Maximum support entries in the directory

1.Can you specify the directory service providers for weblogic and maximum supported
entries in proposed directory.
2. How is directory context managed?

Yes Total entries is the number of directory entries present in OID. Each entry corresponds to collective information about a record or an object.

Similar Messages

  • Unable to create database entry in the directory service. - TNS-04

    We run into this error when we tried to register an Oracle 10.2.0.4 database with OID server (10.1.4.3):
    Unable to create database entry in the directory service. - TNS-04409: Directory service error
    We use Oracle DBCA to register to the OID. Both Oracle database and OID server are all running under Sun Solaris environment.
    In the meantime, I found these errors in the oid logs:
    oidldapd01.log:
    2009/07/13:21:15:47 * DispatcherListener:2 * ERROR : gslsflAcceptConnAndSend : OS 2 : Unable to accept New TCP
    connection
    Any ideas?
    Thanks
    Naiying

    Hi,
    Thanks for update.
    No, didn't find DSCC agent logs get updated when I have the pop up.
    C:\dsee7\var\dcc\agent\logs
    In the glassfish server log, I didn't find new transaction when I hit the issue
    C:\glassfish3\glassfish\domains\domain1\logs

  • How to find multiple entries in the Directory

    Hi,
    my directory contains lot of multiple entires and I want to find out is there a easier method by a script or command to find out all the mutiple entries in the directory.
    Thanks!!
    Message was edited by:
    Sun_One@TCS
    Message was edited by:
    Sun_One@TCS

    Are you talking about entries that have been renamed because of a Replication Naming conflict (like the entry was added on 2 masters at the same time) ?
    If so, please check the Administration Guide, Replication section.
    <http://docs.sun.com/app/docs/doc/819-0995/6n3cq3av8?a=view#gdquf>
    If you were talking about something else, please be more explicit. Directory Server does not allow you to create multiple entries with the same name. DNs are unique.
    Regards,
    Ludovic

  • Know: numbers of entries in the directory   ??

    Hi.
    would like to know the number of directory entries.
    I use the command *./dsconf info -h localhost -p 389 -v*
    this shows the following
    Instance path : /var/opt/SUNWdsee/dsins1
    Global State : read-write
    Host Name : amtest
    LDAP Port : 389
    SSL Port : 636
    Total entries    :  3908
    Suffixes : dc=example,dc=cl (master)
    Dest. Servers : localhost:389
    localhost:6389
    No active tasks
    The "info" operation succeeded on "localhost:389".
    Total entries These are the entries in the directory???
    Thanks
    Edited by: Rodrigo0461 on Oct 31, 2012 11:26 AM

    Yes Total entries is the number of directory entries present in OID. Each entry corresponds to collective information about a record or an object.

  • How to add or modify an entry using the JNDI

    Hi all,
    Usually I have used the netscape library to write directory application, now I have to use the JNDI ...
    Could I have some examples about the add modify and delete entry on the directory?
    Thanks a lot!
    M@x

    Download the LDAP Service provider at http://java.sun.com/products/jndi/index.html#download_ldap
    It has some example code too

  • Maximum Supported resolution on graphics card???

    Does anyone know the maximum supported resolution on the MacBook graphics card? I'd like to see if i could get a cheaper and bigger display than the ones made by apple. Any info would be appreciated.

    No, that's just for the internal display.
    Here's the info from Apple's hardware documentation
    Extended Desktop Mode- In extended desktop mode, the resolution of the two displays can be set independently. In this mode, the maximum external display resolution supported by the MacBook is 2048 x 1536 at 60 Hz for analog displays and 1920 x 1200 at 60 Hz for digital displays.
    1920x1200 is the native resolution for the 23" Apple display, the 24" Dell display, and probably some others. They work great with Macbooks.

  • How to create the multi-realm (or multi-entries)in one Directory instance?

    how to create the multi-realm (or multi-entries)in one Directory instance?
    I have installed a new iplanet Directory Server 5.2 on a win2k box, named "vp.com1.com"
    When I installed this server, it helped me to create a new Directory server instance with the default realm "dc=com1,dc=com".
    I could log on console and found root node, which is "com1.com"
    expanded this root node, I got a tree as following:
    "com1.com" -> "vp.com1.com" -> "server group" -> "Directory Server(VP)"
    Then open "Direbory Server(VP)" -> click tab "Directory"
    Got a tree as following:
    vp.com1.com(389) --> dc=com1,dc=com
    o=NetscapeRoot
    Now I wanna create a new entries, which is "dc=com2,dc=com"
    How to do?
    I had checked almost all the related doc but failed to get the valuable info.
    Would you like to do me a favour? Or forward me some reference?
    Because I'm a new guy for iplanet Directory Server, would you pls me the help in detail.
    This task is very urgent for me, so really appreciate your early help!

