MAXIMUM TIME FOR 4.7 DVD CONTENT?

I am trying to fit 6 hours of edited DV on one single sided 4.7 DVD. I know there are some consumer transfer machines that will convert this length but can it be done with Compressor? I usually run one pass CBR but it will only fit 174 minutes at 2.0 Mpbs. Thanks!

I don't know if Compressor will allow you to go this low, but I calculate a video bit rate of 1.5mbps (1497kbps) and an audio bit rate of 192kbps in AC3 format ... and no menus or extras.
-DH

Similar Messages

  • Maximum time for a podcast

    What is the maximum time garageband allows to record a podcast?

    Just want to say thanks! Tried to podcast tonite, had tempo at 120 bpm, and found it only recorded to 33:16. Thanks again for the tip, I will know now next week to set the tempo lower.
    Brad

  • HT3775 What the maximum time for quicktime video if you want to export it?

    What is the maximum time I can record a video clip on iphone 3gs that I want to export to macbook pro?

    The duration of the recording would be based on how much free space available.
    On the iPhone go to Settings / General / About to see the available memory.

  • Running FF12.0, how can I set maximum time for History Storage? What's the maximum time?

    Previous versions would allow me to set storage time up to 1 year, I think. Now I can't find the path to set this time. I would like to set it to as much as possible.

    Firefox 4+ versions do not have a time limit for the history.<br />
    Firefox determines automatically how many pages can be kept without affecting the performance.<br />
    You can see the current value via the read-only pref places.history.expiration.transient_max_pages on the about:config page.<br />
    You can reset no longer used browser.history_expire_days* prefs from older Firefox versions, if you still have them, to remove them on the next start.
    See Marco Bonardo's blog about this:
    * http://blog.bonardo.net/2010/01/20/places-got-async-expiration
    *Precise Clear History: https://addons.mozilla.org/firefox/addon/precise-clear-history/
    *Expire history by days: https://addons.mozilla.org/firefox/addon/expire-history-by-days/

  • How Do I Detemine Maximum DVD Time For A PCM Audio DVD

    I have been working with my CS2 Premiere to create some auto play, audio-only DVDs that are autoplay.  To clear the air, yes I know that CS4 will permit 24bit-96 kHz.  For the time being 16 bit-48 kHz will suffice as it has CD quality  The bonus that a DVD format provides a greater playing times.  So the object is to make a PCM audio only DVD.
    Here is my problem: How to get really long playing time.  I know I can make high quality, 2-channel (ordinary stereo)  DVD-A's up to 3 hours using Minatonka Bronze.  Unfortunately, DVD-A discs are worthless as they cannot play in 90% of DVD players, but they prove the time point.  I would think that one should be able to make a conventional DVD, but with the PCM sound format of that same length.
    I just finished one that fit with a 103 minute, 16/48 stereo audio file of 1.11 GB size.   I also had a video file that I created using several photos. Sorry, don't have the final video file size.  I erased it all from my computer.  However, the final disc size was 3.754 GB.  A little extrapolation suggests a maximum DVD length of 119 minutes.  That with simple video and PCM audio.  Now, can one make a similar DVD with 150 minutes?
    I had three 48 kHz files that I created in Adobe Audion.  They were 1.599, 0.911, and 0.974 GBs in size.  That added up to 3.480.  The playing time is about 2:30 Hours; quite a bit less than 3 hours.   I tried burning a DVD with these, audio-files-only.  I checked lowest quality video, used no video, and got an Export To DVD error that I had "insufficient" space on the 4.7 GB disc!  So, I used the two latter files, which added to only 1.884 GB.  Premiere did not baulk, and it successfully burned a DVD that played.  Then I added the 1.599 GB file, and, once again, it produced an error.  This was clearly not going to work.
    At this point, I realized that Audition had done what it liked to do: It had saved the 16 bit-48 kHz files as 32 bit-48 kHz!  So, I went back to Audition and used EDIT to change the files to genuine 16 bit-48 kHz files.  When I opened them in Premiere, Premiere reported 16 bit-48 kHz files.  Their sizes were now, 0.799, 0.456, and 0.487 GB.  Please note that this totals 1.742 GB.  This is less than the 1.884 GB I had successfully used before.   Once again, I was getting the "insufficient" space error.
    I searched the CS2 Premiere manual and its index, but cannot really find any way to calculate maximum times, or squeezing the most out.  So, anybody got some ideas?
    Mike

    When working from DVD-Videos, this ARTICLE might be helpful - All VOB's (the container for the MPEG-2 files in a DVD-Video) are not created equally.
    Most DVR's write a VOB 01, that is not up to the DVD-specs. That can create a problem for PrE (and also PrPro), and if you have issues, please do follow Neale's advice.
    Good luck and welcome to the forum.
    Hunt

  • Maximum size for an HttpRequest? Set Content-Length?

