May have a job editing a local TV show, advice?
So i've been editing small projects for a while like short films and such and I may have a job editing a local TV show. Was wondering if anyone has experience with this and can offer up any advice, things to be aware of and keep in mind I may not be used to, etc.
Yes, knowing the brand & model camera used, and the codec created, will go a long way toward knowing what you will be able to do
Your version of Premiere Pro will also have an effect on what/how you do things... CS5 and later is MUCH different than CS4 and earlier in the files it will edit
Similar Messages
-
When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected] -
Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
m_fields = NewArrayList()
Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
Next i
'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
stream = File.OpenWrite("D:\MyTestReport2.rdlc")
Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
' Causes child elements to be indented
writer.Formatting = Formatting.Indented
' Report element
writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
writer.WriteStartElement("Report")
writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
writer.WriteStartElement("ReportSections")
writer.WriteStartElement("ReportSection")
writer.WriteElementString("Width", "11in")
writer.WriteStartElement("Body")
writer.WriteElementString("Height", "5in")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Tablix")
writer.WriteAttributeString("Name", Nothing, "Tablix1")
writer.WriteElementString("Top", ".5in")
writer.WriteElementString("Left", ".5in")
writer.WriteElementString("Height", ".5in")
writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
writer.WriteStartElement("TablixBody")
' Tablix Columns
writer.WriteStartElement("TablixColumns")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixColumn")
writer.WriteElementString("Width", "1.5in")
writer.WriteEndElement() ' TableColumnNext fieldName
writer.WriteEndElement() ' TablixColumns' Header Row
writer.WriteStartElement("TablixRows")
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", fieldName)
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows") Since Rows tag in header is not closed not need to open fresh tag
writer.WriteStartElement("TablixRow")
writer.WriteElementString("Height", ".25in")
writer.WriteStartElement("TablixCells")
ForEach fieldName In m_fields
writer.WriteStartElement("TablixCell")
writer.WriteStartElement("CellContents")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, fieldName)
' writer.WriteAttributeString("CanGrow", True)' writer.WriteAttributeString("Keeptogether", True)
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
'writer.WriteElementString("Value", fieldName)
writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
writer.WriteStartElement("Style")
writer.WriteElementString("TextDecoration", "Underline")
writer.WriteElementString("PaddingTop", "0in")
writer.WriteElementString("PaddingLeft", "0in")
writer.WriteElementString("LineHeight", ".5in")
''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
writer.WriteEndElement() ' Style
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TexBox
writer.WriteEndElement() ' CellContents
writer.WriteEndElement() ' TablixCellNext
writer.WriteEndElement() ' TablixCells
writer.WriteEndElement() ' TablixRow
writer.WriteEndElement() ' TablixRows'End of Details Rows
writer.WriteEndElement() ' TablixBody
writer.WriteStartElement("TablixRowHierarchy")
writer.WriteStartElement("TablixMembers")
writer.WriteStartElement("TablixMember")
' Group
writer.WriteElementString("KeepWithGroup", "After")
writer.WriteEndElement() ' TablixMember' Detail Group
writer.WriteStartElement("TablixMember")
writer.WriteStartElement("Group")
writer.WriteAttributeString("Name", Nothing, "Details")
writer.WriteEndElement() ' Group
writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixRowHierarchy
writer.WriteStartElement("TablixColumnHierarchy")
writer.WriteStartElement("TablixMembers")
'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
writer.WriteStartElement("TablixMember")
writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
writer.WriteEndElement() ' TablixMembers
writer.WriteEndElement() ' TablixColumnHierarchy
writer.WriteElementString("DataSetName", "tbdataset")
writer.WriteEndElement() ' Tablix
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' Body
writer.WriteStartElement("Page")
' Page Header Element
writer.WriteStartElement("PageHeader")
writer.WriteElementString("Height", "1.40cm")
writer.WriteStartElement("ReportItems")
writer.WriteStartElement("Textbox")
writer.WriteAttributeString("Name", Nothing, "Textbox1")
writer.WriteStartElement("Paragraphs")
writer.WriteStartElement("Paragraph")
writer.WriteStartElement("TextRuns")
writer.WriteStartElement("TextRun")
writer.WriteElementString("Value", Nothing, "ABC CHS.")
