Maximum size HardDrive for Ultra 30

Does anybody know what the maximum size harddrive is for an Ultra 30.
I've been able to put a 40+ gig harddrive into an Ultra 5, but the Uktra 30 does not seem to accept a 38+ gig harddrive. It gives a trap error that I can't remember off hand.
Thank you,
James

Hello James,
larger disks (> 36 GB) should work fine. You might even use one of these 143 GB drives that cost a multiple of what the Ultra 30 is worth.
Reseat the harddisk, then use probe-scsi-all at the ok-prompt. Is the harddisk detected ?
Probably your drive was previously used with another operating system and therefore contains partition information (label) that Solaris doesn't like.
Unfortunately your description is very vague. When did the problem appear (during booting from the first harddisk, when this drive was inserted in the second bay OR when invoking format after booting from CD) ? Maybe the drive is damaged and interfers with the other devices on the SCSI bus (first harddisk, CD-drive).
In the first case install this harddisk (temporarily) in the first bay (the original one removed) and boot from CD (into single-user mode with verbose display). If the boot fails, the harddisk is bad.
In the second case it might help if you remove the partition information when installed in the previous system (PC).
Happy New Year !
Michael

Similar Messages

  • What is the maximum size limit for a KM document to be uploaded?

    Hi,
    1.  I have a requirement, wherein the user wants to upload a document which is more than 448MB in KM.
    I am not sure what is the maximum limit that standard SAP provides by default, which I can advice the user at the first place.
    2. what if we want to increase the max limit of the size?Where do we do that, can you suggest me the path for the same?
    Thanks in advance.
    Regards
    DK

    Hello,
    CM Repository in DB Mode:
    If there is a large number of write requests in your CM usage scenario, set up the CM repository in database mode. Since all documents are stored in the database, this avoids unintentional
    external manipulation of the data.
    CM Repository in FSDB Mode:
    In this mode, the file system is predominant. If files are removed from or added to the file system, the database is updated automatically.
    If you mainly have read requests, choose a mode in which content is stored in the file system. If this is the case, make sure that access to the relevant part of the file system is denied or
    restricted to other applications.
    What is the maximum size of the document that we can upload in a CM (DB) and CM (FSDB) without compromising the performance ?
    There are the following restrictions for the databases used:
    ·  Maximum number of resources (folders, documents) in a repository instance
       FSDB: No restriction (possibly limited by file system restrictions)
       DBFS and DB: 2,147,483,648
    ·  Maximum size of an individual resource:
       FSDB: No restriction (possibly limited by file system restrictions)
       DBFS: 8 exabytes (MS SQL Server 2000), 2 GB (Oracle)
       DB: 2 GB
    Maximum length of large property values (string type):2,147,583,647 byte
    What is the impact on the performance of Knowledge Management Platform and on Portal Platform when there are large number of documents that are in sizes somewhere from 100 MB to 500 MB or more.
    The performance of the KM and Portal platform is dependent on the type of activity the user is trying to perform. That is a heavy number of retrievals of the large documents stored in the repository for
    read/write mode decreases the performance of the patform. Searching and indexing in the documents will also take a propertionate amount of time.
    For details, please refer to,
    http://help.sap.com, Goto "KM Platform" and then,
    Knowledge Management Platform   > Administration Guide
    System Administration   > System Configuration
    Content Management Configuration   > Repositories and Repository
    Managers    > Internal Repositories   > CM Repository Manager
    Technically speaking the VM has a restriction according to plattform.  W2k is somewhere around 1,2G and Solaris, I believe, 4G.
    Say for instance I was on a W2k box I allotted 500+ for my J2EE Engine that would leave me with the possiblity to upload close to 600mb documents max.
    See if the attached documents (610134, 634689, 552522) can provide you some guidance for setting your VM to meet your needs.
      SUN Documentation
      Java HotSpot VM Options
            http://java.sun.com/docs/hotspot/VMOptions.html
      How to tune Garbage collection on JVM 1.3.1
            http://java.sun.com/docs/hotspot/gc/index.html
      Big Heaps and Intimate Shared Memory (ISM)
            http://java.sun.com/docs/hotspot/ism.html
    Kind Regards,
    Shabnam.

