MB Air cannot see TC 1T '09 while connected via WiFi and Ethernet.

I have a TC 1T 2009 7.4.1 that I have set up successfully with MB Pro and MB White. However I cannot set it up with MB Air v.1 which is connected to TC via WiFi AND Ethernet cable. Internet is fine (Safari) but no TM - when I run APU 5.4.1 it cannot discover the TC it is connected to.
I tried connecting after hard-reset (poke/power on), it would see the TM but then hang forever reading the configuration. So I set it up with MB Pro and MB White and both are now working fine with TC/TM. Then I tried MB Air and it failed.
The TC is connected via ethernet to Sagem router (bridged mode) which supplies WAN and DHCP, it has its own WiFi as well.

And by the way, Hi Everyone, how rude of me not to greet you in the post.
Thanks for any help!

Similar Messages

  • I have problem in osx 10.8 i cannot see the encoding option while connecting to the my pc server ?

    MR.Eric please help ?
    i have problem in osx 10.8 i cannot see the encoding option while connecting to the my pc server ?
    this option was in osx 10.6 see it  here 
    because if i create any file in Arabic name from osx 10.8 the others old mac os  see it only in unreadable letters ?
    please help
    thanks

    Aw geez, they sure have messed up OSX.
    Do you have a backup of 10.8.2?
    Maybe...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Cellular data being used while connected to WIFI and not in standby

    I am connected to my home WIFI on my iphone 4, but while my router is not connected to internet (so I should not have internet on my iphone), I noticed I am still receiving push notifications,
    I finally read here that while on standby, wifi is turned off and 3G is used, ok.
    now here is the problem, looking at the General>Usage>Cellular Usage, even if I am not on standby and I am using the phone, I have data usage (sent and recieved), I reopen the Celluar Usage and see the numbers are constantly increasing, and more strange is some (not all) of the push notification do come through (eg in my case for an app called FavFriends),
    another friend of mine has a simillar problem on iphone 4s.
    what is this celluar usage in the background?????

    from what I knew so far, iphone should not use the 3G if wifi is connected, eventhough there is no internet on that wifi,
    so in my case, if iphone is actually detecting no internet and switching to 3G, I should have internet on all apps (safari, etc..) which i dont, just data usage increasing with no internet in any apps (that is a 3G usage which is limited more than even when on standby),
    and if it is not supposed to switch, it brings another question, that if 3G is used when wifi connected (with no internet), are there any background 3G usage (push notifications, etc), while wifi has internet and it is supposed to utilize the wifi internet?
    so basically, I was under the assumption that 3G would not be used unless wifi is disconnected, regardless of internet access, and I dont find anything that says otherwise.

  • X-Fi Fatal1ty Pro cannot see 5.1 Dolby Digital input via Optical link (mods, please he

    X-Fi Fatalty Pro cannot see 5. Dolby Digital input via Optical link. I am pumping my Xbox360 through the Digital I/O dongle and every thing works OK using Dolby Stereo, outputing to my 5. analog speakers. However, it does NOT work when choosing Dolby Digital 5.. My SPDIF tab just says unknown input.
    Please help, this is very frustrating...

    Ok, for those who also wanted to know the outcome, I though I'd post.
    I was told that the dongle cannot decode 5. to analog, but the Dri've Upgrade and the Console Upgrade could (at $80/$80 vs. $5).
    Great.
    So what I want to know is this:? what chipset or connection is Creative putting in the Dri've Upgrade and Console Upgrade? It seems to me that the card should be doing the decoding, not the type of optical port. If it's getting the signal, then what is the problem? Is is that the flexijack cannot output/input 5. at all, only stereo?
    Anyway, the Digital I/O dongle is going back, the thing is useless for my purposes. While I can hear 360 games fine, DVD's on it default to 5. if they have that type of audio, and there is no way to switch it to stereo; it gives me only silence then.
    And mods, nothing in my frustration is with you; you seem to be very helpful and responsi've. I just wish the rest of the company would get on the ball.

  • Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

    Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

    Hi Ginger611, 
    Welcome to the Apple Support Community!
    It sounds like you are trying to mirror your iPad to your TV using an Apple TV but don’t see the mirroring option. Please use the attached article for information on setting up AirPlay Mirroring. 
    iOS: Use AirPlay Mirroring
    Cheers,
    Joe

  • Since I loaded Firefox 4.0 I cannot see some of my content on My MSN and Wall Street Journal pages

    Since I loaded Firefox 4.0 I cannot see some of my content on My MSN and Wall Street Journal.
    It' blocking some of my content. Please help.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • I have the Droid Razr Maxx HD and I cannot send multimedia messages while connected to WiFi.

    I have a mobile data "signal," but need to disconnect from WiFi whenever I want to send a multimedia message, including a group message. I can receive multimedia messages while connected to WiFi, sending them is the only issue. Is this a common issue? And is there a fix for it?
    It's very inconvenient as my phone is almost always connected to WiFi and I often use group messages for work.

    Don't believe someone who tells you that you have to turn off WiFi - I FINALLY got someone who knew what they were doing at VZW - and she had me do the following - and VOILA - it worked!  This is a known issue and level 2 support has access to many similar cases
    Call VZW Tech support and tell them you want them to do the following:
    1. You turn off your phone
    2. They "Refresh the network on the voice and text side"
    3. They "Sync network with billing"
    4. You turn your phone back on
    This solved my problem......

