Maximum Slide Size

Anyone know if Keynote has a maximum slide size? I'm trying to create a Keynote presentation with a slide size of 4272X1080 and it won't seem to let me put that size in the custom slide settings. I've tried different sizes, but anything above 4000 gives me the error tone. Anyone else had luck entering a larger size? I'm wondering if 4000 may be the max Keynote will allow.

scooter22 wrote:
Anyone else had luck entering a larger size? I'm wondering if 4000 may be the max Keynote will allow.
4000 is the max for Keynote.

Similar Messages

Scanning Slides for Printing by 3rd Party: Maximum Print Size Wanted

I am wanting to license a series of vintage slides via my Zazzle.com store. The images scanned from the slides would be printed on the various products that they sell. Ideally I am looking to obtain the maximum resulting image size in the hopes of offering some of the designs on smaller sized posters. Some of the images were taken with everyday cameras while others were taken with expensive cameras such as a Zeiss Contarex so am guessing the film grain quality is going to vary although all are mounted in standard slide frames.
I wanting to scan slides, or have slides scanned, into a lossless format such as tiff for archiving purposes, which would then be copied and opened inside photoshop and illustrator. I also have negatives from box cameras and similar older materials, but want to tackle the slides first.
From reading the posts here the two main strategies appear to be:
1. Do it yourself:
I've read various posts that say this may take a specialized scanner costing $2,000, while others claim a Epson V500 does just as good of job - of course I wondering if the person using the Epson is wanting to print commercial products from the designs.
What machines are recommended for use with Lion?
Also there appears to be a debate about the best software, such as Digital Ice or VueScan? Any suggestions?
2. Hire a 3rd party service:
One main concern here is the items could get lost.
The other major concern is how good are the resulting slides going to be. I've looked at various 3rd party sites that offer scanning and each appears to offer a differing opinion as to what dpi should be used. I understand that at a certain point a higher dpi setting is not going to obtain any further helpful information from the slide, but what exactly is the maximum setting that I should be shooting for? I see services offering 4,000 dpi, yet some of the dedicated slide scanners can go much higher so I am wondering if these services are just wanting to use the lower dpi to save on the resulting image size as opposed to obtaining the maximum print size?

Kappy, How do you do it with iPhoto?
CMCSK, For some reason, against my expectations, iWorks or Pages was nowhere to be found. I "spotlighted" them after failing to find them in the applications folder. I did not think to look for Microsoft Word Trial Version on the Mac. I doubted it would be there because Apple has Pages and Numbers. I'll check later, but I guess I also want to know how to do it without trial software.
Kenichi Watanabe, Scaling only allows me to change the size, but not the position of the image. Halfway there!
RothRock, After clicking the arrow, I get many options, including scaling, but I can't find any positioning option (other than just the Centre option).
Does anybody know how to scale and position? I'm going to try iPhoto some more. Something as simple as positioning for printing shouldn't be this hard to find.

Slide Size = ? Aspect Ratio

Does anyone have any idea as to what aspect ratio a 1024 X 768 slide in Keynote is? I have a projector that the aspect ratio can be changed. My issue is that I don't know what size screen I need for the projector? They are available in 16:9, 1:1, and 4:1 aspect ratios. My presentation has been created in a 1024 X 768 slide size. I realize I can change that but would rather not as the 1024 X 768 slide size seems to be the best to have the type clean and visible.
Thanks in advance if you know.

You also need to know the lens zoom factor and the position of your projector. This will determine the size of the screen. The aspect ratio of the screen should be the same as the aspect ratio of the projector: Projecto 16:9 - Screen 16:9.
In terms of font size that is easy to read, that largely depends on the distance between the viewer and the screen. Rule of thumb is that the closest person shuold be 0.7 x the height of the screen (9' high screen = 6.3' to the front row of seating) and the furthest should be no more than 7 x the height of the screen (9' high screen = 63' to the last row of seating). This also depends on the content shown. So for slides with fine details (lot of small text, busy slides) maximum distance should be no more then 4 x height of the screen. 6 x for spreadhseet and up to 8 times for video and images.
Hope this helps.

Maximum file size in picture ring?

Hello folks!
I am planing to use a picture ring with a quite big amount of data needed.
My question: is there a maximum data size that i can embed in a picture ring (number of pictures or overall file sizes)?
Thanks!

If you have enough memory to keep all the images open simultaneously, then something like this might help. Put all your images in the same directory on disk and have no other files in that directory. Then use List Folder from the Advanced File palette to get an aaray of the filenames. Feed that array to a for loop where you open all the files and place the images into the pict ring. I have written a "slide show" program which does this. Never tried it with 400 images though.
If you do not have enough memory for all the images, then you need to manage the iamges much more carefully.
Lynn

Maximum File Size for a Captivate file before the graphics begin to get replaced with rectangles

I have Captivate 6
I published a 39 slide file with audio to an .exe.
It was 130 mb.
The first part of the course was fine, but when I got to slide 20, the graphics were replaced with a bright red rectangle.
What is the maximum file size before this happens?
(I ended up converting each audio file to mp3. That reduced the file size to 88 MB)

That red rectangle is usually due to the slide needing to be set to High Quality 24bit. I don't believe it has anything to do with the filesize.

