Maximum Wait for WS Consumer: SOAMANAGER Logical port

Hello Everyone,
I was trying to configure consumer proxy through SOAMANAGER transaction. When you create a Logical port, within Transport setting you can see a Parameter called 'Maximum Wait for WS Consumer' which as per my understanding is the time for which the consumer is required to wait for a response from Provider.
The problem here is i cannot edit that value. The field is disabled with its default value as '0'(wait for infinite amount of time). I want to make that wait period as just 10 secs.
Am i heading in the right direction? If yes, then how can i edit that value?
Regards
Shailesh

Hello Shailesh
You should be able to modify this parameter. See the link:
Configuring a Consumer Proxy
http://help.sap.com/saphelp_nwpi71/helpdata/EN/9e/c7a3591dc74a679bbc9716354e42af/content.htm
Are you able to modify any of the other parameters? Does your user have the required authorizations?
Regards
Mark

Similar Messages

Wait for Event FIPP - Completed Logically Deleted

Hi WF Experts,
We have a WF for Release of payments.
It has 1 Fork with 2 parallel branches (both necessary).
1 Branch has the approval process for Amount release and the other branch calling the Account assignment approval Subworkflow.
The approval process branch has the until loop with increment counter and it picks the agents within the loop until a loop condition is reached and thereby till no more approvals required.
The other branch, before calling the subworkflow, it checks a WAIT FOR EVENT FIPP->COMPLETED with container element FIPPID.
Both these branches needs to be completed so that the forks gets ended and the wf comes out of the fork.
The approval process branch is working perfectly. But in the other branch the WAIT FOR EVENT FIPP->COMPLETED gets logically deleted and thereby, this branch does not go firther to start the Account assignment approval Subworkflow. This way the Fork with the 2 necessary branches does not end, and thereby, the WF stops here and could not go further to set release indicators (Which is a backgorund task).This will confirm the end of WF process.
When I pass the WI ID for this Wait event in the SWIA, it shows the status as CANCELLED.
The WF User log as a whole shows the status as COMPLETED as all the approvers has approved the release.
Why is the Wait for Event gets logically deleted ?Please advice.
Edited by: Sameer Anwar on Jun 12, 2011 9:17 AM
Edited by: Sameer Anwar on Jun 12, 2011 9:21 AM

Dear Experts,
Any update on this . I am unable to sort this out why the Workflow is getting stopped.
-Anwar

Calling external Web Service: PI is looking for a logical port and proxy.

Hi,
My scenario is ECC Proxy -> PI -> External Webservice (WS adapter).
the Web service adapter fails with the error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>System error while calling Web service adapter: Error when initializing SOAP client application: 'error_text'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I debug the message processing, it is looking for a port in table SSRVRTCONFIG, finds it(entry created automatically when WS adapter and the corresponding receiver agreement is activated in ID.
Then the program looks for an entry in "SRT_CFG_CLI_ASGN" for a proxy and logical port combination and errors out.
to be able to call an external web service, do we need a proxy to be created? I tried to create but the proxy creation fails because the external WSDL has some unsupported tags.
Also do we need to do any other configuration in SOAMANAGER? I am assuming not because the Web service is external.
Any help would be appreciated.
Thanks
Vijay

I already checked that note and made sure that the points mentioned are met. I have a trace set up on the target system and would know if the call reaches them and then fails in authorization. Right now the call doesnt even reach the target system and also from debugging I know that the program is looking for a proxy and then fails.

Error in Logical port for Consumer proxy in SOAMANAGER

HI Experts,
While creating Logical port for Consumer proxy in SOAMANAGER I am facing problem
"SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL ".
Kindly suggest.

Hi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh

How to Assign Logical port for a standar Consumer proxy

Hello,
I'm working with a SAP application creating a WS Connector that ask me for the following data:
- Class name:
- Logical Port name:
As far as I have read SAP delivers for this application an example implementation for the following web service: ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In with the /BCV/CL_SIN_WS_BOM class.
And the help also says that We can find the example implementation delivered by SAP for the Web service ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In in the package /BCV/SIN_PRX, under Service Consumer /BCV/CO_PRODUCTION_BILL_OF_MAT
In se80 transaction under /BCV/SIN_PRX package I can find /BCV/CO_PRODUCTION_BILL_OF_MATERIAL consumer proxy.
As far as I know, I just need to assign a Logical port to this proxy.
So, I go to soamanager transaction under "Service-Administration" --> "Single Service Configuration" and find this Consumer proxy. Then, under Configuration tab I select "Create logical port" option but I need to fill an URL for WSDL access.
Where can I find this URL? I think that I need to provide de WSDL URL (end point) of the ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In Web Service but I can't find it on the soa manager. Or maybe I need to implement a WS by my own WB using the /BCV/CL_SIN_WS_BOM class?
I appreciate if someone could help me with these SOA concepts.
Thanks in advance,
Abigail.

