May I transport request number from PRD to QAS ?

Dear experts,
Now we need to transport a request from PRD system to QAS system because of the important data was missed in QAS system, so could you give me a solution about this ?
May I create a temporary transport layer and how to create it ? Our current transport rout is DEV>QAS->PRD.
Thanks & Best Regards,
Michael

>
Mark Dijsselbloem wrote:
> Can't you just create a transport via SE10 and attach the object to it? I would manually add the transport to the QA transport queue instead of defining transport routes etc.
>
> You could also export data (as long as it is table data) via R3trans instead of using a transport.
>
> Kind regards,
>
> Mark
Thanks for your reply,  but I can not find the data & cofiles in PRD system directory if there isn't the transport rout.
The cost center master data was delete, and I don't know which table contain these data.
Best Regards,
Michael

Similar Messages

  • How do I find from which terminal transport request imported to PRD

    Hi Experts,
    Let me know how can I find from which terminal transport request imported to PRD
    Thank you in advance.
    Regards,
    Raj

    Hi Raj,
    Please find the answer for your question  in below discussion.
    How to find out workstation of a transport request created
    I hope it will help you
    BR
    AKJ

  • How to get the transport request number of ABAP query.

    I want to find out last Transport Request  number used of a transporting changes Abap query from development to quality system.
    Also is it possible to do some comparison on version existing in development and quality for abap query.

    goto SE03 ..
    In Object Directory -> Double click on
       Change Object Directory Entries
    Enter AQQU(This is for ABAP Query) in the modifiable box ..
    press enter ...
    Check this check box ... Enter the ABAP query and press F8.
    Double click on the Query and in the popup click on the
    Lock Overview ...
    U'll find the request number ...
    Edited by: Srinivas Gurram Reddy on Apr 2, 2008 6:53 PM

  • To change the Transport Request Number Range.

    <b>Hi Experts,</b>
    My customer needs a typical solution.
    He wants SAP to create the Future Transport Requests starting from 10000. ( Ten thousand)
    now the sequential order is 321
    that is <SID><K9>00321. From now on the new transport request should start from 10000
    i.e.
    <SID><K9>100000
    <SID><K9>100001
    <SID><K9>100002
    etc.
    Is it possible. ?
    Thanks for your help.
    Best Regards,
    Raghunahth L

    Hi
    Check the report RSWBO301 and check its documentation..
    Press "I" button in the selection screen to get the documentation..
    I believe this might solve your problem...
    Program documentation
    Short text                                                                               
    Number Assignment for Requests: Find Free Interval                                                                               
    Description                                                                               
    This report program searches for a free interval for numbering requests.
        If the search is successful, you can save the interval. The request    
        numbers are then taken from this interval.                                                                               
    Requirement                                                                               
    For customers the number range interval includes the follwing areas:                                                                               
    o   900000-999999 (just numerals)                                                                               
    o   9A0000-9ZZZZZ for ASCII character set or                           
            9AAAAA-9Z9999 for EBSDIC character set.                                                                               
    You only need to execute this program if you have come to the end of the
         number range interval, but there are still large gaps in the range that
         you want to use up.                                                                               
    Example                                                               
             Why you might get into this situation:                            
             The customer has the R/3 System C11. The last number assigned is  
             C11K900115. The customer now imports transport request C11K9ZZZZA 
             from an external R/3 System C11 into the customer system C11. The 
             next request created in this system will have the number C11K9ZZZZB
                                                                                    Procedure                                                                               
    Proceed as follows:                                                                               
    1.  Execute this program in transaction SE38.                                                                               
    2.  Enter the interval limit, for example 5000. You can change this   
             limit at any time.                                                                               
    3.  Choose Execute.                                                   
             If you entered an interval limit of 5000, the report searches for a
             free interval with a size of 5000.                                                                               
    4.  If the search was successful, you can save this interval. If not,
              repeat the search with a smaller interval.                      
    Thanks,
    Naren
    Thanks,
    Naren

  • Regarding FM that copies Transport Request Number Data

    Hello All,
    I need to find out a function module that copies the object and its details from one transport request number(previously created) to another new transport request number which that FM creates and copies the previous Transport Request number object to new tr number.
    Kindly help
    Regrds
    Mansi

    Look at those Fm
    - [TR_INSERT_REQUEST_WITH_TASKS|https://www.sdn.sap.com/irj/scn/advancedsearch?query=tr_insert_request_with_tasks&cat=sdn_all] or [TRINT_INSERT_NEW_COMM|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=trint_insert_new_comm&adv=false&sortby=cm_rnd_rankvalue]
    - [TRINT_MERGE_COMMS|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=trint_merge_comms&adv=false&sortby=cm_rnd_rankvalue] or [TRINT_COPY_COMM|https://www.sdn.sap.com/irj/scn/advancedsearch?query=trint_copy_comm&cat=sdn_all]
    Regards

  • Assigning the object to a Different transport request number.

