May i know how to create Transactional Infocube, Data from cube to cube

Hi All,
I need to create a Transactional Infocube. Can anyone help me how to create that. and how it differs from Basic cube while creating Transactional Infocube.
My other question is how to load data from one cube to another.( is it possible from basic to transactional )
It's urgent.
regards,
Ali

Hi Ali,
http://help.sap.com/saphelp_sem60ep1/helpdata/en/7b/a90e78d10311d4b3490050dadfb23f/frameset.htm
Transactional InfoCubes differ from Basic InfoCubes in their ability to support parallel write accesses. Basic InfoCubes are technically optimized for read accesses .
Use
Transactional InfoCubes are used in connection with the entry of planning data. See also Overview of Planning with BW-BPS. The data from this kind of InfoCube is accessed transactionally, meaning data is written to the InfoCube (possibly by several users at the same time). Basic InfoCubes are not suitable for this. You should use Basic InfoCubes for read-only access (for example, when reading reference data).
transactional infocubes can be filled with data using two different methods: using the transaction of BW-BPS to enter planning data and using BW staging, whereas planning data then cannot be loaded simultaneously.
Anyway, the data from this kind of infocube is accessed transactionally, meaning data is written to the infocube (possibly by several users at the same time); basic infocubes are not suitable for this. I think this is the only proper use of this type of cube...
We have an option to switch the Tranasaction cube such as "Loding allowed and Planning not allowed" and "Planning allowed and loading not allowed".
please check these links,
http://help.sap.com/saphelp_nw04/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
function module to read and write to a transactional infocube
read and write to transactional infocube
read and write to a transactional infocube
Regards,
Priyanka

Similar Messages

  • Hi all, May i know how to create filters in Hyperion Planning Application?

    Hi all, May i know how to create filters in Hyperion Planning Application?
    i don't know how to create filters in Planning Application. but my superior asking me to create filters.
    Thanks & Regards,
    Sekhar

    Go to Administration > Dimensions > Select Dimension > Select the member to want to assign acccess filters to :- Assign Access
    Repeat process for all access permissions.
    If there is a lot of permissions to set you could use a utility :-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s07.html
    Refresh Planning including security filters
    Also have a read of :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/mg_secfilter.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hi, may i know how can i get all data back after update ios 6

    Hi,
    May i know how can i get all data back after update ios 6 and all my data lost ?

    You can restore the phone and when prompted to restore choose from icloud account. BUT MAKE SURE there is 1.) an icloud backup for your phone. 2.) you are using the same apple id.
    apl

  • HT1918 I changed the card and i want to know how make to change the data from itunes. I tried and doesn't work.

    I changed the card and i want to know how make to change the data from itunes. I tried and doesn't work. Please, Help Me!

    No. That's not what I said. You can get an out of warranty replacement, which will be exactly the same model, color, and will be locked in exactly the same way the original is. If you want an iPhone 5, get the 4S replaced, sell it, and use the money to put toward a new phone.

  • Is anyone know how to create dynamic pdf file from a JSP page or Servlet ?

    Hi
    Is any one know how to create a dynamic PDF file from JSP or servlet. I need to have standard form format needs to be created and want to send the info to that form dynamically.
    Is there any libraries available?
    Thanks

    I posted a link in this thread to a lib that lets you create PDFs from an app. They have a Java version. I have not used it but I know someone who used it with Microsoft ASP and they liked it.
    http://forum.java.sun.com/thread.jsp?forum=31&thread=287285
    -S-

  • Anyone know how to create a bootable USB from a enc file?

    Does anyone know if its possible and if so, how to create a bootable USB disk from an enc file?
    I need to do this to accomplish a firmware update on my Samsung ssd?
    Any help would be greatly appreciated.
    Thanks

    sig wrote:
    Ask Samsung for their help. enc files are copy safe protected.
    I have been trying to but have not had much joy, will attempt again on friday.
    Thanks

  • Does anyone know how to remove non-music data from ipod?

    Does anyone know how to get the data that is not songs off of the ipod. I cannot figure it out

    With disk use enabled, you just open the iPod in Finder. You should be able to see the folder with the photos in it. If you want to copy them to a place on your computer, just drag them there, or to delete them altogether from the iPod, drag them to the trash.

  • How to create JSON using data from websql

    Hi Experts,
                    am trying to make list in sapui5 and the data in the list should be populate from the database.....so far success but i want to make a json of database

    Ok, I got it.
    You have to store the data as a JSON object or get the data from WebSQL and convert to JSON before use it in your Model.
    You can check the links below.
    javascript - Inserting JSON data into Sqlite/webSQL database - Stack Overflow
    javascript - How can I get JSON fton WebSQL - Stack Overflow
    Hope it helps you.

  • How to view the detailed data from the Planing cube.

    Hi friends , we are having one planning cube which end use will enter the data in to this cube using query input layout.
    End user want to view the data which he has loaded in to the realtime cube to cross verify.
    I try to build this through the query designer on real time cube but iam getting aggrigated values. i need the detailed log , how to achieve this . There is no DSO to develop the query. do i need to use the planning moduler for this or any other alternative.
    Could any one has the solution for this.
    Regards,
    Sruthi.

    Hi , i put all the characteristics in the drill down bu iam not getting the detailed log, as you know iam getting the aggrigated summ of the values are displaying.
    For Ex user will enter the below mentioned values in to Real time cube
    Fiscal Period   Customer Values Currency
    006.2008            20000      $6          USD
    006.2008            20001       $6          USD
    006.2008            20010       $6          USD
    above values are in the cube but when u try to display those valus using the query designed you will get sum of $18 , my requirement is to display table as it shown above.
    Pls help me on this.
    Sruthi.

