MB-848P-VMSI 848 NEO-V P4 Intel 848P FSB800 SATA A&L Motherboard

I am building a machine using the MB-848P-VMSI 848 NEO-V P4 Intel 848P FSB800 SATA A&L Motherboard with 512M of RAM, a P4 1.5ghz Socket 478 CPU and an older Matrox Marvel 32M AGP video card.
I put it all together and attempted to boot, but I get no post-beep code and no video. However all fans and hard drives do spin up. Usually I am able to determine the problem by process of elimination by removing or swapping CPU or RAM, but I get no results. No matter what I do, no sign of video and no post-beep codes.
Any suggestions?

Your mobo does not support the 1.5GHz Williamatte CPU that you want to run.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=596&kind=1

Similar Messages

  • P35 Neo-F and Intel Core2Quad Q9550 E0 Stepping

    Hello ! I got some problems with my computer since i've changed the cpu.
    before i had an intel core2duo e6750 on my msi p35 neo-f board and everything worked fine !
    a few months ago i wanted to "tune" my computer a bit , so i've bought a new cpu -> core2quad q9550 e0 stepping
    my computer didnt want to work (boot) with this cpu , so i changed to my old cpu and updated my bios version , cause i thougt it should help, considering the informations on msi page !
    i've updated to ami 1.9 without using msi live update, using your tool from this forum. ofc i did the cmos reset etc pp, loaded bios defaults.
    then i've inserted my new cpu (q9550) and it seemed to work !!!
    it seemed to work for a few days.../hours...
    since then i was getting bluescreens! irregular bluescreens, no matter what i was doing on my computer. bluescreen messages were different nearly each time. sometimes there was something said about "sys32..."..i dont rly remember. next time i will write it down
    i've checked my RAMs with some tools , checked my HDDs with tools, everything fine ! then i wanted to check my cpu with prime95 using a torture test (blend) and my computer crashed directly (short bluescreen) and rebooted ! so i am quite sure that my new cpu / bios configuration / version is the problem !
    so my next idea was to reinstall my windows 7 prof. , considering some posts on the www.
    well it didnt help. today , one day after reinstalling windows, i got a bluescreen when booting windows. just when booting , without doing anything, next boot worked and computer didnt crash since then, 2 hours ago. so as you can see these crashes/bluescreens are really irregular !
    now i am on the msi page again , looking at the cpu support list for my mainboard.
    ->
    Core 2 Quad     Yorkfield     SLB8V     Q9550     333     2.83     12M      N/A     E0      95     7360v21.zip
    so i should flash my bios to 2.1 ???? i've read something about different versions of my mainboard on this board , some are able to work with bios 2.1 , some others are not !
    this thread :
    https://forum-en.msi.com/index.php?topic=139992.msg1046500;topicseen
    now i dont know what to do anymore....flash to 2.1 or not ? where can i check whether i can flash to 2.1 ???
    is it possible that my power supply is too weak ?
    my system :
    windows 7 prof 64 bit
    500W BeQuiet Straight Power
    MSI Neo P35-F
    Intel Core2Quad Q9550
    8Gb DDR2 RAM
    Sapphire HD 5850 Toxic 1Gb DDR5
    as i said my system worked fine before changing the cpu, so my issues should come from the new cpu imho
    thanks a lot !
    if you need more information i will provide them ofc !

    Quote from: daburn3d on 28-July-10, 19:26:20
    1.A is newer then 1.9 ?????
    i dont understand why i cant flash to 2.1
    http://de.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1215
    this page sais i can / should to run my q9550 ?
    is it possible that flashing to 1.A could fix my problems ?
    Quote
    1.A is newer then 1.9 ?????
    Yes, its newer than 1.9 and also latest version.
    Quote
    i dont understand why i cant flash to 2.1
    http://de.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1215
    this page sais i can / should to run my q9550 ?
    Because this is wrong board! Not yours.
    This is the correct one that you should look:
    http://eu.msi.com/index.php?func=prodcpu2&prod_no=1224&maincat_no=1
    Quote
    is it possible that flashing to 1.A could fix my problems ?
    Yes, its possible