    Hi, I'm managing to get small strings sent from my applet to my servlet, but when I try anything bigger, I get problems. Oddly enough, the larger object can get sent to my applet from my servlet without any issues.
    Can anyone tell me if there is a maximum size for sending responses?
    Or, if I have to set the content-length property in my applet before I send my data, how do I get the size of my object so I can set it?
    thanks for any advice any of you might have

    Thanks for the pointers.
    BalusC, at first I was trying to write my object without sending it through a byteStream first (hence the q) :), tried it that way too and wouldn't work.
    I finally figured out that it wasn't the code that was the problem, but it was an upload issue (server specific). Have changed the code to sending one line of data at a time since I was converting my object to an output file in the servlet anyway. Not the best solution but it works :)
    Thanks again

  • Maximum Time Trigger Email for Informatica Job

    We just start implement the job event notification in Tidal.
    We are in Tidal 5.3.1 with informatica adaptor. We set up the max and min time for the Job.
    I set up the Tidal event trigger that came out from the box - "Job running longer than its maximum time".
    associate with the email action for that event
    However, somehow even the job execution didn't exceed the maximum time we set up in the definition. It still triggers the email....
    And most interesting is the finish time doesn't match with what show in Tidal and the total runtime is always 60 seconds.
    Does anyone have similar issue ?
    Karen

    Hello Sampath,
    Note 553953 explains in details how to monitore specific jobs. After that you should configure the autoreaction metohd as described on the following online help:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/content.htm
    And finally, you should assign this method to the MTE in:
    RZ20
    SAP CCMS Monitor Templates
    Background Processing
    System Wide
    Background
    Background Job Monitoring
    <the job name>
    Select the Status one and click on Properties -> Methods and assign the method you have created.
    Regards,
    Tiago

  • Maximum time/size limit for Beehive Conference recording

    Hi, What is the maximum time/size limit for Beehive Conference recording?
    Thanks
    Chinni

    Looks like I found the probable location of this size limit.  Looking at the web.config file in the
    ExchServer\ClientAccess\Sync folder there is an entry for "MaxDocumentDataSize".  THe value is currently set at 10240000:
    <add key="MaxDocumentDataSize" vaulue ="10240000">
    So this is 9.75 MB or there about, which sounds about right.  I will try increasing this limit at some point to verify.
    Can anyone confirm this?

  • Tell me the perameter to set maximum gui auto logout time for limited users

    hi gurus...
    i want to know the perameter to set the maximum gui auto logout time for limited users...
    at present i have auto logout time as 30 minutes..but i need to set the value as 10 minutes for some group of user...
    if any one know any perameter plz let me know..
    thanks in advance,
    chaitanya...

    Hi Chaitanya,
    I don't think theres a specific parameter to achieve this, but you can set the value of rdisp/gui_auto_logout to 10 in one of the instances and create a new logon group for this users.
    Hope this help!
    Juan
    Please reward with points if helpful

  • Is there a file browser which can play DVD contents from Time Capsule?

    Using File Manager (free Zheng) app I can reach all my files on the Time Capsule (3TB) from my iPad Air2 (64GB). Also I am able to play video content MP4. So far so good.
    However I have also several DVD VOB files of homevideo. These I can play on my iMac using DVD player or VLC.
    Is there a way to play the DVD content just as easy as the MP4 files do on my iPad? Most file browser do not support this.
    I have read a solution to perform it via a server via my iMac. However this is not to my liking.
    Should it be possible to re-direct a file URL to lets say VLC player like Stratospherix filebrowser can do?
    Is there a good file browser which can play VOB DVD contents?
    Can anybody help me before buying several apps and perform the trial and error method ?