  • Is There A Maximum Size Limit for The MicroSD Card?

    Hey all,
    I'm a BB newbie.  I installed an 8GB MicroSD card.  Finally figured out that you must format the card from the device in order to get it to work.
    However, in doing so, my 8GB card is only recognized as 4GB.  Is there a maximum size card that the 8300 series(I have an 8320 through T-Mobile)  will recognize or is there something strange going on with my MicroSD card???
    The manual isn't clear on that.
    Thank you

    Supported SD card size is OS dependant as follows:
    BlackBerry Device Software 4.2.0 - Up to 2 GB
    BlackBerry Device Software 4.2.1 - Up to 4 GB
    BlackBerry Device Software 4.2.2 - Up to 4 GB
    BlackBerry Device Software 4.3.0 - Up to 8 GB
    BlackBerry Device Software 4.5.0 - Up to 8 GB
    BlackBerry Device Software 4.6.0 - Up to 16 GB
    Note that 16 Gigs was just added to the list a few days ago! This is directly from the Tech Support Site here:
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB05461
    Jerry

  • Is there a maximum size limit for a single file?

    I haven't been able to find a statement of the maximum size of a file. We're looking at storing several 5-10gb files in one file library.
    Is it possible?
    How badly would that impact performance?

    maximum size of a file. All files are stored as Binary Large Objects (BLOBs), A BLOB max size is (4 gigabytes -1) * (the value of the CHUNK parameter of LOB storage). Oracle Content Services configures its LOBs to have a 32K chunk size
    Note that there is a overhead by storing large files, you should compress your files if possible before storing them.
    http://download-east.oracle.com/docs/cd/B25553_01/collab.1012/b25492/contentservices.htm#CACHJJGI
    How badly would that impact performance?Compared to what? Oracle ASM gives you the ability to stripe your content over hundreds of physcal disks to improve the performence. http://www.oracle.com/technology/products/database/asm/index.html

  • Want to know Maximum size limit for TimesTen version 5.1.x

    Hello,
    I know that in prior releases the maximum TimesTen database size limit was 2GB.I got this info from one of the TimesTen documentation.
    As of now Im using version 5.1.x.Here Im not able to get any info regarding the maximum size limit of a TimesTen datastore. Please help me
    Thanks In Advance
    Pratheej

    Also be aware that on Windows you can rarely achieve a data store size of >1g
    It's down to the way Windows handles it'd DLLS - they tend to get loaded in a fragmented way and since TimesTen needs one contiguous slice of shared memory this causes a problem.

  • Maximum size limit for bufferedInputStream

    Hi All,
    What is the maximum limit to set the size for bufferedInputStream while reading a file.
    Default size is 1kb
    Maximum limit = ???
    Thanks in advance
    Edited by: sunRP on Aug 11, 2009 3:15 AM

    Looking at the source for 1.6.0_15 the default is 8192 and, other than the buffer size being greater than zero, there are no other constrains on the size so the limit will be the largest positive integer. Of course you may well run out of memory trying to allocate this amount of memory but ...

  • What is the Maximum Size limit for a Mailbox?

    Hi,
    I am a newbie to mac, before i use pc and Ms Outlook for the email application.
    Can anyone help me on these question:
    A. What is the maximum limit of a mailbox size?
    (in Ms Outlook, the max size of the .pst file is 2gb, we will have problem when our email mailboxes getting close to 2gb.)
    B. If the mailbox reaches the max. limit, how can we archives the old email?
    Thanks &Regards,
    Prasti.
    061122
    macbookpro   Mac OS X (10.4.8)  

    Hi Prasti.
    I believe the following article answers your questions:
    Overstuffed mailbox is unexpectedly empty

  • Maximum size of dbms_scheduler.create_job job_action parameter

    i'm running into a problem with the size limit for the dbms_job.submit what parameter... time to move to the dbms_scheduler.create_job package?
    can anyone tell me what the maximum size is for the dbms_scheduler.create_job job_action parameter?
    appreciate any information that can be provided.

