MaximumDevicesReached for exchange server protocol 12.1?

Hi,
http://msdn.microsoft.com/en-us/library/ee218647(EXCHG.80).aspx says that MaximumDevicesReached is supported only on 14.1 exchange server. So, my question is, what is the error code sent by the server in case of 12.1 exchange server protocol?

Hi ,
By default exchange throttling policy supports maximum configuration of single account in 10 devices for active sync, In case if you try to configure that same account on the 11 th device you will face the mentioned error.
Better way is to delete the stale device partnership else you can change the throttling policy to allow max devices more than 10.
Thanks & Regards S.Nithyanandham

Similar Messages

Forefront for Exchange Server

Before upgrading to Exchange Server 2013 we were using Exchange Server 2010 with Forefront Protection 2010 for Exchange Server to protect our system from virus/ malware, it works effectively. After upgrading to Exchange Server 2013, the forefront Protection
2010 does not support Exchange 2013. I know that MS added anti malware function to Exchange Server 2013 but it does not work effectively.
So the question is: does MS has any other program instead of Forefront Protection 2010 which support Exchange Server 2013.

Hi,
You could have a look at Exchange Online Protection that hosted email filtering service.
http://technet.microsoft.com/en-us/library/jj723137(v=exchg.150).aspx
Best Regads,
Joyce

Half the engines are not updating wanted to update Forefront Protection 2010 for Exchange Server to newest sevice pack

Running forefront protection 2010 for exchange. The version of Exchange we are running is Exchange Server 2007 sp3 rollup 13. I am seeing that half our engines are not updating for forefront. Currently we are running version 10.1.0746 sp1 for Forefront.
I would like to get this up to the newest version which I think is SP2. Where can I download just the service pack 2 and will I have any problem with the version of exchange I am running. Thanks in advance for any help.
John

Hi,
I guess you are talking about Microsoft Forefront Security for Exchange Server.
You could have a look on the following blog.
http://blogs.technet.com/b/fss/archive/2009/12/10/migrating-from-forefront-security-for-exchange-server-to-forefront-protection-2010-for-exchange-server.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

If the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

if the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

thanks for your reply!
what's protection software can use for exchange server 2013?
Hi,
Most (if not all) of the bigger vendors has a product that supports Exchange 2013, so look them up.
Exchange 2013 has some Anti-Spam and Anti-Malware Protection functionality that you can read about here:
http://technet.microsoft.com/en-us/library/jj150481(v=exchg.150).aspx
Martina Miskovic

Renewal of Forefront Protection 2010 for Exchange Server until EOL

Hello,
We have a Open Value subscription for Forefront Protection for Exchange Server 2010 (FPE) running with an Exchange 2007 server and an Edge Server. We attempted to renew the subscription to FPE and were automatically upgraded to FOPE and now EOP.
Since FPE is not End of Life yet, might it be possible to renew FPE on premises until such time as the product goes End of Life?
thank you,
Dan

Hello,
FPE on premises was available only as a subscription license in OV, OVS. for subscription products thre is not possibility to renew th elicensing if is removed from product list.
you can purchase FOPE(in OVS) or EOP as online subscription. you can use also EOP for on premises Exchnage Server.
on Microsoft document we have th efollowing info:
The following are the primary ways you can use EOP for messaging protection:
In a standalone scenario   EOP provides cloud-based email protection for your "on-premises Microsoft Exchange Server 2013 environment, legacy Exchange Server versions,
or for any other on-premises SMTP email solution."
As a part of Microsoft Exchange Online   By default, EOP protects Microsoft Exchange Online cloud-hosted mailboxes.
In a hybrid deployment   EOP can be configured to protect your messaging environment and control mail routing when you have a mix of on-premises and cloud mailboxes.
note: EOP replaces Microsoft Forefront Online Protection for Exchange (FOPE). All FOPE customers will be transitioned to EOP, as described in the
Forefront Online Protection for Exchange (FOPE) transition center. EOP delivers the protection and control provided by FOPE, and also includes additional features.
What's new in Exchange Online Protection describes some of these features.
thanks
diramoh

Microsoft forefront protection 2010 for exchange server is unable to perform the requested function

I get the following error any time I try and change any setting:
Microsoft Forefront Protection 2010 for Exchange Server is unable to perform the requested function. This may be becuase Microsoft ForeFront services are unavailable. Ensure that all Microsoft ForeFront services are running and that Windows Powershell is
functional.
I have installed the latest rollup for SEP. Rollup 5 I think. I have rebooted the server. I have checked the permissions and they are correct.
Any thoughts?

