Maximum usage percentage limit for tablespace ?

Hi All,
Is there any maximum or warning limit for the tablespace usage limit ? Below is the example from our system:
In DB02, PSAPSR3DB : Total percent usage is now 86%. Is that a warning or any maximum limit available ?
Please provide links or notes for further information.
Kind Regards
Shiva

Hi All,
Issue now resolved. Helpful SAP Note 706478 - Managing growing basis tables.
Regards
Shiva

Similar Messages

Maximum time/size limit for Beehive Conference recording

Hi, What is the maximum time/size limit for Beehive Conference recording?
Thanks
Chinni

Looks like I found the probable location of this size limit. Looking at the web.config file in the
ExchServer\ClientAccess\Sync folder there is an entry for "MaxDocumentDataSize". THe value is currently set at 10240000:
<add key="MaxDocumentDataSize" vaulue ="10240000">
So this is 9.75 MB or there about, which sounds about right. I will try increasing this limit at some point to verify.
Can anyone confirm this?

Maximum usage of hardware for Illustrator CS6

What are the maximum usage of Graphic Card, Processor and RAM which Illustrator CS6 can run up to?

Irrelevant. Sorry, but long before AI will max out any contemporary hardware it will crash for a million other reasons and most calculations run single-threaded, so it doesn't even make a blip on your CPU performance graph. AI is an arthritic old lady pretending to be younger with heavy makeup and a fancy dress, but beneath can't deny its ailments.
Mylenium

Credit Management - Maximum time overdue limit for open item

Dear all,
I've this scenario to configure for automatic credit control. A customer is billed on Jan 22nd '10 and now the account receiveable shows an open item. This customer is allowed 52 calendar days to make payment for this invoice, hence no credit block yet. As such, the customer can still make orders.
In my existing configuration, I've already enable "static" credit check on "open orders" and "open deliveries". The static check is to check against the customer's credit limit.
So, if I were to add in the earlier mentioned overdue open items check, is it sufficient to just maintain the field "Days oldestItem" with "52" within the automatic credit control screen?
Thanks.
Steven

Hi
The sytstem will shows oldest open items depending on the payment terms from the invoice date.
Once it crosses the days of payment then it will show in oldest open items
if you want to extend some more days for that then you need to maintain the days in "Days oldestitem" the automatic credit control area
Prerequisites for credit management to work in Sales and Distribution:
1.Assign credit control area to company code
2.Maintain the credit limit in FD32 with details of risk category and the credit limit value
3.Do the settings in OVA8 -automatic credit control area with combination of Credit control area/Risk category /credit group.
4.Assign the credit groups to the sales and delivery document types.
5.Maintain the Subtotal 'A' in the pricing procedure against which value the sytem should check the credit limit.
If you have any further clarifications on above let me know
Regards
Damu

Payment/Credit Limit for Vendors

Hi SAP Gurus!
Is it possible to impose a maximum payment/credit limit for Vendors in SAP?
I saw in this forums that it can be done through Contracts but in the contracts, you have to enter a material. Is it possible that you don't have a material and the contract will encompass all the transactions of the vendor?\
Hope to hear from you soon!
Thanks in advance.

Hi,
You can make use of following Features of Contract w/o materials;
Item Categories in Contracts: -
Just as with purchase orders, you can enter an item category to define the item as an external service item, a consignment item, a subcontracting item or as a free-form text item.
Item Category M (Material Unknown)
Item category M is for entering contract items without specifying the material number.
Item category M is recommended for similar materials with the same price but with differing material numbers.
Example
Consider a contract item for different types of office paper. The various types of paper have the same weight, quality, and price. However, they differ in the following respects: One type is lined, another is unlined, and another has two holes on the left side for filing purposes.
How Do You Use Item Category M?
In the case of items of category M, you enter the short text (short description), target quantity, unit of measure, and price. As soon as a contract release order is created, the material number or a short text is entered (e.g. the exact type of paper, say, two-hole punched). The system determines the net price on the basis of the gross price entered, less any discounts.
Item Category W (Material Group)
Item category W allows you to enter a material group without entering the value or quantity of the contract item. Item category W is for value contracts only.
Example
Consider a contract for cable. The contract covers every type of cable on the vendor's price list. The exact type of cable is known only at the time a specific cable is ordered.
Instead of entering an item for every type of cable the vendor is able to supply, you could enter item category W and the material group (say, CABLE). The short text would indicate that the contract item covers all types of cable supplied by the vendor.
Each release order issued against this contract would then specify the actual type and quantity of cable (for example, double-shielded coax, 1 spool) as well as the price.
How Do You Use Item Category W?
When you create the contract item, enter the item category W, the short text, and the material group. You do not enter a price or conditions for the item. However, it is possible to specify conditions in the document header. For example, you can enter a discount in the header conditions if the vendor grants a discount on all Pos relating to the contract. The discount is automatically taken into account when the release order is created.
You can enter a material number in the contract release order. The corresponding material master record must be assigned to the same material group specified in the referenced contract item. If the release order does not have a material number, then it must contain a valid account assignment, such as a cost center.
Also refer following link;
[Item Category/Account Assgt. Category in Contracts|http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm]

Can I set a time limit for usage on a 5th gen ipod touch

My daughter just got a 5th gen Ipod touch. Of course she is using it at times she shouldn't be. Is there a way to set a time limit for usage so she can be responsible for monitoring herself without us nagging all the time?

