually accept it or not, which is why I'm here...
    I've been reading on Apples site that it can only hold 2x4, and on other sites it can hold up to 2x8, which one is correct...?
    Thanks guys.
    (Bought in February 2011. 2.3GHz i5, 320GB SATA Disk.)

    16GB will be recognized.
    http://www.crucial.com/store/drammemory.aspx

  • Whats the maximum RAM for my MacBook Pro?

    Thanks to any and all.
    MT3

    Sorry, I thought i included that info.
    From what i found online, it looks as if 4GB is the max. However i can't figure out if thats per slot, or if I can put 2GB in each available slot.
    I currently have 1GB SDRAM per slot.

  • Upgrading ram on macbook pro Early 2011

    I have a 13in macbook pro early 2011 and need to upgrade my ram from 4gb (2gbx2) to 8gb (4gbx2). I have been looking online and found a lot of bad reviews for recommend brands and wanted to know if anyone had any suggestions.

    AriMack13,
    RAM from Crucial and OWC have good reputations with Macs. I’ve used OWC RAM myself, which comes with a lifetime advanced replacement warranty.

  • Macbook pro (early 2011 MacBookPro8,1) maximum memory

    I have 13" macbook pro (early 2011 MacBookPro8,1) and I saw that the max memory is 8GB.
    However, I saw some site selling upgrade to 16GB to my model.
    My question - is it possible to perform upgrade to 16GB like those site suggested, or only 8GB ?

    You can run 16GB's of RAM in your computer, no problems.
    1333MHz DDR3 SO-DIMM PC10600 204 Pin

