Maya 7 and graphics card for dual 2.3 ?

Hello,
can anyone give me advise which graphics card and how much RAM I should get for the latest 2.3 G5? The applications I am going to use are:
Adobe After FX, Photoshop and Illustrator CS, Logic, Pro Tools, Flash MX2004, and Maya 7 Unlimited (with student reduction) and some other software, which should not be too disturbing.
I found this information about Maya, and am uncertain now which graphics cards could cause problems.
"Maya 7.0 IS NOT qualified on systems using an Nvidia GF4Ti graphics cards and higher. A problem exists where the Trax editor and Dopesheet editor do not draw properly and can lead to a kernel panic. DO NOT upgrade to 10.4.3 at this time if you have an Nvidia GF4Ti graphics card or higher. We are working with Apple to get this issue resolved as soon as possible."
For the rendering with Maya, I would like to aim for a high end graphics card, but would it work on my system? I am also uncertain, if Maya's student version is programmed for dual core processors, I know that the PLE version is not. It would be great, if someone who is using Maya 7 could tell me about their experience.
Thanks
Sprite on Stage

The best place to ask is on the Maya forums.
Maya is always having a problem with new hardware and Mac OS X updates, sometimes it's their fault and sometimes it's Apple's, so it's advised to not to update until they get their bugs worked out and you get the all clear sign from fellow more advanced Maya users.
Cloning your boot drive is a excellent way to "go back" in case a OS update breaks Maya.
I think the best hardware machine is a Quad, not a dual core. Dual cores are going to become standard across all computer lines here next year, from laptops to ordinary desktops just like single processors are now.
So for $800 more you get twice the amount of processors, triple the hardware life expectancy and you can continue to grow with Maya updates as they tax all four cores eventually. A Quad is cheaper per year than present dual cores so you'll save money not having to upgrade next year or so.
When you get your machine, I'm almost sure 10.4.3 will not be pre-installed, if it is you can wipe it and install 10.4 from Tiger disk and upgrade to 10.4.2 from Apple downloads page.
Get some RAM, Tiger overrides Photoshop CS2's RAM limit and gives great performance. The rest of Adobe apps need some work still to optimize for the hardware.
Read more info here, text doc

Similar Messages

  • Recommend compatible PSU and graphics card for P35D3?

    Recommend compatible PSU and graphics card for P35D3?
    This weekend I’ll be taking my rig to a PC repair shop and ask them to swap out my PSU and my graphics card.
    Because I’ve RMA’d all the components (see signature) several members of different forums, and the tech support of the various components, seem to think that my boot problem is because of a compatibility issue with either my Ultra X3 600W PSU or my XFX 8600 GT and my P35D3.
    I need to be ready to make decision, without having time to research, if the repair tech recommends a replacement.
    Here’s my considerations:
    I selected the Ultra because it's both modular and 85% efficient (it also has the required 8-pin cable to power the P35D3's CPU and it has SATA power cables.
    I selected the XFX 8600 GT card because it is dual-link (2 DVI outs -- Dell 30” & Viewsonic 19”) and it has no fan, and is DX10 ready. I’m not attached to the idea of no fan. I’m a speed freak but not a gamer or an over clocker--I like the option of trying out games.
    Both the Ultra and the XFX are somewhat medium priced.
    If the repair tech discovers that other PSUs or graphic cards work then I might be able to get Ultra or XFX to accept a return. Neither company accepted my offer to pay extra to exchange mine for another better model.
    Suggestions please.
    Thank you,
    Kerry

    Thanks Boss,
    Quote
    Look here for good PSU suggestions:
    https://forum-en.msi.com/index.php?topic=112039.msg836246#msg836246
    About VGA any should work, you can see MSI Test Report for your board here:
    http://global.msi.com.tw/index.php?func=prodtestreport&prod_no=1230&maincat_no=1&cat2_no=&cat3_no=#menu
    lots of good info.
    Wish me luck today (Thu), that the tech finds out my XFX or Ultra is not compatible.
    Kerry

  • Where can I get a new replacemen​t motherboar​d and graphics card for HP Tx2 touchsmart 1340ea? Cost?