    Herald ten Dam wrote:
    But how doy come in trouble with this length, normally a call to a procedure (in a package) and do there the job. Don't program the whole pl/sql (C/Java) in the call. With dbms_scheduler you can make also dependencies between jobs, so it is possible to split the functionality.Yes, I completely agree. The only times that I've put PL/SQL anonymous blocks in scheduler actions is when I want to guarantee the fewest dependencies for jobs (or chain steps) that are really critical, such as when you want to send an email or other notification that a failure has occurred. Otherwise I'd just call a procedure.

  • Oracle Database Maximum size (Linux)

    What is the maximum size possible
    for an Oracle Database on Linux ?
    Is it limited to 2GB ? (the max file size
    under Linux)
    Mysql allows 4GB max, but for each table.
    In fact 2GB with Linux (due to Linux
    Max file size = 2GB).
    null

    Log to sqlplus as system ...
    1. Create a new tablespace & datafile.
    CREATE TABLESPACE "TESTSPACE" DATAFILE '/db/u01/oradata/testdata.dbf' SIZE 1000M DEFAULT STORAGE ( INITIAL 100K NEXT 2K MINEXTENTS 2 MAXEXTENTS UNLIMITED PCTINCREASE 0 ) MINIMUM EXTENT 2K
    2. Then add datafiles to the tablespace as needed...
    ALTER TABLESPACE "TESTSPACE" ADD DATAFILE '/db/u01/oradata/testdata2.dbf' SIZE 1000M
    This will add two 1000m datafiles...
    You can alter and make the files sizes larger and smaller... You can also add more files...
    Also when you create tables make sure you reference them to the testspace tablespace or they will default to the user tablespace which will not be able to accomodate large data without modification.
    This is really just the tip of the iceberg...
    I really recommend reading the server concepts manual.
    -eggbert
    null

  • Set Maximum size for a subpanel created with splitter bars in LV8

    Does anyone know how to set the Maximum size for a subpanel created with asplitter bar? If I show one cluster in the subpanel and use the scroll bar to scroll, I can see more (blank) area than I want. I just want the user to be able to scroll a cluster within a subpanel while the cluster is larger than the view area of the subpanel. I don't want to let the user scroll outside the cluster.
    Ravi Beniwal

    I apologize for the mixup in terminology. Please read Pane wherever the word Subpanel was used.
    Please see the attached VI for a description of my problem.
    I would really appreciate any help with this.
    Ravi Beniwal
    Attachments:
    Pane Scrolling Problem.vi ‏10 KB

  • Set maximum size in Text Form Field Options for a field in bi publisher RTF

    Hi All,
    How to set maximum size in Text Form Field Options for a field in bi publisher RTF.
    I have a RTF whch is having a field in that i need to add some validation condition but after adding certain condition in Add help text tab ,it is not accepting after certain length, how i can increase the length to unlimited,please help me on this
    Thnaks

    Form fields have some restrictions if your are using version lower than 11g.
    They can accommodate only 393 chars. You can add the text in both status bar and help key, which can in total consume 393 chars.
    If your code logic is more than that, it can be split into multiple form fields as Avinash suggested or you can use sub template logic and handle coding over there. Again in sub template code can be within/outside form fields.
    So there is no option for user to increase the size of form field.

  • I want to set a maximum size for pictures when FF shows websites. How can i do that? NO I DONT MEAN "HOW TO ZOOM".

    I have FF 34 but this problem has been there for a lot of earlier versions. On many webpages there are pictures that cover my whole screen, and I want to set maximum size for showing images on webpages.
    I ONLY wanr to change the maximum size of the images, AND IAM NOT asking about how to zoom the webpage.

