May be someone has example code for using ICQ ActiveX

I can't use the ActiveX of ICQ program may be someone can send me examples for using this ActiveX.
Thank you.

So this is how you build a shift register in labview. I was learning that this was the direction I
needed to go but didn’t have a clue how to go about it. I have it wired up and it works great. Thanks a bunch. But as you can imagine I have more questions
now.
I don’t want to lose the ~ character of my string. This will help reduce confusion later on in
the program. Is there a way to keep the
~ as part of the strings in the array?
Any suggestions on logic for testing string length? I am guessing I need to loop through the
array and check the cells with some form of bit count. The
problem is I am seeing that the array refreshes as quickly as the buffer read. I am concerned there won’t be enough time to
test all cells. It isn’t super critical
but I would like to collect as much of the data as possible. Right now I have only one transmitter but
plan to have multiples and need the flexibility to handle larger samples. At first glance it appears at least 40% of
the packets will be NG.
Finally, I want to display the strings that pass the test in
a single window (cell) without too much blinking. I’m hoping to just see the numbers change.
Thanks again, and happy new year to you too. Cheers!

Similar Messages

Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

cymrieg,
Your code looks good to me. What is the problem? What happens when it fails? What is the IBSTA value on the controller, and at what point in the code does it stop? What is the IBSTA value on the slave, and at what point does it stop?
One thing is that you might not want to call IBCLR() in a loop on the device. At the beginning of the program is fine...This will send a clear command to the device and will clear out any LACS and TACS bits that might be set. Also your IBDEV call shouldn't be in a loop.
Hope this helps, but let me know if you need more information.
Scott B.
GPIB Software
National Instruments

Awesome Site with Example Code For All Classes

Very cool site that has example code for all the Java classes and APIs. You can submit example code yourself too!
http://www.kickjava.com/

kevjava wrote: Some things that I think would be useful:
Suggestions reordered to suit my reply..
kevjava wrote: 2. Line numbering, and/or a line counter so you can see how much scrolling you're going to be imposing on the forum readers.
Good idea, and since the line count is only a handful of lines of code to implement, I took that option. See the [line count|http://pscode.org/stbc/help.html#linecount] section of the (new) [STBC Help|http://pscode.org/stbc/help.html] page for more details. (Insert plaintiff whining about the arbitrary limits set - here).
I considered adding line length checking, but the [Text Width Checker|http://pscode.org/twc/] ('sold separately') already has that covered, and I would prefer to keep this tool more specific to compilation, which leads me to..
kevjava wrote: 1. A button to run the code, to see that it demonstrates the problem that you wish for the forum to solve...
Interesting idea, but I think that is better suited to a more full blown (but still relatively simple) GUId compiler. I am not fully decided that running a class is unsuited to STBC, but I am more likely to implement a clickable list of compilation errors, than a 'run' button.
On the other hand I am thinking the clickable error list is also better suited to an altogether more abled compiler, so don't hold your breath to see either in the STBC.
You might note I have not bothered to update the screenshots to show the line count label. That is because I am still considering error lists and running code, and open to further suggestion (not because I am just slack!). If the screenshots update to include the line count but nothing else, take that as a sign. ;-)
Thanks for your ideas. The line count alone is worth a few Dukes.

Someone has a tutorial for creating screen exit?

I have a development and I do not know how to create screen exit.
Case Someone has a tutorial for creating screen exit please help me
Thank you
<b><i>Wagner Duarte
Consultant - SAP ABAP</i></b>

hI
Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
1. Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
Have a look at below link It will definately help you to undestand the same.
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
check these links.
http://help.sap.com/saphelp_46c/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/screen_exit.html
USER EXITS
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=312792
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=1320078
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=2669896
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
1. Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
and you just go through these links also
Screen exit
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
screen-exits
Check the following link.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=how%20to%20find%20screen%20exits&cat=sdn_all

Incoming payments - payment on account example code for 8.8

Hi
Would anyone have example code for SAP B1 8.8 of an incoming payment - payment on account example please
Thanks
Regards Andy

Hi Ed
Thanks
I actually had a problem with my own code but it turned out someone gave me the wrong gl code to use !
Thanks again
Regards Andy

Could you provide example code for interactive form

Dear all.
I have got document at link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2567f2b-0b01-0010-b7b5-977cbf80665d
In that document it has some part of abap code.
Could you have full example code for interactive form online and offline?
Thank you very much.

Hi,
Go to the following link to know more about adobe interactive form.
http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/bwp_interactive_forms_adobe.pdf
The following link contains a offline application in ABAP. You can try it.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2567f2b-0b01-0010-b7b5-977cbf80665d
For further questions, check the follow
https://www.sdn.sap.com/irj/sdn/adobe
Improving the Performance of Adobe® LiveCycleu2122 Designer Forms(scripting)
http://www.adobe.com/devnet/livecycle/articles/lc_designer_perf_guidelines.pdf
Interactive Forms Based on Adobe Software: Overview
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e635e290-0201-0010-a9be-9e8e4ce04770
Adobe Interactive Forms
http://www.saplounge.be/Files/media/pdf/Huberland-Interactive-Forms-2007.10.10.pdf
Taking interactive forms to next level
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8c103c36-0301-0010-cda8-f6b381bedb6e
Introduction to Adobe PDF Library SDK(PDFL SDK)(Simply scroll the document)
http://partners.adobe.com/public/developer/en/webseminars/PDFL_WebSeminar.pdf
Creating Interactive forms in webdynpro for java
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f27e290-0201-0010-ff82-c21557572da1
PDF-Based Print Forms/SAP Interactive Forms by Adobe
http://help.sap.com/saphelp_nw04s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm
Date Objects in Adobe Designer
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
Checking and Testing a PDF-Based Print Form
http://help.sap.com/saphelp_nw04s/helpdata/en/c2/1fe9aa4d7b413e8515f90b73729e97/frameset.htm
Architecture
http://help.sap.com/saphelp_nw04/helpdata/en/f2/21021b911f4c0cae11459a4ce0bc62/frameset.htm
http://www.nl4b.com/Adobe/Invitation_SAPBrussels_Q407.pdf
Hope this helps!!
Regards,
Arafat