    my computer has been getting either blue screen of death, or your machine has been turned off to save your computer or pixels jumping around across screen, so on white screen was getting streaks of blue from top to bottom and on black streaks of red dancing about, OR no screen at all - blank. 
    Now machine won't even boot up.  This all happened both on cable and wireless.   Product no VJ667EA #    TX2 Touchsmart 1340ea.
    There have been no upgrades of hardware , and on software front only thing is regular updates of windows.  It was running Windows 7 64 bit professional.
    It is now totally dead.  If you try to boot up you get the electric symbol light up, and caps lock and end /number lock light up and flash... thats it.
    We just tried to blow out dust that is all.  I have a nasty feeling HP doesn't want to sell any parts and only bothered about selling folks like me  a new machine which I am not going to buy.    This one didn't last more than 18 months, just long enough to be out of guarantee.  Here's hoping I am wrong and there are replacement motherboards and graphics cards (it

    You're very welcome.
    What seems to be unfair is I can buy that motherboard directly from HP in the USA as you saw, but for whatever reason you can't buy it directly from HP in the UK.
    I still think you would be better off checking out what related notebooks may be for sale out there on eBay UK.
    I buy all my PC's on eBay in used condition for great bargains. I do limit myself to the business PC's and notebooks that HP makes, however.
    Best of luck in whatever you decide to do.
    Regards,
    Paul

  • Maximum boosts to RAM and graphics card for iMac G5 PowerMac 8.1?

    Hi.
    Just bought this still excellent machine secondhand with a 3 month rtb warranty.
    It currently has these specs, and I'd like to know what level I can take them to at maximum for Graphics Card, RAM and maybe hard drive.
    Machine Name: iMac G5
    Machine Model: PowerMac8,1
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 1
    CPU Speed: 1.6 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 1 GB
    Bus Speed: 533 MHz
    Boot ROM Version: 5.2.2f2
    Graphics
    Chipset Model: GeForce FX 5200
    Type: Display
    Bus: AGP
    Slot: AGP
    VRAM (Total): 64 MB
    Vendor: nVIDIA (0x10de)
    Device ID: 0x0329
    Revision ID: 0x00b1
    ROM Revision: 2103
    Displays:
    iMac:
    Display Type: LCD
    Resolution: 1440 x 900
    Depth: 32-bit Color
    Built-In: Yes
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    2 slots x 512MB
    DIMM0/J4000:
    Size: 512 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J4001:
    Size: 512 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    Hard Drive 74.41 GB
    Thanks and happy Ostara!
    blessed be
    twopaw

    Hello Niel
    Thanks. I didn't realize that I can get up to a TB! Wow! What type of TB do I buy, any suggestions of specific ones? Is there G5 specific Tb disks to install? Or just any as long as they have the right measurement size? And what size do I need to remain within?
    blessed be
    Samantha

  • Powermac 1.25 MDD one or two graphics cards for dual display?

    I currently have two displays running off of one ATI card. Would I be better off putting a second card in a free PCI slot to run display number two. I've noticed that the ATI card divides the 128 MB memory between the two displays. With a second card there would be more memory dedicated to each individual display.
    Is this worth it or not? I have the extra card which i believe is an ATA 9200 PCI card.
    Graphics/Displays:
    ATI Radeon 9000 Pro:
    Chipset Model: ATY,RV250
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4966
    Revision ID: 0x0001
    ROM Revision: 113-99703-135
    Displays:
    Apple Studio Display:
    Display Type: LCD
    Resolution: 1280 x 1024
    Depth: 32-bit Color
    Core Image: Not Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    CPD-200GS:
    Resolution: 1280 x 1024 @ 75 Hz
    Depth: 32-bit Color
    Core Image: Not Supported
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported

    on my mac I have a nVidia Geforce4 Ti 4600 128MB DDR 4x AGP.
    it has a dvi port and adc port.
    I have a 19" Samsung 900DF CRT connected to a DVI to VGA adpater that came with my G4 MDD.
    I also have a 17" Philips 107S CRT connected to an ADC to VGA adapter, that I bought for $28 from OWC.
    works great for me. extended desktop. I have photoshop menus and palettes on the smaller monitor and the main work screen on the larger.
    when i watch movies and stuff watch the movies on the larger monitor.
    when I use iMovie and After Effects, I do same as I do with Photoshop.
    If I wanted to, I could put a PCI graphics card in the next slot over from the AGP and run another monitor.
    that ATI Radeon 9200 PCI looks good... about $130 from OWC.
    but what I got works fine...