  • My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!!

    My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!! Update unsuccessful, current software version is 5.1 (5201) . I've rented a movie recently and does not appear in my movie list, but I have been charged for this movie, can someone help me out with these issues.

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.
    If when you choose restore you get a message that the device cannot be found, download the file below
    Apple TV Software Restore 5.1.1 (2nd generation)
    Apple TV Software Restore 5.1.1 (3rd generation)
    Then hold down the option key while choosing restore and select the downloaded file when prompted.

  • Trying to download update to CoPilot Live and CoPilot GPS with maps.  files sizes are large and taking hours to download on wireless connection.  How can I download App updates and new maps while connected to PC and Itunes through hard wire internet link?

    Trying to download update to CoPilot Live and CoPilot GPS with maps.  Files sizes are large and taking hours to download on wireless connection.  How can I download updates and new maps while connected to PC and Itunes through hard wire internet link?

    I'm on my iPad, so I don't know if this is the page with an actual download. I don't see a button, but assume that is because I  am on an iPad. It is in the DL section of Apple downloads.
    http://support.apple.com/kb/DL1708

  • Can not find air printer - using epson wf 3520 connected via wifi

    Hardware: macbook air
    Software: Osx 10.9.5
    Epson printer wf3520 connected via wifi is working - latest printer software installed
    -when trying to add an air printer sometimes its showing up under bonjour - usually its not showing as available printer
    -when it is installed and I try to print I get the message "printer not connected"
    Any help how to install it correctly?

    Hi wolfgangfromhildesheim,
    If you've gone through the article that Allen provided, have gotten through to the step where you reset your printing system, and the issue persists, then the next step in the article is for you to contact the printer manufacturer for further assistance.
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    About AirPrint - Apple Support
    Take care,
    Alex H.

  • I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network.  The connection was interrupted and the time was over 24 hours.  Is there a better way to do this?  I'm using Migration assistant.

    I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network.  The connection was interrupted and the time was over 24 hours.  Is there a better way to do this?  I'm using Migration assistant.  The lack of an ethernet port on MacBook air does not help.

    William ..
    Alternative data transfer methods suggested here > OS X: How to migrate data from another Mac using Mavericks

  • HT5219 Which keys to I need to switch my macbook air display to an external thunderbolt display connected via mini port?

    Which keys to I need to switch my macbook air display to an external thunderbolt display connected via mini port?

    Which keys to I need to switch my macbook air display to an external thunderbolt display connected via mini port?
    If you just bought the external Thunderbolt Display, you may be able to return it for the LED Display.

  • Can't see printer or shares when connected via Internet Sharing

    I recently switched from a 2006 to a 2008 Mac Pro. Rather than do a migration I simply took the hard drives from the old machine and put them in the new one.
    I then upgraded to Mountain Lion.
    I use Internet Sharing to share my Mac Pro's Ethernet connection via wifi, but the other Macs can't see the Mac Pro's printer or shares when connected in this way. They can access the internet. If I connect a machine via the LAN rather than Internet Sharing, the shares and printer are visible.
    This worked fine on Lion on the old machine. Any ideas?

    Seems that the issue is something to do with connecting via WPA2. When I set Internet Sharing to use WEP (by option-clicking the security menu), I'm then able to see the network shares and the printer.

  • I changed to ipad air 2 and am unable to download books from overdrive. I am connected to wifi and have tried every option on the overdrive site. It closes everytime I try to download a file.

    I changed to ipad air 2 and am unable to download books from overdrive. I am connected to wifi and have tried every option on the overdrive site. It closes everytime I try to download a file.

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, restart your internet modem and router then try downloading books.

  • TS1398 I cannot connect to iTunes store but all other devices are connecting to wifi and working great in household???

    I cannot connect to iTunes store but all other devices are connecting to wifi and working great in household???

    It has been saying this message for weeks so I don't think it's that iTunes is down...thank you though! I have 3 iPads, I phone, and iPod that I cannot connect to iTunes on and am beyond frustrated -ready to return items at this point...

Maybe you are looking for

  • Mac keeps rebooting after upgrading to Mavericks from Snow Leopard

    Hi, I have upgraded my Mac to Mavericks (Mid 2010) from Snow Leopard and my Mac keeps restarting itself, not sure what the cause is, can any help? Thanks

  • Comment on JRE Size

    http://forums.java.net/jive/thread.jspa?threadID=959&tstart=0 There is a thread on java.net on jre size, if you want to comment. .V

  • Digest Authentication with OC4J standalone

    Hi, I am using oc4j 9.0.3 standalone web container . I used axis application as soap engine for deploying a web service in the oc4j . I want to implement HTTP digest authentication for my webservice. I am forced to use the same verison of OC4J due to

  • I need pages 09 to open old files on my new iMac

    I have a new iMac and cannot open old Pages files that were transferred to it. I have Pages 08, but need Pages 09. Any ideas?

  • No destination on FedEx page?

    On my FedEx tracking page, under destination there is nothing. It is estimated for Tuesday, and is still in Memphis. Does anyone have their destination up?