May DTR and NWDI be installed on different servers?

We have a need to seperate DTR and NWDI.
However we dont know if this is possible.
Please advise. I'll give points.

This information of which system has DTR and which has CBS is required when you are creating a TRACk.
check the link below,
http://help.sap.com/saphelp_nw04s/helpdata/en/36/a9de3f68d48f15e10000000a155106/frameset.htm
when you define a trach you are askled for DTR url , where in you can specify the complete address of the system where DTR is installed.
Regards,
Yomesh

Similar Messages

I have AD and Exchange 2010 installed on different servers. can I control both with powershell from the AD server?

Hi all,
I have a lab env that include: 2 server 2012 with AD DS, 1 server 2012 with Exchange 2010, 1 server 2012 that I will install later Edge server.
I have a script that can build all my AD and Exchange infrastructure . This script was tested on single server that hosted both AD DS and Exchange.
My question is how to run the script let say from one of the AD DS servers and do his magic also on the Exchange server?
momu

Hi,
Take a look at this:
https://gallery.technet.microsoft.com/office/Create-a-new-implicit-5fdafe45
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Logical systems assignment when SRM and ECC are on 2 different servers

Hi SRM guru's,
What is the standard practice for Logical system creation and assignment when ECC and SRM are on 2 different servers.
I could not able to find which i created a logical system in SRM server which i created in ECC
Same for the ECC also.
how do i assign logical system of SRM to ECC
vice versa.
your prompt response is appreciated.
Regards

Hi Sai,
Logical System Naming/Creation procedure is not dependent on the servers but it is just a logical representation of a system.
As you are trying to name logical systems for ECC & SRM, please follow the below procedure which is usually recommeded by SAP and followed.
Logical System : <SID>CLNT<Client Number>
For Example if you have a client 300 in system DE0 (also called SID), the logical system name will be DE0CLNT300. And it will be same for SRM system.
You can refer the below document which eplains the creation of logical system and RFC destinations etc
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
Note: Only while configuring the RFC Destination, the servers will play a crucial role.
Regards
Kathirvel

1 Admin console to manage OSB and SOA installed on different servers

Dear All,
We are planning to have OSB installed on Host 1 and SOA server installed on Host 2. But there will be one Admin console to manage these 2 for the ease of maintenance. When i was trying to install this configuration I had few issues. Hope SOA experts can help me with the configuration.
1)
As SOA and OSB are installed on 2 different host both the servers must have weblogic installed as pre requisite. So I will have
on host 1:
http://host1:7001/console
http://host1:7001/sbconsole
On host 2:
http://host2:7001/console (this is redundant)
http://host2:8001/soa-infra
2) Is it possible to inactivate http://host2:7001/console ? and add SOA server running on host2 to http://host1:7001/console. In the sense, I would like to control the SOA server from host 1.
Issue No :2
When I create a domain on Host 1 I just get the options for OSB and not SOA. It is obvious as SOA is not installed on Host1. but if that is the case, Is it possible to add SOA server running on host2 to host1. Is it going to be a cluster?
Is this configuration seems realistic? Has anyone implemented. Any pointers please.
Reagrds,
Aani

Hi Aani,
Please go through the blog series -
http://blogs.oracle.com/reynolds/2010/09/installing_an_11g_soa_cluster.html
You may also refer EDG -
http://download.oracle.com/docs/cd/E17904_01/core.1111/e12036/toc.htm
Regards,
Anuj
Edited by: Anuj Dwivedi on Feb 23, 2011 9:14 PM

How do I uninstall the 5.0 firefox version and then re-install a different version

How do I correctly uninstall my 5.0 version of firefox, so I can download a different version of firefox?

Usually you can install Firefox 3.6 over Firefox 5 without uninstalling. (Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended.)
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. ''If you uninstall, do not remove your personal data and settings, just the program, unless you want to start clean with no bookmarks or personal customizations.''
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

Installing Workspace and Financial Reporting on two different servers

Hello Gurus,
I was wondering if anyone can help me with an issue I am having.
I want to install Workspace on Server 1 and Financial Reporting on Server 2. Is it possible to configure Financial Reporting components which is on Server 2 with Workspace on Server 1..? Shared service is installed on Server 1.
Regards,
Saurabh