  • New power supply and graphic card for Compaq CQ3232L

    Hi all,
    I am using Compaq CQ3232L and would like to upgrade the graphic card with one of the HD 5770, Sapphire HD 5770 Vapor-X 1Gb 128Bit DDR5 to be exact.
    My current power supply (Bestec Model ATX01...) specs are:
    +12V/11A, peak 13A
    +5V/10A, +3.3V/10A,
    -12V/0.3A, 180W according the manual.
    I've been looking a replacement for the power supply but not sure which one will fit the case? And how much power will be need to run the Sapphire card and future upgrade (Blu-Ray drive and another HDD)?
    Regards,
    Eko

    WSH, besides measuring the PSU, you should assure that there is sufficient space for the video card.  Open the case.  Measure from the edge of the case to the opposite side of the motherboard where the PCIE slot is located.  This is the approximate length of the card that will fit.
    Also, I like OCZ and Corsair PSU's.  They are both enthusiast/gamer manufacturers.  Their products will provide clean, stable power for your system.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Where can I get a new replacement motherboard and graphics card for HP Tx2 touchsmart 1340ea? Cost?

    my computer has been getting either blue screen of death, or your machine has been turned off to save your computer or pixels jumping around across screen, so on white screen was getting streaks of blue from top to bottom and on black streaks of red dancing about, OR no screen at all - blank. 
    Now machine won't even boot up.  This all happened both on cable and wireless.   Product no VJ667EA #    TX2 Touchsmart 1340ea.
    There have been no upgrades of hardware , and on software front only thing is regular updates of windows.  It was running Windows 7 64 bit professional.
    It is now totally dead.  If you try to boot up you get the electric symbol light up, and caps lock and end /number lock light up and flash... thats it.
    We just tried to blow out dust that is all.

    Hi,
    This i one source:
      http://www.ebay.com/sch/i.html?_nkw=hp+touchsmart+tx2+motherboard
    Please also read this:
      http://answers.yahoo.com/question/index?qid=20100128052514AAuoHyx
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Want to add Video and Graphic Card to my computer system

