Maximum Video Size in Flash??

Hello,
I'm currently working on a website design. The idea is a big chromakeyed interactive video in Flash. The size of the video is 1080 (width) x 1500 (height) pixels.
I've exported the video in After Effects with the standard settings for flash (File>Export>Adobe Flash Player(SWF)). Now when I import the video in Flash and preview the file, the video plays in a slower speed and it's not playing smooth at all...
Is the video too big? Is there a maximum video-size to keep the video running correct in Flash? Is it something else that causes this problem..???
I hope one of you guys can help me with this, hope to hear from you soon!

Could be a mismatch of frame rates. For example, if you are using 30 fps in AE and 24 in Flash, and then you embed the video into the time line, it will play at 24 fps, slow and jerky.
However if the video file was a .flv and you played the video by NetStream or FLVPlayback, it would playback at 30 fps, even if the Flash doc had a fps of 24.
If that doesn't fix it, try exporting the file from AE as an flv.
Best wishes,
Adninjastrator

Similar Messages

Rendering .flv with cue points but maintaining video size

When I render an .flv by exporting in After Effects I cannot get cue points however when I import the .flv to a Flash doc, the controller is the same width as the video.
However, in order to get cue points, you have to add the video to the Render Queue in AE in order to see the cue points in Flash. But the video controller ends up wider than the video itself when imported to Flash.
My video is 495 wide by 360 high. When I render in AE in the Render Queue, and then import to a Flash doc, the video controller is about 30 pixels wider on both the left and right of the video. This looks goofy. Is their a way to resolve this?
Thank you.

Thank you for responding. I tried to but what happens is that that there is about 15 pixels of black space on the left and 15 pixels on the right side of he video. This does not happen when I export to Flash, only when I add to the Render Queue.
So If I adjust the video size in Flash, the video size changes however the black space still remains. Somehow AE is creating extra space black space on both sides of the .flv. Again, this does not happen when export to .flv.

Flash Video Size

Hello,
I am looking for a general rule of thumb for flv video within
Captivate 2.0... here goes...
If one is using flv format to progressively stream video,
what is the recommended maximum file size for optimal download
using DSL? Cable? Even bandwidth of approximately 400 kb up and
down.? I have not experimented with this much but I would like to
know what to avoid. Any suggestions or advice would be greatly
appreciated. Thanks!

quote:
Originally posted by:
auctioneer
I'm old fashion and still work with tables.
What? Learn CSS! Anyway...
Why are you using Flash? Just import the FLV into Dreaweaver.
If you need to use flash make sure to resize the stage, and use a
skin that goes OVER the movie, otherwise you'll need a bigger stage
to see it.
As always - publishing the file and posting the URL will get
you a much better answer then the guesswork used here.

Maximum video file size ...

Hi ... In iPhoto, is there a maximum advisable size for video files ?

Hi a brody,
Thanks for your comment. I am running iPhoto 9.1.3. Activity Monitor returns Intel as the type of process. No clue if it is 32 or 64bit.
How do I know if it is 32 or 64bit ?
Regards.

What is the maximum file size Flash Catalyst beta 2 can import?

I have designed the webpage in Illustrator cs2 and tried to import to Flash Catalyst beta 2 (FC), however it does not respond to me at all. I think maybe my AI file size is too big. Therefore I reduced my AI file down to 1 page only and now FC has no problem importing my file. I would like to know what is the maximum file size that FC beta 2 can import? thanks

In beta1 I believe the max size was 15megs, I am not 100% for Beta2 but I doubt they would have changed the amount.
I created an online menu for a fake restraunt for fun, the file was quite large with the high-res photos in it. How I got the whole file into Catalyst from Photoshop is I removed the large background images and then imported them individually into the Catalyst project.
Hope that helped

Will increasing the buffer size make flash streaming video stop stalling?

I have surmised all this on my own so it could be just a fantasy, but:
I am often the victim of slow internet connections. This means that when I try and watch streaming video it constantly pauses. It's my understanding that increasing the buffer size of flash would help prevent this but I can't figure out how to do that.
Thanks

You can pause the video just long enough for the player to load enough content. Most Flash player show a loading bar if you hover the player. For short pieces you can load the entire content before starting the play.

Maintaining original video size when importing into Flash

Hi All,
We've imported a number of videos for a client in order to
stream them via Flash. The problem we are experiencing though is
that flash seems to stretch the video height. For example, here is
the video on Youtube:
http://www.youtube.com/watch?v=q7EWMzIXQg8
which is fine
and here is the video imported into flash:
http://www.geofframm.com/movie/frommetoyou.html
We've tried adjusting the height/width settings, but to no
avail.
Any help greatly appreciated.
Best wishes
Dave

I am using captivate 3 and I get an error whenever I try to
export to flash cs3. unknown error.
why the hell doesnt Adobe say that flash is required to
export to flash BEFORE I buy the software? I am using my pc for
captivate, but am primarily mac based and was going to edit in
flash on my mac. but captivate didnt allow for me to export to
flash at all without any kind of flash installed. I installed a
demo version of flash, but the export is coming up with an error.
any ideas out there? adobe??? I'm currently using vista OS.
thanks in advance. r

What is an idea of maximum file size for a film in Captivate?

