May MacBook and iMac do not backup to the Time capsule after a while

After setting up my MacBook Pro and my iMac to back up with time machine to the Time capsule everything worked, it backed up both hard drives. After a few days I first got the message on my iMac that my imac.sparsbundle is allready in use, and no backup can take place, after onother day the same message appeared on the MacBook Pro. I checked all the settings and once I even reformated the Time Capsule and started from new, with the same result after few days the same message apeard again and no backup takes place.
What must I doo to sort this out?

Launch AirPort Utility and make sure your hard drive is showing up in the disk settings then you can erase the disk then try to use it as a TM backup disk.

Similar Messages

I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?

I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?
I'm aware that all printers are not airprint enabled but since i can print form my imac that should not be a problem right?

Hey Fredrik68,
I would double check and see if you meet all the requirements for AirPrint here, including the printer model:
AirPrint Basics
http://support.apple.com/kb/HT4356
Have a good one,
Delgadoh

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html

HT2173 my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min

my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min. What should I do to get my imac past this?

According to your posted Profile here you are running a PPC based iMac. This Forum is only for "Intel iMac's", and so to get the expert and correct help you need you should repost your question in the "PPC iMac Forum".
Hope this helps

I'm installing 10.7 and it will not finish. The time goes into negative minutes.

I'm installing 10.7 and it will not finish. The time goes into negative minutes. It is on a 2 year old 13.3 Macbook Pro. Had hopes of wiping the hard drive durring the install. Any ideas?

Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

My iPad and iPhone are not seeing my airport time capsule

MY iPad and iPhone are not seeing my airport time capsule.

You cannot back up directly to a Time Capsule from an iPhone.
iOS backups are done using either iCloud or iTunes as documented here:
iOS: Back up and restore your iOS device with iCloud or iTunes

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

TS2655 imac can no longer find the time capsule to add it...how do i fix this

my imac can no longer find the time capsule....i had to delete the old network and re add the time capsule to create a new one and now the imac keeps searching for the base and cant locate it

If you mean that Time Machine can't find the Time Capsule, I'd try using the Time Machine panel of System Preferences to redeclare your backup disk. If that's not what you mean, please explain.

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal. In this type of setup, each Express communicates directly to the Time Capsule.
How did you setup the AirPort Express devices?
What version of the Mac operating system are you using on your MacBook? Or, do you have AirPort Utility installed on your iPad?

Airport TimeCapsule wireless works fine, but iMac can no longer find the time capsule disk for backups.

Hi,
I have a new Airport TimeCapsule that I set up about two weeks ago in combination with a new iMac running OS 10.9.4. It ran fine until 2 days ago, when the TC disk image disappeared from the iMac and Time Machine was not able to back up. I tried to find the TC in Airport Utility and it states the "Airport Time Capsule was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet..." I've tried restarting the time capsule. I've tried restarting everything in order (modem>TC>iMac) and the iMac still cannot see the TC disk.
I've had two other issues that I will list in case they are all related somehow:
1) The time capsule took several attempts to set up when I first bought it. I had to reset the TC several times before I got all the way through the set up process successfully.
2) I tried hooking up my printer to the USB port on the airport time capsule and although my MacBook could see it and print to it just fine, my iMac was never able to see it.
The TC is hooked up to the iMac via ethernet cable. Does any of this sound familiar to anyone? I'm about ready to send the time capsule back and just resurrect my old airport that worked flawlessly for years. This airport TC has been a huge disappointment so far.
Thanks

There are some real issues between Mavericks and TC .. (or just network bugginess!!)
There is a heap of things you can do but it is easier to just run through the whole lot in order. None is necessarily the cure and that is why doing all is important.
The list is in this thread.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule
In your case using ethernet can be a problem.. let me say please make sure you have ipv6 set to link-local only in your ethernet setup. I usually only show it in wireless but for you it must be ethernet. The wireless connection seems to be utterly required now for connection.. and hidden away into the airport utility is a switch over from wireless to ethernet. When I made the manual setup instructions above this particular ability (or stupidity) of the Airport Utility was not apparent to me.
So here is typical Airport Utility (AU) v6.. but it is actually working over wireless only. (The v5 utility was wireless + ethernet).
I have an ethernet client on the network that is completely invisible.
Click on the Other WiFi Devices (wrongly named.. it should say other devices).
And you will see the option to choose ethernet.
Then the AU sees the ethernet client and none of the wireless clients.. brilliant stuff eh??
PS this is just a test setup.. never would I have any TC with such an illegal name.. But I hope it shows you what to do.
Fix the names.. most important.. keep them short.. less than 10 characters all the better.
No spaces and pure alphanumeric.