    Look on page 87 of the Sun ONE Directory Server 5.2 Administration Guide. The section "Creating a New Root Suffix Using the Console" should give you step-by-step instructions.

  • OBI 11g Error : exceeds an entry's the maximum size soft limit 256

    Hi All,
    I am getting a Warning in EM as below:
    Adding property Desc with value "+report description+". exceeds an entry's the maximum size soft limit 256. There are 333 bytes in this property for item /shared/folder/_portal/dashboardname
    It happens only when, if we provide a long description text (>256 bytes) for a report in the 'Description' box while saving the report.
    Do you have any ideas why it is happening and what can be done to remove this warning.
    An parameter needs to be changed..??
    Obi version 11.1.1.5.0
    box : Unix

    We tried that...
    But most of the dashboards/reports have been migrated from 10g and the reports are being built by Users not Dev team, adding their own description to report.
    I need to know ... if there is any parameter which can fix that...

  • How much is the maximum support for memory for hp dv6 6b68ex?

    i recently bought the HP dv6 6b68ex. i want to add more ram since only 6gb is installed
    i would like to ask if how much is the maximum support for ram for my laptop
    thanks

    Hi,
    Ok, I've found it now. Based on the following information, max RAM is 8Gb:
       http://h20195.www2.hp.com/v2/GetPDF.aspx/c03063996​.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Unable to create the Directory Server entry on the LDAP Console

    When I try to create the connection with the Directory Server I get the following message:
    Could not contact the DSCC agent on <server>. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11162.
    I found a bug related to this issue and installed the patch 123893-15. I restarted the cacaoadm and the console:
    root@mntsammx # cacaoadm list-params
    snmp-adaptor-port=11161
    snmp-adaptor-trap-port=11162
    jmxmp-connector-port=11162
    commandstream-adaptor-port=11163
    rmi-registry-port=11164
    secure-webserver-port=11165
    java-flags=-Xms4M -Xmx128M -Dcom.sun.management.jmxremote -Dfile.encoding=utf-8 -Djava.endorsed.dirs=/usr/lib/cacao/lib/endorsed
    micro-agent=false
    java-home=/usr/jdk/jdk1.5.0_18
    jdmk-home=/usr/share/lib/jdmk
    nss-lib-home=/usr/lib/mps/secv1
    nss-tools-home=/usr/sfw/bin
    retries=4
    log-file-limit=1000000
    log-file-count=3
    log-file-append=true
    enable-instrumentation=false
    user=root
    group=sys
    network-bind-address=127.0.0.1
    watchdog-heartbeat-timeout=60
    And as you can see it is running on that port. What else needs to be done ?
    Thanks!

    Well... this ALMOST worked. I got closer. I found out there are three cacaoadm deamons on the machine, so, I started the correct one at this time:
    [server1]/opt/myuser> ps -ef | grep cacao
    root 17773 1 0 Jun 12 ? 0:02 /usr/lib/cacao/lib/tools/launch -w /var/cacao/instances/default -L 16384 -P /va
    myusermx 22756 20845 0 10:06:14 pts/4 0:00 grep cacao
    So, I stopped the old one:
    root@server1 # cd /usr/sbin
    root@server1 # ./cacaoadm stop
    root@server1 # ps -ef |grep cacao
    root 23393 23045 0 10:16:20 pts/4 0:00 grep cacao
    root@server1 #
    Then I changed to the location of the correct one
    cd /opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin/
    [server1]/opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin> ./cacaoadm set-param network-bind-address=<my_ip>
    [server1]/opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin> ./cacaoadm start
    [server1]/opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin> ./cacaoadm status
    default instance is DISABLED at system startup.
    Current retries count : 0/4
    Processes:
    23755
    Uptime: 0 day(s), 0:0
    [server1]/opt/myuser/sunoneldap/dsee6/cacao_2/usr/sbin> ps -ef | grep cacao
    myusermx 23753 1 0 10:17:53 ? 0:00 /opt/myuser/sunoneldap/dsee6/cacao_2/usr/lib/cacao/lib/tools/launch -w /opt/man
    myusermx 23918 20845 0 10:18:22 pts/4 0:00 grep cacao
    So, I went back to the console, at this time it let me thru the step to accept the certificate, I did click next and an exception was threw. I copied it, but I lost it. After that, I wasn't able to get to the same point again, I am back to the old message that it can't contact the cacaoadm....
    Any other inputs?

