May I know the document name which I need to follow when I setup SSL on Por

Hi Gurus,
We have installed 9iAS Portal 90201 and upgraded it to 9023. We are trying to setup SSL for everything in the server. We have both infrastructure and middle tier on the same server. We are not sure where to start the SSL setup. Infrastructure has a HTTP server, SSo server ..etc. and the middle tier has a HTTP and OC4j and Portal, webcache..etc. Is there a standard document or list of documents in sequence which I can follow to setup SSL on our server. I have found couple of them. But not sure which one has to go first and which one has to go next. I am planning to use the trial certificate from Verisign. Please post a reply if you have sojme info about it.
Thanks
Raj
----------

We're in the middle of trying to do the same for 904 on Solaris. If anyone has some advice, we'd really love to hear it.

Similar Messages

How to know the Column name which contains some value?

Suppose if a table contains 30 columns, and I want to know the name of the Column that contains my search text(Value).
For Eg. I have a Table named Allowances contains 20 columns for referencing 20 types of allowances. The columns are named like Allw_1,Allw_2,...etc..I know the allowance name(Like "Incentive") and I want to know the Column name on which this allowance name presents.
Pls. help me.

Change your DB model.
A Table with columns called allw_1, allw_2, ... begs to be normalized.

Reading the Interfaces name which the class is implementing in a COM dll is implementing.

Hi All,
I'm using .NET Reflection to read a COM dll. I'm able to fetch the classes that are present in the dll. But I would like to know interface name which this class is implementing.
For a .NET dll we can know the name of class's implementing interface name using the <classname>.BaseType.Name property.
How can I know the interface name which this class is implementing (if any).
Please let me know how to do this for a COM dll.
Thanks in advance,Satish
Thanks, Satish Bommideni "Success usually comes to those who are too busy to be looking for it."

Hi,
Thanks for the reply.
I'm reading the COM assembly using the methods available in oleaut32.dll.
Also I've imported the namespaces
System.Runtime.InteropServices.ComTypes;
System.Runtime.InteropServices;
to use its respective methods and thus I'm able to read it's classes.But donot know what property to check for this class's interface.
Kindly let me know if you need any further information.
Thanks, Satish Bommideni "Success usually comes to those who are too busy to be looking for it."

How To Know The Column Name Of The Internal Table

HI ,
        i have an internal table .
f1          f2           f 3         f4            f5
matnr   mbrsh    mtart     meins       minbe
i want to know the column name which depending on the value i.e . if it is matnr then f1 , if mbrsh it is f2 ..so on
Thanks.

Hi ,
      thanks for your replies . i am elaborating my query .
        I have an internal table with 80 fields i.e.f1,f2,f3......f80 . In the first index i will be having the fieldnames
i.e.matnr , mbrsh , meins , mtart ..... . From second index onwards i will be having the corresponding data for the field name. i need to display a particular field in a table control . Here i will be knowing the fieldname. If i can get to know the column name i.e whether f1 or f2 or ... .i Can populate the data into the table control.
Wht i have done is taken a field symbol and used the following code.
read table i_upload index 1 assigning <lv_upload>.
here i will get the initial first record i.e
F1                                             MATNR
F2                                             MBRSH
F3                                             MTART
F4                                             WERKS
F5                                             LGORT
F6                                             VKORG
F7                                             VTWEG
F8                                             MAKTX
F9                                             MEINS
F10                                             MATKL
F11                                             BISMT
F12                                             BRGEW
F13                                             GEWEI
F14                                             NTGEW
F15                                             GROES
F16                                             KLART
F17                                             CLASS
F18                                             SPART
F19                                             VRKME
F20                                             UMREN
now i want to the field name .
Hope it is clear this time .
Thanks.

Whats the table name which connects BP and customer group code?