  • [875P Neo Series] problems powering up when sata on ich5r is enabled

    Hello, there is a problem on my 875 neo fis2r motherboard.
    In the "integrated peripherals"-->"on chip ide" section on the bios (v2.4), when i leave the option "sata keep enabled" to yes, i have problems on system power up.
    I switch on my computer and there might be half a minute or more until i here the "beep" on the motherboard and boot from my HD.
    Could anybody know what is wrong?
    Thanks in advance for your help
    Mobo: MSI 875P NEO-FIS2R
    CPU: Intel P4 Northwood 3.0Ghz, 800FSB, 512KB L2 Cache
    RAM: 1x512mb kingston PC3200 CL2.5
    HDD: 1x160Gb Maxtor 8mb 7,200RPM S-ATA
    Optical: 1x Plextor 716a, 1x Plexwriter Premium, 1xPlextor 116A
    Floppy: Mitsumi MTM43W 1.44MB 3.5in
    Display: ATI Radeon 9800XT 256mb
    Sound: Soundmax digital audio
    Case: ANTEC Performance Plus Series PlusView1000AMG
    Power : Antec TruePower 550
    Fans: 4x 80mm
    Display : LG Flatron F700P

    Hey Grigo,
    For that set up, I would recommend trying the following settings:
    On Chip Operate Mode:  Native
    ATA Configuration: S-ATA Only
    SATA Keep enabled : Yes
    PATA Keep enabled : Yes
    That's how I set up my old 875P without trouble when I installed a pair of drives in RAID 0.  In your sig I don't see two drives, so I'm not sure what else to provide. (whether you are building a new comp or upgrading to RAID 0 etc)
    For further reference, have a look at Vango's guide to RAID setup here: https://forum-en.msi.com/index.php?topic=38845.0

  • K8m neo-v mobo dont detect seagate sata hdd st3808110as

    k8m neo-v mobo dont detect seagate sata hdd st3808110as 80gb
    bios dont detect the sata hdd.
    any help would be appreciated thanks.

    so thats it.
    thanks alot tiresmoke. i really appreciate it.
    btw. does the seagate sata hdd have a different jumper from the ide hdd? because my seagate hdd dont have any jumpers. i tried using the ide jumper and it wont fit.

  • Intel(R) ESB2 SATA RAID Controller not working out of the box

    Dear all,
    I'm using, for my tests, an old server with a supermicro X7DBN Server motherboard.
    This motherboard comes with an embedded Intel(R) ESB2 SATA RAID Controller.
    When I try a native installation from the technical preview DVD it sees the RAID1 volume that has been created (2 disk mirror) but when I select it to proceed with the installation there is an unknown error stating that it's impossible to write to this disk.
    The same installation works perfectly with 2012R2 and the out of the box driver provided bin the install media.
    An update from the previously installed 2012R2 to the Windows Server Technical Preview also works without problem.
    It would make sens for MS to revert to the driver version embedded in 2012R2 for Intel(R) ESB2 SATA RAID Controller which is:
    Name : Intel(R) ESB2 SATA RAID Controller
    Date : 10.08.2010
    Version : 8.6.2.1025
    inf section : iaStor_Inst_RAID
    Device ID : PCI\VEN_8086&DEV_2682&CC_0104

    Hi,
    Thank you for the information. As you said from the behavior it seems that the build-in drivers of Windows Server Technical Preview will not work with the specific motherboard hence the RAID1 cannot work well. 
    I'll log the issue down. 
    If you have any feedback on our support, please send to [email protected]

  • MSI 865PE Neo 3-F + Intel P4 640

    Hello,
    I have a problem with a MSI 865PE Neo 3-F motherboard combined with an Intel 640 cpu.
    I cannot install Windows XP SP2, everytime at 35 minutes remaining, the computer resets itself.
    First I had bios v5.0, and couldn't flash to v5.2, after using a Intel 520 cpu I could flash to v5.2, but the problem remains.
    Tried several ram-modules, hdd, vga-cards, psu's, ...
    Anyone know if there is a solution for this ?  Maybe a new bios-version or beta-bios ?
    Thanks,
    Jan

