Maximum string size???

Hello everybody,
I need to know how much data can be stored in a String.
In the following Topic I've read that the String size is limited to 32677 bytes: http://forum.java.sun.com/thread.jsp?forum=31&thread=57885
In another forum I read that String itself has no size-limitation but the amount of data that can be stored is related to the VM HEAP SIZE.
I'd be very glad to receice any help from you.
THX...
Benjamin Gutmann

However looking through the source of String there is
no limit opposed onto the length.Actually there is a limit, because the String data is stored internally in an array of characters. And there is an upper bound on the size of an array, because as the Java language specification says "Arrays must be indexed by int values". That's where Integer.MAX_VALUE comes from.

Similar Messages

What is maximum string size in form's text item.

Hi:
Is 65534 the maximum number of characters that a text item can hold? I believe this is true and then only when I use a long which is hard to handle as a string. I need to build a popup that allows a user to paste a large set of data and then I need to break the pasted information into 100 character chunks. Has anyone done this in the past and did you get around the character limit size?
Thanks,
Thomas

The Help documentation seems to indicate that 65,534 is the maximum. If you think a user will exceed that limitation, you may want to consider changing your design and provide a mechanism for storing the text file as a blob in the database. If you still needed to break the text up into chunks, you could write a stored procedure that could do that.

String size limitations, HTML table

Post Author: Jeff Kulbeth
CA Forum: General
I am currently using CR 8.5 and am aware of string size limitations... 254 characters max. I'm looking at CR XI and can't find any data on string size limitations. A few questions:
1) We're considering database fields larger than 254 characters, and would like to use CR to parse the field. In CR XI, what's the maximum string length that can return from a table and still be used in a formula? Can a Memo field be used in a formula in CR XI?
2) Once I've parsed the fields in the database table, I'll need to return formatted strings back to the report. The strings will be larger than 254 character ... What's the maximum string size allowed in CR XI?
3) Somewhat related, but not entirely: Have any patches been released that provide HTML table interpretation in CR XI?
Thanks for the help,
Jeff Kulbeth

Post Author: V361
CA Forum: General
The maximum length of a String constant, a String value held by a String variable, a String value returned by a function or a String element of a String array is 65,534 characters.
The maximum size of an array is 1000 elements.
The maximum number of arguments to a function is 1000. (This applies to functions that can have an indefinite number of arguments such as Choose).
Not sure about the HTML ?

Maximum Character size of Front Panel indicator in LabVIEW

Hi,
I have a simple question that I hope somebody can answer. Is there a maximum character size that can be displayed in a Front Panel indicator in LabVIEW? If so, what is it? I have a VI that is continuously reading a serial port and updating a front panel indicator, and I need to know how much text can be displayed before it either truncates or throws an error. This is for LabVIEW 2010 SP1.
Thank you,
J Korn

A quick Flatten to string shows how LabVIEW stores strings {size-data} Size is a U32 so 4294967295 characters max.
The big thing to remember is this memory must be contiguous (and the Indicator requires a COPY) so in practice the performance hit for constantly allocating larger and larger buffers for the data and available memory impose practical limits much lower than the 4294967295 Char maximum. Probably better to log the data to a file and maintain only the last x characters on the indicator and use the file to look a history data
Jeff

Setting maximum packet size in JDBC driver to send data to database

Could someone tell me how I can set the JDBC connection property of maximum packet size to send data to database?
Regards
Rashed