  • Macbook Pro Early 2011 having issues

    Hi all
    I hope this message finds you all well.
    Sorry that my first post is one begging for help but with a gig 3 weeks away i am bricking it due to the fact that my macbook pro, early 2011 has been playing up of late. It first started having problems when the L shift key became stuck, not physically but after some investigation on here I used Karabiner software to ascertain the issue and disable the key.  However since then the computer hasnt run properly at all.
    I have tried disk repair and so forth, also run Avast virus check but the issues still persist.
    I run Traktor DJ software and for no reason the macbook has started glitching, spinning wheel of doom comes and everything slows down. I can't run simultaneous programmes and certainly can't run my Arkaos Grand VJ software at all which isn't good when we have a big gig in 3 weeks time.
    I have run the Etrecheck as shown below but I dont know what to make of it?!
    Can someone please give me some advice as I am stuck and cant rely on the laptop for the gig which will throw a real spanner in the works.
    Problem description:
    Runs slow, spinning wheel frequently, cannot run arkaos software, tractor software glitches regularly, L shift is stuck on (presently disabled using Karabiner software
    EtreCheck version: 2.0.4 (89)
    Report generated 16 October 2014 14:01:30 BST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6490M - VRAM: 256 MB
    System Software: ℹ️
      OS X 10.9.4 (13E28) - Uptime: 9 days 1:39:24
    Disk Information: ℹ️
      ST500LM012 HN-M500MBB disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (104.69 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      JMicron Samsung S2 Portable 1 TB
      S.M.A.R.T. Status: Verified
      J-Unit (disk2s1) /Volumes/J-Unit : 1 TB (162.07 GB free)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Karabiner.app
      [loaded] org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
      /Library/Parallels/Parallels Service.app
      [not loaded] com.parallels.kext.prl_hid_hook (7.0 15095.768120) Support
      [not loaded] com.parallels.kext.prl_hypervisor (7.0 15095.768120) Support
      [not loaded] com.parallels.kext.prl_netbridge (7.0 15095.768120) Support
      [not loaded] com.parallels.kext.prl_usb_connect (7.0 15095.768120) Support
      [not loaded] com.parallels.kext.prl_vnic (7.0 15095.768120) Support
      /System/Library/Extensions
      [not loaded] com.caiaq.driver.NIUSBAudio2DJDriver (2.4.23) Support
      [not loaded] com.caiaq.driver.NIUSBAudio4DJDriver (2.4.23) Support
      [not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) Support
      [not loaded] com.caiaq.driver.NIUSBTraktorAudio2Driver (2.4.23) Support
      [loaded] com.caiaq.driver.NIUSBTraktorKontrolS4Driver (2.4.23) Support
      [not loaded] com.caiaq.driver.NIUSBTraktorKontrolX1Driver (2.4.21) Support
      [not loaded] com.native-instruments.driver.NIUSBDeviceHelper (1.0.8) Support
      [loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.avast.userinit.plist Support
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [invalid?] com.parallels.desktop.launch.plist Support
      [loaded] com.parallels.DesktopControlAgent.plist Support
      [running] com.parallels.vm.prl_pcproxy.plist Support
      [running] com.rim.BBAlbumArtCacher.plist Support
      [running] com.rim.BBLaunchAgent.plist Support
      [loaded] org.gpgtools.gpgmail.enable-bundles.plist Support
      [loaded] org.gpgtools.gpgmail.patch-uuid-user.plist Support
      [running] org.gpgtools.Libmacgpg.xpc.plist Support
      [loaded] org.gpgtools.macgpg2.fix.plist Support
      [running] org.gpgtools.macgpg2.shutdown-gpg-agent.plist Support
      [loaded] org.gpgtools.macgpg2.updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.parallels.desktop.launchdaemon.plist Support
      [running] com.rim.BBDaemon.plist Support
      [loaded] org.gpgtools.gpgmail.patch-uuid.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [invalid?] com.avast.home.userinit.plist Support
      [loaded] com.divx.agent.postinstall.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [not loaded] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      smcFanControl Application (/Applications/smcFanControl.app)
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Application (/Applications/Dropbox.app)
      Spotify UNKNOWN (missing value)
      TorBrowser UNKNOWN (missing value)
      Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
      Wondershare Helper Compact Application (/Users/[redacted]/Library/Application Support/Helper/Wondershare Helper Compact.app)
      SE Media Sync Helper ApplicationHidden (/Applications/Sony Ericsson Media Sync.app/Contents/Resources/SE Media Sync Helper.app)
      Karabiner Application (/Applications/Karabiner.app)
      NIHardwareAgent ApplicationHidden (/Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
      OVSHelper: Version: 1.1 Support
      DivXBrowserPlugin: Version: 2.2 Support
      Default Browser: Version: 537 - SDK 10.9
      SharePointBrowserPlugin: Version: 14.3.5 - SDK 10.6 Support
      Scorch: Version: 6.2.0 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User Internet Plug-ins: ℹ️
      Picasa: Version: 1.0 - SDK 10.6 Support
    Safari Extensions: ℹ️
      AdBlock
      wrc
    3rd Party Preference Panes: ℹ️
      DivX  Support
      Flash Player  Support
      GPGPreferences  Support
      Native Instruments USB Audio  Support
      Perian  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 499.25 GB Disk used: 394.56 GB
      Destinations:
      Stampatron II [Local]
      Total size: 499.76 GB
      Total number of backups: 8
      Oldest backup: 2014-10-08 21:14:51 +0000
      Last backup: 2014-10-09 04:18:39 +0000
      Size of backup disk: Too small
      Backup size 499.76 GB < (Disk used 394.56 GB X 3)
      Backup [Local]
      Total size: 499.94 GB
      Total number of backups: 1
      Oldest backup: 2014-09-20 07:40:57 +0000
      Last backup: 2014-09-20 07:40:57 +0000
      Size of backup disk: Too small
      Backup size 499.94 GB < (Disk used 394.56 GB X 3)
    Top Processes by CPU: ℹ️
          5% WindowServer
          3% bluetoothaudiod
          2% com.avast.daemon
          1% iTunes
          1% Safari
    Top Processes by Memory: ℹ️
      205 MB Safari
      106 MB com.apple.WebKit.WebContent
      90 MB com.avast.daemon
      69 MB Finder
      43 MB iTunes
    Virtual Memory Information: ℹ️
      34 MB Free RAM
      1.03 GB Active RAM
      1.01 GB Inactive RAM
      1.27 GB Wired RAM
      20.97 GB Page-ins
      2.19 GB Page-outs

