Maximum rows exceed in SmartView

I'm running and MDX query in SmartView and got this mesage. "Maximum numbers of rows [5000] Exceeded". Is this the maximum rows can return in SV? If not, where can i increase this limit?
Thank you.

In EAS, go to the Hyperion Provider Services node.
If you don't have a server underneath it, add one -- it can be the same name as your EAS server (well, usually). In 11x, just add the Provider Name and EAS will add the url.
Navigate within your newly added server, right click on it (this would be the one directly under HPS), and select Edit->Properties.
Then, go to the Settings field, change the Maximum number of rows to whatever, click on Apply, and you should be good to go.
It is documented, somewhere, but I can never remember where.
Regards,
Cameron Lackpour

Similar Messages

Maximum number of rows exceeded

Hi,
I am using Smart View (Hyperion 11.1.2.1) where large data needs to be retrieved. But during retrieval, I am getting error "Essbase Error (1020011) : Maximum number of rows [5000] exceeded". I modified the essbase.properties file as below.
# Properties File used by ANALYTIC PROVIDER SERVICES
# Release version 11.1.2.1.00 - Talleyrand SP1
# Use / for separator.
# Data directory used in JAPI embedded mode
# Specifies location of folder containing domain.db file
# If jvm option -DESS_ES_HOME points to an install directory of HPS, and domain.db
# is located under ESS_ES_HOME/data, this entry need not be present,
# else, specify the location of doamin.db here.
# system.dataDir=
# Specifies values for Essbase Server network connection
# APS will try netConnectRetry times to connect to an Essbase Server.
olap.server.netRetryCount=1200
olap.server.netConnectRetry=3
olap.server.netDelay=1200
olap.server.netSocketTimeOut=1200
# Specifies maximum rows/columns for dataquery grid. 0 value indicates no limit.
service.olap.dataQuery.grid.maxRows=10000
service.olap.dataQuery.grid.maxColumns=255
# Logging Configuration - moved to logging.xml
# Maximum idle time for HPS sessions (in minutes)
system.session.timeout=60
# system.faultTolerance
# retryTime - Maximum number of times to retry
system.faultTolerance.retryTime=10
# monitorInterval - Interval to schedule thread to monitor cluster components.
# duration in seconds
system.cluster.monitorInterval=30
# BEGIN: Smartview specific properties
smartview.system.checkforspecialchars=true
smartview.webservice.autoadd.EssbaseLocalhost.server=true
smartview.webservice.autodeploy.force=false
smartview.webservice.autodeploy.warn=false
smartview.webservice.gzip.compression.disable=false
# END: Smartview specific properties
After doing this, I restarted the service - "Hyperion Provider Services - Web Application". Still I am getting the same error in Smart View.
Please advise if I missed something.
Thanks.
Edited by: user13325223 on 6 Jan, 2012 12:39 PM

I'm having the same error, only I checked my essbase.properties file in the correct location, and it's already set to 99999 rows.
#APS Properties File
#Thu Mar 01 09:31:53 EST 2012
olap.server.netConnectRetry=3
domain.store.file.name=/opt/Apps/Oracle/Middleware/user_projects/epmsystem1/aps/data/domain.db
smartview.webservice.gzip.compression.disable=false
smartview.webservice.autodeploy.force=false
system.session.timeout=60
system.dataDir=/opt/Apps/Oracle/Middleware/user_projects/epmsystem1/aps/data
smartview.webservice.autodeploy.warn=false
smartview.webservice.autoadd.EssbaseLocalhost.server=true
service.olap.dataQuery.grid.maxRows=99999
system.cluster.monitorInterval=30
service.olap.dataQuery.grid.maxColumns=255
smartview.system.checkforspecialchars=true
nativeSecurity.enabledProviders=
system.faultTolerance.retryTime=10
I'm using Excel 2007, and Hyperion 11.1.2.1
Edited by: Sabrina on Mar 1, 2012 10:53 AM

ORA-19921: maximum number of 64 rows exceeded

while trying to connect to the database through rman, I got this error;
Recovery Manager: Release 10.2.0.2.0 - Production on Tue Nov 24 10:59:34 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
ORACLE error from target database:
ORA-19921: maximum number of 64 rows exceeded
connected to target database: <SID> (DBID=XXXXXXXXXX)
RMAN>
This is Oracle 10g running on AIX server.
Can anyone have an idea of resolving this issue.
Regards
Paul