Hi Memmet,
Yesterday we tried setting up an environment similar to the doubt that I had and here are the results.
Components in Server 1 : Database, Shared Services, Workspace and Financial Reporting Components
Components in Server 2: Only Financial Reporting Components[Configured with the Database for Workspace on Server1].
Now FR studio on Server 1 works absolutely fine without any errors, but when we try to login to the FR studio that is on Server 2 it gives error that I am not authorized to access.
I referred the document which is in My Oracle support but that did not help much and also provisioned the user with all the required rights in Shared service.
I would like to know if we can have Financial Reporting from Server 1 and Server 2 configured with the same Workspace simultaneously, so that if someone updates any report from the workspace the same are reflected in both the FR studio.
Regards,
Saurabh
Edited by: Saurabh on Mar 7, 2012 12:07 AM

ODI repository and Java EE agent on different servers

Hi all,
I ahd created ODI repository on one data server(172.18.59.67) through RCU. Now due to some memory issues i ahd to install the ODI software on another server (172.18.41.44) and also configured the java ee agent on this second server. Will that be a problem while invoking web service through ODI?
Thanks and Regards,
Sourav

Hi SH
But while testing a web service through ODI web service (my agent is connecting successfully)... i am getting this error:-
1#Error in ODI invocation WS ODIInvoke. ODI-1274: Agent Exception
Caused by: oracle.odi.core.config.WorkRepositoryResourceFailureException:
oracle.odi.core.exception.OdiRuntimeException:
oracle.odi.core.exception.OdiRuntimeException:
Failed to lookup dataSource from JNDI for name {java:comp/env/jdbc/odiWorkRepository
where am i going wrong?
Regards,
Sourav

BlazeDS and Flex Client Deployed on Different Servers

Hi, I setup a BlazeDS AMF endpoint on a different server from the server where my Flex app is deployed. I get the following error from my Flex app when trying to use this endpoint:
   faultCode: Client.Error.MessageSend
   faultDetail: Channel.Security.Error error Error #2048 url: 'http://cafrfd1y5css50.itsdo.abc.com:7000/sfaflexservice/amf'
   faultString: Send failed
   rootCause:
       [ChannelFaultEvent
        faultCode="Channel.Security.Error"
        faultString="error"
        faultDetail="Error #2048 url: 'http://cafrfd1y5css50.itsdo.abc.com:7000/sfaflexservice/amf'"
        channelId="my-amf"
        type="channelFault"
        bubbles=false
        cancelable=false
        eventPhase=2]
Btw, this setup works fine when my Flex app runs on AIR or as a Flex app (in a browser) from Flex Builder.
This looks like a crossdomain policy issue, so I setup a crossdomain.xml file on the BlazeDS server. When I point my browser to http://cafrfd1y5css50.itsdo.abc.com:7000/crossdomain.xml, I see the following:
    <?xml version="1.0" encoding="UTF-8" ?>
    <cross-domain-policy>
       <allow-access-from domain="*.abc.com" />
    </cross-domain-policy>
Looks good, but I get the same error...
So I monitored the interaction with Fiddler to see if the crossdomain.xml file is loaded. It is. When the service is activated, I see the following GET command in Fiddler:
     GET /crossdomain.xml HTTP/1.1
     Host: cafrfd1y5css50.itsdo.abc.com:7000
And the response contains the contents of the crossdomain.xml file, so I don't know what's going on.
My configuration is:
-- Browser: IE7 or FireFox v3.5 with Flash Player v10.
-- Flex app uses the 3.4 SDK and is deployed on a Tomcat v6 server.
-- BlazeDS server is WebLogic v9.
-- Endpoint definition from services-config.xml on the BlazeDS server is:
   <channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
     <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
   </channel-definition>
-- Endpoint in the Flex app is defined as follows:
   <channel alias="FlexBean">
      <channel_def>my-amf</channel_def>
      <endpoint>http://cafrfd1y5css50.itsdo.abc.com:7000/sfaflexservice/amf</endpoint>
      <destination>FlexService</destination>
   </channel>
Any ideas would be much appreciated...
thanks,
matt

Thanks for the reply, Alex.
I tried setting the domain in the crossdomain policy file to "*", but I got the same error, so I turned on client side logging. The error in the log was:
Error: [strict] Ignoring policy file at http://cafrfd1y5css50.itsdo.abc.com:7000/crossdomain.xml due to missing Content-Type.
See http://www.adobe.com/go/strict_policy_files to fix this problem.
Using Fiddler, I checked the content-type that WebLogic was using for crossdomain.xml. Much to my surprise, there wasn't a content-type in the response, only content-length. So in the web.xml file for this application, I added the following:
<mime-mapping>
    <extension>xml</extension>
    <mime-type>text/xml</mime-type>
</mime-mapping>
Now, the crossdomain.xml file is served with a content-type of "text/xml", and the call to the BlazeDS endpoint works.
Thanks for steering me in the right direction, Alex.
cheers!
matt

BPEL and ESB in different Servers

Hi ,
What is the advantage of having BPEL PM and ESB installed in different servers ?