  • Maximum number of documents knowledge directory can handle

    Hi,
    I am wondering, what could be the maximum number of documents knowledge directory can handle in terms of indexing and search in WCI 10.0.3 release.
    I tried to google and also browsed oracle documentation but didn’t get any clue about the number of taxonomy documents it can handle.
    We have to develop a portlet which can perform a customized search (based on custom properties) on a taxonomy folder which would contain almost 2, 00, 000 documents.
    Would it be possible in term of performance to manage this number of documents in WCI?
    Regards,

    Based on the wording of your post, I assume some degree of familiarity with WCI. Now, there are quite a few variables besides the raw number of documents when it comes to acceptable indexing and search performance. Your best options are: try it, or (if you have a support contract) go through support to get a good answer based on your intended production environment.

  • Tuning the directory

    I have a directory with more then 700 000 entries in it,
    after a few days of testing we saw that we have more then 30 searches that are done against data that hit the allidthreshold, ( so unindexed search), at the same time we are thinking about adding more RAM so we can get as close as having all the data into either the entrycache or the dbcache, will that solve the allidthreshold problem. And where should we concentrate the RAM, dbcache or entrycache.

    I think the first step is to understand how your clients are using your directory. Many directories are used for simple lookups on unique attributes (uid, email address, employee number). In this type of environment the settings almost have no meaning.
    If you support white pages lookups (e.g. lookup by department number or locality or something like that) then you might want to analyze the value sets in those attributes to see if an adjustment is needed. Also keep in mind that the directory look-through limits and return limits may limit your clients also, so there may not be value in letting them match quickly against 15,000 entries if they can only see 1000 of them.
    Also the look-through and return limits in DS 5.X can be set per BIND DN, so if you have an infrequent need to do un-indexed searches that return a lot of data, you can set that up for a specific ID and let the queries scan the database and return what is needed. Performance won't be good, but sometimes it's OK if the need is to generate a report and the speed of the result is not critical. Of course that's not a great use of directory resources, but sometimes it's the best solution.

  • Dism - The directory could not be completely unmounted - process explorer can't find open processes and unmounting fails

    Hi all,
    Installed WAIK on server 2008 R2 64 bit. I'm setting up some boot images, and am having a real hard time getting drivers to integrate into the driver store in the boot images.
    What I'm finding is that when adding drivers to the boot image the gui hangs part way through over 50% of the time using Dell 760 or HP NX9420 drivers extracted to pull out the inf files. It's really flakey and will work after a couple of attempts and when the wind is right.
    The main problem is that when the process fails the image is left open, so using dism to list mounted images and then umount the open images is the only way to try again.
    However, some images won't unmount and the unmount process displays the following:
    C:\Windows\system32>dism /get-mountedwiminfo
    Deployment Image Servicing and Management tool
    Version: 6.1.7600.16385
    Mounted images:
    Mount Dir : C:\Users\davros\AppData\Local\Temp\~$WDSMGMT.000
    Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
    wim
    Image Index : 2
    Mounted Read/Write : Yes
    Status : Invalid
    The operation completed successfully.
    C:\Windows\system32>dism /unmount-wim /mountdir:C:\Users\davros\AppData\Local\Te
    mp\~$WDSMGMT.000 /discard
    Deployment Image Servicing and Management tool
    Version: 6.1.7600.16385
    Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
    wim
    Image Index : 2
    Unmounting image
    [==========================100.0%==========================]
    Error: 0xc1420117
    The directory could not be completely unmounted.  This is usually due to applica
    tions that still have files opened within the mount directory.  Close these file
    s and unmount again to complete the unmount process.
    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
    Using process explorer shows no running processes that have the files open and the dism.log file shows:
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:75 - CWimImage::Unmount(hr:0xc1420117)
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1068 - CWimManager::InternalOpUnmount(hr:0xc1420117)
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0xc1420117)
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 Error executing command - CWimManager::InternalExecuteCmd(hr:0xc1420117)
    2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0xc1420117)
    2009-12-16 11:49:35, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2009-12-16 11:49:35, Info                  DISM   DISM.EXE:
    2009-12-16 11:49:35, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2009-12-16 11:49:35, Info                  DISM   DISM.EXE:
    2009-12-16 11:49:35, Info                  DISM   DISM Image Session: PID=5580 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Found the OSServices.  Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
    2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
    Rebooting the server clears the lock, but it's really becoming a joke, as I can create a boot image with the drivers, but then going back into add another driver causes the gui to not respond.
    Any suggestions gratefully accepted. - Matt.

