Maximum RAM for HP Pavilion All-in-One MS228sc

Since my HP Pavilion All-in-One MS228sc is getting increasingly slow - even after releasing space on the hard-drive I am researching on the possibility for a RAM upgrade.
The Pavillion ins "born" with 2 GB RAM in the slots and 2 GB virtual RAM.
My question if I can subsitute the one or both the RAM blocks with 2GB block. In that way I will get 3 or 4 Physical RAM instead of 2.
I assume that will increase the performance a great deal  
This question was solved.
View Solution.

Hi,
The machine came with 4Gb of RAM, max as shown:
Memory
Component                     Attributes
Memory Installed
4 GB
Maximum allowed
4 GB (2 x 2 GB) (64-bit OS)
4 GB* (2 x 2 GB) (32-bit OS)
*Actual available memory may be less
Speed supported
PC2-6400 MB/sec
Type
200 pin, DDR2 SO-DIMMs
Source:  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01965436
If some how your machine came with only 2Gb of RAM, you can upgrade to 4Gb (max) using PC2-6400 RAM as mentioned above.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • New hard disk for HP Pavilion All-in-One MS228sc

    I need to get af new hard disk drive for my HP Pavilion All-in-One MS228sc. I have great difficulties in getting in touch with HP denmark since my product is out of waranty.
    My questions is if the PC can handle a disk larger than my current on on 500 GB. Further more I am not sure about other potential limits the PC could have ini regards to speed and other parameters on a new disk drive
    This question was solved.
    View Solution.

    As your computer is out of warranty, please purchase a 500GB - 2TB 3.5" SATA2 or 3 hard drive from an online or local retailer. If the new drive is an AF (Advanced Format) drive, you may have issues using the HP Recovery Media you created or purchased.
    If this is the case and you can still read the 25-digit Windows product key on the Microsoft COA affixed to your computer, you can install Windows 7 using this key. Please see "How to Install Windows 7 Without the Disc" for instructions on how to download Windows 7, create the installation media, and install Windows 7 using the 25-digit product key from the Microsoft COA on your computer. This method will not install any HP customizations or value-added software and you will have to manually install all needed drivers.
    Links to Windows 7 SP1 can be found HERE and HERE. (Download the Windows 7)
    Direct link to Windows 7 USB/DVD Download tool. (Use to create the media from the ISO)
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Screen replacement for hp pavilion all-in- one 23 pc

    hi, i have a hp pavilion all-in-one 23 pc and my daughter broke my screen, i was wondering how do you remove the back cover i have looked on the net and can not seem to find any thing to help me and i also have tried to rmove it my self but am scared of breaking it.... Please Help Me!

    Here is a replacement screen:
    http://www.ebay.com/itm/HP-Pavilion-AIO-23-23-b320-Samsung-a-Si-FHD-LED-Matte-Screen-LTM230HT10-A-GL...
    Maybe contact the vendor and see if they have replacement instructions. This is about the third such request I have fielded here and simply cannot find good instructions online. It does look like a very difficult job. 

  • Maximum RAM for HP Pavilion Entertainment PC

    Is there a maximum RAM that can be installed in my PC?  I presently have 4.00 GB RAM.  If I'm able to add 4.00 more, what should I purchase?
    This question was solved.
    View Solution.

    Mrroosky.
    Memory 2 SODIMM slots
    Customer-accessible/upgradable
    PC2-6400, 800-MHz, DDR2
    Dual-channel support
    Supports up to 8192-MB system memory
    ● 8192-MB total system memory (4096 MB × 2, dual-channel)
    ● 6144-MB total system memory (2048 MB × 1 + 4096 MB × 1)
    ● 4096-MB total system memory (2048 MB × 2, dual-channel)
    ● 3072-MB total system memory (2048 MB × 1 + 1024 MB × 1)
    ● 2048-MB total system memory (1024 MB × 2, dual-channel)
    ● 2048-MB total system memory (2048 MB × 1)
    ● 1024-MB total system memory (1024 MB × 1)
    Your manual here.
    http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QFjAA&url=http...
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • HP Pavilion All in One Not Detecting External Monitor

    Hello I have an HP Pavilion All in one 23-g010 running windows 8
    I purchased a VGA to USB adapter so that I could connect my external HP 2009m monitor and it worked just fine. I had to reset my computer and I used System Image Recovery everything else works fine except now when I plug in the adapter and click on Share it says " Nothing Can be Shared From this Desktop" When I look under Screen resolution it just says Generic Non-PnP Monitor and wont allow me to select anything else.  I tried downloading drivers but it just says my computer doesnt meet not meet the minimum system requirements to install the driver. I am at a loss as to what to do, I work at home and dual monitors is a must.
    Thank you for any help

    Did you create the "Windows System Image" before you purchased the USB-to-video adapter??? After preforming the System Image Recovery, did you install the drivers for the USB-to-video adapter??? The drivers for the adapter should have been included with the adapter or are available on a 3rd party website.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • My HP Pavilion All-in-One often shuts down during PC games.