    You  have Avast installed which could be causing some problems for your Mac's operation. Use the Avast uninstaller and get rid of it.
    Boot into Recovery mode by holding down the Command and R keys together and use Disk Utility there to Repair your hard drive and repair disk permissions.
    Hope that helps.
    As for the shift key, you should take the computer to the Apple Genius Bar and have them look at it.

  • Macbook pro (early 2011) won't boot after sleep. Black screen with chime

    I put my macbook pro early 2011 (Quad, 8 Gb RAM, 2 x SSD-disks, external 27" LED-screen) into sleep mode a couple of days ago. Everything was fine then.
    However, the morning after it wouldn't wake up - this is the bootup process:
    - Black screen
    - Chime
    - Still black screen, nothing happens.
    So I've tried resetting NVRAM, SMC etc - no luck. Even tried the "Powerbutton" + "S" + Enter but to no avail.So I immediately began dd:ing my SSD-disk before trying anything else, figured it might be some preboot-corruption of some sort since I'm running FileVault2 with full AES-encryption.
    Now, the problem (after some troubleshooting) doesn't seem to be disk-oriented. Remember the black screen? I've tried pulling the SATA-cables one by one on the motherboard of the Macbook pro and discovered that when I pulled the cable which reaches over the optical device (just above the SATA-cable for the optical device) then I get a white screen and I'm able to get as far as boot-option, or even disk repair (if I run my SSD-disk over USB and without any cables (three of them) attacked to the motherboard).
    So since nothing works when I have disks connected or that third cable (some kind of logic board bridge? Reaches through the screen over to the other side of the mother board).
    Also worth noting is that I was running out of free disk-space on my system disk. The disk is 250 Gb and free space was about 5-10 Gb (less than 5%). I also make the macbook pro dump contents of memory to disk (since my disk is encrypted it resides safely there).
    So, my fear is that Apple hasn't used A-grade controllers for the disk drives (I've had drive corruption before, a Crucial 6 GB/s drive trashed less than a week before a presentation) and doesn't handle "unexpected events" nor signal/noise ratio very well. Maybe free space on disk was less than the 8 Gb needed to dump RAM (shouldn't have needed the full 8 Gb though) and this caused some kind of panic overwrite which trashed the controller?
    Anyways, I've attached an image of the motherboard and I am wondering - what does the top cable which reaches over the optical drive do? Is it connected to the logic-board?

    sspott wrote:
    ** The volume Macintosh HD could not be repaired.
    Looks to me like a fatal error on the hard disk. IMHO, the only solution is to boot from an external device, reformat the hard drive, and restore from backup. If you don't have a backup, you're in trouble. Boot from the external device, try to mount the int'l drive, and, if successful, back up as much as possible. Also, try running Disk Utility—it may be possible to fix it while booted from a different device, thought I wouldn't bank on it. At any rate, make sure to run an AHT afterwards, to check for possible hardware issues with the drive.
    If the machine is still covered by AppleCare, take it to the store by all means. But they won't try to recover anything from the int'l drive, just check it, erase it if they don't find hardware issues, and re-install a fresh copy of the OS.
    That's why you should always have at least 1 up-to-date backup (2, with one kept off-site, is better).