Airport Express and iMac connection cuts out all the time

I have an Airport Express set to 802.11n with b and g compatibility. It is connected to a DSL modem with a static IP address via an Ethernet cable. I use a MacBook Air in the same room as the AE. In another room, I have a 24" iMac (Intel). The iMac is always connected to the AE network as is the MBA. Everytime I make a connection to the iMac (via Screen Sharing or other), the connection cuts out after awhile. There is no interference with the iMac connection, the AE is using a channel no one else around me is using, it just suddenly stops receiving any packets from the AE. I have to open Safari, wait for a website not to load, click on the Network Diagnostic button, go through the reconnection process to the AE network and then it comes back and tells me all is OK. The energy saver is set so the computer never falls to sleep and it is not related to the screen saver coming on.
It just stops sending data to the iMac. All firmware and software are up to date. I have the same problem when using Back to My Mac outside the home. Sometimes I can connect and sometimes I can't.
Can anyone help?

Hi, Thanks for the suggestions. Here are the answers to your questions:
Channel selection is on Automatic. I have tried switching channels on both my DSL router (and it doesn't go to the channel I select!) and on the AE. Performance is the same.
iMac still drops connection even if MBA is not logged onto the network.
Screen Sharing's performance is poor, even if iMac is receiving other internet data (Safari or iTunes downloads)
MBA always has a good connection
Each machine is using 10.5.5. This problem exists only in the last couple of months when my DSL provider (all Linux) changed some of their configurations.
I will try to do the terminal exercise today. So far this am and last night, no dropped connections. Go figure!

Poor network speed with 1st generation time capsule and multiple airport express 5Ghz. My network speed slows to a crawl when not close to the time capsule. I get the range that I need, but the speed is painfully slow.

Hello,
I have a first generation time capsule running 802.11n (b/g compatable) and the airport expresse's are the newer 5ghz models. I have 3 airport express's and I have the range that I need. I can run the time capsule using 802.11n 5ghz, but I loose the range and can't connect to all of the airport express's. My computers and mobile devices run 802.11n. Does anyone have any suggestions on how to increase the network speed. Would the new airport extreme fix the problem?
Thank you

Unfortunately, you are experiencing one of the downsides to 5 GHz. That's because the higher frequency 5 GHz signals are much weaker than 2.4 GHz signals.
After all, you always have to give up something to gain something else. In the case of 5 GHz, you gain potential speed but in return, you must give up penetration power and distance capability.
In order to work well, 5 GHz signals need to almost have a line-of-sight relationship between devices. Unless you can achieve this, you will do much better to leave the Time Capsule running at the 802.11n (b/g compatible) 2.4 GHz Radio Mode and allow the Express devices to "extend" that network.
As for the location of the AirPort Express devices in an exended network, that is critical for best performance. That's because the Express can only "extend" the quality and bandwidth of the signal that it receives. Post back if you need a few more tips on how to find the best location for the AirPort Express devices.
Would the new airport extreme fix the problem?
Unfortunately, no.

How to restore the backup files on time capsule after reinstalled the system

please can someone help me to restore my backups on time capsule after reinstalled the new system. I tried after finished reinstall but it could not find. I also tried with the migration assistant in utilities, it also doesn't work. I always have time machine backed up all my files but now I can not bring anything back

ellabs wrote:
please can someone help me to restore my backups on time capsule after reinstalled the new system.
What "new system" did you reinstall?
Are you upgrading from Leopard to Snow Leopard?
Or did you reinstall Leopard? If so, why and how (that may provide a clue)?
How is your Mac connected to the Time Capsule (use Ethernet for best results)?
You may need to repair the backups, per #A5 in Time Machine - Troubleshooting.

Adding second backup client to time capsule after first has filled drive?

I'm trying to add a second Time Machine client to my Time Capsule. I've had it for a while and the first client has filled the drive. The problem is there isn't enough space free on the Time Capsule for the second client. Is there a way to free up some space so I can add the second client? How do I manage how much space gets allocated to each?

Hi swills. First, click the Time Machine Dock icon and enter the TM 'star field' interface. Then go all the way back to the oldest backups. Go up to the action menu (gear icon) and select "Delete Backup". Do this with several of the oldest backups. This will free up needed space.
Then you need to compact the existing disk image.
First, turn OFF Time Machine Backups on all Macs backing up to the Time Capsule (TC).
Next, open a Finder window and click on your TC in the Sidebar.
If you don't see a blue share folder, you may need to click the "Connect As..." button and enter your Time Capsules password. (Note: NOT your own username and password.)
Double-click the blue folder that appears in the finder window. The sparsebundle should now be visible. DO NOT mount it, just leave the window open.
Now, launch Terminal from the Utilities folder.
At the prompt type in:
+hdiutil compact+
...and then hit the Space bar so that there is a space after +hdiutil compact+.
Next, drag the sparsebundle in question from the Finder window into the Terminal window. This will complete the command.
Now, with the Terminal window in focus, hit Enter.
Eventually, you will see something like this...
+Starting to compact…+
+Reclaiming free space…+
+Finishing compaction…+
+Reclaimed 5.4 GB out of 217.9 GB possible.+
Repeat this procedure for each sparsebundle contained on your TC.
Finally, remember to turn Time Machine backups back ON on all Macs backing up to the TC.
Obviously, if the other Mac still does not have enough space for it's first backup then you will need to repeat the above to free up further space. let us know if this resolves your issue. Cheers!

May MacBook and iMac do not backup to the Time capsule after a while

Similar Messages

Maybe you are looking for