Maxium Payload Size...where to find its meaning?

What does Maxium Payload Size mean in the graphics Bios?
Right now it is set to 4096 and wich are the differences among other settings???
Pad

Pad,
I thought that the Whatis.com information complete enough, but I have had a little experience with Serial Data Transitions Protocols.
However, when you looking for information on computer functions, you will find the data is 9 out 10 times in two forms. One is so general in nature that it only gives you small piece of what need to know or if it goes in detail, then it is so narrow scope that you spend hours boiling down all the detailed information and again it only gives you small piece of what need to know. However, over time, you learn to put all of the little pieces of information together, and then you know the subject.
I do not know if this will help will help, but I will try to explain what I learned to day from the Whatis.com. As far, a PCI-E data transmitions are concerned in regards to Maximum Payload Size.
PCI-Express data transmitions are serial data transmitions, it is just that the controller, which is transmitting the data, has multiple serial routes to send the data to the device that is to receive the data. Therefore, to send the data faster the controller breaks the data down into packages of data and sends the packets of data all at the time using its multiple routes.
This is where “Maximum Payload Size” comes in the controller as it divides the data by the number of routes it has to send the data on. If the block of data the controller has to transmit is large each packet send by each route would be long and if the were no limit on the size of the packet the controller can send. Then larger data blocks could tie up transmition of data to the device for long periods. This is fine if there is only one program that needs to communicate with the device, but if and other program need to send a block of data to the device that is more important then its data would not get sent in a timely manor and say its was time dependant the system breaks down and the system crashes.
Therefore, your Maximum Payload size tell controller if the block of data being transmited must be broken a into groups of packets to be sent and before it sends each group of packets. The controller must check and see if the is another block of data with higher priority that need to be sent. If there is the controller switches to sending the higher priority block of data’s groups of packets and is checking priority of data blocks waiting repeated repeatedly until all blocks of data are sent with the data packet groups with highest priority being send first. Then, it is the poor device controller’s job to receive those packets, place them back into individual blocks of data and for the device to use and act upon.
If still confused, Pad just say, so and I will try again.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

Similar Messages

My iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

my iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

If your contacts are synced to your computer then they are in the supported app you are syncing with.
When you set up syncing of contacts on your device, which application did you select?

I want to copy bookmarks in my folder.where i can find its and how i make it?

i want to copy bookmarks in my folder.where i can find its and how i make it?please

Profile is a folder where your Firefox store all of your information
* https://support.mozilla.com/en-US/kb/Profiles
in this link you can find how to backup your profile and restore them

I have an older airport express but don't know where to look to find its model number. The version number is airport utility 6.3.4 (634.17). Can anyone point me in the right direction? Thanks.

I have an older airport express, but don't know where to look to find its model number.
The version number is airport utility 6.3.4 (634.17).
Can anyone point me in the right direction? Thanks.

Hard to see it's so teeny. I needed a magnifying glass.
FWIW, you should not mark your reply as Solved because you did not solve your question. Helpful and Solved are used to reward the user who help you or solved your problem.

I cant find my favourite app in the Appstore . Its The new TubeBox . Where is ? Its deleted? Why?

I cant find my favourite app in the Appstore . Its The new TubeBox . Where is ? Its deleted? Why? Sorry my bad English

Most likely, is no longer available from the iTunes store.

I purchased Adobe Muse but I cannot find its serial number anywhere. Where should I look?

I purchased Adobe Muse but I cannot find its serial number anywhere. Where should I look? I have a purchase number but I didn't receive any mails from Adobe.

Hello,
Muse CC does not need serial number for installation. You might be getting that prompt due to some network element blocking communication with Adobe servers.
Please try the following:-
1)If you are on a MAC:-
Press Shift + Command + G(Else Finder, Go-->Go to folder) to open Go to folder.
Type /etc and open the file called hosts.
Check if you have any Adobe related entry in the file.
If yes, please rename the file and check again.
2)If you are on windows machine:-
Go to the location:- C:\Windows\System32\drivers\etc
Open 'hosts' file.
Check if you have any Adobe related entry in the file.
If yes, please rename the file and check again.
Regards,
Neha

Hi, how do I manage storage? Disk Utility says "other" is taking up most of my storage but I don't know where to find "other". Please help!