    My HP Pavilion All-in-One is just a year old. It shuts down more and more frequently with PC games like Age of Empires and Age of Titans, and the online game Wizards 101. Can anyone tell me why and what I can do about it? The games were not from original disks and I don't know if that has anything to do with it. Thanks
    This question was solved.
    View Solution.

    Linda, welcome to the forum.
    It sounds like a heat problem to me.  Most laptops and All-in-ones are frankly not meant for gaming.  Also, you could try installing any patches that are available for the games.  This could be part of the problem if not the heat.
    Please let us know if this solves your problem or not.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • My HP Pavilion All-in-One shuts down during certain computer games. Any ideas why?

    My HP Pavilion All-in-One is a year old, and has started shutting down on certain PC games and on one online game, Wizards 101. Can anyone tell me why or what I can do to prevent this? The games were not from original disks, don't know if that has anything to do with it or not. We have uninstalled them, but may buy originals if this would make any difference. Thanks

    Linda, welcome to the forum.
    It sounds like a heat problem to me.  Most laptops and All-in-ones are frankly not meant for gaming.  Also, you could try installing any patches that are available for the games.  This could be part of the problem if not the heat.
    Please let us know if this solves your problem or not.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Can you use Dual Monitors on an HP Pavilion "All-In-One" Desktop?

    Hello,
    Just seeing the words "dual monitors" on the forum makes me realize I have several extra flatscreen monitors sitting around and I always loved them at work. I have an HP Pavilion All-In-One Desktop and is it possible to run dual monitors on an All-In-One desktop and what would I need in the way of accessories (cables, etc.) to be able to do that, if it's possible? Thanks in advance for any help!

    Hi,
    What is your AIO computer ? Many AIO computers do not have video out ports. You can use something like:
       http://www.amazon.com/IOGEAR-External-Video-Interface-GUC2025H/dp/B004OA73PW
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Fan always running on my HP Pavilion All-in-One 200-5000 (model #2MD0400F1W)

    The fan on my HP Pavilion All-in-One 200-5000 (model #2MD0400F1W) seems to be always running (and it's not quiet). I believe I'm running the latest BIOS and I've already checked to make sure the air vents are clear. I'm not running any memory or processor intensive applications. Any suggestions how to reduce how long and frequently the fan seems to be running? Thanks.

    Hello @jmgoldsmith,
    I understand that you are having issues with the fan always running on your HP Pavilion All-In-One 200-5000 Desktop PC. I would be happy to assist you, but first I would encourage you to post your product number for your computer the number you provided is not a product number (example : HP Pavilion All-In-One 200-5000t CTO Desktop PC has a product number of BN997AV). I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Hp pavilion all-in-one green screen problems

    I purchased a brand new 23 inch HP pavilion all-in-one, set it up and used it for 3 or 4 days but kept getting GREEN SCREENS on face book videos and other websites...had to reboot constantly to correct the problem but after a few hours it returns. I phoned the store & they said it was a defective computer, so I packed it all up & returned it to the store & got the EXACT SAME COMPUTER & now I'm having the identical problem, so I phoned HP & a technician did some minor changes, rebooted it thru remote access and said 'there all fixed' but later that day the problem returned AGAIN. I heard this issue is due to INCOMPATIBILITY BETWEEN FLASH & WINDOWS 7/8, so either windows needs to fix it...or HP needs to fix it...PLEASE HELP YOUR CUSTOMERS so we don't have to reboot constantly!

    Hello again @Nordic4U,
    Actually if you restart and the problem goes away temporarily then I suspect that you have a 3rd party application making a change that is causing this issue. I am providing you with an HP Support document: Using Microsoft System Configuration (Windows 8), which will walk you through disabling all non-Microsoft Services and your Startup Items. If the problem goes away at this point then we know you have a 3rd party application causing your issue.
    Now you need to narrow it down till you find the problem. You can do this by enabling 50% of the Services and see if the issue is still fixed. If it is you know it is not one of them and you can continue enabling the Services and Startup Itmes until you indentify what is causing your issue.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Hp pavilion all-in-one wanting to multi-moni​tor

    I have a HP Pavilion All-in-one and am wanting to multi(dual monitor), for webcasting purposes of a co-host show(co-host's in diff locations) was told i would need to dual monitor and "highjack" skype. i would like to have live video of co-host as well as audio. any suggestions..?? ty
    Solved!
    Go to Solution.

    Wouldn't it be easier to use something like this and cheaper http://www.bestbuy.com/site/Tritton+Technologies+-​+SEE2+External+VGA+Video+Adapter/9325241.p?id=1218​...
    Crystal
    Superuser
    Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
    *Remember to mark your questions solved and click the star to give kudos to show your thanks!*
    While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
    My opinions do not in any way shape or form represent Best Buy's Official decisions.

  • Why won't my hp pavilion all in one not play dvds or games?(It does play a game from 2000.)