Hi there,
I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
Thanks in advance

Probably better guidelines that dictates 'size' of a vi are:
typically no more than 1 video screen in size
is it legible
and is it's function and operation clear.
I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Issue with video playback in Flash Player

I am currently doing some voluntary work for my mom for the local branch of the Alzheimer Foundation. Now I have encoded a video to mpeg4/h.264 and F4V using the Adobe Media Encoder only I am having not much luck to get it successfully played. Now is my question what could I be doing wrong? I already tried to use ActionScript 2 and 3 and disabled GZIP compression on the server and even tried different files like H.264 and F4V.
The strange thing is that the video always work just fine when being tested in Flash CS4 10.2 but when I tried it in the browser it fails. The Test Movie feature of Flash is using the following player version MAC 10,0,12,36. I am using 10,0,32,14 MAC in my Safari browser and their the movie plays fine once the file is fully downloaded (how can I change this?) only when let friends try it out which have version 10,0,32,18 or the same version it doesn't work for them. Also when I am using an older version doesn't seem to work. I thought that H.264 support was added in some version of Flash Player 9. One of the issues which I was getting that the video playback worked lovely in Test Movie with the below listed alzheimer.mp4 url but when testing after the SWF and HTML were uploaded to the webserver it failed to work and I was receiving a FileStructureInvalid error. Now I would expect that the video file would fail in Test Movie too when the video file structure is invalid.
I have tried the following video files both encoded with Adobe Media Encoder:
http://www.letslearn.it/dropbox/alzheimer.mp4
http://www.letslearn.it/dropbox/alzheimer08.f4v
The current player can be found at:
http://www.letslearn.it/dropbox/alzheimer.html
I have attached my As3 version of the Flash file which is normal easy video stuff.
Anyone happen to know what could be the issue here? I am getting desperate!

Yes, I have just used the normal Video-object together with the normal trick to load Flash Video files with it. Nothing special only with a full URL for the play()-method. I have attached the source code for your convenience. The original files are edited in Premiere Pro CS4 and are based on one original ripped DVD vob file and a newly created Quicktime-based slideshow animation which has then be edited into one using Premiere.
After that I have selected the sequence of the Premiere project which I have exported using File > Export which is using Adobe Media Encoder. For the encoding I haved used the Export Settings: "Format FLV | F4V", Codec On2 VP6 and then altered the video size and bitrate so that the file size gets smaller this is for the Alzheimer08.f4v file. The other file used the H.265 Web Medium profile with also the video size and bitrate modified after it got encoded and uploaded to my webserver.
The original files used by the Premiere Pro project are:
VTS_01_1.dv
Type: DV Stream
File Size: 2.6 GB
Image Size: 720x576
Average Data Rate: 3.4 MB/Second
Compressor: DV - PAL
Quality: Normal (3.00)
SLIDESHOW 2.mov
Type: QuickTime Movie
File Size: 3.2 GB
Image Size: 720 x 576
Average Data Rate: 3.4 MB/Second
Compressor: DV - PAL
Quality: Most (5.000)
Above information is obtained in Premiere Pro by selected Properties-option of the submenu when selecting the file.
Hopefully you can use this information but I could upload the original Premiere Pro project over the next few days. If you would be interested in it.
FLA file: http://www.letslearn.it/dropbox/alzheimer.fla

Maximum file size for export into MP4?

Hello,
I am not able to export 2 hour HD video into standard MP4 file. It seems that reaching 100% export algorithm gets into loop. I was waiting for hours and still had seen progress at exactly 100% with final file size on hard disk to be 0 bytes. I am using CS5 on MAC OS X. I had to split my timeline to 2 parts and to export them separately (which is embarrasing). Is there something like maximum file size for export? I guess that 2h video would have about 25-35GB.
Thank you
jiri

You are right.
So I am running AP Pro 5.0.4, Adobe Media Encoder 5.0.1.0 (64bit). Operating system Mac OS X ver 10.7.3. All applications are up to date.
MacBook Pro Intel i5 2.53GB, 8GB RAM, nVidia GT 330M 256 MB, 500GB HDD
Video is 1920x1080 (AVCHD) 25fps in a .MTS container (major part of timeline), 1280x720 30fps in .MOV container (2mins), Still images 4000x3000 in .JPG
No error message is generated during export - everything finishes without any problem...just file created has 0 byte size (as described above).
This is my largest video project (1h 54min) I dont have any other problem with other projects.
I dont run any other special software, at the moment of export all usual applications are closed so that MacBook "power" can go to Media Encoder. No codecs installed, using VLC Player or Quick Time.
Attached please find printscreen from Export settings (AP Pro). Writing this ppost I tried to export only the first 4mins from timeline where all kind of media is used...and it was OK.
As a next step I will try to export (same settings) 1h 30mins as I still believe problem comes with length of video exported.
Let me know your opinion