Hi Abigal,
In SOAMANAGER , u can configure the logical port in 3 ways first it by WSDL and second by manually and third by PI.
1. WSDL based : URL will automatically determined using WSDL file.
2. MANUAlly : in this , we have to provide the URL .
Thanks
jitendra

Example wsdl and logical port for consumer proxy anyone ?

Hi,
Could please somebody give me an example of external WSDL file and logcial port created for the WSDL file in SOAMANAGER ?
I need to create manually logical port for my consumer proxy and I am missing something because my logical port is not active.
Any example is more than welcome.
I need to know how to populate fields manually on the following tabs based on the info in a WSDL file:
Consumer Security Additional Information Web Service Addressing Messaging Transport settings Message Attachments Operation specifi
Thanks and Regards
Agnieszka
The message, I am getting, when creating logical port is:
Operation 'SrtFmStatefulTf' not found [NS: 'urn:sap-com:document:sap:soap:functions:mc-style']
I think that maybe something is wrong with my wsdl.
Edited by: Agnieszka Domanska on Nov 17, 2010 5:41 PM

Hi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh

Error while creating logical port for Consumer Proxy in SOAMANGER

Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari Nambiar

Hi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar

Error while creating logical port for Reporting

Hi,
In one of the training materials for Duet Enterprise, i saw the steps for creating logical port for the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO.
When i am trying to create the logical port, i am getting an error saying,
" SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:500 Native SSL error
https://<server:port>/_vti_bin/OBAFileReceiver.asmx?wsdl "
I would like to know is it really necessary to create this logical port for "Reporting Scenario" and is it not created automaticallly using the Installation Wizard??
And in case it has to be created, how to resolve this SRT framework exception?
~ Ramanath.

Hi,
the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO was used in Duet Enterprise SP01. Now with SP02 the consume proxy /IWTNG/CO_OBAFILE_RECEIVER_SOA is created.
However, the SSL error that you are getting looks a little strange (it does not mean that there is an error, but it is worth checking):
So can you go to SOAMANAGER -> Service Administration -> Single Service Configuration. In here select "Consumer Proxy" from the "Search by", Search Pattern "/IWTNG/CO_OBAFILE_RECEIVER_SOA" and Field: Both.
You should find one entry. Select it and click "Apply Selection".
Now go to the Configurations tab. Here you should see one Logical Port with name "LOGICALPORTFORREPORTING" with Creation Type "Manually Created". In fact this logical port was created by the Wizard.
Click on Display and scroll down again. Now in the "Additional Information" tab there is a string after HTTP Destination, e.g. 0050568E3F5A1ED096F22339C44BAF83.
Copy this value and go to your SAP GUI -> Transaction SM59.
Here click on Find/Search and search for this HTTP Destination. You should find one Type G RFC Destination that has the target host of your SharePoint server and the path prefix /_vti_bin/OBAFileReceiver.asmx.
Now you can test the service. Just click on Connection Test. The result should be a HTTP Response: 200.
If not, then something went wrong with the automatic configuration and we should take another look at it (for example maybe the SSL certificate from SharePoint that was imported by the Wizard is not valid)
Regards,
Holger.
PS. Don't use the "Ping Web Service" test from SOAMANGER -- unfortunately this is not working consistently.

Error while creating logical port in SOAMANAGER

Hi,
Im consuming the webservice.While creating the new logical .Im getting the following error.
Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://vmtmasterdev.rune2emaster.rune2e.com:1080/sap/bc/srt/wsdl/sdef_Z_NUMBER/wsdl11/ws_poli
I have entered logical port name,description, URL for WSDL access.When i press enter i got the above eeror.
Please help me.
Regards,
Brahmaji

Hi,
tell me please wenn you run SOAMANAGER you have to apply an user Authentication or not?
If yes If the service that you want to configure is an Enterprise Service or Self-Modelled Service.
In case of Web Services Please Check again in The ICF Services under
sap/bc/srt/SAP and Check if your Service activated or not.
If you don´t have Access to SOAmanagement you can see the specified Roles hier
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/07074155bcf26fe10000000a1550b0/frameset.htm
Regards
A.Labrache

Unable to create logical port in SOAMANAGER

Hi All,
When Im tryign to create a logical port for my consumer proxy I get
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination.
Any clue what authrizations I need? I didnt get this error while generating the proxy from the wsdl and Im using the same userid/pwd.