Hi, how do I manage storage? Disk Utility says “other” is taking up most of my storage but I don’t know where to find “other". Please help!

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

How to measure the payload size handled by XI ?

Hi !
I need to find out the memory space occupied by XI payload from sender system to target system per month.. How can i find it ?
Thanks,
Laawanya

Hi,
For a particular message, you can go to SXMB_MONI -> Runtime and you can see the payload size for that particular message. For a month message, you can look into Performance monitoring for all information. I didn't know it shows the size, because in my XI system its taking long time. So you cud check there.
Regards
Aashish Sinha
PS : reward points if helpful

Where to find the Login Picture

Hello;
I wonder where can I find the original picture that is used as my login picture, I mean the big size one.
Worth mentioning is that I managed to extract a 256x256 px version using:
dscl . -read /Users/short_username JPEGPhoto | tail -1 | xxd -r -p > ~/Desktop/accountImage.jpg
But I need a bigger one if possible.
Hope someone will help.
Regards.
-MHD

Hi,
last_update_login contains some id like 11954509
My question is where to find it. Like fnd_profile.value('USER_ID') get us the created_by.
Regards,
Ajay

Where to find file AForm32.api mentioned in Acrobat SDK?

Hello everyone,
A paragraph under the following path in Acrobat SDK
"Acrobat Interapplication Communication > Interapplication Communication API Reference > Acrobat Forms Plug-In > Forms plug-in OLE automation"
suggests to place the AForm32.api file in the Acrobat's plug-ins folder:
Quote:
Registration in the Windows registry (which is different from the class object registration described above) happens every time Acrobat loads the plug-in. Therefore, you must run Acrobat at least once with the AForm32.api file in the plug-ins folder before its type library can be found for object browsing within the Microsoft Visual Studio environment. This is also necessary in order to allow early binding. Declare the program variables as objects of the corresponding classes in AFORMAUTLib, and not simply as Object.
Question:
Does anybody know where can I get the mentioned file AForm32.api ?
Thank you.
surotkin.

AForm32 is now AcroForm – it's the same thing.
However, I don't believe that we expose the COM APIs in the Standard edition – only in the Professional edition.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 23 Nov 2011 09:21:02 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Where to find file AForm32.api mentioned in Acrobat SDK?
Re: Where to find file AForm32.api mentioned in Acrobat SDK?
created by surotkin<http://forums.adobe.com/people/surotkin> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4043128#4043128

4GB File Size Limit in Finder for Windows/Samba Shares?

I am unable to copy a 4.75GB video file from my Mac Pro to a network drive with XFS file system using the Finder. Files under 4GB can be dragged and dropped without problems. The drag and drop method produces an "unexepcted error" (code 0) message.
I went into Terminal and used the cp command to successfully copy the 4.75GB file to the NAS drive, so obviously there's a 4GB file size limit that Finder is opposing?
I was also able to use Quicktime and save a copy of the file to the network drive, so applications have no problem, either.
XFS file system supports terabyte size files, so this shouldn't be a problem on the receiving end, and it's not, as the terminal copy worked.
Why would they do that? Is there a setting I can use to override this? Google searching found some flags to use with the mount command in Linux terminal to work around this, but I'd rather just be able to use the GUI in OS X (10.5.1) - I mean, that's why we like Macs, right?

I have frequently worked with 8 to 10 gigabyte capture files in both OS9 and OS X so any limit does not seem to be in QT or in the Player. 2 GIg limits would perhaps be something left over from pre-OS 9 versions of your software, as there was a general 2 gig limit in those earlier versions of the operating system. I have also seen people refer to 2 gig limits in QT for Windows but never in OS 9 or later MacOS.