    Do you want to hide large images or merely make them smaller by setting a max-width and max-height?
    You would probably have to use JavaScript (bookmarklet) to achieve this reliably.
    There are bookmarklets to make large images fit in the window to avoid a horizontal scroll bar
    You can try this code in the <b>userContent.css</b> file (adjust the max-width accordingly).
    *http://kb.mozillazine.org/userContent.css
    <pre><nowiki>img { max-width: 1024px !important; height: auto !important; }</nowiki></pre>
    The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    *Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
    *Use a plain text editor like Notepad to create a (new) userContent.css file in the chrome folder (file name is case sensitive)
    *Paste the code in the userContent.css file in the editor window
    *Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userContent.css.<br>Otherwise Windows may add a hidden .txt file extension and you end up with a not working userContent.css.txt file

  • Error in RFC Adapter PI 7.10 maximum size of requests for one LUW

    Hello all,
    I have a big issue on our Development - SAP PI 7.10 System. If I try to push a RFC from a Client System
    I get follow error messagei in the Runtime Workbench (RWB)  back:
    processing error to be caused by: com.sap.aii.adapter.rfc.core.server.RfcServerException: maximum size of requests for one LUW has been reached (1). handling of request for tRFC (TID: 0AA001B8712C49D35D4D06C2) not possible (server: RfcServer[PKG_R3_D07_600_RFC_SND]1)
    But I don't know why. I checked follow OSS Notes:
    730870 and 774705 w/o success. It will be nice somebody can help me.
    Thanks
    S. Kohler
    P.S. We have the same scenario in our Quality SAP XI System and there works. I couldn't find any
    differences between the Adapters. Is there a problem with the parameters ????

    Hello Tarang Shah,
    okay. Here again ( I thought I mentioned above):
    in Q50 (SAP PI 7.10 System) we create a RFC Server with the program ID RFC_Q50.
    in D64 (SAP PI 7.10 System) we vreate a RFC Server with the program ID RFC_D64
    in D07 (SAP R/3 4.7 x110) we create a RFC Connection to D64 with the program ID RFC_D64.
    The testconnection works well. I see in our Dev. SAP PI System (D64) that the connection works.
    The problem is here, if you start in the application (System D07) the push, you get the error :
    maximum size of requests for one LUW has been reac hed (1). handling of re
    in Q50 (SAP R/3 4.7 x110) we create a RFC Connection to Q50 with the program ID RFC_Q50.
    The testconnection in Q17 works well. Also the push from the application (System Q17.)
    This means, the functionallity is okay on both sides (Q17 and D07) only the application sending
    process from D07 makes trouble ( you see in Transaction SM 58 on Client Site, the error as I mentiond above and in SAP PI side.) It seems that SAP PI could't accept more as one LUWs
    in the same time. Q50 (Q- System) accepted.
    So, this is the reason in my point of view, that the problem isn't the connection, seems more
    an paramter problem in D64 side. But I don't know which parameters. I checked the OSS Note 730870 and 774705 w/o success.
    Thanks
    S. Kohler

  • What is the maximum size for open_cursors parameter in 11g database

    what is the maximum size we can set for open_cursors parameter in 11g database..

    Oracle® Database Reference
    11g Release 1 (11.1)
    Parameter type     Integer
    Default value     50
    Modifiable     ALTER SYSTEM
    Range of values     0 to 65535
    Basic     Yes
    For details, go to the following link:
    http://www.seasongreetings.org/documentation/oracle/database/11.1/server.111/b28320/initparams153.htm

  • Maximum size for an HttpRequest? Set Content-Length?

    Hi, I'm managing to get small strings sent from my applet to my servlet, but when I try anything bigger, I get problems. Oddly enough, the larger object can get sent to my applet from my servlet without any issues.
    Can anyone tell me if there is a maximum size for sending responses?
    Or, if I have to set the content-length property in my applet before I send my data, how do I get the size of my object so I can set it?
    thanks for any advice any of you might have

    Thanks for the pointers.
    BalusC, at first I was trying to write my object without sending it through a byteStream first (hence the q) :), tried it that way too and wouldn't work.
    I finally figured out that it wasn't the code that was the problem, but it was an upload issue (server specific). Have changed the code to sending one line of data at a time since I was converting my object to an output file in the servlet anyway. Not the best solution but it works :)
    Thanks again

Maybe you are looking for