Hi thanks....I'm having this strange SQLException while trying to insert BLOB image data to Oracle database. I'm saying this strange because for the same image that has been inserted before it's throwing the exception. My program is run from Oracle form and then some image data are inserted into database through a loop. I can't realize what's the problem inside my code that's causing this problem. In fact, when I run my program independently not from Oracle Form, it runs fine, every image data get inserted into database. Given below is my code snippet:
public void insertAccDocs(String[] accessions) throws SQLException
    for(int q=0; q<accessions.length; q++)
    final String docName = accessions[q];
    dbThread = new Thread(new Runnable(){
    public void run()
      try{
      System.out.println("insertDB before connection");
               getConnected();
               System.out.println("insertDB after connection");
               st=con.createStatement();
         //String docName = acc; commented
     // String docName = singleAccession;
               String text = formatFree;
               String qry = "INSERT INTO DOCUMENT VALUES
('"+docName+"','"+text+"','"+formatted+"','"+uiid+"')";
               System.out.println("parentqry"+qry);
               int ok=0;
               ok=st.executeUpdate(qry);
               if(ok==1)
            System.out.println("INSERTION SUCCESS= "+ok);
                    System.out.println("Image List Size"+ imgList.size());
            // inserting into child
                    for(int i=0;i<imgList.size(); i++)
                  String imgPath = ""+imgList.get(i);
                              System.out.println("db"+imgPath);
                              FileInputStream fin = new FileInputStream(imgPath);
                              BufferedInputStream bufStr = new BufferedInputStream(fin);
                              byte[] imgByte = new byte[bufStr.available()];
                              String img = "" + imgNameList.get(i);
                              System.out.println("imgid="+i);
            callable = con.prepareCall("{call prc_insert_docimage(?,?,?)}");
            callable.setString(1,docName);
                        callable.setString(2,img);
            callable.setBinaryStream(3, bufStr , (int)imgByte.length);
            callable.execute();
        callable.close();
                 con.commit();
        con.close();
               else
                    System.out.println("INSERTION NOT SUCCESS");
   //   } //else end of severalAcc
               }catch(Exception err){ //try
                    System.out.println(err.toString());
    } //run
}); //runnable
dbThread.start();
}And the exception thrown is :
java.sql.SQLException: Data size bigger than max size for this type: #####
Please let me know if possible how I can get around this.
Regards
Rashed

C0111: Maximum script size exceeded.

Not sure if this has anything to do with it but
I am working with in the 12.6 Powerbuilder classic 30 day demo.
I just purchased 12.6 yesterday, waiting for the email to install the live copy today.
Is there anyway to increase the size on the script size maximium?
This script has 1,783 lines of code.
---------- Compiler: Errors   (10:41:49 AM)
reports.pbl(w_room_layout).pb_refresh.clicked.1780: Error       C0111: Maximum script size exceeded.
reports.pbl(w_room_layout).pb_refresh.clicked.1782: Error       C0111: Maximum script size exceeded.
reports.pbl(w_room_layout).pb_refresh.clicked.1784: Error       C0111: Maximum script size exceeded.
reports.pbl(w_room_layout).pb_refresh.clicked.1784: Error       C0111: Maximum script size exceeded.
---------- Finished Errors   (10:41:49 AM)

Actually, the size constraint is on the size of the compiled P-Code, which means you should probably watch for different things. Things that don't compile down to P-Code tokens (e.g. string constants, embedded SQL) should be reviewed carefully. If you have a lot of embedded SQL (a common trap for those new to PB), you might want to consider encapsulating that in a DataWindow, which will be more network-traffic-efficient at run time anyway.
Good luck.

The initial heap size must be less than or equal to the maximum heap size.

All,
Please help!!
I have tested my Application Client Project in WSAD on my pc and it works fine.
I have 1gb RAM on my pc. When I deploy the same app on another xp pc(same as mine but 512mb RAM) I get a heap size error. Here is the exact error:
Incompatible initial and maximum heap sizes specified:
initial size: 268435456 bytes, maximum heap size: 267380736 bytes
The initial heap size must be less than or equal to the maximum heap size.
The default initial and maximum heap sizes are 4194304 and 267380736 bytes.
Usage: java [-options] class [args...]
(to execute a class)
or java -jar [-options] jarfile [args...]
(to execute a jar file)
where options include:
-cp -classpath <directories and zip/jar files separated by ;>
set search path for application classes and resources
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
Could not create the Java virtual machine.
Press any key to continue . . .
Here is the batch file that runs my app:
@echo off
SET appClientEar=C:\corp\apps\mts\jars\MTSClientEAR.ear
set JVM_ARGS=-Xms256M -Xmx256M
set CLIENT_PROPS=C:\corp\apps\mts\jars\medicalclient.properties
set APP_ARGS=
call C:\bnsf\IBM\WebSphere\AppClient\bin\launchClientBNSF.bat "%JVM_ARGS%" %appClientEar% "-CCpropfile=%CLIENT_PROPS%" %APP_ARGS%
@pause
I have changed the value of Xms and Xmx of JVM_ARGS to different size but I sitll get error. Anyone knows what the problem is. Thanks..