    I Notice that one of the users' in the Apple discussion Board is Listed, (AndyO) he has help me many times in the Past and was succesful in my problrm solution, would he might be able to help me with this?
    I had Purchased the Game Spore Creature Creator the Starter Kit which is just the Creature creator game and not the actual game itself. I wasn't able to install the the game on my computer because I don't have the right or not at all Video and Graphic Card install on my computer. I had Contacted the Company "EA" that puts out the Game Spore, this is what they said what the game requirements are: The minimum system requirements for Spore and Spore the Galactic Edition for Mac are as follows:
    * Mac OS X 10.5.3 Leopard or higher
    * Intel Core Duo Processor
    * 1024 MB RAM
    * At least 345 MB of hard drive space for installation, plus additional space for created creatures. (260 MB for the Trial Edition)
    * Video Card - ATI X1600 or NVidia 7300 GT with 128 MB of Video RAM, or Intel Integrated GMA X3100
    This game will not run on PowerPC (G3/G4/G5) based Mac systems (PowerMac).
    For computers using built-in graphics chipsets, the game requires at least: an Intel Integrated Chipset GMA X3100 or Dual 2.0GHz CPUs, or 1.7GHz Core 2 Duo, or equivalent
    Supported Video Cards
    ATI Radeon(TM) series
    * X1600, X1900, HD 2400, HD 2600
    NVIDIA GeForce series
    * 7300, 7600, 8600, 8800
    Intel(R) Extreme Graphics
    * GMA X3100
    and that I need to upgrade my system. Basically I need; ATI Radeon 1600 or NVIDIA Geforce 7300 and a INTEL Extreme Graphic Video Card-GMA X3100, in order to be able to install and play this game. Since I already have this game, I would like to be able to upgrade my computer system which brings me to ask; does somone know or refer me to a web site that has and sells these Video and Graphic Card and supports for the Mini Mac?
    Plus they say that I need a 1020 of MB of Ram, I Have already found that 1024 MB of Ram but I just need those Video and Graphic Cards for my computer system. I am adding my computer system Profile to my discussion board to show you what I have on my system, would you be able to tell me if I would be able to add these Video and Graphic card and the memory or Ram 1024 to my computer system?
    Note: Here is a web site that I am looking at to add the 1024 MB of Ram to my computer system:
    http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=24188 41&CatId=2453
    what do you think?
    Here is part a copy info of my computer system Profile:
    Trisha Foster’s Mac mini
    10/10/08 5:39 PM
    Hardware:
    Hardware Overview:
    Model Name: Mac mini
    Model Identifier: Macmini2,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MM21.009A.B00
    SMC Version: 1.19f2
    Serial Number: YM8073Q**
    Network:
    AirPort:
    Type: AirPort
    Hardware: AirPort
    BSD Device Name: en1
    IPv4 Addresses: 169.254.247.182
    IPv4:
    Addresses: 169.254.247.182
    Configuration Method: DHCP
    Interface Name: en1
    Subnet Masks: 255.255.0.0
    IPv6:
    Configuration Method: Automatic
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    Ethernet:
    MAC Address: 00:1f:5b:3e:ce:93
    Media Options:
    Media Subtype: Auto Select
    Bluetooth:
    Type: PPP (PPPSerial)
    Hardware: Modem
    BSD Device Name: Bluetooth-Modem
    IPv4:
    Configuration Method: PPP
    IPv6:
    Configuration Method: Automatic
    Proxies:
    FTP Passive Mode: Yes
    Ethernet:
    Type: Ethernet
    Hardware: Ethernet
    BSD Device Name: en0
    IPv4 Addresses: 192.168.1.102
    IPv4:
    Addresses: 192.168.1.102
    Configuration Method: DHCP
    Interface Name: en0
    NetworkSignature: IPv4.Router=192.168.1.1;IPv4.RouterHardwareAddress=00:21:29:c3:12:ae
    Router: 192.168.1.1
    Subnet Masks: 255.255.255.0
    IPv6:
    Configuration Method: Automatic
    DNS:
    Domain Name: cruzio.com
    Server Addresses: 74.220.64.45, 74.220.64.55
    DHCP Server Responses:
    Domain Name: cruzio.com
    Domain Name Servers: 74.220.64.45,74.220.64.55
    Lease Duration (seconds): 0
    DHCP Message Type: 0x05
    Routers: 192.168.1.1
    Server Identifier: 192.168.1.1
    Subnet Mask: 255.255.255.0
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    Ethernet:
    MAC Address: 00:16:cb:af:11:7f
    Media Options: Full Duplex, flow-control
    Media Subtype: 100baseTX
    FireWire:
    Type: FireWire
    Hardware: FireWire
    BSD Device Name: fw0
    IPv4:
    Configuration Method: DHCP
    IPv6:
    Configuration Method: Automatic
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    Ethernet:
    MAC Address: 00:1f:5b:ff:fe:17:17:2a
    Media Options: Full Duplex
    Media Subtype: Auto Select
    Software:
    System Software Overview:
    System Version: Mac OS X 10.5.5 (9F33)
    Kernel Version: Darwin 9.5.0
    Boot Volume: Macintosh HD
    Boot Mode: Normal