I posted a PowerShell-based workaround in the other thread:
https://social.technet.microsoft.com/Forums/forefront/en-US/1ccb9a5e-4b08-4f6b-a4bd-32cf5f2cd2b0/cannot-save-any-changes-microsoft-forefront-2010-for-exchange-is-unable-to-perform-the-requested?forum=FSENext
Mike Crowley | MVP
My Blog --
Baseline Technologies

Spam notification on Microsoft Forefront Protection 2010 for Exchange Server

Hello
I'm using Microsoft Forefront Protection 2010 for Exchange Server on edge Exchange2010 SP2.
I did know I can't configure any notification for detected spam, because the result would be that the users inbox would be spammed with Forefront notifications instead of the real spam.
http://social.technet.microsoft.com/Forums/forefront/en-US/6c293ded-8e61-44a1-ac25-bb685ecd1c7c/notification-spam-forefront-for-exchange-2010
But I can't find the Forefront notifications in tracking logs.
Is it usual ?
if not, why the Forefront notifications was't send?
Thanks for any ideas.
Hiroko

Hi,
I checked smtp log of our Exchange server.
But I think I can't search the logs.
Could you please tell me the word of error on smtp
log.
Thanks for any ideas.
Hiroko

MSDN Exchange Server Protocols - Masrch 30, 2015

The Mar 30, 2015
release contains updates made to Microsoft Exchange Server Protocol and Standards documents.
Exchange Server Protocol Documents links
Landing Page:
Exchange Server Protocols
Full documentation set (ZIP) –
Microsoft Exchange Server Protocols Documentation
Exchange Server and Outlook Standards links
Landing Page:
Exchange Server and Outlook Standards Support
Full documentation set (ZIP) –
Microsoft Exchange Server and Outlook Standards Documentation
The following new specifications have been added:
MS-OXWSITEMID
The following protocols have been archived:
None.
The following known issues exist in this release:
None.

The Mar 30, 2015
release contains updates made to Microsoft Exchange Server Protocol and Standards documents.
Exchange Server Protocol Documents links
Landing Page:
Exchange Server Protocols
Full documentation set (ZIP) –
Microsoft Exchange Server Protocols Documentation
Exchange Server and Outlook Standards links
Landing Page:
Exchange Server and Outlook Standards Support
Full documentation set (ZIP) –
Microsoft Exchange Server and Outlook Standards Documentation
The following new specifications have been added:
MS-OXWSITEMID
The following protocols have been archived:
None.
The following known issues exist in this release:
None.

Expiration of "Subscription license of Microsoft Forefront Protection for Exchange Server"

We have "Microsoft Forefront Protection for Exchange
Server" running in the company. Now I face the expiration of "Subscription license of Microsoft Forefront Protection for Exchange Server".
I learned from
http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx that "... products will continue to be supported through that date (12/31/2015) in order to provide with customers sufficient
time to move to alternative solutions". My concern is, that Microsoft Forefront Protection for Exchange Server does not know about that grace period.
It claims:
Your Subscription license of Microsoft Forefront Protection for Exchange Server has expired. The product will continue to operate during the extended grace period
until 5/1/2013. Subsequently, scanner updates will be disabled and the product will operate with reduced functionality.
Is there a way to get a new license number? I called our software vendor, but Microsoft does not sell licenses anymore.
Thank you for your assistance.

Hi
We just talk about exchange deployment and configuration in this forum.
If you have any questions about licensing, please use the contact information in
here which would be the best place for seeking the answer.
Terence Yu
TechNet Community Support

MS Forefront Server Security for Exchange Server 2007 SP1 - License Expired - Unable to update

Hi
1. My Windows SBS 2008 Server Console shows:
Virus Protection for e-mail STATUS alert CRITICAL (Forefront Security for Exchange Server)
Details: None of the engines enabled for updates have been updated in the last week.
Forefront Security for Exchange Server SP 1
2. Event Viewer
Error GetEngineFiles
Event ID 6012
Generation: Microsoft Forefront Server Security encountered an error while performing a scan engine update.
Scan Engine: vBuster (same for microsoft, Kespersky5, Wormlist, etc.)
Error Code: 0x80004005
Description: The product license has expired.
Error Microsoft Forefront Security
Event ID 7007
General: None of the engines enabled for updates have been updated in the last week.
3. About forefront
Opened Forefront Server Security Administrator > Help > About Forefront
Forefront Server:
Version: 10.1.0746
Service Pack: 1
Product Id:
Licensed Components:
Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
DO I HAVE TO BUY THIS PRODUCT or DO I HAVE TO INSTALL Forefront Security for Exchange Server SP2 or SP3?
Can please someone advise in this regard,
Thanks

-->Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
Evaluation version? didn't activate this product? You
can convert an evaluation license to a subscription license by activating the product. Be sure to have the product key available when activating FPE. After the product is activated, you can also align when the product expires with your license agreement, and
easily renew your license by entering a new expiration date.
Best,
Howtodo

Proper IMAP prefix for Exchange Server

Does anyone know what the proper IMAP prefix is for Exchange Server?
Currently, I have specified "INBOX". On the iPhone, I can see my inbox, and all subfolders, but I can't see any other folders on the same level as inbox. Also, the iPhone has created "Sent Items" and "Deleted Items" folders UNDER my inbox and is using those instead of the ones Exchange uses at the same level as inbox.
I tried specifying "/", which wouldn't let me access anything. There doesn't appear to be a way to leave the prefix blank (the iPhone auto-fills "INBOX" if you blank the field), so I haven't been able to try that.
Any ideas? Thanks!
iPhone

You're right. It did. Using an IMAP account instead of an Exchange account allowed me to see all folders at the same level as "inbox". Thanks!
But, what's the point of the "Exchange" account then?