    Two things you could test;
    Run memtest86 for any mem.errors ( you can do this by creatings a DOS disc and boot from floppy )
    http://www.memtest.org/#downiso
    Not sure about the 410w chieftec - Is that a ATX2.0 PSU with 24pin connector ? ( 12v1 =15amp + 12v2=18 amps)
    Do you use a 24-20 pin adapter ?
    If I´m correct, your MoBo still got the 20-pin MoBo + 4-pin cpu powerconnector, and too be sure about the power issue, I would have prefered a PSU with some 450w and a singel 12v line with minimum 22 amps on the 12v line. The newer P4/ Prescott cpu´s needs a lot of 12v power.- Be sure that both 20pin and 4pin are firmly in place on the MoBo.
    Most highly recommended PSU´s are Enermax, Antec, Tagan, OCZ, but there are others as well as long as you avoid the cheap ones -
    PS - about mem.voltage it would be 2.7v not 1.7v as you wrote, but assume this was only a typingfault.
    775 socket cpu installation
    http://www.msi.com.tw/html/service/techexpress/mainboard/7028/page2.htm

  • [875P Neo Series] pro2kxp (INTEL(R) PRO1000 CT Network Connection Diagnostics Utility

    Hi
    I am using the pro2kxp (INTEL(R) PRO1000 CT Network Connection Diagnostics Utility which not only installs the driver but also a network connection diagnostics utility.
    The driver date as shown in Device Manager is 29/08/2003 and the driver version is 7.2.19.0.  Does anyone know if there is a later version of this utility (including driver)?
    File version as shown by right-clicking the .exe is:  4.0.100.1124.
    Regards
    Dave

    Hi shrince
    That's the one and just what I was looking for.   
    Many thanks m8.   
    Regards
    Brave01Heart

  • MSI P43 NEO-F with Intel core 2 duo E2200 2.2Ghz Virtualization Enabling.

    As the topic says i bought some new hardware for a server.
    The bios version is 1.2 from 061108 , the intergrated network card doesnt work, but thats not my main problem though.
    Im trying to find an option to enable full virtualization support since Xen complains when i try to install a windows machine in opensuse.
    I cant for the life of me find an option to enable it, and i guess it has with the version of my bios todo since neither the motherboard or the cpu is old and should support virtualization.
    Can someone confirm that a bios upgrade will give me this option? and can i use the upgrade tool in a windows environment instead of the complicated way of booting of a floppy and install the new bios?
    /Regards

    Hello,
    Virtualization Support should be enabled by default.  If you can't find an option in BIOS, there is probably none.
    I think the main problem is your processor itself.  In Intel's own naming & classification system, the E2200 is not a "Core 2 Duo" processor, but a "Pentium Dual-Core" processor and none of the Dual-Core Pentium CPUs supports "Intel® Virtualization Technology".  You can look yourself, here:
    http://processorfinder.intel.com/List.aspx?ProcFam=2841

  • Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

          
    I originally posted this question here:
    answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
    and was asked to post it on this forum...
    I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
    it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
    up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power.  I have finally gone back the previous version 9926, which has its issues but no where near as bad
    as not having any network connectivity!  Does anyone have this issue and a workaround? 
    Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

    Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
    this... Thanks!
    I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
    (but I suspect not just the only culprit) in this above mentioned problem...
    10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
    is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
    laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
    or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
    I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop. 
    Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
    Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
    that has happened with the Cisco software install attempts under 10041.
    Another note: CISCO Anyconnect also has the issue.

  • K9AG Neo 2 Digital Questions about getting SATA to work

    Hello, I've recently build a machine with this board and I might be missing something but i've never worked with SATA before. When i bought my harddrives originally they were sata and per plugging them in to the board they weren't being recognized or even working. I've tried western digital and Maxtor on both this board and an ASUS board. In the end i went and traded them for IDE hdds, but i'm wondering is there something in the bios settings that i'm missing????
    MSI K9ag Neo 2 Digital
    AMD ATHLON 64 X2 5600+
    G SKILL 4GB (2x2GB) PC 6400
    Wd IDE 160 GB
    500W PSU

    Nope should works as is.
    "hdds, but i'm wondering is there something in the bios settings that i'm missing?"
    In "Integrated Peripherals", "On-Chip ATA Devices":
    PCI IDE BusMaster = Enabled {Optional, has no relationship with HDD detection. Recommended to be Enabled}
    On-Chip SATA Controller = Enabled
    RAID mode = IDE

  • Ordered a P35 Neo, where do I get the SATA drivers?