Where to find API documentation on massage handling from Email to PDA?

Where to find API documentation on massage handling from Email to PDA? and vice versa..?

You'll have to help me understand what you want to do.
:"message handliing from e-mail to pda" doesn't mean much to me.
We prrovide ENS, which is what most folks that want notification to pda's want.

Where to find the downloadpack, I have purchased the licensekey

Where to find the downloadpage for Lion

Open the Mac App Store, go to its homepage, and choose Redeem under Quick Links.
(118317)

Where to find a newsletter tool/app for a sharepoint online public site ?

where to find a newsletter tool/app for sharepoint online public site ?
can anybody tell me where/how to find a newsletter tool/app in the sharepoint online solution for sharepoint public site ?
Its for marketing, where visiter can add his/her mail for receiving marketing mail,
and he/her should have the possibility to stop membership af the newsletter group.

Hi,
There are several one over the store
go to the store
https://store.office.com/search.aspx?productgroup=SharePoint&qu=news&ui=en-US&rs=en-US&ad=US&page=1&order=0&direction=0
https://store.office.com/lwb-news-rotator-app-WA104379045.aspx?assetid=WA104379045
https://store.office.com/corporate-news-WA104033744.aspx?assetid=WA104033744
https://store.office.com/news-slider-pro-WA104362327.aspx?assetid=WA104362327
https://store.office.com/simplenews-WA104019122.aspx?assetid=WA104019122
https://store.office.com/news-huddle-WA104379096.aspx?assetid=WA104379096
https://store.office.com/repoint-news-WA104146068.aspx?assetid=WA104146068
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Where to find out with serial number to verify whether my dslr is genuine or not?

where to find out with serial number to verify whether my dslr is genuine or not?

Hey guys!
The following information can be found at https://www.usa.canon.com/cusa/consumer/standard_display/gray_market
Information on Parallel or "Gray Market" Products
Canon sells and supports Canon-brand consumer and professional products in the U.S. through Canon U.S.A., which distributes these products through its authorized dealers and distributors. Canon U.S.A. is the only authorized importer of these products in the U.S., and provides industry-leading customer service and support for them. Products distributed by Canon U.S.A. are "localized" to meet the needs of customers in the U.S. market and are engineered to comply with local safety regulations and governmental requirements. As such, these products come with different accessories, manuals, and warranties than the versions intended for sale in other global regions such as Asia. Any Canon-brand products which are imported and sold other than by this method are referred to as "parallel," or "Gray Market," products (collectively, "Gray Market Products").
Hazards and Difficulties Associated with "Gray Market" Products
Customers in the U.S. may find that Gray Market Products do not meet their expectations because they were not intended by Canon for sale in the U.S. In some cases, sellers of Gray Market Products may attempt to localize the products themselves by adding, changing or removing certain accessories from the products, which may result in the following:
including in product packaging illegal or counterfeit accessories, such as batteries, chargers, and ink tanks, which can cause injury and seriously damage your Canon product;
an incorrect power cord or adapter which was not provided, or quality checked, by Canon;
incorrect software or illegal copies of software which may not function;
poor photocopies of the original manual;
a fake Canon U.S. warranty, a warranty provided by a third party, or no warranty at all; and
a device with a serial number which cannot be registered with Canon in the U.S.
Customers should also be aware that Gray Market Products may not be eligible for:
coverage under a U.S. warranty;
U.S. promotions, including mail-in and instant rebates; and
technical support
If you are in doubt about a seller, or whether the products it sells are intended for the U.S., please visit http://usa.canon.com/authorizeddealers for a list of Canon U.S.A.'s Authorized Dealers. New and genuine Canon products intended for sale in the U.S. can only be purchased from Canon Authorized Dealers in the U.S. or from Canon U.S.A. directly.
To learn more about counterfeit products, please visit http://usa.canon.com/aboutcounterfeits to view important information.

Maxium Payload Size...where to find its meaning?

Similar Messages

Maybe you are looking for