Don't know why, but the "maximum heap size: 267380736 bytes" value is just slightly less than 256*1024*1024, wheras the reported initial size is equal to that.
Try setting the initial value to 255MB.

How to change font size, maximum column size in the result screen ?

hi All
That's great when using SQL Dev.
But I also have a trouble that how to change font size, maximum column size in the result screen ?
My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
Appreciate for anyone to help us.
Thanks all.
Sigmasvn

You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
Also, there s the option of switching the layout of a record in the grid.
Sue

What is an idea of maximum file size for a film in Captivate?

Hi there,
I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
Thanks in advance

Probably better guidelines that dictates 'size' of a vi are:
typically no more than 1 video screen in size
is it legible
and is it's function and operation clear.
I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Maximum file-size for HR EIC emails

Hi folks
We currently use EIC in ERP, and have an issue with sending large emails/attachments as the maximum file-size appears to be only 2MB. This is set in the IMG activity Employee Interaction Center (EIC) -> Interaction Center Web-Client -> Communication Channels ->E-Mail -> Define E-Mail Profiles, the attachment maximum size is set to a maximum of 2,147,483 bytes.
I have tried searching for anyone else having a similar problem, but haven't found anything. I would imagine many customers would have EIC users in a Shared Services environment sending attachments over 2 meg; so before we log a call with SAP, has anyone else had this issue and how did you resolve it?
Thanks very much.
James

The maximum value is 2,147,483 bytes, which is what the config is set to. This seems pretty low, especially in this day and age.

Maximum font size for auto-sized form text

You need to let the user select a maximum font size for automatically sized text. If most of your fields are set at 10pt type, but you have one field for which you want the text to resize automatically, it looks stupid if that cell contains a small amount of text that’s set at 16pt or whatever. If you could set the maximum font size to 10pt for that field, then the text would be consistent with the text in the other fields unless there is so much text that it needs to scale down.

Can anyone please advise?
Cheers

Set maximum panel size

Hi,
I would like to know how can I set the maximum panel size, in order
that when I maximize it with a state property node set to 5 (maximized)
when I open it, it don't pass the size I want for that panel.
How Can I do It? I can set the minimum panel size, in File->Vi
properties->Window size but I can't set the maximum panel size?
Thanks,
ToNi.

Hi,
From my vi, before I call another vi from it, I have a FP Open and FP.
State property set to True and 4 (Minimized) respectively and then I
use a Run Vi invoke node and finally, after it, I have another FP.
State property set to 1 (Standard). My front panel when opens has
the same size as I saved it but LV not redraws it well. How Can I do to
solve this kind of problem? I have this problem since a lot of time ago.
ToNi.
Attachments:
sample.JPG ‏40 KB

What is the maximum file size for CSV that Excel can open ? (Excel 2013 64bit)

Hello,
Before anyone jumps in, I am not talking about the maximum worksheet size of 1048576 rows by 16384 columns.
I have client whom has a 1.5 Gb CSV file, 1.9, 2.6, 5, 17 and 89 Gb file (Huge).
If I open the 1.5 Gb, the file opens (After waiting 5 minutes) and then a warning pops up that only the first 1048576 rows have loaded. That is fair enough.
If I try and open any of the others, Excel comes up to a blank worksheet. No errors. It just seems to ignore the file I tried to open. This happens from within Excel (File - open) or from double clicking the file in explorer.
Excel goes to this blank page almost imeadiatly. It does not even try to open the file.
If I try with Ms Access, I get a size warning and it refuses to load the file. (At least I get a warning)
I would have expected Excel to load at least the first 1048576 rows (If that is what there are in the file), and give an error.
The computer is more than capable (Xeon processors, 16 Gb ram, SSD hard disks top of the line HP Z820 power workstation).
With the 1.5 Gb file loaded to 1048576 rows, it uses 15% ram/pagefile. CPU's hit about 5%.
I have confirmed it is Win 7 64bit, Excel 64bit. I am fairly confident we are over the file size but without an error message, I don't know what to tell my client whom is looking to me for answers.
I have already discussed that the 89gb file in Excel is unreasonable and they are looking at a stat's package but I need an answer on these smaller files.
Anyone got any ides ?
Michael Jenkin (Mickyj) www.mickyj.com (Community website) - SBS MVP (2004 - 2008) *5 times Microsoft MVP award winner *Previously MacWorld Australia contributer *Previously APAC Vice Chairman Culminis (Pro IT User group support system)* APAC chairman GITCA
*Director Business Technology Partners, Microsoft Small Business Specialist, SMB150 2012 Member