  • Macbook Pro early-2011 crashing/locking-up

    Hello,
    My MacBook Pro (early-2011 model 15") has been locking up and crashing lately. It was recently upgraded to Mavericks OSX.This has happened only a handful of randomn times over the past two months. I don't think it has to do with the OS version because it did this a couple months ago as stated when I had Lion, and also ML. However, in the past 24 hours i have locked up around 5 times and crashed at 3 times.  I've attached the crash report below from the latest crash this morning. I use one usb port to connect to a Dell monitor using DisplayLink adapter, and the other usb port goes to a 4-port usb hub that has my wired keyboard, mouse, and phones that I test with plugged into. The mini displayport goes to another Dell monitor. Can anyone help me determine the issue? Does it look to you like the RAM has been corrupted and needs replacing perhaps? Or maybe it is this usb hub causing memory crashes from having so much stuff plugged into it? Log below:
    Anonymous UUID:       A06D9E0B-752F-521A-C64F-89E5D1C93276
    Fri Nov  1 09:51:46 2013
    Machine-check capabilities 0x0000000000000c09:
    family: 6 model: 42 stepping: 7 microcode: 40
    Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz
    9 error-reporting banks
    threshold-based error status present
    extended corrected memory error handling present
    Processor 0: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
      MCA error code:            0x117a
      Model specific error code: 0x0001
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC7_ADDR(0x41e): 0x000000004dc98080
    IA32_MC7_MISC(0x41f): 0x000000b72e020086
    Package 0 logged:
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 1: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
      MCA error code:            0x117a
      Model specific error code: 0x0001
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC7_ADDR(0x41e): 0x000000004dc98080
    IA32_MC7_MISC(0x41f): 0x000000b72e020086
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 2: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
      MCA error code:            0x117a
      Model specific error code: 0x0001
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC7_ADDR(0x41e): 0x000000004dc98080
    IA32_MC7_MISC(0x41f): 0x000000b72e020086
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 3: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
      MCA error code:            0x117a
      Model specific error code: 0x0001
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC7_ADDR(0x41e): 0x000000004dc98080
    IA32_MC7_MISC(0x41f): 0x000000b72e020086
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 4: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
      MCA error code:            0x117a
      Model specific error code: 0x0001
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC7_ADDR(0x41e): 0x000000004dc98080
    IA32_MC7_MISC(0x41f): 0x000000b72e020086
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 5: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
      MCA error code:            0x117a
      Model specific error code: 0x0001
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC7_ADDR(0x41e): 0x000000004dc98080
    IA32_MC7_MISC(0x41f): 0x000000b72e020086
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 6: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
      MCA error code:            0x117a
      Model specific error code: 0x0001
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC7_ADDR(0x41e): 0x000000004dc98080
    IA32_MC7_MISC(0x41f): 0x000000b72e020086
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 7: machine-check status 0x000
    Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 1.69f4
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
    Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: KINGSTON SV300S37A240G, 240.06 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: Hub
    USB Device: Plugable UGA-2K-A
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: USB2.0 Hub
    USB Device: Hub
    USB Device: G500
    USB Device: Multimedia keyboard
    USB Device: Hub
    USB Device: XT912
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

    Hi Will-H,
    Thanks for using Apple Support Communities.  It sounds like more isolation might be needed to rule some things out.  I would recommend this article:
    OS X Mavericks: If an app freezes or quits unexpectedly
    http://support.apple.com/kb/PH13975
    Disconnect any peripheral devices you just connected (for example, a printer). They may not be compatible with your version of OS X.
    Uninstall any app plug-ins or enhancements from other manufacturers.If you recently updated the app or OS X, a plug-in or enhancement you installed may no longer be compatible.
    Use Apple Diagnostics or Apple Hardware Test. These tools can tell you if hardware you installed, such as additional memory, is incompatible, improperly installed, or defective.Use Apple Diagnostics or Apple Hardware Test
    Restart your Mac in safe mode.Start up in safe mode
    Use Disk Utility to repair your computer’s internal disk.
    Cheers,
    - Ari

  • Will a Macbook pro early 2011 installation disc work on a 2007 or 2008 Macbook pro 15

