Maximum text length
I have this code:
JFormattedTextField jft=new JFormattedTextField(new MaskFormatter("###"));I thought that this will allow text to be maximum length 3 but this code actually demands that length must be exactly 3 numbers.
How do I make that I can type maximum 3 numbers?
did you try
formatter.setPlaceholderCharacter(' ');on your formatter to set the unused space to blank?
Similar Messages
-
Dear Friends,
Can anybody tell me what is the maximum length of the PO header text.
Tks
SujithI guess there is no specific restriction on that.
-
Maximum Text Length of FS Item
Hi
I have recently noticed that when we Load From Stream to update FS Items in BCS from a BI infoobject, the Long Text value is truncated at 45 characters.
The infoobject being read has long text set to 60 characters, and the BCS infobject being written to has long text set to 60 characters, however the read from stream seems to have an embedded 45 character maximum.
The FS Items text can be updated manually up to 60 characters, however in the read from stream log, in the source data it is only reading 45 characters of the long text.
Is 45 characters a standard maximum permissable - or does this sound like a bug ?
ThanksThibaud - thanks for this. I foolishly searched OSS with "Long Text" and BCS, and this note didn't show up. I shoud have used Long Text and Datastream.
-
Maximum Allowed Text Length for JTable Column
Can you please help me with a JTable Doubt
How do I set the Maximum Allowed Text Length for a Particular Column of a JTable?Thanks a lot mate. I used the following
class MaximumLengthFilter extends DocumentFilter {
public void replace(DocumentFilter.FilterBypass fb, int offset, int length,
String text, AttributeSet attr) throws BadLocationException {
if ((fb.getDocument().getLength() + length) < 10)
fb.replace(offset, length, text, attr);
else
Toolkit.getDefaultToolkit().beep();
} -
How to increase maximum input length of a short text object in SE63
Hi All,
In se63 translation transport when a object name is provided for short text translation, fields like technical information, modified/ Decision Required and maximum input length are displayed, how can maximum input length of a text can be increased if we want to enter more characters than specified in the maximum input length field.
Regards,
ShruthiIncrease the length of the source field, which you are translating..
Cheers!
Mishra -
Unity 7.02 maximum message length only 30 secs
Unity 7.02 maximum message length is approx 30 secs regardless of the settings in sys admin.
Has anyone encountered this issue?Hi Peter,
It sounds like you may be running a Demo License;
Limits on a Cisco Unity Demonstration System
Depending on the type of license file you use-Default License File or Time-Limited License File-the Cisco Unity demonstration system will have the limits listed below.
Default License File
â¢10 languages
â¢2 RealSpeak text-to-speech (TTS) sessions
â¢10 mailboxes for one of the following subscriber types:
-Unified Messaging (UM) subscribers
-Voice Messaging (VM) subscribers
â¢10 Cisco Unity Inbox subscribers
â¢2 voice ports
â¢2 voice-recognition sessions
â¢30-second limit for messages
â¢The ability to integrate with any supported phone system
Time-Limited License File
The time-limited license enables either Unified Messaging (UM) or Voice Messaging (VM) with the following limitations:
â¢UM feature package
-50 UM subscribers with 16 sessions
-2 RealSpeak text-to-speech (TTS) sessions
-2 languages
-AMIS
-16 voice ports
-2 voice-recognition sessions
â¢VM feature package
-50 VM subscribers with 16 sessions
-2 RealSpeak text-to-speech (TTS) sessions
-2 languages
-25 Cisco Unity Inbox users
-16 voice ports
-2 voice-recognition sessions
The time-limited license includes the following additional limitations:
â¢Time limit (after which Cisco Unity stops handling calls)
-60 days
-90 days
â¢Only one license file on the Cisco Unity server is permitted
â¢Non-renewable
â¢Locked to the specific MAC address of the network interface card (NIC) on the Cisco Unity server
â¢The ability to integrate with any supported phone system
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/702curelnotes.html#wp49973
Hope this helps!
Rob -
How set maximum character length in Fxml
Hey can any body help me set Maximum character length in Fxml.
thanx in advanceI wrote my own TextField.