I want the example code for Calendar() and TimeZone() in java

Hi,
I want the example code for the TimeZone() and Calendar() class in java
because i new to java, i am not able to understand the concepts properly.
Thanks...

Hi Paolo Dema.
What are the exact spefications of your computer?
Also did you computer come with 10.6 ot 10.5?.
You may try entering the MPN (marketing part number) Format: M*****/**
The MPN can be found on the product packaging or the System Profiler.

Does anyone have an example code to use mx:ViewStack with my application.

Does anyone have an example code to use <mx:ViewStack>
with my application.
I don't know about how to put value to it and use value in
it.

http://livedocs.adobe.com/flex/2/langref/mx/containers/ViewStack.html#includeExamplesSumma ry
That should be what you're looking for.

Apple Configurator: The spreadsheet provided has redemption codes for "(null)."

I'm trying to import a spreadsheet of redemption codes into Apple Configurator. I download the spreadsheet directly from https://vpp.itunes.apple.com, but when I try to import it, I get the following message:
Apple Configurator: The spreadsheet provided has redemption codes for "(null)."
What can I do to import it?

I've got support from Apple Germany. It seems to be a problem of version 1.1.2 of Apple Configurator and Mountain Lion 10.8.2
As mentioned above I had the same problem using 10.7.4 and 10.7.5 and Configurator 1.1.2. Apple Germany sent me a different spreadsheet, where I've put my codes in and it worked. Strange but true.
Other story, I bought 50 redeem codes, after installing 22 iPads it stopped, telling me that there are no more redeem codes left ?
Good luck contacting Apple directly

Why now has a code to use the ipad with apple tv....

Why now has a code to use the

restart ipad
http://support.apple.com/kb/HT1430?viewlocale=en_US&locale=en_US
restart appletv (you can just pull the plug)
restart the wifi router (you can just pull the plug unless the router documentation say otherwise)
if it does not help then make sure that your wifi router is not using the same ssid (default is often netgear or linksys or whatever the brand is) as other close by wifi networks as that could result in 1 or more of your devices connecting to another network then you think they are using
and if your wifi channel is the default if many close by wifi networks use the same channel it will cause disturbance
and if your wifi network is running 2.4Ghz then it's a rather busy frequency dect phones, microwave ovens and tons of other things use the same frequency so if one have the option of changing to 5Ghz it's less busy == give less disturbances

Example codes for each and every class in API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Try this
http://www.javaalmanac.com/egs/
It's almost complete, but you could help mr. Patrick Chan to write more samples for the few classes left in the Java API...

Example Code for Routine at Data Target in Info Package.

Hi,
Can any one send the example code for writing the routines at Data Target of Info Package for Deleting the Request from Info Cube after Update.
Thanks in Advance,
Regards,
srinivas

Hi All,
I want to know some examples for guidance in writing the Abap Routine at Data Target of Info Package for Deleting the Request from Info Cube after Update.
In the Data Targets of Info Package for Info Cubes we can delete the previous request based on the Conditions, exceptions and also based on the Abap Routine. I just want to know how do we write the Routine.
This option is adjacent to the Maintain to Data Target in Data Targets of Info Package and will available for Info cube only.
Thanks in Advance,
Regards,
srinivas

Example code for each and every class in java API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Crossposted here: http://forum.java.sun.com/thread.jsp?thread=570264&forum=54&message=2820774

Is there a reference document(example, code) for developing usb mini port driver?

Hi:
I studied Bus\USB document of WDK. This document forces on developing USB device driver.
And there are some IOCTL Interfaces of usb bus driver exposed to usb device, like IOCTL_INTERNAL_USB_SUBMIT_URB.
But those IOCTL Interfaces seem to belong to USB hub driver(usbhub.sys).
My job is to developing a usb mini port driver, like usbehci.sys. That can work with usbport.sys.
So I should know the communication interfaces(IOCTL...etc) between them and implement these interfaces.
Is there a reference document(example, code) for developing usb mini port driver ?

No there is no reference documents for this, Microsoft stated from the beginning that they own that layer. You really don't want to go there.
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

Documentation/Example Code for WAPI

Can anybody point me to a place from where i can get Documentation or Example Code for WAPI calls. Especially
SAP_WAPI_START_WORKFLOW
SAP_WAPI_WRITE_CONTAINER.

Can anybody point me to a place from where i can get Documentation or Example Code for WAPI calls. Especially
SAP_WAPI_START_WORKFLOW
SAP_WAPI_WRITE_CONTAINER.

May be someone has example code for using ICQ ActiveX

Similar Messages

Maybe you are looking for