    My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button. He doesnt know what version it is and I forgot to write down the model number of it(Ill update May 16 at 10am PST). I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up. He can not find his installation disc that came with the computer. I have mine but its for Model # A1278 I think its snow leopard. Will the installation disc and application disc run successfully on my collegue's 2007 or 2008 Macbook pro?
    I apologize if there's a similar thread out there, I couldnt find one. -

    Will a MacBook Pro Early 2011 installation disc work on a 2007 or 2008 MacBook Pro 15?
    No it will not.
    Machine specific gray/back disks are for one model of Mac only as they only contain hardware drivers for that model, not previous ones.
    The 10.6.3 white Snow Leopard retail disk will work and it's available from Apple online for a small charge.
    My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button.
    I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up.
    This is indicative of a problem with the boot drive and the file structure retaining data on the drive.
    The progress bar progressing and stopping means the fsck drive repair is failing, likley the drive incurred head shock damage at that point.
    The boot drive itself is likely fine and the problem can be resolved but the disks are going to be required if it's running Snow Leopard.
    First get the disks, then attempt Disk Utility > Repair Disk and check the SMART status if the drive is still good.
    If there is no backup of data, get that off the machine using a external boot drive.
    To fix that problem of a bad sectors, unfortutly the entire drive will need to be Zero Erased (security option > zero all data) using Disk Uility while c or option/alt key booted from the 10.6 disks (using a wired or built in keyboard), it's the only way.
    This means all programs, files (remaining) and OS X will be removed in the process. You could replace the drive also.
    Step by Step to fix your Mac
    Create a data recovery/undelete external boot drive
    How to erase and install Snow Leopard 10.6
    Install/upgrade RAM or storage drive in Mac's
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • Why is my MacBook Pro (Early 2011) so slow!!!

    My Macbook Pro (Early 2011) with intel dual - core i7 4 gb RAM so slow. It came with Snow Leaopord and upgraded it to Lion, then uprgaded it to Mountain Lion. Whenever I run one of the Adobe CS5 apps it gets reeeeaaaaaaalllllllyyyy slow. It used to not get slow at all. Also when I have FCPX open it gets really slow. I used to be able to run Photoshop and Safari at the same time and now it is really slugish and slow. Is there anthing I can do to  clean it up and make t run faster?
    Thanks

    Follow Sig's suggeston in adding more RAM.
    Photoshop and FCP are RAM dependent applications.  With 4GB of RAM, open activity monitor and see your page outs and swap used. 
    I have 16GB installed - page outs - 0. swap used - 0.  see image below.
    8GB should be a perfect upgrade for what you're using it for.
    Good luck.

Maybe you are looking for

  • Toshiba Front Operation Panel/Illumination Keys not working

    I am unable to toggle wireless on/off, mute/unmute, play/pause using Front operation panel LED keys on my Toshiba Qosmio F60. Currently I need to enable WiFi/Bluetooth from within Windows for it to work. Fn+F8 toggle works as soft block/unblock only

  • Restrict access for Vendor Master Data

    Hi all. Our company structure is like below: Single instance, just one mandant. Company codes like 1001, 3001, 6002, 6006, etc... over the world. At some companies just the central administration can create vendor for the companies using the transact

  • Office 365 subscription - 60 minutes included

    I purchased a product from Microsoft and i was given free 60 minutes of skype credit to call which is already active but i really dont know how to use it because whenever i dial a number it kept telling me i dont have credit.

  • MBP shuts down unexpectedly when on battery

    Today my MBP shuts down unexpectedly when on battery. It started at about 50%. I seems to happen if I don't a thing for a short while when I read something or so. I most of the time when using mu MBP have it on the net cord but today I wanted to work

  • Maximum number of control files.

    Hi Sir, I read maximum number of control files we can multiplex is 8, just want to know any specific reason maximum 8 ? I know that if we have mutliplue controlfiles it affect the perfromance because database has to record the status in all control f