The initial heap size must be less than or equal to the maximum heap size.

All,
Please help!!
I have tested my Application Client Project in WSAD on my pc and it works fine.
I have 1gb RAM on my pc. When I deploy the same app on another xp pc(same as mine but 512mb RAM) I get a heap size error. Here is the exact error:
Incompatible initial and maximum heap sizes specified:
initial size: 268435456 bytes, maximum heap size: 267380736 bytes
The initial heap size must be less than or equal to the maximum heap size.
The default initial and maximum heap sizes are 4194304 and 267380736 bytes.
Usage: java [-options] class [args...]
(to execute a class)
or java -jar [-options] jarfile [args...]
(to execute a jar file)
where options include:
-cp -classpath <directories and zip/jar files separated by ;>
set search path for application classes and resources
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
Could not create the Java virtual machine.
Press any key to continue . . .
Here is the batch file that runs my app:
@echo off
SET appClientEar=C:\corp\apps\mts\jars\MTSClientEAR.ear
set JVM_ARGS=-Xms256M -Xmx256M
set CLIENT_PROPS=C:\corp\apps\mts\jars\medicalclient.properties
set APP_ARGS=
call C:\bnsf\IBM\WebSphere\AppClient\bin\launchClientBNSF.bat "%JVM_ARGS%" %appClientEar% "-CCpropfile=%CLIENT_PROPS%" %APP_ARGS%
@pause
I have changed the value of Xms and Xmx of JVM_ARGS to different size but I sitll get error. Anyone knows what the problem is. Thanks..

Don't know why, but the "maximum heap size: 267380736 bytes" value is just slightly less than 256*1024*1024, wheras the reported initial size is equal to that.
Try setting the initial value to 255MB.

Since downloading the 2013 Keynote upgrade, the slide image size on handouts with 3 slides per page option is very small. Is there a way to make the slide size larger while still keeping 3 slides per page lines?

With the new Keynote upgrade (version 6.1), the slide image size on handouts is very small, which makes it difficult to read slide content when compiling lecture notes for students. Is there a way to make the slide size larger while still keeping to a format of 3 slides per page with lines?

A number of posts have reported the same issue, two workarounds:
1
check the paper handling options or equivalent in your print dialogue box and set to scale to fit
2
in the Keynote option, in the dropdown menu in the Print section, select Individual Slides
then choose Layout, and set the number of pages, when printed you will have multiple pages on a single sheet.

How to change font size, maximum column size in the result screen ?

hi All
That's great when using SQL Dev.
But I also have a trouble that how to change font size, maximum column size in the result screen ?
My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
Appreciate for anyone to help us.
Thanks all.
Sigmasvn

You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
Also, there s the option of switching the layout of a record in the grid.
Sue

What is an idea of maximum file size for a film in Captivate?

Hi there,
I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
Thanks in advance

Probably better guidelines that dictates 'size' of a vi are:
typically no more than 1 video screen in size
is it legible
and is it's function and operation clear.
I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Change slide size in 2 slide/page layout?

Several folks indicated that you can use the "layout" view to produce a handout with 2 slides per page. But there is still quite a bit of white space. How can you increase the slide size on the page to make them bigger? Also, is there a way to add page numbers to the page (I already have slide numbers).

Rocketscience,
welcome to the Keynote Discussions.
Well, I think the border around the two slides I print is just enough to punch and file the paper.
Oh, wait, I'm using [DIN] A4 format. Well, try this:
* In the print dialog choose Layout from the "Copies & Pages"
dropdown box and set "Pages per Sheet" to 2
(you know that but I repeat it for other readers)
* Choose Paper Handling from the same dropdown box and mark
"Scale to fit paper size:". Select A4 from the corresponding
dropdown box (yes, even if you don't use A4 format). Unmark
"Scale down only".
* Print you slides.
There's no possibility to add page (sheet) numbers in the print dialog. You could prepare a file in Keynote or Pages that only prints a page number and print these numbers in a second run on you handouts. Not very elegant but maybe better than to paginate with a counter

Maximum file-size for HR EIC emails

Hi folks
We currently use EIC in ERP, and have an issue with sending large emails/attachments as the maximum file-size appears to be only 2MB. This is set in the IMG activity Employee Interaction Center (EIC) -> Interaction Center Web-Client -> Communication Channels ->E-Mail -> Define E-Mail Profiles, the attachment maximum size is set to a maximum of 2,147,483 bytes.
I have tried searching for anyone else having a similar problem, but haven't found anything. I would imagine many customers would have EIC users in a Shared Services environment sending attachments over 2 meg; so before we log a call with SAP, has anyone else had this issue and how did you resolve it?
Thanks very much.
James

The maximum value is 2,147,483 bytes, which is what the config is set to. This seems pretty low, especially in this day and age.

