May I use same transceiver MGBLH1 for linksys2024 and also for the module WS-4448-GB-SFP ?

Hi everybody,
I need to connect 35 nos switches linksys SRW2024 to one switch Cisco Catalyst 4503 - module WS-4448-GB-SFP, with single mode fiber optic.
So my question is, what kind of transceiver can I use to connect the switches? I will use also fiber patch panel, and I need to know also what kind of connectors,and patch cords I need for this one?
I have a few transceivers MGBLH1, this kind may I use also for WS-4448-GB-SFP?
Thanks in advanced for any help from you!

Typically, you cannot use a Linksys SFP modules within a standard Cisco switch due to a software compatibility check between the equipment and the SFP module.
For the Cisco switch, the following compatibility document provides the part numbers for your equipment.
<http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html>
I don't know if the Linksys has the same compatibility check software, but I would assume so.  It also prevents the user from purchasing SFP's from a third-party manufacturer.
Both the Cisco  SFP modules use LC style connectors.
Hope this helps!

Similar Messages

  • Using a single Content server for DMS and also for Archive link documents

    Hi,
    We have Planned for a single content server for managing the documents in DMS, parallelly as DMS Standard SAP objects are not available for all SAP transactions, i have proposed for making use of SAP Archivelink funtionality to maintain the documentations where Std SAP DMS does not provide a Solution.
    so here the question is
    can a single content server be used as a content repository for Both DMS and archivelink,
    can any one having done this pls state if it is possible to create different or Many Content repositories for DMS, Archive link in the same server,
    is this a virtual creation or can we assign each repository a specific storage space which it should not exceed.
    Thanks and regards
    Sathish

    Hi sathish,
    -- Through the ArchiveLink docuemnt Management interface, an SAP sytem can use various content servers as storage media. similarly, one contnent server can be used by multiple SAP systems.
    -- A Content server always has a single database assigned to it. A database can therefore be used by only one content server.
    -- A databse is split into as many repositories as necessary. The design of the repository is mapped in the SAP system.A repository contains documents.
    Depending on your requirements,(if u have limited documents or with low requirements)  you can use the same content server for both DMS and Archivelink.
    The number of documents stored on the content server is limited only by the size of the database.
    Its better to have an external content server for archiving purpose, if your database size is increasing. Since the archiving systems storage is not dependent on the database.
    U can also refer to the below thread :
    How to Archive SAP DMS Data?
    hope this helps....
    regards
    kavitha

  • I use iGoogle as my start page and none of the modules will work. I use Avast anti virus. The modules work in chrome and opera. can you help

    I have checked my setting and options and I cant seem to get igoogle to load the modules to load.

    Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
    DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

  • HT204053 i use one apple id for icloud and one for itunes  and now it wont let me since i reset my phone now  i up graded to iphone 4s still the same problem

    please help me fix this problem I have one id  for icloud and one for itunes that i share with my husband

    If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I have multiple devices (imacs, lap tops and ipads) all connected to a NAS server.  Can I create a user for myself and one for my wife, and each have our own apple ID, and Itunes accounts, but all share the same media on NAS drives?

    I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive.  Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives?  So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?

    You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs.  (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.)  This will prevent you from ending up with merged data.  You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
    This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.

  • My folders take forever to open and then the docs within take a long time for the icon to pop up. the same thing with moving itmes from the desktop to a folder, and also emptying the trashh

    my folders take forever to open and then the docs within take a long time for the icon to pop up. the same thing with moving itmes from the desktop to a folder, and also emptying the trashh

    Don't know if that would be a failing hard drive, but it may be that you are out of available space. How much hard drive space do you have available? Please highlight the Macintosh HD icon and then press Command and I for a get info window. Once open, please copy and post the following:
    Capacity:
    Used:
    Available:
    Mac OS requires a minimum of 10 - 15% of total hard drive space available and empty at all times in order to operate properly.

  • Hi all I am from India,I purchased whatsapp application on14th July for Rs.55 but they charged me Rs.60 for that and also yesterday again they charged Rs.55 for the same app..what should I do??Please help me out guys..

    Hi all I am from India,I purchased whatsapp application on14th July for Rs.55 but they charged me Rs.60 for that and also yesterday again they charged Rs.55 for the same app..what should I do??Please help me out guys..

