MaxNBrowseValue Registry Key
Hello,
We have a report with a parameter with dynamic prompt. This read entries from Item Master Table from the database. When running the report, only 500 or so item records are displayed in the prompt, though there are around 1500 records.
Upon searching on internet, I came across some posts for older versions that there is a registry key which controls the number of records being displayed. I changed this value to 1000, but there was no effect. In fact, after restarting, I realised that Crystal has changed the value back to 500.
Is there any other way to control this??
We are using Crystal Reports 2008 for SAP Business One.
Thanks & Regards,
Rahul Jain
the registry key changes are as follows
Crystal Reports 2008
1. Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12\Crystal Reports\DatabaseOptions\LOV.
NOTE Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 12\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12\Crystal Reports\DatabaseOptions\LOV key.
2. Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter.
NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI R3 or Crystal Reports Server XI R3, you must specify another value.
NOTE The higher the number of values is, the longer it will take the Enter Values dialog box to populate with values.
3. After making changes to the registry, restart the affected service or application as required.
regards,
Raghavendra
Similar Messages
-
"Error while registering the Java 2 Runtime Environment registry keys"
"Error while registering the Java 2 Runtime Environment registry keys"
I am getting the above error when trying to install the 1.3 JRE (installed with the 1.3 plug in which I need). As part of my development I have been installing and uninstalling the JRE multiple times. Then, I got the above error when trying to install it, and now it appears to be installed but I cannot uninstall it. When I try to uninstall it, it just remains, and when I try to install it again I get the above error. I have tried cleaning up all javasoft registry entries, but it doesnt seem to have helped. Can anyone help me either completely uninstall the JRE so I can do a clean install or help me get rid of the error above when I install. Is there some registry entries I should be looking at? Anything else? this is quite urgent as I need to test my applet with the plugin installed and not installed - and I currently cant uninstall it. Any ideas?
Thanks for your help
AaronI am getting this same error message when trying to upgrade from 1.3.1_03 to 1.3.1_19.
I have multiple versions of jre's and jdks on my machine.
Anyone else seen this problem or know how to resolve it. -
When the updater notified me of an iTunes update, I selected the update option. The update failed and killed the version I was running. I have tried for a year to fix the problem without sucess. I can't completely remove all Apple products. I can not install any apple products especially iTunes which is the only one I am interested in.
When I install iTunes now I get a registry key error similar to this:
I am using a machine where I am the only user and am the Admin. I have looked at the security settings on this key and see nothing wrond with it or the parent keys. I tried removing all apple products but ran into similar problems. At this time I still have Bonjour. Mobile Device Support, Software Update, and Application Support installed.These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time? -
Java Plug-in not working with WinXP SP2 Registry Key Missing Error Pop-Up
I have WinXp PRO with SP2 and the Oct 12 Security Update Patch for SP2 loaded and I went to my Control Panel and saw that the JavaRuntime Environment 1.4.2_04 icon was missing and when I went to click the Java Plugin icon to Open it, I got the following message in a Error Pop-Up window:
The system cannot find the registry key specified:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java pPlug-in\1.4.2_04\JavaHome
I then went to Chage Access Program Controls and when I clicked on the Change box for the program, it wanted me to re-install the whole environment.
Prior to doing this, and potentially screwing up my MS winXp environment, I went to the Sun support page for Java Plug-in and I did get the dancing elmo appear as they said I would but I noticed that my environment was MS VM, not Java and that I was out of date and a newer update was avaliable.
The downloads page for the plug-in states clearly that it supports WinXp SP1 and NOT SP2.
SO, my question is, do I need to re-install anything or wait till the whole SP2 issue and java with (BITS) issue gets resolved and just use the MS VM engine during my browsing time? Is there a workaround and what impact will this have on my system? I am not developing Java Apps but am a Power user in Windows who is wondering if applets and general browsing might be easier, faster and more fluid if the Java Runtime was enabled as opposed to the MS VM solution?