Tellling the OpsTeam to ignore RMAN jobs that return errors is not an ideal solution.
Similar errors continue after upgrading to 12.0.4.2.
So the fix, does not fix all occurrances.
Have found additional information, and you may be able to look at your errors too for more info.
connected to target database: MyTargetDB (DBID=1591642534)
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
ORACLE error from target database:
ORA-19921: maximum number of 128 rows exceeded
SQL> connect system@mytargetdb
Enter password: *******
Connected.
SQL> select count(*) from v$rman_output;
COUNT(*)
32948
SQL> select * from v$rman_output where rownum <2;
SID RECID STAMP SESSION_RECID SESSION_STAMP
OUTPUT
RMAN_STATUS_RECID RMAN_STATUS_STAMP SESSION_KEY
505 1 709915346 186630 709912681
RMAN-06207: WARNING: 1 objects could not be deleted for SBT_TAPE channel(s) due
187039 709915343 186630
SQL> select count(*) from v$rman_output
where OUTPUT like 'RMAN-06207%'
COUNT(*)
3248 <==== only about 10% of the rows have the same RMAN-06207 error
SQL> select * from v$rman_output where SESSION_KEY <> 186630;
no rows selected <=== All rows appear to have SESSION_KEY 186630
I have opened an SR with Oracle Support to find out how to clear out the error mesage entries in v$rman_output.
I will also need to determine why the RMAN deletion of backups placed these (and other) messages into this table.

Require Maximum Rows & Columns to shown in report once generated....

Hello,
My client has a query that when a report is generated through Discoverer via the Oracle Self Service, it displays a limited set of rows and columns. The user has to click on the rows and column link (right above the displayed report) and then enter the values of how many rows or columns to exceed, to which then a whole report is refreshed displaying the desired data.
The query my client has and wants to know is whether there is a possibility that the whole report, including maximum rows and columns, is displayed in one go, rather than clicking and setting up rows and column in every report again and again...??
Thanks!

Hi,
I assume you talk about the discoverer viewer.
In order to accomplish the user desire, the owner of the report should set once the columns and rows number to the max and save it like this.
then every user will get the maximum number of rows (999) and columns.
Tamir

Maximum runtime exceeds while debugging

Hi all
One of my program takes 3hrs for executing usually end users uses back ground jobs
Now i am debugging the above program as some of documents missing in that program.
My problem is while debugging at particular point it giving ABAP dump error saying maximum runtime exceeded.
Is there any way to debug the above program.
I already asked basis guy to increase the runtime setting he unable to do so as this it was a production system.
Is there any other way?

Hi,
It depends on which Statement dump is coming.
If it is coming in SELECT Statement, try to narrow your search in Debugging mode so that Program should go forward.
If it is Coming in any Loop statement..you can go ahead by deleting some of the rows of the Internal Table during runtime.....
But this might not help you a lot.....you actually have to look the code in details and have to follow Best Coding practices....Atleast one of your WP is trying to consume Resources more that the Max Limit set by your BASIS Administrator ...
Please Identify the probelm code and come back.....

Dynamically set maximum row count in Interactive Report

Hi,
Has anyone worked out a way of dynamically setting (e.g. via select list) the maximum row count value for an Interactive Report, taking into account issues with order by when the report is filtered. I'm aware of solutions like this: http://www.talkapex.com/2010/10/apex-reports-no-limit-downloads.html but as far as I can tell this doesn't work when the report is filtered and the IR is rewritten in the background. Data sets then become unreliable because they are reordered.
Thanks,
Mike

Hi Mike,
You can do that with javascript
gReport.search('SEARCH',100)the 100 you can replace for any number you like.I have a report with filter,sorting and groups and it is gives no problem there.
any number means any number but not higher than the number you set at Maximum Rows Per Page.
You probably can mix the solution from Martin and the above code.
Regards,
Kees Vlek
<tt>Company: http://www.orcado.nl
Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
Twitter: http://www.twitter.com/skier66</tt>
If the question is answered please change it to answered and mark the appropriate post as correct/helpfull.
Edited by: kvlek on 24-apr-2013 12:29
Edited by: kvlek on 24-apr-2013 12:35

Maximum Time Exceed.

Hi Guru's,
I executed the MB5B report for finding the opening and closing stock providing the Material, Plant, Company code, Posting date but it took long execution time and ended in 'Maximum Time Exceed'.. I also tried in Background but the job didnt collected in spool, the spool list is empty. Before a week the report ran fine.. even i checked for a particular date..Please give me a solution.
Thanks,
Satish.M.R

Dear,
Check note: Note 25528 - Parameter rdisp/max_wprun_time and also consult your BASIS team.
Regards,
Syed Hussain.

Maximum Cells exceeded Error

Hi Guys,
guide me pls//
i am getting an error while opening a report..
like Maximum cells exceeded error...
how i can i over come this??

Hi Srini,
thanks for ur reply..
I am using pivot table view to display the report.
and i checked my instanceconfig.xml file.. in that i didnt find <Maxcells> tag in pivot table view section/
can i add that <Maxcells> tag in that section now?

NEXT button on report portlet shows 10 rows-maximum rows per page=9999

I created a report with the DB Provider portlet. I set the maximum rows per page to 9999 when displayed as a portlet and as a full page. I put the portlet on a page and it only shows 10 rows and then the next button.
If there are exactly 10 rows I get the next button. If I click it the next page loads with no data. If there are less than 10 rows there is no button.
If I create a new portlet it does not do this. I'm only having the problem with one portlet now but I've seen it in the past. I usually just build the portlet again but I would like to know how to fix it.
I can't customize the portlet because of bug #3467032.

