May i Now the Different between C549 and C542

Hi All,
I have a AS5300 with C542 chip, but the new one is C549. So i would like to know what the different? Will there be any effect when running with C542 chip for 4E1 voip?
Thanks with regards
Chan

The following link should answer your question. http://www.cisco.com/warp/public/788/products/dsps.html

Similar Messages

The different between Contain and equals

I not sure about the different between contain and equals if I want to know if the string have some character or not ?
thankyou

HJava wrote:
Thank you for all the reply,
I have if (myTYpe.substring(0).contains(""u") ) work
if if (myTYpe.substring(0).equals(""u") ) not work
so I post this question, may be I made other mistake
Thank youIf you wanted to see if the first character of the string was u then it is either
myTYpe.charAt(0) == 'u'or startWith("u") or matches("^u.*$") etc, etc, etc.
substring(0) will return the entire String, of course, which you would know if had actually looked at the API docs to find out what it did or even simply printed out the result to see what it did. Seemingly, however, you simply assumed you knew what it did and went on with that false assumption without bothering to even attempt to verify even though it was, already, not producing the results you expected. Instead, you focused on "the difference between contains and equals" which is self-evident in their names and obviously not the problem to begin with.

What is the different between statement and preparedstatement?

hi,
recently i have attended a telephonic interview. they asked me what is the different between statement and preparedstatement? and when u will use them? Hi! can any one say me the original difference??

sorry dear,
i am already shortlisted. and monday is my HR round.
. Every 1 is not like u.
So you have read the examples and explanations that you found when you googled, and you have read the javadoc and you still don't understand? And you are shortlisted? For what? I hope you won't do server programming.
I will give you a few hints.
Escaping of data
Storing of dates
Safer
Faster

What is the different between component and component type in extract struc

Hi All,
What is the different between component and component type in the Extract Structure?
I used them, but I never really know the different between them yet.
Thanks,
Grace

The difference between Component and Component Type are:
Component This is essentially the field name in the extraction structure. These can either be SAP delivered field names or custom field names (e.g. Y* or Z*).
Component Type This defines the data definition for the field, along with associated attrributes and descriptions for anything using that Component Type, to define the corresponding Component. If you double-click on any Component Type in an extraction structure, it will show you the definitions that have been setup for that Component Type (will display as Data Element but it's essentially synonymous - Component Type refers to structures and Data Elements refer to tables).

What's the different between cc and cs6? I'm taking a course and cs6 is recommended, but I already have cc, will that be good enough?

What's the different between cc and cs6? I'm taking a course and cs6 is recommended, but I already have cc, will that be good enough?

When I'm away from the desk, I never get the exact wording
"Find new Apps > Filters and versions > select Previous Version"
Then where you see the Install button next to Photoshop below that, click on that and you can select 13.0 CS6 for install.
It's a good idea. CC 2014 has eliminated and added many features, and you want to be on the same page in that course.

What is the different between old and new succession planning?

Hi
I have worked a lot on succession planning in 4.6c. In ECC 6.0, the succession planning has shifted to e-recruitment section.
1. What is the difference between succession planning in 4.6C and ECC 6.0
2. Can I still use the old succession planning in ECC 6.0
3. Is there a requirement to transfer data from old succession planning to new succession planning if we move to ECC 6.0?
Thanks

http://java.sun.com/overview.html
I found that link in five seconds.

What is the different between BW and R/3

my question is:
What is the mainly responsibility for ABAPer in a BW implementation project, just as in R/3 implementation project, the mainly responsibility for ABAPer may include data migration, interface, report, document development, uesr exit and enhancement and so on?
I think ABAPer can use ABAP code for routines, customer exist variables in reporting, enhancement in extraction, transfer rules and update rules in BW, and besides that, are there others responsibilities?
Thanks in advance!

Hello,
rsa7 shows the delta queue of a system with its datasource and the records of the delta to be sent by that datasource.
So in r/3 rsa7 will show all the datasources that exist in r/3 and are to be sent to any other system with its delta records inside (sent to BW).
In BW rsa7 will show all the datasources that exist in BW and are to be sent to antother BW system or sent to any destination inside the same BW system.
Diogo.

What is the different between Aperture and Photoshop

Are these comparable programs? Can I do everything in Aperture I can do in Photoshop? I am trying to decide whether of get Aperture 3 now or await PS CS5/
TIA,
Bill

Bill,
Both previous posters to your question have more experience than I with Aperture, so I won't comment a lot on that one (although I really like Aperture because it can be a one stop shop for the casual photographer who just wants to get the best shots organized, touched-up and perhaps posted to a web site or printed in a book or to paper).
I am not positive of how the adjustment brushes really work (but they seem to utilize 'masking' - something found and used in PS a great deal for artistic reasons). This would be a similarity, although Aperture appears to do masking on the fly while the user applies brushed in edits, where Photoshop is (in many cases) a manual mask created on a layer above the image (this takes more time but offers a bit more control).
I can tell you a few things about Photoshop:
1 - You would use 'Bridge' to ingest and organize your image files (this is not nearly as competent as Aperture for organization, but it will work well for someone organizing, keywording and rating up to a few hundred images per folder).
2 - You would be using the 'Adobe Camera Raw' plug-in to veiw and edit any RAW files you plan to work with in your photography (it is also capable of working with .jpg and .tiff files). All work done inside this plug-in is 'non-destructive' and is not applied to anything but the preview until you save it out as a supported image file type (Aperture does the same).
3 - Photoshop allows editing above and beyond the RAW edits due to layers and the ability to manipulate pixels on each layer. It also has all the tools you might need to create graphics from scratch with pen tools, brushes, text tool, etc.
So in summation, your RAW workflow in PS would be 'Bridge > Adobe Camera Raw > Photoshop', compared to Aperture's 'all-in'one' RAW workflow design.
I can't say a lot due to NDA, but we are now allowed to confirm PS CS5 and I can say that the beta performs at least as well as the current release of PS CS4 on my Mac Pro.
You might use the trial of Aperture to get a feel for the program and then (assuming there will be a trial version of PS CS5 released soon after full release) - you could try that for 30 days and make a decision.
Good luck with whatever decision you make.
Peace.