Any ideas or thoughts on this very timely issue would be greatly appreciated as I see others have tried to post related issues but none that succinctly combines what I have asked for here in this post.
Thanks from NYC -Phildid you know that XP SP2 has so many technical problems? try SP1 or contact the WindowsXP Vendor
-
How to get registry key lastwritetime using batch/powershell
Hello,
I want to get a registry key's LastWriteTime using batch/powershell. These are what i have tried..
1. Launch regedit and manually export the key using the UI, this gives me the lastwritetime, but I need a commandline version of this. regedit /e only exports the key and value data.
2. dir HKLM:\software\mykey
nothing returned
3. Get-ChildItem HKLM:\software\mykey | Select-Object *
nothing returned
4. Get-ItemProperty HKLM:\software\mykey | Select-Object *
LastWriteTime not returned; other values are returned
5. (Get-Item HKLM:\software\mykey).LastWriteTime
Nothing is returned
Is the only way to do this by using pinvoke with RegQueryInfoKey?
Thanks in advance
ss883rThe
.zip on the repository will still work for version 2. Basically, you'll get a definition for a function called 'Add-RegKeyMember'. You can dot source the provided script, or you can copy the function definition into your own script. You would use it like
this:
# Using Get-Item:
PS> Get-Item HKLM:\SOFTWARE | Add-RegKeyMember | select Name, LastWriteTime, ClassName
# Using Get-ChildItem:
PS> Get-ChildItem HKLM:\SOFTWARE | Add-RegKeyMember | select Name, LastWriteTime, ClassName
# Passing a path:
PS> Add-RegKeyMember HKLM:\SOFTWARE | select Name, LastWriteTime, ClassName
There's also a proxy function for Get-ChildItem that will automatically add the property anytime you use Get-ChildItem (dir, ls, gci) on a registry path. The PSv3 only method I was talking about simply updates the type data to automatically call the function
on any RegistryKey object. You can actually set version 2 up to do that, but it requires an XML file. -
When Installing iTunes I get an Error Message About A Registry Key
It gives me this error message:
Could not open key:
HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib.QuickTimePlayerApp\CLSID. Verify that you have sufficient access to that key, or contact your support personnel.
I can't find that error listed anywhere on the iTunes support site. How can I fix this?
Windows XP Pro
Windows XP ProCould not open key:
HKEYLOCALMACHINE\Software\Classes\
QuickTimePlayerLib.QuickTimePlayerApp\CLSID
some folks have been having some success with pgfpdwife's technique in the following post:
pgfpdwife: Re: Could not open key HKEYLOCALMACHINE\Software\Classic\Quicktime.Quicktime\
note carefully that the technique involves a registry edit. be sure to make a backup of any keys you edit. if you're unfamiliar with your registry or registry editing, head to your XP help and support, do a search on registry, and read through the articles that come up.
There are also some instructions on how to back up registry keys in the following document:
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows -
When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.
Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions? -
Failed to set security on SQL Server registry key. Error: 2
Hi,
I have a Primary site (mixed mode) running SCCM 2007 SP1 for many months now with no issues.
This site is made up of two Win 2008 sp2 servers sharing the SCCM roles:-
SCCM01 - Site server, DP, RP, PXE and SQL2005 hosting the SCCM database
SCCM02 – SUP, MP, FSP, SLP
The SQL2005 on SCCM01 is running under a domain service account called
domain\service_sccm which is also a sysadmin in SQL as is the SCCM02 server.
In an effort to resolve the isse I have made this account a Domain Admin.
I have also used this account to log onto SEC01 to run the Secondary Site installation and to be the SQL Service account.
I'm now trying to add a Secondary Site on a Domain Controller called SEC01 (also Win2008 sp2) and on the same LAN as the SCCM01/02.
This is where I get problems.
I run the installation locally on the Sec Site server (DC) as a Domain Admin and the installation completes OK (all green ticks),
the ComponentSetup.log and Pre-Reqs are all good as well however when I check the ConfigMgrSetup.log I see the below -
Failed to set security on SQL Server registry key. Error: 2.