    I'd recommend File Explorer (orange icon on the iOS app store) - find your NAS with it and try and play your media. It has a video decoder built in so should be able to handle your MP4s. If not, Plex is very good - but would require £2.99 and your Mac to be on when you wanted to watch on your iPad. Let me know how you get on.

  • 3rd time trying to download additional content for mainstage....takes 15-20 hours each time...then asks for my password/id for permission...starts installing and about 1/4 of the way..it dissapears and nothing is installed....confused and frustrated..:-(

    3rd time trying to download additional content for mainstage....takes 15-20 hours each time...then asks for my password/id for permission...starts installing and about 1/4 of the way..it dissapears and nothing is installed....confused and frustrated..:-(

    aerol wrote:
    Are you trying to install all the content options at the same time?  If so, have you tried to install them one at a time?
    Yep.... this worked fine for me
    CCT

  • I need import dvd content to compressor or FCP to re encode for web

    I need import dvd content to compressor or FCP to re encode for web
    Is there a short cut?
    When I tried, only the video went as the audio seems to be embedded. How can I encode a DVD to and Mpeg4 file with the audio?
    Thank you all in advance.

    Google MPEG Streamclip. It's free and works! This questions gets asked a lot. Take advantage of search when you can.

  • Default maximum run time for updates

    Is there a way to change the default "Max run time" for each update? In SCCM 2007 the default run time was 20 minutes per update, now it is 5 minutes. I have machines that repeatedly fail to install updates because the max time of 300 seconds was
    reached.

    Hi,
    What is the powershell command to change the maximum run time?
    Thanks.
    probably this:
    http://technet.microsoft.com/en-us/library/jj850138(v=sc.20).aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Maximum allowed run time for a task sequence

    I found if i left the maximum allowed run time for a task sequence with a defualt value of "0" in configuration manager 2012 r2 cu2,the required task sequence would never run without a maintenance window larger than
    12H.
    At client side,the servicewindowmanager.log always said this required task sequence had a maximum runtime of 43200 seconds(12h).
    servicewindowmanager.log:
    OnIsServiceWindowAvailable called with: Runtime:43200, Type:5
    Program cannot Run! Setting *canProgramRun to FALSE
    There does not exist a Service Window of this Type, for this duration. The Program will not run.
    If i set maximum allowed run time to 120 minutes,task sequence would run under a 3h mainenance window.
    So if you leave the maximum allowed run time for a task sequence with a value of "0" then client agent will evaluate it as 43200(12h) for a required deployment,is it true? have i missed something?

    Hi,
    That is correct it will default to the same value as a program with a "Unknown" maximum runtime value, Unknown is also evaluated to 0 = 12h so that is correct behaviour.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Maximum Rows for series in Charts (Cluster Bar Charts)

    Question
    Is there a way to dynamically define the "Maximum Rows" value for all the series in a cluster bar chart? I tried putting "&item_name." into the "Maximum Rows" field for a series, but get an Application Builder error indicating that the value should be numeric. I would like to set the "Maximum Rows" for all the series in a chart "on the fly".
    Details
    I have one horizontal cluster bar chart with 4 series on my page that has a variable number of rows i.e. the number of bar clusters that I want plotted varies based on the user's criteria. For one set of data there may be 10 clusters. If the user changes the criteria, the chart could then have 20 clusters. I have the "Maximum Rows" field for all 4 series in the chart set to 31 rows.
    The Problem
    The chart with only 10 clusters is two thirds whitespace. The 10 clusters fills up the bottom third of the chart. The top two thirds of the chart is blank. The chart with 20 clusters fills up the chart with no whitespace. The chart with 40 clusters gets the top 10 clusters cut off and only displays the bottom 31 clusters.
    Any Suggestions
    If you have any suggestions how I can accomplish this, please post them. Currently I am not interested in going outside of HTML DB. I may end up doing that though to get a more dynamic charting tool.
    Thanks,
    Mike

    Note 367711.1 deals with this issue. The contents of the note are the below:
    At this time, this is not possible to dynamically set these charting attributes, however, an internal enhancement request has been created requesting that this functionality be incorporated into the product. The current plan is to incorporate this feature into 3.0 version of the product, however, this is just the current plan and can change depending on the complexity of the implementation.

Maybe you are looking for