I can't give you the code right now, but it's easy to create it by yourself.
0 - create a private method that deletes any unwanted char/s: restoreRightLength();
1 - Add a listener on the textProperty of your TextField/TextArea that calls restoreRightLength() method.
2 - Override the following methods:
@Override
public void replaceText(int start, int end, String text) {
super.replaceText(start, end, text);
restoreRightLength();
@Override
public void replaceSelection(String text) {
super.replaceSelection(text);
restoreRightLength(); -
"Maximum Session Length in Seconds" Not Working In Apex 3.2
Hello.
I am using Apex 3.2 and have noticed that pages are session timing out after just 10 minutes of inactivity. I am aware of the new security attributes "Maximum Session Length in Seconds" and "Maximum Session Idle Time in Seconds".
I asked our Apex admin and he reported that these attributes are set to 8 hours on the instance level. Within my own Apex application, these two attributes are not set at all. According to the popup help window associated
with these attributes, if they are not set, then there is no timeout at all that is enforced.
So, does anyone know why my application pages are session timing out after just 10 minutes of inactivity and users are forced to login again?
Thank you.
ElieScott,
Thank you for your help on this.
I've uploaded my Apex app called "Online Model", App ID 62063 in my workspace EEG on the Oracle hosted site apex.oracle.com.
Workspace = EEG
Username = [email protected]
Password = galaxy (I'll change the password after you're done helping me)
Orginally, this app had "Database Authentication" set. I changed this to "DAD Authentication" so that you can simply run it without having to login.
If I open up the app in developer mode and simply leave it alone for, say, 30 minutes and then click on the "developer bar" to see the definition of one of the pages, Apex instead prompts me to re-login again into Apex. I've not placed any values in any of the "Session Timeout" fields on any of the pages in this app.
When the same app is run as a user (that is, no "developer bar" appears at bottom of pages), again the page will time out after about 30 minutes of in-activity.
And as mentioned in my original posting, our Apex Admin has the "Administrator Timeout Session" field set to 8 hours.
The Apex 3.2 docs say that if no value is placed in these Timeout Session fields, then there is no timeout imposed.
Thank you for your help. It's much appreciated.
Elie -
Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.
Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software. -
Hi,
running SQL*Loader (Release 8.1.7.2.1) causes an error "SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]". This error occurs when SQLLoader is trying to load several thousand records into a database table. Each record is less than 250 bytes in length.
Any idea what could cause the problem?
Thanks in advance!
Ingo
And here's an extract from the log file generated by SQLLoader :
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 1360 rows, maximum of 10485760 bytes
Continuation: none specified
Path used: Conventional
Table "SYSTEM"."BASICPROFILE$1", loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
UUID FIRST * O(X07) CHARACTER
DOMAINID NEXT * O(X07) CHARACTER
LASTMODIFIED NEXT * O(X07) DATE DD/MM/YYYY HH24:MI:SS
ANNIVERSARY NEXT * O(X07) CHARACTER
BIRTHDAY NEXT * O(X07) CHARACTER
COMPANYNAME NEXT * O(X07) CHARACTER
DESCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAME NEXT * O(X07) CHARACTER
COMPANYNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
GENDER NEXT * O(X07) CHARACTER
HOBBIES NEXT * O(X07) CHARACTER
HONORIFIC NEXT * O(X07) CHARACTER
JOBTITLE NEXT * O(X07) CHARACTER
KEYWORDS NEXT * O(X07) CHARACTER
LASTNAME NEXT * O(X07) CHARACTER
LASTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
NICKNAME NEXT * O(X07) CHARACTER
PREFERREDLOCALE NEXT * O(X07) CHARACTER
PREFERREDCURRENCY NEXT * O(X07) CHARACTER
PROFESSION NEXT * O(X07) CHARACTER
SECONDLASTNAME NEXT * O(X07) CHARACTER
SECONDNAME NEXT * O(X07) CHARACTER
SUFFIX NEXT * O(X07) CHARACTER
TITLE NEXT * O(X07) CHARACTER
CONFIRMATION NEXT * O(X07) CHARACTER
DEFAULTADDRESSID NEXT * O(X07) CHARACTER
BUSINESSPARTNERNO NEXT * O(X07) CHARACTER
TYPECODE NEXT * O(X07) CHARACTER
OCA NEXT * O(X07) CHARACTER
SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]As a second guess, the terminator changes or goes missing at some point in the data file. If you are running on *NIX, try wc -l data_file_name. This will give a count of the number of lines (delimited by CHR(10) ) that are in the file. If this is not close to the number you expected, then that is your problem.