    Product Name: Hp Pavilion all in one I don't know the product number.
    Operating System: Windows 7 64-bit
    It says insert disc each time
    No upgrades before the issue

    Hi,
    The following procedure will test if your PC can start from a bootable disc in the CD/DVD drive - the advantage of trying this is that it will rule out any possible Windows driver error as the CD/DVD drive is under the control of the Bios when starting the PC.  So if you find that the PC will not boot from the CD or DVD, then it's almost certainly a Hardware fault in the optical drive itself and it will need to be replaced.
    Using another PC to create a Windows 7 Rescue CD and DVD.  Download the ISO from the link below.
    Windows 7 64bit
    You need use an application such as ImgBurn to correctly burn the ISO to a CD and then also burn it to a DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  Once created, insert the CD and then restart the PC and see if it boots from this disc - if it does, let the first screen come up ( this will show repair options etc ) then just remove the CD, insert the DVD and restart the PC again to see if it will also boot from this disc.  If the PC will not boot from the CD, it may just load straight into Windows, in which case, just remove the CD, insert the DVD and restart to see if it will boot from this disc.
    Let me know.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • What is the maximum paper thickness a C6380 all in one printer can use?

    What is the maximum paper thickness a C6380 all in one printer can use? I want to print wedding invitations

    HI,
    Paper thickniss it will print depends on the paper size as well. FInd the paper specs HERE.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Bioshd-8 on pavilion all-in-one

    Hi!  This has not been my week.  My HP Pavilion All-in-One PC kept on freezing and crashing on me lately.  I ran the F9 diagnostic and the hard drive test failed. My HD is a WDC WD6400AAKS 65A7B2 (WD-WCASYC373484). The error code came up with BIOHD-8 and Error:  A Smart test failed on the drive. 
    My PC still boots up, internet works, and other programs seem to work except for a few.  I recently added an HP F4100 printer on it, it prints, but when I went to the printing preferences and clicked on the "services" tab, it froze and had to shut it down.  It rebooted fine but keeps on freezing when I click on that tab as well as in the run backup under the HP support Dashboard.  I removed the printer and added it again--same problem.  I also added a Seagate external drive and it wouldn't do a windows backup (failed).  It does do my backup to the external drive from my backup schedule set up on Norton 360.
    Is the HP support the problem here (have not uninstalled it)?  Or is my HD failing?  When I first got this computer, I had the same problem but it was within the warranty period and HP replaced the hard drive.  I've had this desktop for over a year since HP replaced the original HD.  Is there anyway to repair this error?  Like doing a system recovery?  I made recovery discs for this computer.  Would that fix the problem or would it come back again? 
    If I buy a new hard drive, will I encounter the same problem?  Is it a motherboard problem or a hard drive problem?  Some of the comments I have read suggest either a HD or motherboard problem.  Please help.  Thanks in advance.  This is the only computer I have left as my laptop crashed earlier, hence I started using this desktop.  (Footnote:  the laptop was also an HP Pavilion entertainment laptop dv model-but that's another story).

    Your hard drive is dying, replace it.
    This is a common problem in PCs, not just HP.

  • Maximum RAM for iMac 2006 5.2 17" C2D

    Having followed the discussions on maximum RAM for this model it  appears that 2GB is the maximum possible. I discovered this after purchasing a matching pair of 2GB sticks of RAM :-(
    However, as the iMac would not start with the 2 x 2Gb sticks I tried various combinations 1 x 2Gb & 1 x 1Gb, swapping these between the two slots etc etc until the final combination of 1x 2GB and 1 x 256Mb works. I am tempted to purchase a stick of 512mb to see what happens next but I am intrigued as to why the higher combinations do not work, any thoughts on this are welcome.
    All the memory is DDR2 667MHz but the combination that works has the 2gb at 2rx8 and the 256Mb at 1rx16.
    Spec of machine is : iMac 2006 5.2 17", C2D 1.83ghz, 24x Combodrive, 10.6.8

    I would use 2 x 1GB, as the Intel architecture runs just a little faster with matched memory (around 3%-5%).
    While 2GB + 256MB boots, have you looked to see what the system is showing as available memory?

Maybe you are looking for

  • Report Coupon Page Break?

    Hi guys, My issue is I have a report that contains a fixed header, a vendor line that follows with a list of invoices that will continue until it reaches the last item, and a footer which should be fixed at the bottom of the page similar to the heade

  • Getting error while calling AME api from the page

    Hi, I am calling ame api ame_api2.getallapprovers7 from our custom page.I have written following code- public void getapprovers(String transactionid) String OutError = ""; ArrayList al = new ArrayList(); OADBTransaction trans = getOADBTransaction();

  • Please tell me it's possible to download MP3 to your mobile device.

    Hello, I'm simply trying to offer a downloadable podcast (MP3) through our Saba LMS for computer and mobile device. So far, PC isn't a problem to download, but how can my user download the MP3 using their mobile device? I can only think that it has t

  • V$views not available in PL/SQL scripts why?

    I created a procedure as follows create or replace procedure log_user_count      (pi_directory in varchar2, pi_file_name in varchar2) as      v_file_handle utl_file.file_type;      v_user_count number; begin      execute immediate 'select count(*) fr

  • Datagrid sorting issue

    I have two datagrids. After a form is submitted, datagrid 1 is populated. Clicking on any of the rows will submit to another query and populate datagrid 2. If I have submitted my form and datagrid 1 is populated, and I sort the columns, it will sort