<11-09-2010 22:46:59> SMS Setup full version is 4.00.6221.1000
<11-09-2010 22:46:59> Successfully set security on Setup registry key.
<11-09-2010 22:46:59> Failed to set security on SQL Server registry key. Error: 2
<11-09-2010 22:46:59> Successfully set security on Identification registry key.
<11-09-2010 22:46:59> Creating SMS Inbox Source registry key ...
<11-09-2010 22:46:59> Installing SMS Site Component Manager ...
<11-09-2010 22:46:59> Installing Site Component Manager under acct <NT AUTHORITY\SYSTEM> path <C:\Program Files (x86)\Microsoft
Configuration Manager\bin\i386\sitecomp.exe>
<11-09-2010 22:47:01> Started Site Component Manager service
<11-09-2010 22:47:01> SMS Site Component Manager installation completed.
<11-09-2010 22:47:01> Done with service installation
Adding the PMP role to SEC01 also fails to install and no MPSetup or MPControl logs are created.
WebDav and win2008 roles, features all added and server fully patched.
Despooler.log on SCCM01 seems good and passing keys.
Tried installing to default path and to shortened path such as C:\SCCM
The new secondary site is listed in the console and an address can be added for the Secondary Site
BITS Server Extensions and Remote Differential Compression Features are enabled.
The Group memberships all appear ok:-
SCCM01
Local Admins
contains the sec site server SEC01, SCCM01, installation accounts
SMS_SiteToSiteConnection_001
SEC01 (the sec site server)
SMS_SiteSystemToSiteServerConnection_001
SCCM02
SEC01
No Local Admins as a DC
SMS_SiteToSiteConnection_002
SCCM01
SMS_SiteSystemToSiteServerConnection_002
empty
SQL 2005
This has the account logged in during installation as a sysadmin
SCCM02 is also sysadmin
The fundamental issue appears to be that the SEC01$ server account is not being added to SQL Logins (and therefore SCCM database Roles)
therefore the installation cannot complete.
I have tried to manually add the SEC01 account to SQL Logins before installation of Sec Site but this did not work.
Not sure if the fact that SEC01 is a DC may be a factor.
Appreciate any help if anyone has seen this before or can suggest a resolution.
ThanksAfter a lot of digging around and head scratching I eventually found the resolution.
The original thread title Error turned out to be a bit of a red herring in that my failure to deploy Sec Sites came down to two separate issues seemingly unrelated to the error message of the thread title.
The first part of the resolution was to manually create the SQL Server accounts for the Sec Site Servers and assign them to the smsdbrole_MP DB role to
let the SQL side of the SCCM install complete a s these were not being created automatically.
This then left the fact that that the installation of the Sec Site completed successfully according to the install logs in C:\ however the DP and MP would
never install.
The big clue was eventually contained in the mpfdm.log errors relating to
**ERROR: Cannot find path for destination inbox SMS_AMT_PROXY_COMPONENT on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
and
**ERROR: Cannot find path for destination inbox Asset Intelligence KB Manager on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
Thankfully the errors led me to these two blogs:
http://myitforum.com/cs2/blogs/scassells/archive/2009/07/20/error-cannot-find-path-for-destination-inbox-sms-amt-proxy-component-on-server-registry.aspx
and
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/5fcc53d4-8629-4b34-9eaa-6cb020eedc13/
As it turned out the SCCM installation registry and folder creation does not complete and I had to manually enter the reg settings as detailed in the
links above to complete the installation. Once I did as described everything worked a treat – all my MPs and DPs are 100% now.
Solutions
Add the following reg keys to each of your effected secondary sites.
Inbox Fix
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\MPFDM\Inboxes]
"Asset Intelligence KB Manager"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\AIKbMgr.box"
"SMS_AMT_PROXY_COMPONENT"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\amtproxy.box"
Asset Intelligence fix:
Note: you will need to identify the next largest key value.