    Hi all,
    had same problem unmounting the wim file using Windows 7 Pro 32bit.
    My solution was: Checking for "wrong" Dism.exe
    Preparing a WinPE I followed the steps in the help of AIK. I ran the
    copype.cmd batch. When it was finished, it said that it added something
    to the path environment variable. It was clear that it did so in order
    to find the tools needed for the further steps. As long as everything
    worked, I didn't give it a second thought. Then I could not unmount the
    WIM.
    I looked at the PATH variable: NO entry pointed to the directory where
    dism.exe was in. (In my case that would have been
         c:\program files\windows aik\tools\x86\servicing
    Magically, dism.exe started from everywhere though.
    Doing a      dir c:\dism.exe /s /a     showed I had a Dism.exe in
    c:\windows\system32, as well. This one has a file size different from
    the correct one. Obviously I had started this one (because PATH points
    there).
    Starting the correct dism.exe let me unmount the WIM without problems.
    Regards,
    Robert

  • Unable to print from MS Word: "The Directory Service is currently unavailable"

    Hi! I hope you can help me. Please note that I have a Windows XP computer (Home Edition, Version 2002, Service Pack 3, 32-bit). When I initially installed a Brother printer (model# MFC-J475DW) in Dec 2013, I had no problems printing documents. My problems
    started about 2 days ago. I got an error message after I opened a MS Word document (.doc) and clicked the Print button to print a document. The Printer "Name" field was empty.  I clicked the dropdown box in that window and saw 3 options:
    1 - Brother MFC-J475DW Printer
    2 - Brother PC-FAX v.3.2
    3 - PaperPort Image Printer
    When I selected "Brother MFC-J475DW Printer," a Microsoft Word dialog box appeared, saying the following:
    "The printer has not yet responded, but the Microsoft Office program may be able to proceed without printer information. Do you want to continue to wait for the printer?"
    I can either click on a Yes button or a No button. Either way, I'm brought back to the Print page. When I click on the OK button to start printing, another error message appears:
    "Windows cannot print due to a problem with the current printer setup. Try one or more of the following:
    *Check the printer by printing a test page from Windows.
    *Make sure the printer is turned on and online.
    *Reinstall the printer driver."
    I have a choice to click either OK or Web Help. I click the OK button to close the box, then return to the Print page. When I click on the "Find Printer..." button, the Find Printers window appears for a moment, then is replaced by this error message:
    "The Directory Service is currently unavailable"
    On Friday (Mar 21), when the error first occurred, I was able to print a letter in MS Word after un- and re-installing the Brother printer and its drivers. The problem reappeared the next day (Saturday). I don't want to do that every time to print a single
    page, so would you please recommend a solution?
    By the way, I am able to print a test page from the printer in Control Panel, and I can print from a Notepad document. Also, when I go to the Control Panel, select "Printers and Faxes," then right-click on the printer (Brother MFC-J475DW Printer),
    then select the Ports page, there's a check mark next to USB001 (not LPT1 or COM1). When I click on the "Configure Port..." button, I get this error message:
    "An error occurred during port configuration. This operation is not supported."
    Earlier today, I got a reply from brother.com's tech support (thanks to the 1 year warranty). They said the problem is on my PC, not their printer. However, they provided links to completely uninstall the printer, then reinstall it. I did just that, but
    the problem persists. I'll download OpenOffice.org's Office Suite to see if I can print documents with their software instead of MS Word. Until then, I await any suggestions.
    I hope this info is helpful. Thanks in advance for your help.

    I downloaded OpenOffice and am able to print documents (in particular, the same document I created in MS Word). I guess MS Word is to blame. I believe the issue is concluded, but I'd welcome any comments about the Active Directory, as I might have a problem
    with OpenOffice in the future regarding that.

  • I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

    I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
    I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
    Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
    Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
    Bullsh*t Windows can help me with anything from Apple.
    So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
    So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
    What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
    I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
    Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
    So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
    . . . . . . . . . . . . Help me.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W.

Maybe you are looking for