    Computer Name: Trisha Foster’s Mac mini
    User Name: Trisha Foster (tiger)
    Time since boot: 59 minutes
    ATA:
    ATA Bus:
    PIONEER DVD-RW DVR-K06:
    Capacity: 423.4 MB
    Model: PIONEER DVD-RW DVR-K06
    Revision: Q614
    Removable Media: Yes
    Detachable Drive: No
    BSD Name: disk2
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Low Power Polling: Yes
    Mac OS 9 Drivers: No
    Partition Map Type: Unknown
    S.M.A.R.T. status: Not Supported
    Volumes:
    SPORE:
    Capacity: 368.7 MB
    Media Type: CD-ROM
    Writable: No
    File System: ISO Rockridge
    BSD Name: disk2s0
    Mount Point: /Volumes/SPORE
    Audio (Built In):
    Intel High Definition Audio:
    Device ID: 0x83847680
    Audio ID: 8
    Available Devices:
    Headphone:
    Connection: Combo
    Speaker:
    Connection: Internal
    Line In:
    Connection: Combo
    S/P-DIF Out:
    Connection: Combo
    S/P-DIF In:
    Connection: Combo
    Bluetooth:
    Apple Bluetooth Software Version: 2.1.0f17
    Hardware Settings:
    Trisha Foster’s Mac mini:
    Address: 00-1f-5b-72-12-aa
    Manufacturer: Cambridge Silicon Radio
    Firmware Version: 3.1965 (3.1965)
    Bluetooth Power: On
    Discoverable: Yes
    HCI Version: 3 ($3)
    HCI Revision: 1965 ($7ad)
    LMP Version: 3 ($3)
    LMP Subversion: 1965 ($7ad)
    Device Type (Major): Computer
    Device Type (Complete): Macintosh Desktop
    Composite Class Of Device: 3154180 ($302104)
    Device Class (Major): 1 ($1)
    Device Class (Minor): 1 ($1)
    Service Class: 385 ($181)
    Requires Authentication: No
    Services:
    Bluetooth File Transfer:
    Folder other devices can browse: ~/Public
    Requires Authentication: Yes
    State: Enabled
    Bluetooth File Exchange:
    Folder for accepted items: ~/Downloads
    Requires Authentication: No
    When other items are accepted: Ask
    When PIM items are accepted: Ask
    When receiving items: Prompt for each file
    State: Enabled
    Incoming Serial Ports:
    Serial Port 1:
    Name: Bluetooth-PDA-Sync
    RFCOMM Channel: 3
    Requires Authentication: No
    Outgoing Serial Ports:
    Serial Port 1:
    Address:
    Name: Bluetooth-Modem
    RFCOMM Channel: 0
    Requires Authentication: No
    Diagnostics:
    Power On Self-Test:
    Last Run: 10/10/08 4:41 PM
    Result: Passed
    Disc Burning:
    TEAC CD-W540E:
    Firmware Revision: 1.0F
    Interconnect: FireWire
    Burn Support: Yes (Apple Supported Drive)
    Cache: 8192 KB
    Reads DVD: No
    CD-Write: -R, -RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw
    Media: Insert media and refresh to show available burn speeds
    PIONEER DVD-RW DVR-K06:
    Firmware Revision: Q614
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media:
    Type: CD-ROM
    Blank: No
    Erasable: No
    Overwritable: No
    Appendable: No
    FireWire:
    FireWire Bus:
    Maximum Speed: Up to 400 Mb/sec
    OXFORD IDE Device LUN 0:
    Manufacturer: Oxford Semiconductor Ltd.
    Model: 0x42A258
    GUID: 0x1D200500648AF
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    OXFORD IDE Device LUN 0 Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x444133
    Product Revision Level: 1.0F
    Sub-units:
    OXFORD IDE Device LUN 0 SBP-LUN:
    Graphics/Displays:
    Intel GMA 950:
    Chipset Model: GMA 950
    Type: Display
    Bus: Built-In
    VRAM (Total): 64 MB of shared system memory
    Vendor: Intel (0x8086)
    Device ID: 0x27a2
    Revision ID: 0x0003
    Displays:
    L1916HW:
    Resolution: 1280 x 800 @ 60 Hz
    Depth: 32-bit Color
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Memory:
    BANK 0/DIMM0:
    Size: 512 MB
    Type: DDR2 SDRAM
    Speed: 667 MHz
    Status: OK
    Manufacturer: 0xAD00000000000000
    Part Number: 0x48594D503536345336344350362D59352020
    Serial Number: 0x0000**
    BANK 1/DIMM1:
    Size: 512 MB
    Type: DDR2 SDRAM
    Speed: 667 MHz
    Status: OK
    Manufacturer: 0xAD00000000000000
    Part Number: 0x48594D503536345336344350362D59352020
    Serial Number: 0x00001*
    Power:
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 10
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On LAN: Yes
    Hardware Configuration:
    UPS Installed: No
    Printers:
    Canon MP830:
    Status: Idle
    Print Server: Local
    Driver Version: 4.8.3
    Default: Yes
    URI: usb://Canon/MP830?serial=19702D
    PPD: Canon MP830
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA:
    Intel ICH7-M AHCI:
    Vendor: Intel
    Product: ICH7-M AHCI
    Speed: 1.5 Gigabit
    Description: AHCI Version 1.10 Supported
    Hitachi HTS541612J9SA00:
    Capacity: 111.79 GB
    Model: Hitachi HTS541612J9SA00
    Revision: SBDAC7MP
    Serial Number: SB2EF9L7G3**
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 111.47 GB
    Available: 63.14 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /
    USB:
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x27cc