Hi,
Even I get the same error.
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I found the note : Note 1240233 - Error when maintaining logical ports using SOAMANAGER.
Applied the note, still the same error.
Have this issue is resolved?
Any other solution?
Regards,
Sunil.

Error generating logical port in SOAMANAGER

Hi,
When generating the logical port in SOAMANAGER transaction I get an error message 'SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL'.
Does anyone know what the problem might be?
Thanks in advance.
Fernando.

Hi,
go to SICF transaction under /sap/bc/srt/wsil path, test the service and look for service provider you want to consume.
you get 2 links then test for logical port.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3
The link is constructed in the following way:
http://<host_name>:<port>/sap/bc/srt/wsil?sap-client=<sy-mandt>
or you can use transaction SICF then navigate to node /sap/bc/srt/wsil
and press "Test service" from the context menu.
In case there is a Service Registry in your system landscape to which the provider system is connected the profile-based endpoints could be found in that Service Registry as well.
you can follow note 1330545
/people/franklin.herbas/blog/2007/12/11/service-modeling-with-the-esr
/people/peter.mcnulty/blog/2008/02/04/service-implementation-in-abap
regards
nag
Edited by: welcomenag on Jun 25, 2009 5:56 PM

How to programmatically create a logical port to consume external webservic

Hi All,
I have created a logical port in soamanager transaction manually to consume a web service.
I have a requirement where I need to create this logical port programmatically,so that i can release the proxy class
of that web service and port will be automatically get created in all systems when the user uses it for first time in each system.
It will be helpful if you provide any method or function module which can do that.
Thanks in advance..

Hello,
Creation of Logical Port using LPCONFIG is explained in this link [http://help.sap.com/saphelp_nw04/helpdata/en/16/285d32996b25428dc2eedf2b0eadd8/content.htm]. It can also be created using SOAMANAGER.
Thanks,
Venu

Error in creating Logical Port in SOAMANAGER

Hello,
I create a consumer proxy for http://www.thomas-bayer.com/axis2/services/BLZService?wsdl. No when I am trying to create a logical port I am getting SRT Exception. I am able to open the link in IE. What shall I do to solve it?
Regards,
Ahmed

What type of SRT error you are getting? post complete message.
SRT error with unsupported xstream means service provider is returning non-xml message (HTML).
Please note I am able to get wsdl of this service but not the endpoint (HTTP return code: 500) so read documentation carefully if there is any additional requirement to access this service.
Regards,
Gourav

Logical port for client proxy

Hi,
when consuming a webservice i have to create a logical port and this port will be used when i create an instance of the proxy class e.g.
DATA: lo_proxy TYPE REF TO /ipro/co_bbp_cms_ibf_metadata.
CREATE OBJECT lo_proxy EXPORTING logical_port_name = 'E6S_300'.
The question is how could i know how the customer will name the logical port?
Is there a way to get a list of logial ports for a give proxy class?
Regards,
Christoph

the following table holds all the logical port for a given proxy class
SRT_LP
Regards
Raja

Client proxy consuming web service provider using logical port issue

Hi All,
I have a proxy client having a logical port (configured using NWDS) to consume a web service in the provider system.
In the logical port, I have given target address, and logical port name. While moving this client proxy NWDI dev track to Q and prod,
how do I change this target address to point to Q and prod respectively. In other words, even though I am using Visual admin to configure the destination url for the logical port, to point to Q and prod, its still referring to the dev environment provider service after moving the proxy client to Q and prod. What is the suggested approach to take care of this issue
Thx
mike

Hi Michael,
I can only help from that point of view that I believe this question belongs to the forum
Service-Oriented Architecture (SOA) and SAP
Please try to raise this question there.
Thanks and Regards,
Ervin

Maximum Wait for WS Consumer: SOAMANAGER Logical port

Similar Messages

Maybe you are looking for