    Hi all,
    I have assigned a object to a different transport request  number and i now i want to assign it to a new one..can any one tell me some procedure to change it.
    Tnx,
    Joe.

    Hi Joe
    In SE09 tcode click on display icon and enter the transport number in which the object was already assigned and click on display.
    Now delete the object from the task of the main request number.
    Now its ready to lock in some other transport request. Just goto the workbench object, try to save or activate, it will automatically ask for transport request afresh. You can now assign the request at this step.
    Rgds,
    Sripal

  • Locationg source system object  transport request number in target system .

    Hi,
    After the object is pushed from source system to target using SCC1 for cross clients but same systems or STMS for cross-systems, if we want to see the object's source system's transport request number in the target system, how can we see that ?
    Regards,
    Rajesh.

    Hi Rajesh
    If my understanding is correct you want to know the source server in the target system( i.e where we have transported).
    For cross-system objects, as you know we use STMS to transport them...
    In the target system:
    1. SE10
    2. Click on Transports button.
    3. Select the required request and expand the node.
    4. You will have the first one which has log only for Export.
    The node with only Export log is the source system...
    Hope this helps...
    Kind Regards
    Eswar

  • How to ceate Transport Request Number for importing transport files

    I'm trying to create Transport Request Number for importing transport files.
    I've copied the two transport files (K903281.QB8 and R903281.QB8) into subdirectories usr/sap/trans/cofiles and usr/sap/trans/data, respectively. Now, I want to import the transport files using transaction management system (STMS). Before using STMS, it seems like I need to create Transport Request Number, but I don't know how to create it. Could you please let me know how to create it?

    Sanjeev and Sajay,
    Thanks for your answer. I was able to import the files successfully as transport number QB8K903281 by using standard STMS transport function after manually adding new transport on STMS. My trouble was from my ingrorance of how to let STMS recognize transoprt number for transport files copied from outside SAP. Again thank you very much.
    Tetsuya

  • Transport Request Number range

    Hi All
    I've created a new dev system for an upgrade project, but would like to start the Transport Requests off with a distinct number range.
    Can anyone remind which table has the "Next Transport Request" number that I'll be able to set?
    Ken

    Hi..
    You can try to make program with this code.
    data : wa_E070L type E070L.
    wa_e070l-lastnum = 'TRKORR'.
    WA_E070L-TRKORR = 'DEVK9xxxxx'. 
    MODIFY E070L FROM WA_E070L.
    Where DEVK9xxxxx is number range.
    Thanks
    Ashwani

  • Transport Request Number assingnment.

    Hi  Experts,
                      I Edited and assigned all Function modules into New TP(Transport Request number) but i could not edited Include file  ( LYHRIN_PEMPUXX). How can i assign the include file to my new TP ? It should be in the sub task TP .
       RD2K913301       INABBDEVAD   WB: Previous Employer Development_GP(19.06.2008)
         RD2K913302   INABBDEVAD   Development/Correction (subtask)
    Thanks in Advance.
    Warmest Regards,
    Sivakumar.A

    hi,
    u can do it from se03 transaction.
    select include objects in a request and execute.
    select rradiobutton selected objects, there give ur include and execute .then click on save request there u can save in the request u want.
    reward points if hlpful.

  • About package name and transport request number

    Hello Gurus,
            I know when doing some changes in the sap bw system, and performing activation subsequently , you are prompted to save the changes into some package and transport request. my question is:
            in the real project, where does those package name and transport request number come from?   make up by myself or provided by project management, or someone else?  if doing by youself, how to make up package name and transport request number ?
    Many thanks.

    package is like a folder in windows.. u create package for a project and than collect all the relevant transports in it.
    to create package u use SE80.. Transport req number are configured by basis team.. its usually source system ID and running serial number...
    package name can be decided by tech architect or by ur team manager..