Hi,
Please let me know the table name which connects BP and its customer group code, i tried CRMM_BUT_SET0010 but i am not sure how to get "GUID for sets of business part"
regards
Vinay

Hi Vinay
Try instead table vision CRMV_BUT_SET0010. There you can use as search criteria the business partner number.
However, if you want to understand the partner relation with guid_set value, just study how this table vision join is built.
Kind regards,
Garcia

For four days I have been unable to open a lot of documents. When I try I get a message "The document "name" could not be opened. You don't have permission. This has happened to an important letter which I corrected four times. My Mac has altered the name

This problem began when I typed in an address http www etc., making one mistake in the address. I corrected it and then tried to copy the address because it was long (I wanted to be able to acces it another time), and that's when the trouble starrted. I just copt documents to get a new one because it's quicker, but it is unorthodox, I know. Since then whenever I copy a document i cannot open it, and it often puts a gobledegook ending to the document name. I've started emailing texts to myself so as to keep them, but I MUST be able to use documents normally. I hava a MacBook Pro, using OS Mountain Lion 10.8.5. I don't like it. It's fairly new, and has messed up my system of documents : the size is alll wrong and the tabulations are worse than ever. I use text edit because I wanted to use Macdictate because I am handicapped (arthritis and firbomyalgia) but I have never been able to get it to work. Since I changed OS I cannot use Text edit properly any more. Please help me. I think it must be a bug that came through when I was putting this address in four days ago. I went to the site once I'd corrected the address and it was perfectly normal. I shall ring them today and ask them if this has happened to anyone else. I live in France. Thank you for your advice. Because I am handicapped and I do not dirve, it is very difficult to get to a Mac store. I deleted Mac cloud documents because I don't want to use it and I thought it might solve the problem, but it didn"t.

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

When using Quite Imposing Plus the resulting file is only given a Temp name which will be sent as the document name.

Our company has recently upgraded form Acrobat Professional 8 to Acrobat professional XI. We also use the Quite Imposing Plus plug-in in both versions. Now when using Quite Imposing Plus the resulting file is only given a Temp name which will be sent as the document name to the printer unless the imposed document is first saved. This was not the case in Acrobat Professional 8. I have attached a screen shots that shows an example.
Is there any reason why this is happening and how can we stop it.

Thank you for your advice although I think you may be incorrect as the naming of the documents made with Quite Imposing is correct in Acrobat 8.
After reading the comment below it would seem something has changed from version nine onwards.
Going forward we plan on changing the way we save and send our imposed documents to print but thank you for your time.

How do I remove the (-signed) which Adobe adds to the end of the document name after having signed it?

Hi there,
How do I remove the (-signed) which Adobe adds to the end of the document name after having signed it?
It is not convenient to remove it every time I sign a document. So, is there a way to turn this off?
Thank you

I think you cannot, because for many people it is so important to keep the unsigned document, and most do not realise this until it is too late.

I like to know the table name where all the Interface name ( Data Type and

Dear Friends,
I like to know the table name where all the Interface name ( Data Type and Message Type in IR ) is stored.
Thanks.

Hi,
Please find the repository APIs in the SE24 class builder that can be used for accessing repository objects from the ABAP stack of SAP XI. Check CL_SRAPI* in the SE24 transactions for digging further.
location of interface objects
CL_SRAPI_DATA_TYPE---data type
CL_SRAPI_DATA_TYPE_ENH---data type enhancement
CL_SRAPI_FAULT_MESSAEG_TYPE--fault message type
CL_SRAPI_MESSAGE_TYPE--message type
CL_SRAPI_INTEGRATION_SCENARIO--integration scenario
have a look at the table SXMSPMAST, SXMSCLUP & SXMSCLUR
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fbe7b8e-0a01-0010-b69b-b7e717378f22#search=%22SXMSPMAST%20%2B%20XI%22
That document has references to lot of tables maybe it can be of use to u.
Look at the below thread for SXMB_MONI tables and Function module:
In Which Database Table the Messages are Stored in XI
Message Monitoring --> corresponding tables?
Edited by: Dharamveer Gaur on Oct 8, 2008 10:40 AM

Cannot open Pages documents that I've worked on. I open a new document, work on it, then save and close it. When I try to open the document again, I get the following message: The document "[name]" could not be opened. The file isn't in the correct form

I cannot open Pages documents that I have worked on and saved. When I try to reopen Pages documents that I've saved, I get the following
message:
"The document “[name of document]” could not be opened. The file isn’t in the correct format.
The file might be corrupted, truncated, or in an unexpected format."
I have downloaded the latest update to iWork, but that doesn't help.
I use Mac OSX 10.6.7
I am using Pages '09 version 4.0.5 (852)
If anyone can help, I would greatly appreciate it.
Best regards,
New York Mac User

A few general trouble shooting tips that may apply here:
1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
Restart Pages and attempt to open one of the files.
If all is well, Trash the plist file and empty the Trash.
If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
Regards,
Barry

Move the "X" from the left side to the right side in the Document Name Tab

I just installed CS5 MC for MAC and realized that the "X" to close the file is by default located to the left side of the Document Name in the Tab or Bar rather than to the right when multiple files are open in an application. I haven't checked all the Adobe Apps yet, but found this to be the case so far in AI, PS, ID.
Where do I go in the master or individual app settings to reconfigure the file name/document name tab or bar so the little "X" that closes the file is to the right of the name rather than the left?
I did notice that in many of Deke's Lynda training videos, the "X" was on the left in a few sessions, but most were on the right. Really hope this isn't a MAC/PC centric thing or that it is mandatory to download Deke's custom settings for the fix.
Thanks to anyone with the magic answer!!!
Cheers!