Maximum font size for auto-sized form text

You need to let the user select a maximum font size for automatically sized text. If most of your fields are set at 10pt type, but you have one field for which you want the text to resize automatically, it looks stupid if that cell contains a small amount of text that’s set at 16pt or whatever. If you could set the maximum font size to 10pt for that field, then the text would be consistent with the text in the other fields unless there is so much text that it needs to scale down.

Can anyone please advise?
Cheers

Set maximum panel size

Hi,
I would like to know how can I set the maximum panel size, in order
that when I maximize it with a state property node set to 5 (maximized)
when I open it, it don't pass the size I want for that panel.
How Can I do It? I can set the minimum panel size, in File->Vi
properties->Window size but I can't set the maximum panel size?
Thanks,
ToNi.

Hi,
From my vi, before I call another vi from it, I have a FP Open and FP.
State property set to True and 4 (Minimized) respectively and then I
use a Run Vi invoke node and finally, after it, I have another FP.
State property set to 1 (Standard). My front panel when opens has
the same size as I saved it but LV not redraws it well. How Can I do to
solve this kind of problem? I have this problem since a lot of time ago.
ToNi.
Attachments:
sample.JPG ‏40 KB

What is the maximum file size for CSV that Excel can open ? (Excel 2013 64bit)

Hello,
Before anyone jumps in, I am not talking about the maximum worksheet size of 1048576 rows by 16384 columns.
I have client whom has a 1.5 Gb CSV file, 1.9, 2.6, 5, 17 and 89 Gb file (Huge).
If I open the 1.5 Gb, the file opens (After waiting 5 minutes) and then a warning pops up that only the first 1048576 rows have loaded. That is fair enough.
If I try and open any of the others, Excel comes up to a blank worksheet. No errors. It just seems to ignore the file I tried to open. This happens from within Excel (File - open) or from double clicking the file in explorer.
Excel goes to this blank page almost imeadiatly. It does not even try to open the file.
If I try with Ms Access, I get a size warning and it refuses to load the file. (At least I get a warning)
I would have expected Excel to load at least the first 1048576 rows (If that is what there are in the file), and give an error.
The computer is more than capable (Xeon processors, 16 Gb ram, SSD hard disks top of the line HP Z820 power workstation).
With the 1.5 Gb file loaded to 1048576 rows, it uses 15% ram/pagefile. CPU's hit about 5%.
I have confirmed it is Win 7 64bit, Excel 64bit. I am fairly confident we are over the file size but without an error message, I don't know what to tell my client whom is looking to me for answers.
I have already discussed that the 89gb file in Excel is unreasonable and they are looking at a stat's package but I need an answer on these smaller files.
Anyone got any ides ?
Michael Jenkin (Mickyj) www.mickyj.com (Community website) - SBS MVP (2004 - 2008) *5 times Microsoft MVP award winner *Previously MacWorld Australia contributer *Previously APAC Vice Chairman Culminis (Pro IT User group support system)* APAC chairman GITCA
*Director Business Technology Partners, Microsoft Small Business Specialist, SMB150 2012 Member

Hi,
The 1,048,576 rows & 16,384 columns is the
workbook size limitation in Excel 2013. Thus, I recommend we try the Mr. Bernie's suggestions to import the large CSV file.
1. Use VBA to read the file line by line and split/examine the import file in sections. If you have further question about the VBA, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
2. Use Excel 2013 add-ins. Power Pivot and Power Query. For more detailed information, please see the below articles:
http://social.technet.microsoft.com/Forums/en-US/9243a533-4575-4fd6-b93a-4b95d21d9b10/table-with-more-than-1-048-576-rows-in-power-query-excel-2013?fo
http://www.microsofttrends.com/2014/02/09/how-much-data-can-powerpivot-really-manage-how-about-122-million-records/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Slide Size Mysteriously Changed

Hi,
I was working on a slide presentation and all of a sudden I noticed in Navigotor mode the thumbnail pictures of the top 2 slides were scrambled and undistinguishable. Then I noticed that the thumbnails seemed smaller for some reason and wondered if I just imagining it. Then, once I closed the document, chose not to save it, reopened... there was a left and right strip of white or "blank" margin on both sides of all of my slides and of the navigator thumbnail pictures were a little smaller in addition to the additional white margins that made them even smaller.
I first went to my "Document Inspector" and wanted to see if I could figure out what might have changed with the slide size but didn't see anything that might cause this to happen.
Is it possible my file became corrupted somehow and now I have to rebuild my whole presentation to remove the white borders and restore proper size to my presentation?
Any help is greatly appreciated. Thank you.
Steve

The file is acting as if the slide resolutions were inadvertently increased. This may be a symptom of corruption. You should be able to copy the information off of the slides, but I'm not sure there is a single fix to remedy the situation. Any material that is based on an object on the slide Masters (such as the title box and body box) can be changed across the entire presentation by changing those items in the relevant Masters. Perhaps someone else has run across this and has better advice for recovery.

Maximum Slide Size

Similar Messages

Maybe you are looking for