  • Unable to Release request number from DEV

    Hi All,
    I want to release the request Number from Development,But it is not allowing me and saying :'You are not authorized to lock requests or tasks". please help how can i solve this problem as we Dont have Basis person.
    Target System is QAS.
    Anu,.
    Moderator Message: If you do not have Authorization, then thats that! If you do not have a Basis Consultant, that should not be your headache.
    Edited by: kishan P on Mar 2, 2011 11:13 AM

    se03 ---> search for objects in request/tasks ---> choose correct line (for your report, choose prog) ---> write your report's name ---> choose all request types ( also modifiable)
    search your report in other modifiable requests
    regards,

  • Transport request number in LO extraction

    What we have to mention in transport request number  field  while doing LO extraction ? where to find it ??

    Hi
    Trnasport request number is system generated. you can foloow the below steps to activate and transport the LO data source.
    1) activate the data source in RSA5
    2) goto LBWE, you will find the DS in yellow color.
    3) click on activate, now system will promt for transport number. note down this transport number and click on continue
    4) you can check this transport in SE01/SE09 and release the same request.
    5) based on your system transportation settings, you can see this transport in next system in STMS
    check out the below article
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh

  • How to track the transport request number for the Role/Composit Role

    Hi,
    How to track the transport request number for the Role/Composit Role.
    Thanks,
    Ravi

    Use transaction SE03 Transport Organizer Tools
    Execute "Search for Objects in Requests/Tasks" with objects of types:
    R3TR     ACGR     Role
    R3TR     ACGT     Role - User assignment
    Regards

  • Transports from PRD to QAS & DEV in SEM?

    Hi,
    I am in a strange situation. we are on BW 3.0B and SEM 3.1B. For some reasons, My predecessor who worked b4 me implemented SEM planning without DEV system and without transports.
    I've been told that they are not developing any thing in DEV system rather they are developing and testing in QAS. once it is done, they make the same changes manually in PRD without transports.
    they are doing this only for SEM planning. for BW, they are using DEV-QAS-PRD landscape and even transports.
    I'm not even sure what to ask. but, I need to start from here. any suggestions would be highly appreciated.
    Now, I need to start using DEV system for SEM planning as well just like for BW. but, PRD is already running.
    can we transport PRD objects back to DEV and QAS?
    once transported, can i start development in DEV and transport developed objects to QAS and then to PRD?
    if we can, what are the precautions we need to take b4 transporting from PRD to QAS & DEV?
    Is there a way, to find out the differences between "PRD and QAS" and "PRD and DEV" to make changes manually for small changes?
    if nothing is being done, atleast what i can start with to use "landscape DEV->QAS->PRD and transports" by keeping PRD objects alive and running.
    DEV is no where close in synchronous with QAS and PRD. there are quite a bit of differences between QAS and PRD but almost synchronous.
    I'm in a big need of help.
    any kinda ideas are welcome

    Hi,
    I am in a strange situation. we are on BW 3.0B and SEM 3.1B. For some reasons, My predecessor who worked b4 me implemented SEM planning without DEV system and without transports.
    I've been told that they are not developing any thing in DEV system rather they are developing and testing in QAS. once it is done, they make the same changes manually in PRD without transports.
    they are doing this only for SEM planning. for BW, they are using DEV-QAS-PRD landscape and even transports.
    I'm not even sure what to ask. but, I need to start from here. any suggestions would be highly appreciated.
    Now, I need to start using DEV system for SEM planning as well just like for BW. but, PRD is already running.
    can we transport PRD objects back to DEV and QAS?
    once transported, can i start development in DEV and transport developed objects to QAS and then to PRD?
    if we can, what are the precautions we need to take b4 transporting from PRD to QAS & DEV?
    Is there a way, to find out the differences between "PRD and QAS" and "PRD and DEV" to make changes manually for small changes?
    if nothing is being done, atleast what i can start with to use "landscape DEV->QAS->PRD and transports" by keeping PRD objects alive and running.
    DEV is no where close in synchronous with QAS and PRD. there are quite a bit of differences between QAS and PRD but almost synchronous.
    I'm in a big need of help.
    any kinda ideas are welcome

Maybe you are looking for