    Hi
    I ordered a computer with a MSI P35 Neo mainboard yesterday. It is going to be assembled by the company that I bought it from, so I was going to download the SATA drivers and put them on a floppy, since I'm not sure if the company that assembles the computer will send me the floppy with the drivers on it. However, when I looked at the driver page for the P35 Neo, http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1215 , there are no SATA drivers. Does this mean that I don't need any SATA drivers for Windows XP or Vista, or do I have to get them elsewhere?

    you are correct, you don't need SATA drivers.  they are fully supported in XP/Vista.
    The only time you'll need drivers is if you create a RAID setup.  but single drive setups are good to go.
    -=Mark=-

  • Intel chipset detects SATA as standard drive?

    does anyone have a clue for why it does that ?
    its a WDC 250gb SATA drive ..but it detects as standard drive by the intel controller

    it says that when i check info on the drive with programs
    i use  native mode
    SATA only
    PATA keep enabled
    is there any way i can check that the drive runs as SATA and not as standard drive?
    with the promise controller it shows SCSI device  ... and with intel  standard drive,
    or have i maby forgotten to install something ?

  • Advice - K8N Neo Plat users with *NEW* (NCQ) SATA Drives!

    Hi, you can see my specs in my signature, but basically the Maxtor DiamondMax Plus 9 SATA drive is playing up after a year of perfect use.
    An obvious replacement is the DiamondMax Plus 10... but...
    I know the nForce3 motherboard does NOT support native command queuing (NCQ)... but do I *STILL* need to install the nVidia SATA (IDE) drivers?? Currently I am using only windows IDE drivers (I uncheck the IDE drivers when installing nvidia system drivers).
    Also, are people still having problems running these hard drives on their motherboards?? (K8N Neo & Neo2) - or do all new "DiamondMax Plus 10" hard drives come with the updated BIOS?? (My motherboard BIOS is 1.4 - It is very very stable so I do not want to upgrade this).
    Basically - is there a better hard disk to go for with the K8N Neo Platinum? I want a fast, quiet SATA drive, around 160GB.
    thanks for your help 

    Quote from: kidscruff on 24-October-05, 10:07:07
    Also, are people still having problems running these hard drives on their motherboards?? (K8N Neo & Neo2) - or do all new "DiamondMax Plus 10" hard drives come with the updated BIOS?? (My motherboard BIOS is 1.4 - It is very very stable so I do not want to upgrade this).
    Is there a firmware (bios) update available on the DM10 drives? what version is it? where do i get it?
    (I got one of the first DM10's and can only run the drive on sata4 on my k8n neo2 plat)

  • 848p neov1 sata probs

    i have plugged in the drive i know it works but it aint detected

      :agrees:excellent problem solved. cant believe it was something that simpl

  • PROBLEM WITH PT880 Neo WHEN INSTALL NEW 36GB RAPTOR SATA HD

    I JUST BOUGHT NEW SYSTEM: PT880NEO, P4 3.2GHZ, 800MHZ, 512 KB L2 CACHE. I HAVE 2 PROBLEMS:
    1. WHEN I INSTALLED BRAND NEW WD 200GB ULTRA ATA/100 WITH WINDOW XP PRO, XP ONLY REGCONIZED MY HARD DRIVE: 127 GB ONLY EVEN I CONNECTED MY HD THROUGH PROMISE ULTRA 100 PCI CARD.
    2. WHEN I TRY TO INSTALL XP PRO ON THE OTHER BRAND NEW 36GB WD RAPTOR SATA, THE MOBO SYSTEM SAW THE HD BUT THE WINDOW XP DID NOT REGCONIZED MY SATA HD.  
    I REVIEWED SOME IDENTICAL PROBLEMS FROM THE FORUM BUT I AM STILL CONFUSING. ANYONE CAN SHOW ME EXACTLY WHAT SHOULD I DO. THANKS ALOT.

    first things first, read the Moan Guide, and also check out the Rules Of The Forum as the forum users will reply more often and faster.
    Hoping everything will boot up soon for ya.

Maybe you are looking for