    Have you added or changed your credit card details on your iTunes account ? If you have then each time that you do so a small temporary store holding charge (the Rs 60) may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
    Store holding charge : http://support.apple.com/kb/HT3702
    For the second charge for 55, you used the same account to re-download the app ? If you did then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

    I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

    I would complete unlocking as is and then
    restore as new once you know the iPhone is unlocked
    Be aware Orange will process the request at their speed
    one of the reasons they usually reside at bottom of User Sat surveys
    will likely take weeks
    This may also help
    http://support.apple.com/kb/HT5014

  • I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

    I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

    Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
    Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

  • Currently have ipod touch 4 and am getting an iphone 5c. Want to transfer data to new phone. Currently all our family devices on one apple ID for purchases and it is the same for icloud. I want to create a new one for icloud for this iphone. What do I do?

    Currently have ipod touch 4 and am getting iphone 5c this weekend. Currently our family has several apple devices and they have the same apple ID for itunes and it is the same ID that we use for icloud. I want to set up a separate icloud ID so that it is only on my new device. I still want to keep the same apple ID for purchases. Can I do this and better yet when do I do this...before the purchase, after the purchase and backing up of data. Where do I go to create a new one?

    Figured it out. Thanks.

  • Idoc for materials and service for same contract.

    Dear All
       I have an scope where i have to migrate the data for material and services for the same contract.Is there an Idoc which does it so or otherwise ?Earlier in scope materials contracts have been loaded with the help of idoc type :- PURCONTRACT_CREATE01  and that of Service Contract using Idoc type :- BLAORD03.No customization is however permitted .Tcode for the same is ME32K.
    Regards
    Somnath

    Hi,
    It is not clear to me if you are working with sapscript or smartforms.
    You have only to find a variable which identifies the kind of invoice
    I do not know that variable so i use an example variable
    for sapscript:
    /: IF &VBDKR-FKTYP& = '1'
    /  INVOICE
    /: ELSE
    /  SERVICE ORDER
    /: ENDIF.
    In a smartform you can also do something like that.
    but There you work with conditions (eq, BOOLEAN)
    You have only to find the right variable
    success,
    Gr., Frank

  • I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more

    I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more
    Any solution ?
    I'm using iOS 6.1.2 IPad 3
    Regards

    I have also noticed the same "problem".  I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

  • Do we use same bank accounts in APP and BRS

    do we use same bank accounts in APP and BRS

    Hi pragnesh,
    It is basic criteria, u need to maintain same bank accounts for APP and BRS, after all what is APP, you are paying amount from your bank account for which the Bank will send the statement for your accont mentioning the various transactions. There is a link between APP and BRS, what ever house bank u r created in FI12, the same needs to be assigned in FBZP (APP configuration) under bank determination.
    Hope u understood.
    regards
    srikanth

  • I have a license for LR 5 (Win) and also have the CC Photography membership. Can I install and use LR on Windows PC and MAC?

    I have a license for LR 5 (Win) and also have the CC Photography membership. Can I install and use LR on Windows PC and MAC?

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • Can I have two versions of firefox? i.e. one for work and one for home use?

    Can I have two versions of firefox? i.e. one for work and one for home use. I use Windows xp
    I would like to start fresh with a new firefox for my work only so I can keep my work related bookmarks etc separate from my at home browsing.

    Yes - are you wanting to run 2 profiles on the same machine? See https://support.mozilla.com/en-US/kb/Managing-profiles on how to create a new profile. You then just choose which profile you want to use each time you open Firefox.

Maybe you are looking for

  • Problem related to OSS Note - importing file problem

    Hi, I m facing an issue while implenting an oss note 430580 , i have to import files from sapserver. but i don't know how to do it. below is the description of my problem. Import the following files from SAPSERV: /general/R3server/abap/note.0430580/K

  • Account 6100011( Forex-gain/loss) requires an assignment to a CO object

    Hello, Can any one explain how to resolve this issue while posting of an invoice to customer in New GL. I have assigned Cost center to the revenue cost element still i am getting the following error. Account 6100011 requires an assignment to a CO obj

  • Report output in smartform example

    Hello, Can anyone tell me if there are available sample reports in SAP with output in a smartform? I have a report which fills an internal table. I would like to pass this internal table to a smartform and display the form. Thank you!

  • How to get the text of the textArea ?

    Hi, expert i have created a new component com1, then i created a table view name 'result'. then i add a textarea by modifying the result.htm textArea id     = "TAMSG"                  text   = "test......" then i add a button in the result.htm the me

  • Clicking mouse after closing JDialog sends event to last component (1.1.8)

    There seems to be a bug in Java 1.1.8 that I'm looking for a workaround. I have a JButton on a JFrame that brings up a modal JDialog when you click it. After closing the dialog, if you click on the JFrame without moving the mouse, it will click the b