What's the different between ON_DEMAND and INCOMING_ONLY?

The documentation says: "For ON_DEMAND, the local domain gateway continually advertises services imported from a remote domain." and "For INCOMING_ONLY, the local domain gateway advertises services imported from a remote domain when the gateway receives an incoming connection or when a dmadmin connect command is issued."
I tried setting 2 domains: Domain 1 imports service TOLOWER from Domain 2 with ON_DEMAND connection policy. Domain 2 imports service TOUPPER from Domain 1 with INCOMING_ONLY connection policy.
When I try:
tmadmin
psc
I see TOLOWER as AVAIL in domain 1 and TOUPPER as AVAIL in domain 2 so I see no difference. I though I shouldn't see the TOUPPER service advertised in domain 2 but it's there so how does it really works?

Hi,
Did you check if the connection was up between the domains? Regardless of the state of the connection, the domain gateway in domain 1 will advertise TOLOWER and if no connection is up when the service is called, the domain gateway will try to establish the connection. If the connection succeeds, then the call will complete, otherwise the call will fail, but the service will still be advertised. On domain 2, TOUPPER should only be advertised by the domain gateway if the connection is up. You can use dmadmin to check the state of the connections, as well as manually try to connect or disconnect the connections.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

What is the different between WPUMFactory and UMFactory?

Sorry but i am new in sap portals world and i need some help, somebody can help me?

Hello Josean,
UMFactory is a factory class using which you can play around with the IUser interface...at UME level. Example - extracting the User Profile details, the user groups, mapped systems, etc.
As far as what I read, WPUMFactory is a class used to extract details of an user related to KM, like adding permissions to an user at a Km resource level, etc
Warm Regards,
Ritu

DIFFERANCES BETWEEN WS_UPLOAD AND GUI_UPLOAD??

HELLO ALL,
CAN SOMEONE TELL ME THE DIFFERANCES BETWEEN WS_UPLOAD AND GUI_UPLOAD????
REGARDS,
SEENU

Hi Seenu,
WS_UPLOAD and WS_DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. WS_UPLOAD and WS_DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
Instead of using the function modules, you can use the static methods GUI_UPLOAD and GUI_DOWNLOAD of the global class CL_GUI_FRONTEND_SERVICES.
Regards
Naresh

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC? 2) What is the difference between 6 and CC vercion? 3) When I used lightromm 3, I could see inEXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is ve

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
2) What is the difference between 6 and CC version?
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months.

What is the different between adobe reader and adobe acrobat reader?

what is the different between adobe reader and adobe acrobat reader?What are the procedure to download a Acrobat reader?

Good day,
Adobe Reader is a free application we offer for viewing and printing PDF files. Many years ago, it was known as Acrobat Reader. You may still see some users refer to Adobe Reader as 'Acrobat Reader'. Old habits are sometimes hard to break!
You can download Adobe Reader by visiting: http://get.adobe.com/reader/
Kind regards,
David
Adobe Systems

Photoshop shut down while I drew a picture, now the file is broken and I can´t fix it, photshop won´t open the file and I have tried repearing it with different programs. What should I do?

Photoshop shut down while I drew a picture, now the file is broken and I can´t fix it, photshop won´t open the file and I have tried repearing it with different programs. What should I do? I spent 6 hours on the pic and I dont even have a screenshot or anything.

You don't even say what platform you are on, or any other details that may help others assist you.
If you are on a Mac, try opening your file in GraphicConverter (they have a demo version) if that doesn't open it, nothing will, in my experience.
I assume you have tried Adobe Illustrator already to recover.
You may also have a JPEG of your complete file (flattened) in Bridge Cache.
On the Mac you'd find it in your User ~Library (NOT the Root Library ):
Users > yourname > Library > Caches > Adobe > Bridge CS6 > Cache > 1024 > jpg(fileID)number Filename.psd.jpg
The user ~Library is hidden, but you can make it visible for an moment or two. Ask Apple if you don't know how.
I don't do Windows.

What is the different between Photoshop element and Photoshop CS 6?

What is the different between Photoshop element and Photoshop CS 6?
Which version is latest Photoshop CS 6 or Photoshop CS 8?
Can Photoshop CS 6 & 8 compatible with Window 7 or Window 8.1?
What is the different between Photoshop Element and CS 6 ?

They are two entirely different and separate applications, each one with its own separate and independent development and engineering teams.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve. It has a bunch of features that are absent in Elements.
Elements, on the other hand, is a simplified application lacking much of the power and refinements of Photoshop proper, but it has hand-holding features designed to appeal to amateurs and beginners.
If your needs are not complicated, Elements may just be the ticket for you.
Please realize that you are not addressing Adobe here in these user forums. We are users just like you. Personally, I have no connection to Adobe.

May i Now the Different between C549 and C542

Similar Messages

Maybe you are looking for