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0xfd
    Keyboard Hub:
    Version: 94.15
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Apple, Inc.
    Product ID: 0x1006
    Serial Number: 000000000000
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB RECEIVER:
    Version: 25.10
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0xc50e
    Vendor ID: 0x046d
    Apple Keyboard:
    Version: 0.69
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Apple, Inc
    Product ID: 0x0220
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    iPod:
    Version: 0.01
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Apple Inc.
    Product ID: 0x1291
    Serial Number: aa1186ca1738fd28eef1eeb1b22754********
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB2.0 Hub:
    Version: 7.02
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Product ID: 0x0606
    Vendor ID: 0x05e3
    USB 2.0 3.5" DEVICE:
    Capacity: 153.39 GB
    Removable Media: Yes
    Detachable Drive: Yes
    BSD Name: disk1
    Version: 0.01
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Macpower Technology Co.LTD.
    Mac OS 9 Drivers: Yes
    Partition Map Type: APM (Apple Partition Map)
    Product ID: 0x0073
    Serial Number: BC0*
    S.M.A.R.T. status: Not Supported
    Vendor ID: 0x0dc4
    Volumes:
    miniStack:
    Capacity: 153.26 GB
    Available: 42.96 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s10
    Mount Point: /Volumes/miniStack
    MP830:
    Version: 1.15
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: Canon
    Product ID: 0x1713
    Serial Number: 197*
    Vendor ID: 0x04a9
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x27c8
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0x1d
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x27c9
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0x3d
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x27ca
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0x5d
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x27cb
    PCI Revision ID: 0x0002
    PCI Vendor ID: 0x8086
    Bus Number: 0x7d
    Bluetooth USB Host Controller:
    Version: 19.65
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Apple, Inc.
    Product ID: 0x8205
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    IR Receiver:
    Version: 1.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Apple Computer, Inc.
    Product ID: 0x8240
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    AirPort Card:
    AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x168C, 0x86)
    Wireless Card Locale: USA
    Wireless Card Firmware Version: 1.4.4
    Current Wireless Network: Trisha's iPod
    Wireless Channel: 11
    Firewall:
    Firewall Settings:
    Mode: Allow all incoming connections
    Locations:
    Automatic:
    Active Location: Yes
    Services:
    AirPort:
    Type: IEEE80211
    BSD Device Name: en1
    Hardware (MAC) Address: 00:1f:5b:3e:ce:93
    IPv4:
    Configuration Method: DHCP
    IPv6:
    Configuration Method: Automatic
    AppleTalk:
    Configuration Method: Node
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    IEEE80211:
    Join Mode: Automatic
    JoinModeFallback: Prompt
    PowerEnabled: 1
    PreferredNetworks:
    SecurityType: Open
    SSID_STR: Apple Store
    Unique Network ID: 4BCBEE2D-83B9-4CC1-B110-8D0E8E5DF49C
    SecurityType: Open
    SSID_STR: linksys
    Unique Network ID: F2551FD6-95A7-4F98-9F7F-758A89DBD931
    Bluetooth:
    Type: PPP
    IPv4:
    Configuration Method: PPP
    IPv6:
    Configuration Method: Automatic
    Proxies:
    FTP Passive Mode: Yes
    PPP:
    ACSP Enabled: No
    Display Terminal Window: No
    Redial Count: 1
    Redial Enabled: Yes
    Redial Interval: 5
    Use Terminal Script: No
    Dial On Demand: No
    Disconnect On Fast User Switch: Yes
    Disconnect On Idle: Yes
    Disconnect On Idle Time: 600
    Disconnect On Logout: Yes
    Disconnect On Sleep: Yes
    Idle Reminder: No
    Idle Reminder Time: 1800
    IPCP Compression VJ: Yes
    LCP Echo Enabled: No
    LCP Echo Failure: 4
    LCP Echo Interval: 10
    Log File: /var/log/ppp.log
    Verbose Logging: No
    Ethernet:
    Type: Ethernet
    BSD Device Name: en0
    Hardware (MAC) Address: 00:16:cb:af:11:7f
    IPv4:
    Configuration Method: DHCP
    IPv6:
    Configuration Method: Automatic
    AppleTalk:
    Configuration Method: Node
    Proxies:
    Exceptions List: *.local, 169.254/16
    FTP Passive Mode: Yes
    FireWire:
    Type: FireWire
    BSD Device Name: fw0
    Hardware (MAC) Address: 00:1f:5b:ff:fe:17:17:2a
    IPv4:
    Configuration Method: DHCP
    IPv6:
    Configuration Method: Automatic
    Proxies:
    Exceptions List: *.local, 169.254/16
    Can someone Please help me with any suggestions or otherwisde I will have to go to a Apple store and ask for help there.
    Thank You,
    Trisha Foster
    <Edited by Moderator>