writer.WriteEndElement() ' TextRun
writer.WriteEndElement() ' TextRuns
writer.WriteEndElement() ' Paragraph
writer.WriteEndElement() ' Paragraphs
writer.WriteEndElement() ' TextBox
writer.WriteEndElement() ' ReportItems
writer.WriteEndElement() ' PageHeader
writer.WriteEndElement() ' Page
writer.WriteEndElement() ' ReportSection
writer.WriteEndElement() ' ReportSections' DataSources
writer.WriteStartElement("DataSources")
writer.WriteStartElement("DataSource")
writer.WriteAttributeString("Name", Nothing, "tbdata")
writer.WriteStartElement("DataSourceReference")
writer.WriteEndElement() ' DataSourceReference
writer.WriteEndElement() ' DataSource
writer.WriteEndElement() ' DataSources'DataSet
writer.WriteStartElement("DataSets")
writer.WriteStartElement("DataSet")
writer.WriteAttributeString("Name", Nothing, "tbdataset")
writer.WriteStartElement("Query")
writer.WriteElementString("DataSourceName", Nothing, "tbdata")
'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
writer.WriteElementString("CommandText", Nothing, "TableDirect")
writer.WriteEndElement() ' Query'Fields
writer.WriteStartElement("Fields")
ForEach fieldName In m_fields
writer.WriteStartElement("Field")
writer.WriteAttributeString("Name", Nothing, fieldName)
writer.WriteElementString("DataField", fieldName)
writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
writer.WriteEndElement() ' FieldNext
writer.WriteEndElement() ' Fields' rd datasetinfo
writer.WriteEndElement() ' DataSet
writer.WriteEndElement() ' DataSets
writer.WriteEndElement() ' Report' Flush the writer and close the stream
writer.Flush()
stream.Close()
'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
Dim ms AsNewMemoryStream(myByteArray)
'Supply Stream to ReportViewer
ReportViewer1.LocalReport.LoadReportDefinition(ms)
ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races -
The DPM service terminated unexpectedly during completion of the job. The termination may have been caused by a system reboot. (ID 910)
No idea what happen and how to fix this?I still got this on full backup to tape, anyone experienced this issue?
-
I replaced my and my family's electronic phones and computers with Apple products due to their superior security capabilities, and the intgrity of their workforce. Thus I come to you for help with a serious concern in hopes that you can help me.
Possible Hack into my personal Apple Laptop
I have a feeling my Apple Laptop has been hacked into and is being monitored. Today I noticed that an old HP printer that we removed from our wireless setup was still connected. In my attempt to remove the old one I noticed that as I was trying to do so it seemed my actions were being shadowed and both of my printer icons (old and new printer) dissapeared. Anyway I looked in the wastebasket and noticed the following item which I had never noticed before: "roaming_password_for_1475_txt_webarchive" in the trash. As it looked suspicious I restored it onto my desktop to open it and research it and it had information on it saying, To remove the DOCOMO interTouch Cable turn on the wireless network conection on your computer....." It had text giving my username and password for roaming - I could not copy or pirnt the information from my desktop, so I took a copy and video of it via my Apple cell phone.
Possible Hack into my personal Apple Cell Phone:
I have noticed that when I am on phone calls with certain people, my phone will emit a loud long beep. I am involved with protecting jobs through a union, and am concerned that the county I work for may have had one of their IT people hack into my phone, etc...
Can you please help me with this? PLEASE.
With appreciation
Martha Booker
<Personal Information Edited by Host>I replaced my and my family's electronic phones and computers with Apple products due to their superior security capabilities, and the intgrity of their workforce. Thus I come to you for help with a serious concern in hopes that you can help me.
Possible Hack into my personal Apple Laptop
I have a feeling my Apple Laptop has been hacked into and is being monitored. Today I noticed that an old HP printer that we removed from our wireless setup was still connected. In my attempt to remove the old one I noticed that as I was trying to do so it seemed my actions were being shadowed and both of my printer icons (old and new printer) dissapeared. Anyway I looked in the wastebasket and noticed the following item which I had never noticed before: "roaming_password_for_1475_txt_webarchive" in the trash. As it looked suspicious I restored it onto my desktop to open it and research it and it had information on it saying, To remove the DOCOMO interTouch Cable turn on the wireless network conection on your computer....." It had text giving my username and password for roaming - I could not copy or pirnt the information from my desktop, so I took a copy and video of it via my Apple cell phone.