You could also try gradually working through the data file loading 100 records, then 200, then 300 etc. to see where it starts to fail.
HTH
John -
Maximum record length in internal table?
Is there a maximum record length in an internal table? Please note: My question is NOT related to table space. I'm referring only to the length of an individual record (A.K.A. row length).
I am using a work area to insert data into an internal table. Both the work area and internal table are defined by the same structure.
The structure has a total length of 672 bytes. For the sake of this discussion I'll point out that at the end of the structure, bytes 669, 670, 671, and 672 are four separate fields of 1 character each.
When viewing the work area record in the debugger I'm seeing all the fields and all the values. When viewing the internal table in the debugger after a record is inserted, the internal table ends with the field defined at Byte 670. The internal table does not include the two fields defined at Bytes 671 and 672.
Am I to assume from the above explanation that the length of a record ( A.K.A. row) in an internal table cannot exceed 670 bytes?
Thank you.Manish,
False alarm! While, technically, you didn't answer my question, your request for code ended up helping me answer my own question.
To provide you with some code I wrote a simple test program using the record layout referred to above, with a DO loop to put some records into the internal table, followed by a LOOP AT, with accompanying WRITE statements to display the contents of the internal table and demonstrate that the last two fields weren't being stored.
However, when I ran the test program, the last two fields were being displayed.
It was at that point, when stepping through the debugger that I noticed the scroll arrows above the last column of my internal table that allowed me to scroll to the right and see my final two fields.
Apparently, because of the large number of fields in my internal table I had reached the default display length of the debugger. While I was obviously aware of the scroll bar found at the bottom of the display, I had never worked with an internal table of that width in the past and hadn't even noticed the scroll arrows above the last column before.
Thanks for taking the time to respond helping me get to the solution. -
Issue with row/column text lengths in report painter
Hi Gurus,
I have created a report painter report with formatting of the row/column length text as medium, but for one FS item/GL Account the report when executed still picks up only the short text length. I am not sure how this can be resolved.
Any ideas is appreciated.
Regards
SatishApplied OSS Note 360096 and it worked. Thanks for all your help.
-
I am trying to deploy an RDL file (5MB) to SQL Azure Reporting server in South Central US using the deploy function in SQL Server Data Tools but facing the following error during deployment to Azure Reporting server.
"There was an exception running the extensions specified in the config file. ---> Maximum request length exceeded."
Is there any limit on the size of RDL files which can be deployed to Azure Reporting server? I have seen some online posts which talk about increasing the maxRequestLength in httpruntime of web.config in Reporting server. But in case of Azure Reporting server
how can be make modification to this configuration?
I have tried to upload it directly to SQL Azure Reporting server from the Management Portal --> Upload Report function which still resulted in error.
Thanks & Regards, DeepThanks for your question. Unfortunately we are in the process of deprecating SQL Reporting services. Full details are available at http://msdn.microsoft.com/en-us/library/gg430130.aspx
Thanks Guy -
I have a File to IDOC Message Mapping Scenario:
Source Field Targefield
Communiication Address-(Email ID) E1EDK2 - TDLINE
Source Field length: 1/80 target Field length: Char\70
Mapping Condition:
Note: TDFORMAT = ‘=’ (Long Line), may need to create 2 TDLINE fields depending on length of text
So give the Solution for handling text Length exceed than target field lenght Using TDLNE and TDFORMAT......
Guide me and give Suggestions to achive this.Hi ,
Below is the generic sol for your problem .Graphical mappings wont workout for your problem while using sub string .