    Hi Trisha,
    The only modern Mac's with video cards are the Mac Pro and Xserve (server) systems. They both are priced quite a bit higher than any Mac Mini.
    Some systems, like the Mac Book Pro laptop can be ordered with different graphics cards, but that has be done when the system is built, as it is not replaceable once the system is built. To find out which systems, go to store.apple.com. For each system that you select, you can see if there's an option for a better video card.
    David

  • Processor and Graphics query for G4 PowerMac 'Digital Audio'

    Hey all, two questions here...
    Question 1
    Ive got ANOTHER new processor and graphics card for my Digital Audio G4. The processor i had in it before was a Sonnet Encore ST/G4 1GHz, ive replaced this with the same make of processor but at 1.4GHz. The processor works fine and the machine runs fine, but it isn't listed properly in the system profilers...
    In OS9 it's speed is described as "about 656Mhz" and in OSX its described as 0MHz!
    Im not too worried since everything seems to be working fine, but i want to be sure that its not going to suddenly blow up on me, and if anyone else has had things like this happen with these processors or configurations. Ive still got the 1GHz should anything go wrong, but newer, more powerful stuff is always good!
    Question 2
    The new graphics card i put in is a ATI Radeon 9600 Pro PC & Mac Edition. Ive read a few things on the internet about it sometimes not working with DA Power Macs but thought id chance it anyway, i can always sell it on if it didn't work...
    Well the card works in both OS9 and OSX and displays everything fine, its recognised by both systems and everything. The only problem is i can't change the display settings, on both systems the only display option ive got is x736 (or whatever it is thats closest to it), there are no other options available, i can't choose anything else in the Recommended menu, not can i change from Thousands to Millions of colours.
    Of course its generally agreed that these cards work better on G5s than G4s, despite it saying on the box that it supports G4s. Ive also downloaded the ATI Displays Control Panel to see if i can control it that way, but to no avail. Does anyone have any info or words of advice on this?
    Cheers all!

    Good to hear, thanks!
    Do follow the advice to add as much cooling as you can, & use the best Ceramique Thermal Paste you can find.
    Did you clear all the Caches yet?
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
    Look for the 10.3 version of AppleJack 1.4.3.1 (326 KB) (For Mac Jaguar and Panther), here...
    http://mac.oldapps.com/applejack.php

  • Processor and graphics card upgrade for hp dc5100 MT(EF633US)

    Can someone kindly tell me a variety of Intel processors and graphic cards which i can install in my pc coz right now i'm using Intel pentium 4 CPU 2.80 GHz and Intel 82915G/GV/910GL express chipset. but i would like to upgrade to a faster processor and a graphics card which can play games which require large graphic memory (eg FIFA 2013,GTA 5.etc)

    Hi:
    Personally, I wouldn't invest the money to upgrade that PC.
    You would be better off getting an off lease newer dc5800 MT or dc7800/dc7900 model that has a PCIe x16 video slot.
    The killer for your model is you can only install a PCI graphics card.
    Very inefficient and pretty expensive for what you get in return.
    After you install the required microcode update, the best processor I know for sure you can install would be the P4 650.
    Below is the link to the quickspecs.  The supported processors are listed on page 7.
    I do not know of anyone who that has installed the 651 or 661 processors and got them to work--even though the specs state they are supported.
    You can try the 651 or 661 and if you do, please let me know if they worked for you.
    http://h18000.www1.hp.com/products/quickspecs/12145_ca/12145_ca.pdf

  • Graphics Card for Lightroom and also CS2 and Maybe CS3

    Hi. I am still using a PC I build about 3 years ago with a ASUS P4PE mother board. It has been very good but I am wondering if it is best to now change to a later PC or, upgrade.
    I have used 1GB Ram and just got another IGB to install, but my real concern is with the Graphics Card. At present I have a Matrox Millenium G550 which as I recall has just 32MB Ram. At the time this was considered one of the best, if not the best card for 2D Images. However, I now see 256 and 512 Ram cards as norm, but they always refer to being cards for games. I never have and never will wish to play any games on a PC. So advice needed please, what is considered the best Graphics Card for Photoshop CS2 and now Lightroom?
    Incidently my Processor is just a P4 2.66 this has served me well so far, but!! I maywell get another PC but for now I feel I just want to try the best upgrades I can.
    This is my first post here and look forward to your answers and advice.
    All the best, Ron dps.

    The high-powered graphic processors being sold today are fantastic for games but offer zero improvement for digital photo editing. What you have is more than enough. Increasing your SDRAM to 2GB will help the most.
    Dave Huss

  • What's the best graphic card for FCP X and a Mac Pro (early) 2008?