Select customize and set the number of rows to 9999. I'm guessing that it's currently set to 10.

Unable to De-Authorize Computer due to Hard Drive Crash. Getting now Maximum Activations Exceeded

I purchased an iMac at BestBuy, installed my Adobe Cloud Subscription (secondary license, the primary is activated on my iMac at work) onto it and used it for a week. The hard drive crashed and I went back to BestBuy and had them replace the iMac with the same model.
I was obviously unable to de-authorize the returned iMac and on the new one I get the message: Maximum Activations Exceeded ...
Why isn't there an easier way to de-authorize computers.
I went to the chat and they gave me the tech support number which happens to be available only from Mo-Fr. I am pretty much unable to do any work from home over the weekend.
Is there any solution to this problem I am not aware of?

Nope, you need to call and have all your info ready. They are pretty sticky about confirming it's you. Once they confirm it's you they will change it. Easy Peasy. I have had to do it a couple of times over the years.

Export-csv output maximum row size

Hi all. May I know the maximum row size that can output to .csv using 'export-csv'??

There's no limit on writing to a CSV file.
You can try:
# max rows to export to CSV:
$i=0
While ($true) { #Forever
$i++
$i
"Some text" | Export-Csv -Path .\test12.csv -Append -NoTypeInformation
until you run out of disk space, which may take a while. A million lines using the above script makes a 5 BM file..
Now reading it back is an entirely different story. Try
Delimit..
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Set Maximum Rows Per Page not working

I want to display 50 rows per page and I tried the below but still I can see the default 15 rows per page.
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Maximum Rows Per Page
Set to = 50
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Rows Per Page Selector
Removed the check mark and still shows 15 rows per page.

Run your report. Set the Rows to 50. Press Go. Select 'Save Report' from the 'magic wheel' menu and next select 'Save as default report settings'.
It is a rather long way, but seems the only one...
Roel

OBIEE 11g: Report not displaying maximum rows per page

I have an OBIEE report that is not displaying the maximum rows per page. When I click on the UP/DOWN arrow at the bottom of the report there is no change.

Hi,
Refer the below link.
http://satyaobieesolutions.blogspot.in/2012/08/limit-row-in-table-and-graph-in-initial.html
OR,
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=1198961.1
Add the following to your instanceconfig and then restart the presentation service.
file path
D:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml just add below lines
<Views>
<Pivot>
<MaxCells>6500000</MaxCells>
<MaxVisibleColumns>100</MaxVisibleColumns>
<MaxVisiblePages>100</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
<DisableAutoPreview>false</DisableAutoPreview>
</Pivot>
<Table>
<MaxCells>6500000</MaxCells>
<MaxVisiblePages>100</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
</Table>
</Views>
Hope this help's
Thanks,
Satya

T-code CJ30,system gives an error of maximum time exceeds

Dear Sir
When we are executing T-code CJ30,system gives an error of maximum time
exceeds and some time the report is coming,we have exceeded the time
also but no outcome,since our project builder is not so
huge.Particulary we are facing in one project and rest of the project
takes lots of time.
Regards
Kunal Joshi

Hi,
Kindly write in the order of steps you have performed in the system.
with what you have written i got this:
You don't have big projects.
When you run CJ30, it gives time out error.
is this you want to say?
Regards,
Harsh.
Edited by: Harsh Saxena on Sep 10, 2010 2:40 PM

Maximum Rows for series in Charts (Cluster Bar Charts)

Question
Is there a way to dynamically define the "Maximum Rows" value for all the series in a cluster bar chart? I tried putting "&item_name." into the "Maximum Rows" field for a series, but get an Application Builder error indicating that the value should be numeric. I would like to set the "Maximum Rows" for all the series in a chart "on the fly".
Details
I have one horizontal cluster bar chart with 4 series on my page that has a variable number of rows i.e. the number of bar clusters that I want plotted varies based on the user's criteria. For one set of data there may be 10 clusters. If the user changes the criteria, the chart could then have 20 clusters. I have the "Maximum Rows" field for all 4 series in the chart set to 31 rows.
The Problem
The chart with only 10 clusters is two thirds whitespace. The 10 clusters fills up the bottom third of the chart. The top two thirds of the chart is blank. The chart with 20 clusters fills up the chart with no whitespace. The chart with 40 clusters gets the top 10 clusters cut off and only displays the bottom 31 clusters.
Any Suggestions
If you have any suggestions how I can accomplish this, please post them. Currently I am not interested in going outside of HTML DB. I may end up doing that though to get a more dynamic charting tool.
Thanks,
Mike

Note 367711.1 deals with this issue. The contents of the note are the below:
At this time, this is not possible to dynamically set these charting attributes, however, an internal enhancement request has been created requesting that this functionality be incorporated into the product. The current plan is to incorporate this feature into 3.0 version of the product, however, this is just the current plan and can change depending on the complexity of the implementation.

Maximum rows exceed in SmartView

Similar Messages

Maybe you are looking for