Hi,
The 1,048,576 rows & 16,384 columns is the
workbook size limitation in Excel 2013. Thus, I recommend we try the Mr. Bernie's suggestions to import the large CSV file.
1. Use VBA to read the file line by line and split/examine the import file in sections. If you have further question about the VBA, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
2. Use Excel 2013 add-ins. Power Pivot and Power Query. For more detailed information, please see the below articles:
http://social.technet.microsoft.com/Forums/en-US/9243a533-4575-4fd6-b93a-4b95d21d9b10/table-with-more-than-1-048-576-rows-in-power-query-excel-2013?fo
http://www.microsofttrends.com/2014/02/09/how-much-data-can-powerpivot-really-manage-how-about-122-million-records/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Important conceptual question about Application Module, Maximum Pool Size

Hello everyone,
We have a critical question about the Application Module default settings (taking the DB connections from a DataSource)
I know that on the Web it is generally suggested that each request must end with either a commit or rollback when executing PL/SQL blocks "directly" on the DB without the framework BC/ViewObject/Entity service intervention.
Now, for some reasons, we started to develop our applications with thinking that each Web Session would reference exactly one DB session (opened by any instance taken from the AM pool) for the whole duration of the session, so that the changes made by each Web session to its DB session would never interfere with the changes made by "other" Web Sessions to "other" DB sessions .
In other words, because of that convincement we often implemented sort of "transactions" that open and close (with either commit or rollback) each DB session not in/after a single HTTP request, but during many HTTP Requests.
As a concrete example think of this scenario:
1. the user presses the "Insert" button. An HTTP request is fired. The action listener is executed and ends up with inserting rows in a table via a PL SQL block (not via the ViewObjects API).
2. no commit or rollback after the above PL/SQL block is done yet.
3. finally the user presses a "Commit" or "Rollback" button, firing the call to the appropriate AM methos.
Those three requests consist of what I called "transaction".
From the documentation it's clear that there is no guarantee that the couple AM istance + DB session is the same during all the requests.
This means that, during step 2, it's possible that another user might reference the same "pending" AM/DbSession for his needs and "steal" somehow the work done via PL/SQL after step 1. (This happens because sessions taken by the pool are always rolled back by default.)
Now my question is:
Suppose we set the "Maximum Pool Size" parameter to very a great number (always inferior to the maximum number of concurrent users):
Is there any guarantee that all the requests will be isolated in that case?
I hope the problem is clear.
Let me know if you want more details.

Thanks for the answers.
If I am right, from all your answers about resource avaiability, this means that even supposing the framework is able to always give us the same AM instance back from the AM pool (by following the session-affinity criterias), there is, however, no "connection affinity" with the connections from the DataSource. This means that the "same AM instance" might take the "a new DB connection", if necessary, from the connection pool of the DataSource. If that happens, that could give us the same problems as taking "a new AM instance" (that is, not following session-affinity) from the beginning, since each time an a new connection is taken (either via a new AM instance or via the same AM instance plus a new DB connection), the corresponding DB session is rolle back by default, clearing all the pending transactions we might have performed before with direct PL/SQL calls bypassing the AM services during the life cycle of our application, so that the new HTTP request will have a clean DB session to start to work with.

Export-csv output maximum row size

Hi all. May I know the maximum row size that can output to .csv using 'export-csv'??

There's no limit on writing to a CSV file.
You can try:
# max rows to export to CSV:
$i=0
While ($true) { #Forever
$i++
$i
"Some text" | Export-Csv -Path .\test12.csv -Append -NoTypeInformation
until you run out of disk space, which may take a while. A million lines using the above script makes a 5 BM file..
Now reading it back is an entirely different story. Try
Delimit..
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Maximum string size???

Similar Messages

Maybe you are looking for