In my knowledge it has it own merits and demerits
IF (BPEL and ESB) installed in dfferent OC4Js (JVMs)
Merits
1) Individual JVM for each component means more memory allocation and support from JVM
2) More number of processes can be deployed.
DeMerits
1) ESB and BPEL communication can happen via SOAP over HTTP only whereas had these been deployed in the same JVM (oc4j) it can do native communication.
Edited by: cdmnagaraj on Apr 22, 2009 5:17 AM

Repository and data on different servers

I look for information about installing HTML DB.
Is it possible to instal HTML DB repository and application data on two different servers? If yes, how.
Thanks,
SL

Yes, but you have to use db links which are a bit slow. Basically, think of HTML DB as working with only the data in the db in which it is installed. You can use the standard Oracle db techniques, such as Materialized Views over db links to get the data local, or again, use just db links. Your app will parse it's PL/SQL and SQL as a SCHEMA in the db in which HTML DB is installed.
Tyler

DTR and tagging

Does, the DTR provide simmilar functionality to CVS tagging??
D.

The concepts of DTR and CVS are actually totally different. First of all the DTR does NOT support tagging! The DTR does support branching though: you create a new workspace for every new branch. You can integrate activities from one workspace into another (merge branches).

Distribution Monitor for 2 different servers from 2 different sites

Hello all,
We are trying to use Distribution Monitor during a parallel Unicode Conversion on a SAP 4.7 system.
The source system and target system are 2 different servers located on 2 different sites (more than 500Kms distant).
Questions:
1. Can we use Distribution Monitor with 1 source server dedicated for the Export and 1 target server dedicated for the import of a package?
2. If it is not possible, what are the constraints in fact?
3. Can we have a scenario where Distribution Monitor is used on the source system in order to use the parallelism benefit and Migration Monitor used on the target system?
Thanks for your help & feedback,
Chris

Hi Chris,
1. Can we use Distribution Monitor with 1 source server dedicated for the Export and 1 target server dedicated for the import of a package? The Answer is No
In order to use Distribution monitor, u need minimum two application servers on source systems and correspondingly atleast minimum two application servers on target system
For example let us say Application server A and Application server B on sources systems and Application Server C and Application server D on target ytem
Then configure Distribution monitor properties to include two application servers as source systems and two application servers as target systems. When u exeute distribution monitor preparation, first it scan database servers in source system nd target system and then scan CI servers in source and target system. Then Packages will be distributed in two application servers A and B
Run Export from Application server A for first fifty packages , at the same time Run import these first fifty packages in Application Server C
Run Export from Application Server B for other remining packages and at the same time , run import the remaining packages into Application Server D.
(that is one to one correspondence)
2. If it is not possible, what are the constraints in fact? - There is no constraints. However there is lots of time consuming during Distribution monitor preparation and checking.
3. Can we have a scenario where Distribution Monitor is used on the source system in order to use the parallelism benefit and Migration Monitor used on the target system? - The Answer is No.
You cannot mix distribution monitor tool for source system and Migration tool used on target system.
You have to use any one tool depending on the size of database used.
if your database size used is very very large then recommend to use distribution monitor where u in sou can have multiple R3load jobs in each application server. Say Application server A use 20 R3load jobs and Application server B use 15 r3load jobs).
Thanks
APR

I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can't open the application "Install Adobe Photoshop 6.0" because it may be damaged or incomplete".

I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can’t open the application “Install Adobe Photoshop® 6.0” because it may be damaged or incomplete".
Does anyone know how to fix this problem?

you probably have an incomplete/corrupt download.
to confirm check the file size against the expected file size.
then re-download perhaps with a different browser.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

May DTR and NWDI be installed on different servers?

Similar Messages

Maybe you are looking for