Possible Hack into my personal Apple Cell Phone:
I have noticed that when I am on phone calls with certain people, my phone will emit a loud long beep. I am involved with protecting jobs through a union, and am concerned that the county I work for may have had one of their IT people hack into my phone, etc...
Can you please help me with this? PLEASE.
With appreciation
Martha Booker
<Personal Information Edited by Host> -
Problems editing website locally
I work from home running Contribute 4 on an XP machine, SP 2
etc etc fully up to date.. Even with quite a good broadband
connection, it is slow and messy to edit and upload every page of
my new site on the remote server. It would like to edit a local
copy on my hard drive, then upload it in bulk.
I tried this and it was a big mess.
I created the local connection just by browsing Contribute to
the folder on my hard disk. This gave an error (sorry now lost) but
then seemed to work well. I may or may not have got this right.
Then I made what was almost certainly a mistake, and uploaded
the files from C: to the server with an FTP client.
After this, Contribute was permanently confused about which
connection it was working with. Even after I deleted the connection
to the hard drive to work only with the remote server, when I tried
to construct links it still offered only addresses from the
now-deleted connection on the hard drive. After a while it
spontaneously opened each and every one of the dozens of gifs and
jpgs on the page as an individual draft, then complained "there
were duplicates already on the server and did I want to save with a
new name or overwrite?" and it took so long to save them all
individually that the program was unusable and I had to re-install
it.
Even after that, the problem with opening all the gifs etc
repeated itself, so I assume the server was corrupt and have now
re-initialised the server from backup and am about to re-install
contribute yet again.
I have yet to fall in love with Contribute!!!
So
(1) can I create the website locally and then upload in bulk?
(2) if so how?
Many thanks for your input
Andrew White
Bristol UKHi Tom,
So if I understand you rightly, it is the _notes, _baks and
_mm folders which cause the confusion? If I wanted to, I could use
Contribute both on the hard disk and on the remote server, just as
long as I make sure these sets of files remain distinct - it that
correct?
Of course I guess it may be simpler and safer to just edit
the set on the hard disk, and never use Contribute on the server at
all.
Many thanks for your reply.
Andrew -
iTunes shows I have an encrypted backup under preferences. It's got the pad lock. When I click restore the encrypted backup is not an option. I've been test MDM products and may have caused this. How do I restore the encrypted backup.
I just came here today to ask the same question.
I have an iPod Gen2 with version 4.2.1 iOS, and iTunes 11.0.2.26
My iPod Touch was running sluggish so I backed up and selected the "Encrypt local backup" to "back up account passwords used on my iPod".
I selected a password for this backup and restored my iPod Touch.
When I went to restore from backup, that encrypted backup is not available on the drop down list.
However, if I go to the top of ITunes and click "Edit", "Preferences" "Device", it shows the back up with the pad lock on it.
I thought I was being smart backing up with encryption to back up account passwords, but now I have lost everything.
So many people have the issue where it asks for a password when they never told iTunes to do an encrypted backup and here we are with an encrypted backup, and we know the password, but we don't get the option to restore from it. -
Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan FoleyThank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. -
I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!! -
I have another computer that a virus may have taken over and I cannot log into it anymore. I just downloaded Itunes on a new computer but most of my songs are not on there. Is there a way to still access or find those songs? Remotely or another way? Or do I need to take it to a tech to get my files off of my hard drive?
Edit > Preferences > Store check Music under Automatic Downloads.
Open the iTunes Store from left hand column, then select Purchasedfrom the column on the right, click the Not In My Library button and select the tunes you want to download again.
That said, you seem to be under a misapprehension as to how iTunes works, or at least how it has worked in the past. It has, until recently, been up to you take care of your purchases once they have been downloaded. You had a one-time download which you were reminded to back up. With the recent change to this policy you can at least download your store purchases again, but having a personal backup of your iTunes store purchases, stuff purchased elsewhere and files ripped from your CDs will still be preferable to gathering all the stuff together again in the event of a disaster.