  • Hi, may i know how to resume the print job from HP P1102w?

    I've configured the P1102W as ePrinter if there anyway to resume the printer in stead of cancel the print job when the printer out of paper?

    Dear ccyee425, 
    Once you load the paper the print job should automatically resume if it does not unfortunately there is not an option to resume the job in the ePrintCenter. You have to send the job again.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP

  • How to create Transaction code for ABAP and execution by other user

    Hi All,
    Could someone please let me know how to create transaction code in detail for ABAP program. Step by step procedure expected. I would like to know how other user can execute the report using same transaction code which I have created.
    More about authorization.
    Thanks in advance.

    Hello,
    You can create transaction code from se80 as well.In object navigator,right click on your program name and create->transaction code.You can create transaction and select if it is only a report,a report with selection-screen depending on your requirement.You can run your report directly by entering the transaction code in the command field.
    You can authorise the users who can use your transaction:
    <b>Authorisation objects</b> are used to restrict certain transactions to users.Critical data must be protected from unauthorised users.For example,the head has access to certain data.But it cannot be accessed by his subordinate.For this we need to define <b>roles</b>.
    •Create an authorization object with transaction SU21.
    An object usually consists of the ACTVT (activity) field and one other field,which specifies the data type to be protected.By ACTVT, we can decide if the data is accessible for change,display only etc.
    •Add authorization fields to the authorization object created.
    •Assign the authorization object to the transaction using SE93.
    Attach the authorization object to the role using transaction PFCG.
    If you want <b>to assign roles</b>,use transaction PFCG.Create a new role.In the AUTHORIZATIONS tab,you can get a self generated profile name and a profile text by clicking on the icon next to it.Then go to the "Change Authorization data" and choose an authorization template.Then you can choose to display/change/create an activity and after the selection,click on the red and white circle.The profile will now be created.
    In the user tab,you can give the user details who can use this role.
    <b>Also check this link:</b>
    http://www.*********************/r3_security/r3_security_tips.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.htm
    <b>Very helpful guide:</b>
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
    Regards,
    Beejal
    **Reward if answer is helpful

  • How to crete transactional infocube

    Hi guys,
               Can any body tell me  how to create transactional infocube.what is difference between transactional infocube and basic infocube and in what situation we will use transactional infocube.
    full points will rewarded for good answer

    Hi,
    how to create transactional infocube?
    Click on create infocube---then u will have options basic ,transactional .select option transactional .
    what is difference between transactional infocube and basic infocube and in what situation we will use transactional infocube?
    Transactional InfoCubes differ from Basic InfoCubes in their ability to support parallel write accesses which means data can be written to the infocube by several users at the same time . Basic InfoCubes are technically optimized for read accesses only.
    Transactional infocubes are used for planning purposes.Basic cubes are not used for planning purposes.

  • How to create transaction for FM

    Hi All,
    Can anybody please let me know How to create transaction for FM which can direct run by passing value and return the result.
    I want to create transaction code for my function module.Please let me know how we can achieve that. tahnsk in adavance.
    Regards,
    Kalpana
    Message was edited by:
            kalpana k

    Hi,
    You can create transaction code for your FM. First create a report program in SE38. and call you FM as shown in below example.
    report Zxyz.
    constants: gc_viewname like dd02v-tabname value 'YFIT_COST_RATE'.
    start-of-selection.
      call function 'TABLE_CUSTOMIZING_MAINTENANCE'
           exporting
                tabname  = gc_viewname
           exceptions
                no_views = 1
                others   = 2.
      if sy-subrc <> 0.
        message a007(e2) with gc_viewname.
      endif.
    similar to this FM you can call your FM and you can write your processing logic after FM call.
    thanks,
    sksingh

  • How to create a new connection from SAPGUI to Test drive?

    Hi,
    I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
    I entered the following values for my new connection entry
    Description: SAP Netweaver
    Application server: 192.168.1.160
    Instance number: 01
    System ID: DB2
    SAProuter: /H/192.168.1.160/S/3201/H/
    But it does not work. Any idea about the values needed  for creating a new entry?
    Thanks in advance,
    Dariyoosh

    >
    Dibya R Das wrote:
    > Why are you entering a router string? Can't you reach a box directly from your machine?
    >
    > Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
    >
    > Remove the router string you wont need if the above works.
    >
    > - Regards, Dibya
    Hello there,
    Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
    Kind Regards,
    Dariyoosh

  • How to create an XML document from a String.

    Can anyone help,
         In the Microsoft XML Document DOM there is a load function load(string) which will create an XML document, but now we are switching to Java and I do not know how to create and XML document from a string, this string �xml document� is passed to my program from a webservice and I need to read several xml elements form it in a web server.
    This string is a well formatted XML document:
    <?xml version="1.0" encoding="UTF-8"?>
    <Countries NumberOfRecords="1" LanguageID="en-us">
         <Country>
              <CountryCode>AU</CountryCode>
              <CountryName>AUSTRALIA</CountryName>
         </Country>
    </Countries>

    Thanks PC!
    I made it work using:
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
    factory.setIgnoringComments(true); // We want to ignore comments
    // Now use the factory to create a DOM parser
    DocumentBuilder parser = factory.newDocumentBuilder();
    //TransformThisStringBuffer is a string buffer wich contain the 'XML document (String)'
    InputStream in = new ByteArrayInputStream(TransformThisStringBuffer.toString().getBytes());
    // Parse the InputStream and build the document
    Document document = parser.parse(in);
    But which one is faster InputSource or InputStream, were would you put the "new InputSource(new StringReader(yourString))" in the above code?

Maybe you are looking for