In my example it was key 49
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\49]
"Inbox Name"="Asset Intelligence KB Manager"
"Relative Path"="inboxes\\AIKbMgr.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
AMT registry Fix.
Note: you will need to identify the next largest key value.
In my example it was key 50
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\50]
"Inbox Name"="SMS_AMT_PROXY_COMPONENT"
"Relative Path"="inboxes\\amtproxy.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
Big thanks to Shaun Cassells and John Marcum for these blogs -
Notification Server error 2, Registry Key not found?
Hello everyone,
I've got more of a cosmetic problem as it seems atm. When checking the Component Status, I see some red crosses in a couple of components. Two being SMS_SITE_COMPONENT_MANAGER and SMS_NOTIFICATION_SERVER. The site itself seems to be working okay, although
it has some problems here and there, but nothing too troubling.
The first error, located in SMS_SITE_COMPONENT_MANAGER, states that a the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer cannot be written and returns error code 6 - handle invalid.
The second error, located in SMS_NOTIFICATION_SERVER, states that the above mentioned key cannot be found and returns error 2 - cannot find file specified.
I've checked the registry and the key is definitely there. I also checked the permissions and local service, system and the Primary Sites computer account have full permissions.
The Key contains three values:
- Default - REG_SZ - No Data
- Reserved 1 - REG_SZ - No Data
- Reserved 2 - REG_SZ - No Data
I've found this
thread that suggests a site reset as the solution, but that was already done two weeks ago and it's currently not an option as this is a live production system.
Any suggestions?
Best Regards,
FredHi Torsten,
I'm getting the following entries in sitecomp.log:
Component SMS_NOTIFICATION_MANAGER is running.
Writing component specific registry values.
Cannot get copy of HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer registry key on server V000C00001.ODIE.CORP.DIR. The operating system reported error 6: The system cannot find the file specified.
STATMSG: ID=579 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SITE_COMPONENT_MANAGER" SYS=site.domain.com SITE=P00 PID=12940 TID=4816 GMTDATE=Mon May 05 07:35:25.898 2014 ISTR0="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Component SMS_NOTIFICATION_SERVER is running.
I've also checked bgbserver.log and I'm getting the following entries there:
Register a DB connection...
BgbServerController COM wrapper object 59429902 is successfully initialized
Error: CBgbServer::ReadRegistrySettings - Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer on the server. The operating system reported error 2:
STATMSG: ID=578 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_NOTIFICATION_SERVER" SYS=site.domain.com SITE=P00 PID=8440 TID=11628 GMTDATE=Mo Mai 05 09:11:07.219 2014 ISTR0="HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Error: Failed to read settings from registry
Failed to initialize BGB server. Wait 300 seconds to do initialization again
Hope this helps somehow. -
what is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...
There is no key because that is an important dialog. Why would you want it to go away?
-
Hello,
Title pretty much states it all. I initially set out (as part of a Security Forensics initiative) to identify the most recently installed applications, modified files, and registry key changes using PowerShell. I attempted to pull this information and sort
them by date installed/last modified, but it was brought to my attention this information isn't always present and can be modified - so it's not accurate.
At that time it was suggested we use Group Policy auditing for Registry and File System - but I'm not sure how I'm going to use/pull these in PowerShell? This will be used on remote host all over the world so local physical access isn't an option.
My question is:
Once Group Policy Auditing for Registry and File System has been enabled, how would I go about pulling those audit logs for review once a system has been identified as compromised? I'm brand new to this GP Auditing (we have a separate team for that) so feel
free to take it from the beginning. :)
Thanks in advance!Hi,
Here are a few suggestions for you:
Ensure Remote Registry service is started on local and remote machines.
Add the – Credential option and supply administrative credentials within the command.