    I have a Radeon HD 3870 in my Mac Pro, it seems that I cannot use this configuration with Final Cut Pro X. Then what's the best graphic card for FCP X usable in a Mac Pro (early) 2008?
    Thx,
    Phil

    You can get a 5770 radeon ATI MAC card
    Avoid the 5770 cards on ebay and Amazon - many are black market or manipulated cards. 
    Buy it from Apple online store or B&H photo or Macconection
    And in my case, I was able to sell my old 2600 XT card on ebay for $65 and put that money toward a 5770 card (Which was about $230 minus the $65)
    I installed the 5770 in my early Mac Pro 2 x 2.8 and it works great

  • I need an airport and bluetooth card for my dual 2.3 GHz powerPC G5. However, not sure of which card

    I need an airport and bluetooth card for my dual 2.3 GHz powerPC G5. However, not sure of which card can some one tell me which card or cards I need?

    Hardware Overview:
      Model Name:          Power Mac G5
      Model Identifier:          PowerMac11,2
      Processor Name:          PowerPC G5 (1.1)
      Processor Speed:          2.3 GHz
      Number Of CPUs:          2
      L2 Cache (per CPU):          1 MB
      Memory:          4 GB
      Bus Speed:          1.15 GHz
      Boot ROM Version:          5.2.7f1
      Serial Number (system):          G854917PR6V
      Hardware UUID:          00000000-0000-1000-8000-00145165812C
    How do I know which if I have an early or older?
    Apple 5714:
      Name:          bcom5714
      Type:          network
      Driver Installed:          Yes
      Bus:          PCI
      Slot:          GIGE
      Vendor ID:          0x14e4
      Device ID:          0x166a
      Subsystem Vendor ID:          0x106b
      Subsystem ID:          0x0085
      Revision ID:          0x0003

  • What temperatures are acceptable for the CPU and Graphics card?

    I have Intel Xeon X5400 series CPUs and a Nvidia graphics card.  
    It is interesting to monitor the temperatures but only if you know what temps matter...
    What temperatures are acceptable for the CPU and Graphics card? 
    I was not sure if this is the document of choice for the CPU or not. I was not sure I was decifering it correctly either. 
    http://download.intel.com/design/xeon/datashts/318589.pdf
    Any one know what we should be watching for as far as what is too hot? 
    I have a ThinkStation D10.
    Did not see this in the user manual but could have missed it. 

    I found my specs:
    Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz
    You are correct. An E series. 
    I was so focused on the upgrade to the X5420 that I forgot what the system came with. 
    So what should I set my sensor high value to on my sensor program that shows up on the panel (taskbar)?
    For the E5405 or the X5420? 
    SIDE NOTE: where can I get 2 E5420s or better cheap? 
    Not ready to give up my filters just yet. I live in a dust factory! 
    My girl friend sews really nice bags but creates sewing dust and fuzz. 
    And well there are natural fibers everywhere...
    So other than the the X5492 (150watts),  the X5482, X5472,  X5470, X5460, X5450 are all 120 watts.
    Like the bulk of the X series...
    The E5405, E5410, E5450, E5440, E5420, E5430, E5470, E5462, E5472 are all 80 watts.
    The L series seems to all be 50 Watts.  
     For many the other Processors see this:
    http://www.intel.com/products/processor/xeon5000/specifications.htm?iid=products_xeon5000+tab_specs
    Message Edited by VitalBodies on 12-06-2008 08:46 PM
    Message Edited by VitalBodies on 12-06-2008 09:03 PM

  • I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

    I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
    Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
    Thanks,
    Kevin

    I recommend you install nothing older than the Apple-firware 5770, about US$250.
    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

Maybe you are looking for

  • Payment terms GL for discount received

    hi all, i have defined payment terms and have assigned the payment terms to the customer master record and successfully posted the document too. but i dont see any amount in the discount given account . i have assigned the GL account in the transacti

  • I can't open my word documents?

    I can't open my word documents on my mac book pro. neither can I open the icon of W.Who can help?

  • Troubles with Windows 7 Enterprise and Web Dynpro for ABAP

    Hello together, we've installed Windows 7 Enterprise and IE 8 and are using Web Dynpro for ABAP. Since this installation on one Client, it is not possible to use the WD application - the sites seems to be frozen! I know the fact, that SAP will suppor

  • Internal update server and flash player 12

    We've been using an internal update server and a deployed mms.cfg to point internal client machines to a local webserver hosting Flash Player updates extracted from the background update .cab file, as detailed in the Administration Guide. This has be

  • Iterate through HashMap ?

    Hello, is it possible to iterate through a Java HashMap somehow? Or is there any other iterable data structure i could use (I need to get objects from the data structure by using an integer value as key ) ? thanks!