IIt's free and here is a link https://itunes.apple.com/gb/app/parentkit-parental-controls/id600618138?mt=8

An global maximum amount limit for single payments made via the ACH

Hi
Can any one guide how to config the gobal maximum amount limit for a single payments made via the ACH (Automated Clearing House) network.
Pl do the needful.
thank you.

Hi Tony,
Not exactly the solution, but going forward you can try split the invoices and process it separately at the time of invoicing itself. Otherwise you can try the option installment payment terms, but there may be at least one day difference in payment.
Warm regards,
Murukan Arunachalam

How to maintain minimum price limit and maximum price limit for a condition

Hello Gurus,
Goodmorning,
How to set minimum price limit and maximum price limit for a pricing condition type where we will do this ?, is it possible to set in VK11 ?
Note- I can see minimum and maximum setting in condition type pricing - in SPRO but not seen anything in VK11 condition record maintaince . so how to maintain in condition record( VK11-Minimum limit price and Max limit price )
Looking for your inputs
Thanks in advance
Regards
Venkat

hi,
in VK12
select the condition record - goto blue ladder icon
there you can maintain scales
like lower limit and upper limit.
balajia

Max limit reached for tablespace in SAP BW

Hi Friends,
We are having one SAP BW system on DB6, AIX...in that the max limit for tablespabe is 512GB, which is going to be exceeded soon...
So it is planned to move some tables from tablespaces of aggregates i.e. FACTI, FACTD into new tablespaces...
How can this be achieved?
Thanks & Regards,
Kunal Patel.

He Kunal,
As mentioned by Jens, you can use the DB2 9's Large RIDS (Larger Record Identifiers) support which significantly increases the size limit for table space. SAP has a tools to do the conversion for you - OSS Note 11058956 (ABAP tool for activating large RIDs).
Regards,
-Beck

Maximum Day Limit for OCP

Hi,
I have cleared the exams 1Z0-001 Introduction to Oracle: SQL and PL/SQL & 1Z0-023 Oracle8i: Architecture and Administration in the year 2001.
Now I have cleared 1Z0-024 Oracle8i: Performance Tuning this month.
My doubt is will I be able to become OCP 8i DBA if I clear the exams 1Z0-026 Oracle8i: Network Administration & 1Z0-025 Oracle8i: Backup and Recovery or need I do 1Z0-001 & 1Z0-023 again to become OCP.
I would like to know whether there is a maximum time-limit for completing the 5 papers of OCP 8i DBA.
Thanks & Regards,
Sumughan.

Looking at the source for 1.6.0_15 the default is 8192 and, other than the buffer size being greater than zero, there are no other constrains on the size so the limit will be the largest positive integer. Of course you may well run out of memory trying to allocate this amount of memory but ...

PRVF-4354 : Proper hard limit for resource "maximum user processes"

Dear All,
I am trying to install oracle 11g release 2 on solaris 10 operating system with x86 64 bit architecture for testing purpose.... I have completed all prerequisites for the installation but i am facing the following error..
if anybody can guide me how to resolve this issue..
Hard Limit: maximum user processes -
This is a prerequisite condition to test
whether the hard limit
for "maximum user processes" is set to at least 16384.
Expected Value : 16384
Actual Value : 16341
List of errors:
PRVF-4354 : Proper hard limit for resource "maximum user processes" not found on node "db1"
[Expected = "16384" ; Found = "16341"] -
Cause: Hard limit for the resource does not meet the requirement on the specified node. -
Action: Modify the resource limits to meet the requirement.

Hi all,
in my open source project I am doing the Solaris kernel modification with the following commands:
# RAM_MB=`prtconf |grep Memory|awk '{print $3 }'`
# echo $RAM_MB
3072
# SHMMAX=`expr $RAM_MB \* 1024 \* 1024 \* 70 / 100`
# echo $SHMMAX
2254857830
# projadd -U oracle user.oracle
# projmod -s -K "project.max-sem-ids=(priv,100,deny)" user.oracle
# projmod -s -K "process.max-sem-nsems=(priv,256,deny)" user.oracle
# projmod -s -K "project.max-shm-memory=(priv,$SHMMAX,deny)" user.oracle
# projmod -s -K "project.max-shm-ids=(priv,100,deny)" user.oracle
# projmod -s -K "process.max-file-descriptor=(priv,65536,deny)" user.oracle
# echo "set max_nprocs = 30000" >> /etc/system
# echo "set maxuprc = 16384"     >> /etc/system
# init 6furthermore you can check the current max allowed user processes with a command like:
# kstat |grep v_maxup
        v_maxup                         16384
        v_maxupttl                      29995Cheers,
David
OCP 9i
http://www.oratoolkit.ch/otn.php

We have just gone over our limit for data usage this month. Is it possible to add data just for this month?