Input -->Input string
Length -->length of TDLINE
MESSAGE_V1,V2,V3,V4....depends on how many TDLINES you expect .Here I have taken 4 .
public void SplitbyLength(String[] Input, String[] Length, ResultList MESSAGE_V1, ResultList MESSAGE_V2, ResultList MESSAGE_V3, ResultList MESSAGE_V4, Container container) throws StreamTransformationException{
int lengthVal = Integer.parseInt(Length[0]);
int InpLenVal ;
for(int i=0;i<Input.length;i++)
InpLenVal =Input[i].length() ;
if (InpLenVal<=lengthVal)
MESSAGE_V1.addValue(Input[i].substring(0));
MESSAGE_V2.addValue(ResultList.SUPPRESS);
MESSAGE_V3.addValue(ResultList.SUPPRESS);
MESSAGE_V4.addValue(ResultList.SUPPRESS);
else if ((InpLenVal>lengthVal) && (InpLenVal <= (lengthVal*2)))
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,InpLenVal));
MESSAGE_V3.addValue(ResultList.SUPPRESS);
MESSAGE_V4.addValue(ResultList.SUPPRESS);
else if ((InpLenVal>(lengthVal*2)) && (InpLenVal <= (lengthVal*3)))
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,(lengthVal*2)));
MESSAGE_V3.addValue(Input[i].substring((lengthVal*2),InpLenVal));
MESSAGE_V4.addValue(ResultList.SUPPRESS);
else if (Input[i].length()>(lengthVal*3) && (InpLenVal <= (lengthVal*4)))
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,(lengthVal*2)));
MESSAGE_V3.addValue(Input[i].substring((lengthVal*2),(lengthVal*3)));
MESSAGE_V4.addValue(Input[i].substring((lengthVal*3),InpLenVal));
else if (Input[i].length()>(lengthVal*4) )
MESSAGE_V1.addValue(Input[i].substring(0,lengthVal));
MESSAGE_V2.addValue(Input[i].substring(lengthVal,(lengthVal*2)));
MESSAGE_V3.addValue(Input[i].substring((lengthVal*2),(lengthVal*3)));
MESSAGE_V4.addValue(Input[i].substring((lengthVal*3),(lengthVal*4)));
Regards
Venkat -
ADAPTER.SOAP_EXCEPTION:Maximum request length exceeded.
Hi frnds,
Plz look for the error i am getting when sending large record...
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PARSING">ADAPTER.SOAP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>soap fault: System.Web.Services.Protocols.SoapException: There was an exception running the extensions specified in the config file. ---> System.Web.HttpException: Maximum request length exceeded. at System.Web.HttpRequest.GetEntireRawContent() at System.Web.HttpRequest.get_InputStream() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() --- End of inner exception stack trace --- at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What could be the possible solution .
Thanks,
AdhirHi Ahdir,
First of all check the URL in your receiver SOAP adapter. The error comes from the web service server. It says that the request message is wrong.
U have to fill field SOAPAction in the receiver soap adapter
U may find the related information here
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
Please check this
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
There are multiple soap actions listed there.
Regards,
Divya
Maybe you are looking for
-
I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.
-
Every time I create a new folder, say on the bookmarks toolbar, like "REOPEN 6-13-14" and use the "Bookmark all Tabs" function to create bookmarks to reopen later, it creates a sub directory in the new folder called [Folder Name]. If I have 4 windows
-
Is dynamic tab possible ?
Hi Experts, I have got a requirment where I am designing screen in module pool purpose of this program is to take input from user and save in table. Based on the functional location(FL) there can be different no of Equipment if for a FL there is 3 e
-
Can't assign a song in my music library as a ringt...
Hi I have a N97 mini, i had problems with the library being corrupted follwed the advice given here seems to have worked. Music library works fine but now when i want to assign a song as my ringtone the folders are empty and shows no music at all. Wh
-
After download the Apple updates for printers for OS 10.6.8, I cannot get the Adobe plugins in my browsers to work. Safari will open but it has a cross hatch over it making it unreadable. Other browsers will not open pdf files. None of them will s