Maximum file size for Adobe air for Androind and iOS compiled apps

Hi All
I am working on a project which has a few videos which I need to bundle into my mobile app for an Ipad app I am creating using Adobe Air for iOS. My question is simple is there a maximum file size limit on apps compiled using Adobe air for iOS? And if so what is it? Any help would be great.
regards Mike

Hi. Im not a 100% sure this is correct. I am able to make a large .IPA file (200+Mb) and it will go onto my iPad 1, but it does not work - Just quicts after a few secs. If I run the same IPA on my iPad 2 it works.
When I take out some of the assets so its a smalelr size then it does run on the iPad.

Maximum file size for importing into Premiere Pro CS6

Hi,
I'm considering recording raw video, no compression at 720p, 30 fps for 20-30 min. This woudl result in a file that is close to 80 Gbytes. I'm wondering what the maximum file size for importing into premiere Pro is and if I need to split this file up into smaller pieces. Any recommendations on how I may deal with uncompressed raw video that is pretty long in length?
Thanks,
Serena

There is bound to be some limit somewhere in the program, but you should be well below that. The biggest issue might be whether your computer is up to the task of handling it. If you will post your computer specs., someone will give you comments on that aspect.
Good luck,
Hunt

Maximum File size on DMP

Hello,
Is there a maximum file size that DMP 4400G can support. We are trying to upload a 7GB MPEG file to the DMP with an attached 16Gb USB flash drive. However, it fails when it reaches 56% with an FTP error: ( "Unable to write data to the transport connection: An existing connection was
forcibly closed by the remote host.")
Is there a maximum file size that the DMP FTP daemon supports?
Thanks

I am not aware of any File size limitations in the DMP.
I tested with DMP-4400G running 5.2.
I created a 7GB file and used FTP (Filezilla) to upload file to
USB2 on the DMP.
The file transfered without issue.
I would suggest trying a different file and test
transfer again.
For Example:
(linux, OS X, unix)
command = dd
dd - create a large file for testing
Description
To create a 7 GB file:
# dd if=/dev/zero of=file_7GB bs=7m count=1k
Example
dd if=/dev/zero of=file_7GB bs=7m count=1k
* What FTP client are you using?
* What format type is file?
* What version of code on the DMP?
* What file format is used on the external USB drive?
* What manufacturer & model# of the flash being used?
Thanks
T.

HELP!!! layer 0 exceeds the maximum layer size allowed (DVD STUDIO PRO)

when I try to burn a dual dvd with 7.1 gb on it. The discs are 8.5gb dual dvd's, it says this in the error box.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.
I have tried to dual layer break point on a chapter half way through and other locations, but it still says it. What do I do???? I need to get this done ASAP!!!!! Can you please help, its kinda a emegency!!!!!!
please email me back at [email protected]
Thanks so much
G5 Mac OS X (10.4.6)

Hey timeline
welcome to the apple boards...
ill give you the easy fix, although i would recommend the proper fix.
first, build your project on any of your drives so you can see your audio and video TS folders.
once you see your build, then click on "Format" and before you click on format (on the lower right hand corner of the Format window, click on the second tab and under "Layer Break" click the drop down box and whatever is NOT greyed out, can be used as a layer break.
the more proper way do it it would require you to do some calculations based on the amount of video in your project and re-encode your video.
hope that helps
Mikey M.

Formatting was not successful. Layer 0 exceeds the maximum layer size

I am attempting to burn my first dvd w/ dvdstudio pro. I pressed burn. Processing took approximately 25 minutes. Everything seems to be goin well. The I get the following message,
"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
Can anyone help me out with this?
The following info was in the build log,
Starting DVD Build MUSICVIDEOMIXTAPE...
Compiler Initializing...
Precompiling Project MUSICVIDEOMIXTAPE
Compiling VMG Information...
Created 8 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Generating Transition: VTSM #01, VOB #1...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
2 VTSs and 2 Titles will be created...
Compiling VTS#1 (drivin me wild- Common & Lilly Allen)...
Muxing VTS011.VOB
Done.
Compiling VTS#2 (d12 vid mix tape)...
Writing VTS020.VOB
Muxing VTS021.VOB
Done.
Linking VMG...
Linking VTS#1...
Linking VTS#2...
Writing VTS#1...
Writing VTS#2...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘MUSICVIDEOMIXTAPE.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

It sounds like you are trying to burn a dual layer disc. Do you need a dual layer disc? (i.e., do you have more than 4.3 GB of material?) If you do then there is a tutorial at;
http://www.kenstone.net/fcphomepage/dual_layer_mediagary.html

Maximum Video Size in Flash??

Similar Messages

Maybe you are looking for