We have just gone over our limit for data usage this month. Is it possible to add data just for this month?

YES. YOU GOING TO DO A PLAN CHANGE. WHEN IT GIES YOU DATE OPTIONS YOUR GOING TO BACK DATE IT TO BEGINING OF CYCLE. ONCE THAT GOES THROUGH DO ANOTHER PLAN CHANGE BACK TO IRIGINAL PLAN AND FUTURE DATE TO BEGINIGN OF NEXT BILL CYCLE. THIS ALL CAN BE DONE ON MY VERIZON OR IF YOU FEEL SAFER CALL CUSTOMER CARE AND THEY CAN DO THSI FOR YOU

Why is there a 30 day limit for email on the Playbook

Sorry this isn't really a support question but I was wondering if anyone knows why they maintained the maximum 30 day limit on email etc for the Playbook. I kinda understand the logic for a phone (although it would be nice to have the option of all my mail) but I use my playbook differently and really need all my mail not just the last 30 days.

Thanks so much for the best of all of your choice by email again then we will not receive this email is not responsible or so of this tag only one I have been the best time for your help and the next level of risk from you again and learn how much you owe.
Yep, the above is seekrit code explaining the why part. If I tell more they might harm me.
Enjoy the playbook.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Maximum hard drive size for 350 MHz slot loading?

Hello,
What is the maximum hard drive size for a 350 MHz slot loading imac?
I am aware of a 128 GB limit on imacs. Does the 128 GB hard drive limit apply to all imac CRTs or just the earlier models?
Here are the specs of my imac:
Blueberry 350 MHz
Slot loading CD-ROM drive,
6 GB hard drive
Is the maximum hard drive size limit of 127GB apply to this particular model?
Thanks

Yes, the last CRT iMac was in 2001. The first machines with built-in greater than 127 GB support were released in June 2002, as this article explains:
http://docs.info.apple.com/article.html?artnum=86178
So all CRT iMacs have that limiation.
http://support.apple.com/specs/imac/
The 8 GB limit is explained here:
http://docs.info.apple.com/article.html?artnum=106235

What is the upper limit for a table to have records

Hi all,
I am having table like this.....
CLIENTPCLOG (
     LOG_ID                                   NUMBER(10)          NOT NULL,
     CREATE_DATE                              DATE,
     CREATE_USER_ID                         NUMBER(10)          NOT NULL,
     EDIT_DATE                              DATE,
     EDIT_USER_ID                         NUMBER(10),
     DELETE_DATE                              DATE,
     DELETE_USER_ID                         NUMBER(10),
     DELETE_FLG                              NUMBER(1)          NOT NULL,
     LANGUAGE_ID                              NUMBER(10)          NOT NULL,
     LOG_TYPE_ID                              NUMBER(10)          NOT NULL,
     LOG_DESCRIPTION                         VARCHAR2(1000)     NOT NULL,
     MODULENAME                              VARCHAR2(100),
     MAC_ID                                   VARCHAR2(50),
     FC_ID                                   NUMBER(10),
     CLIENT_LOG_ID                         NUMBER,
     SERIAL_NO                              VARCHAR2(100),
     CONSTRAINT FK_CLIENTPCLOG_LOGTYPEMASTER FOREIGN KEY(LOG_TYPE_ID) REFERENCES IES_IESDC3_FINAL_TEST.LOGTYPEMASTER (LOG_TYPE_ID) DISABLE NOVALIDATE ,
     CONSTRAINT PK_LOGMAINTENANCE PRIMARY KEY(LOG_ID)
          USING INDEX TABLESPACE TB_UCPS_JAP LOGGING PCTFREE 10 INITRANS 2 MAXTRANS 255
               STORAGE(INITIAL 64K NEXT 0M MINEXTENTS 1 MAXEXTENTS UNLIMITED
                    FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT )
TABLESPACE TB_UCPS_JAP LOGGING PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
     STORAGE(INITIAL 64K NEXT 0M MINEXTENTS 1 MAXEXTENTS UNLIMITED
          FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT )
Is there any limit for records to be inserted in this table...? We are testing performance test and inserted records to this table. So please advise on this.
Thanks in advance,
Pal

It is restricted only by the space on your disk drives.
See more
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/limits003.htm#sthref4186
Gints Plivna
http://www.gplivna.eu

Maximum usage percentage limit for tablespace ?

Similar Messages

Maybe you are looking for