For a backup strategy see this User Tip.
tt2 -
When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others. -
Macbook Pro, running 10.8.5 - can't restart but can shutdown and boot up - may have virus or malware
Needless to say I'm beyond embarrassed. I teach computer science (Middle School, private school) and have forever warned my kids to be very careful what they download; but are always "safer" with Mac OSX. Alas, maybe not. I was trying to download Google Earth a few weeks ago and got caught in that fake trap (the fake "Installer" trick) and realized way too late I'd downloaded something "else" instead of Google Earth. Pop up adware by the gazillion. My browser settings were a mess. Went in and reset them as best as I could. And for awhile, so far so good. Until I tried to launch Firefox this week; and WOW...awful. I deleted my Firefox files, went to Firefox and RE DOWNLOADED (or so I thought) a new version of Firefox, and WHAM. Hit again. I can shutdown my Macbook; I can boot it up from a cold dead start...BUT I can no longer "Restart" the computer without an annoying popup message pretending to be a wayward "Installer" wanting to "complete a download" stating if I didn't want to complete it I could 'click' Abort...well I tried but the screen froze. I've had to shutdown or do a hard reboot to get it back up again. I've checked my settings on Google Chrome; seems fine. Don't use Safari that much, but it appears to be a Firefox troll.
What should I do to troubleshoot what this is and how to be rid of it? I wish I could send you a screen shot of the pop up but alas, it freezes the screen when I try to click anything thus my Screen shot capability is nil.
I bought this Macbook Pro in April, 2013. It's my workhorse. HELP!1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I think i may have two iCloud accounts how can i merge them?
I think i may have two iCloud accounts as i changed my apple id, I don't seem to be able to access the other. How can i see my documents in the cloud
Hello HVD64
I'm afraid there is no way too merge two icloud accounts together per se. However if you;
1. Go to SETTINGS on your iPhone or iPad.
2. Go to iCLOUD.
3. Scroll to the very bottom, press DELETE ACCOUNT. Before you panic, this is not going to Delete your iCloud account. It is simply going to delete the bridge that connects your device to the iCloud.
4. Choose to KEEP ITEMS ON YOUR DEVICE if asked.
Then sign into your 2nd account, and this will merge both accounts onto one device. There is not much else you can do I'm afraid!
Kind regards
Edward
<Edited by Host> -
The exact and full message is:
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: https://fbstatic-a.akamaihd.net/rsrc.php/v2/yk/r/w50KHoJTfoZ.js:26
so, I have read the many other threads on this problem:
1. I just installed firefox for the first time - this happens on facebook and many other sites
2. I have reset firefox - did not fix the problem
3. I have checked all my extensions and plug ins for up to date
4. I turned off hardware acceleration
5. I tried disabling all my plug ins
6. I used to use firefox, but it started doing this and I was never able to resolve this and went to chrome.
I am using Win 7. No problem, ofr the most part, using IE or Chrome, I just wanted to try firefox again. Does it not work with win 7?You can try to clear the Flash local storage and settings if the problem is with the Flash plugin.
*Windows Control Panel > Flash Player > Storage: Local Storage Settings
**Remove a specific domain: Local Storage Settings by site
**Remove all domains: Delete All and Delete Data
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html -
Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
<f:facet name="second">
<af:panelStretchLayout id="pa1"
binding="#{backingBeanScope.Assign.pa1}">
<f:facet name="center">
<af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
binding="#{backingBeanScope.Assign.r1}"/>
</f:facet>
</af:panelStretchLayout>
</f:facet>
How do I resolve it ?
Thanks,Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank
Maybe you are looking for
-
Can other family members download app I bought?
Is it possible (and legal) for other family members to download an app I bought? For example, can I log in on their computer with my apple id and download the app without messing anything up?
-
Help! MacBook won't start using 10.4.11
My MacBook ran fine using 10.4.10, no problems. Then I used Software Update to download and install new software, including the update to 10.4.11, iTunes 7.5, new iDVD, and one other item, can't remember. I left and when I came back, the screen just
-
How to transfer photos from htc to iphone
Let's say that I have an iphone and htc, My htc have some good photos, but my htc memory not enough to use, so I would like to transfer htc to my iphone,what I should do?I hope get your help!thanks!!!
-
Hello, My forms9i application is a multi form app with a menu. I have used Call_Form to show my screens in hte application. Now I need to change the application to show multiple screens at a time. ie the user needs to toggle and work b/w multiple scr
-
How can I cancel existing shared computers?
I have used nearly all of my quota of "shared" computers, due to needing to re instals. I now have a new computer, along with a new email. How can I get rid of some of the old sharings, and share with myu new computer.