Any known issue reported for "Rollup 8 for Exchange Server 2010 Service Pack 2"

Hello,
Currently our servers are running with "Exchange 2010 SP2 RU7", we are planning to update the Rollup version to RU8 for SP2.
Is there any knows issues reported for "Rollup 8 for Exchange Server 2010 Service Pack 2" till now ? is it safe to update the RU8 ?
http://www.microsoft.com/en-us/download/details.aspx?id=41394

(1) I had to roll it back:
The rollup released Tuesday the 9th caused random problems with systems ranging from general slow down to operation failed errors. It didn’t impact everyone at once and seemed to take 48hrs for everyone to have a problem. Rolling
back the update and rebooting the server seemed to resolve the issue.
Issues reported before the general mailflow stopping for everyone:
Nothing major … an occasional operation failed when I hit send but, it will go thru after I hit the send button a couple of times.
A MICROSOFT OUTLOOK BOX APPEARS WITH A TRIANGLE WITH A ! INSIDE IT. THE MESSAGE SAYS THE OPERATION FAILED.
(2)
ANOTHER CODE APPEARED WHEN I TRIED TO SEND THIS E-MAIL SO I CLOSED OUTLOOK AND RE-STARTED OUTLOOK. THE MESSAGE READ, CANNOT CREATE THE E-MAIL MESSAGE BECAUSE A DATA FILE TO SEND AND RECEIVE MESSAGE CANNOT BE FOUND. CHECK YOUR SETTINGS IN THIS MICROSOFT
OUTLOOK PROFILE. IN MICROSOFT WINDOWS, CLICK CONTROL PANEL.CLICK USER ACCOUNTS AND THEN CLICK MAIL. CLICK SHOW PROFILE, AND THEN CLICK PROPERTIES.
When he tries to open an e-mail, he gets an error message.
If he tries to mark an e-mail unread, he gets a different message.
Thanks Ben

Sizing IIS ARR for Exchange Server 2013

Hi Everyone,..
I planned to publish Exchange 2013 through IIS ARR server, but I've had trouble finding any data on CPU / memory usage for a dedicated ARR server based on Microsoft recommendation. There are 8000 users that will be access from ARR server.
Hopefully you can help for sizing so
there isn't bottleneck on that server.
Thanks
~IH~

Hi Irfan
The concurrent connections depends upon appConcurrentRequestLimit which has a default value of 5000. I think you need to increase this if in your case the concurrent connections exceed 5000
I have found few articles for your reference
http://www.iis.net/learn/extensions/configuring-application-request-routing-(arr)/achieving-high-availability-and-scalability-arr-and-nlb
http://blogs.technet.com/b/tristank/archive/2008/03/11/maxuserport-what-it-is-what-it-does-when-it-s-important.aspx
https://blogs.technet.com/b/exchange/archive/2013/07/19/reverse-proxy-for-exchange-server-2013-using-iis-arr-part-1.aspx
https://blogs.technet.com/b/exchange/archive/2013/08/02/part-2-reverse-proxy-for-exchange-server-2013-using-iis-arr.aspx
https://blogs.technet.com/b/exchange/archive/2013/08/05/part-3-reverse-proxy-for-exchange-server-2013-using-iis-arr.aspx
Its better to submit this to http://forums.iis.net/ since this is more kind of IIS related issue and you will get better response
Good Luck !!
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Manual Updates for Forefront Security for Exchange server

Hello Team
I have installed forefront security for exchange server 2007 in CCR and but there is no internet connectivity as it is in my test lab,
I would like to enable the below scan engine and update the scan engine in weekly basis as i cannot do it on daily, (No Internet Connection)
MS Antimalware engine
Kaspersky
and Norman
Where can i get / download the scan engine updates for the above each scan engines...and how to installed them manually without internet connection . Could someone please help

Hi Quan, and Christian,
Thanks for that.
My Query is that,, where can i download the updates , i mean which website can i can download the udpate for the scan engines,
Since it my testlab environment., i don't have internet connection
i need to download the updates from external (out of my test lab) and transper those udpates via pendire / hard drive to the test lab and from there i need to update.
first of all , i would like know which website any source can provide the updates for these separate scan engine updates.
Hope you all understand

Why is installation file for Exchange Server CU7 much smaller than SP1.iso?

I was wondering why is the ISO-Image for Exchange Server 2013 with SP1 4.5 GB in size and the CU7.EXE only 1.6 GB? I thought CU7 contains everything SP1 contains. Is it because one is a disk image and an other an executable?

The EXE is compressed. When you extract it, it should be close to the same size (probably bigger) than the SP1 iso.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

MaximumDevicesReached for exchange server protocol 12.1?

Similar Messages

Maybe you are looking for