Bob --- Thank you for that very quick response.
Bugger for the unfortunate answer, but thank you for advising/confirming the sad reality.
Sure wish some code would fall from the sky and do a fix or workaround on this so users have the option. I may be one of the few hung up on this, but it sure would be nice.
Seems this is yet another "...centric" reason to use a PC in lieu of a MAC when working with Adobe products these days.
Flip/Flop go the platforms!
Cheers!

How to know the database name?

I have installed oracle 10g and developer suite.. I am trying to create forms now.
But its error out: TNS: could not resolve the connect identifier specified!!!
I forgot the Data base name.. How can I know the database name??
Thanks in Advance!!!!!!!!!!

I have installed oracle 10g and developer suite.. I'm sorry, but you are going to have be more specific as what you installed!
If you installed Oracle Database 10g Express Edition then it is not (by default) configured to allow a connection through SQL*Plus. It is primarily configured to open a connection through the "Go To Database Homepage" url/link in the Start Menu => Oracle Database 10g Express Edition => Go To Database Homepage. In order to connect to the database from SQL*Plus (which is included with Oracle Developer Suite 10g) you will need to run the Net Configuration Assistant to configure your TNSNAMES.ora and SQLNET.ora files. Go to Start Menu => Oracle - DevSuiteHome1 => Configuration and Migration Tools => Net Configuration Assistant to run the assistant. After you run the assistant, test to make sure can connect through SQL*Plus before you attempt to connect through Forms.
Hope this helps,
Craig...

I want to know the table name and field names of this descriptions

i want to know the table name and field names of this descriptions
FPAApprover.UniqueName,FPAApprover.PasswordAdapter

Hi Ramana,
Go to the system table DD03T , use the table contents..
In the field ' DDTEXT ' , give your keywords...
for ex : say Unique name... as UniqueName* in field DDTEXT
Execute.. u will find the entries....
May be ur problem will be solved...
Thank u...
Reward if useful and close the thread..
Rajiv

If i know the extract strucute how to know the DS name

Hi All,
If i know the extract structure name how to find the DS name?
Regards
Kiran

If it is for LO extractors we can identify the datasource based on the extract structure.
say if the extract structure name is MC11VA0HDR , 11 will be the application component, VA is the event for salesorder , HDR gives the level of the data it is extracting .So in this case the data source name will be 2LIS_11_VAHDR.
For MC12VC0ITM the data source will be 2LIS_12_VCITM(12 is the application for delivery ,VC the event for delivery)
But for generic and other extractors it is not possible to know the datasource name by seeing the extractstructure. We will have all the datasources information in the roosurce table. Here we can check the datasource which is having that extract structure.

Can i Know the predefined class Which DoesThe same function As of Describe

Hi Abapers,
Can i Know the predefined class Which DoesThe same function As of Describe Key Word.
With Regards
Bhaskar Rao

I cannot find a method or property in ACEDAO to retrieve the precision and scale of a field. Maybe you could try get the number of a decimal type and use some mathematical methods to get the precision.
I find there are some way to get the precision by ADO or OLEDB.
For ADO way, you could check this thread:
https://social.msdn.microsoft.com/Forums/office/en-US/883087ba-2c25-4571-bd3c-706061466a11/how-can-i-programmatically-access-scale-property-of-a-decimal-data-type-field?forum=accessdev
For OLE DB , you could use IColumnsInfo::GetColumnInfo to get DBCOLUMNINFO::bPrecision.
https://msdn.microsoft.com/en-us/library/windows/desktop/ms722704(v=vs.85).aspx
Also people in C++ may not familiar with access development, the
Access for Developers forum is good place for access develop issue. You could try there.
Hope this helps some.
Shu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

May I know the document name which I need to follow when I setup SSL on Por

Similar Messages

Maybe you are looking for