More information for you:
Get-Eventlog doesn't work against Vista/W7 clients
https://social.technet.microsoft.com/Forums/en-US/c5185a01-b0d2-49a7-9aa7-52e6534ada04/geteventlog-doesnt-work-against-vistaw7-clients?forum=winserverpowershell
PowerShell - How to Get XML EventData - Remote Eventlogs - Exchange Events
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/382b10c9-d740-46b1-b81c-b24de911eb14/powershell-how-to-get-xml-eventdata-remote-eventlogs-exchange-events-?forum=ITCG
Powershell script to gather failed logon attempts by event id and type from the security events log
https://social.technet.microsoft.com/Forums/scriptcenter/es-ES/00a62492-c63a-4c8b-92f9-1cc857223a00/powershell-script-to-gather-failed-logon-attempts-by-event-id-and-type-from-the-security-events-log?forum=ITCG
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Acrobat registry keys to create file name and path
Hi,
I need to find a way to get my Acrobat to create a pdf with the same name as the drawing file it's created from and in the same folder as the drawing file. The folder path will vary from drawing to drawing.
I need this to happen automatically, without prompting for the file name or the destination.
I see there is a way to set a pre-defined path using registry keys but is there a way to use registry keys to set the filename and path of the drawing, please?
I would rather not use scripting as I don't really know how to do it.
Thanks,
BarnabyI think it will use the path and name of the original file if you do not prompt for a file name. I always ask, so I am not sure.
-
How to include install date and time in registry keys
Hi All,
Hopefully someone can help me. I am creating an installer which includes some properties in the build specs. I also wannt to include some registry keys to be added upon installation:
1. I include the install directory of the application by providing the key with the value [INSTALLDIR]. This seems to work well and I have no problem with this.
2. The other key I would like to include (but I do not know how) is the date and time of installation. Is there a way of automatically including this in a registry key (similar to INSTALLDIR)?
I look forward to your expert advice!
Kind Regards,
Larry
Laurence C.
Senior Test Development Engineer
Dyson Ltd
Solved!
Go to Solution.Larry,
afaik the setting for "Run as Admin" is per OS process. As the "Run Exe after installation" is a different process as the application you installed by it (e.g. "MyApplication.exe"), i wouldn't expect the MyApplication.exe to require/use admin-rights.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the SQL Server
Reporting Services Application services i got the below error :
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
any kind of help would be much appreciated .I'm having the same issue, but to me it seems like the instructions I've seen are all over the place. I already have SP 2013 and SQL 2012 SP 1 installed. I already added the features for Reporting Services - Sharepoint and Reporting Services
Add-in for SharePoint Products. I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy.
My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
Then when I read this about installing the BI features
http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed. Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option? I have the PowerPoint
Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits: SP 2013 EE is required. Which I have EE.
Is Reporting Services different or in addition to the BI Feature (PowerPivot)?
Have I missed a step?
Thanks for you help.
Kim
Kim.Williams -
H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Maybe you are looking for
-
External Sound Cards with 5.1
Does anyone know any 5.1 USB sound cards that work properly. I want my 4.1 analog system to work. I have heard that the Sound Blaster Extigy works but don't know if its only through the optical port or if the analog ports work as well. I'd also like
-
I was not aware that I had purchased Disco Zoo pack of 100000 Coins for $10.59 (total). I deleted this Disco app from my phone yesterday because my children did not enjoy it. Can I get a refund?
-
Best Process for making DVD slideshows w/iDVD
Hasn't someone made a Sticky about this yet?? I just perused the forum for this answer and it seems the user "Shippley" has provided the most help in this area. I'm hoping they can help in this case. For making a dvd slideshow using ONLY iMovie, iPho
-
Importing iWeb site to my computer
Our website was created with iWeb '09 and published to our site via FTP. I need to be able to collaborate and edit the site also. Is it possible to download the site to my computer and import it into my iWeb '09 on my Macbook Pro? Or, is it possible
-
API for getting iView Type?
Hi All, I could only get the iView description,title from the PCM Object. I would like to retrieve the type(like webdynpro,bsp etc) of iView and other properties. Thanks much, -Krishna