MB Air SSD: My Data Will Need To Go On A Diet

I just returned from the Walnut Creek, CA, Apple Store where there were no MB Air's in stock. However, they had one MB Air 1.8, 64MB SSD on display. I got to play with it....
I shut the MB Air off and booted it from a cold start and timed it till the Apple Desktop appeared and was ready to function. I did this twice and both times, I measured 39 seconds.
Also, I tried loading both GargeBand and iMove separately seeing how long it takes with the SSD. About as fast the loading on my MacPro tower....which is only 4 months old and have 4MB of memory.
Also, looking at the HD, once it is formated there is about 55.5 MB left for use. With OS X 10.5.1 and the iLife programs, approximately 38.5 MB is left for use.
If I were to purchase this configuration, I'd have to spend a fair amount of time putting my Home Folder on a diet....could be a show stopper for me. Also, being a 17" MacBook Pro user, I would miss the screen resolution.
All in all, an interesting way to spend the morning.

You don't have the cloud icon next to the film's cover art on the popup (not via the 'share' icon top right) ?
e.g.

Similar Messages

I have a macbook air bought in 2010 wit liquid damage that might has affected the SSD card. I need to get my data but apple won't help. Authorized dealers never seem to have the same model to try whether the SSD card works. How can I get my data quickly?

Hi
I have a macbook air bought in 2010. It has liquid damage that might or might not affected the SSD card. I need the data on my SSD card for work and I need it urgently. Apparently Apple won't get the data out, even if I have apple care... Licensed apple dealers need to have the same macbook air model so they can insert the SSD card and check whether the data is there, and they never seem to have one...
I'm really disappointed with apple. It's been two weeks and I haven't been able to find out whether the SSD card is holding my data. It can't take that long to do it in store... How can they sell a product and then wash their hands on the matter?
Anyway, enough with the apple rant. I need to get this data urgently so I need to find out how I can get it out of the card. The SSD card and data might be fine so I don't want to take it to a data recovery centre and get charged loads.
Thanks for your help.
Olatz

See this link for a 4870 card, best instructs for flashing for a noob like me. (last lowest price was $150 for a 1GB vRAM 4870 from TigerDirect).
http://web.me.com/jacobcroft/4870Flash/4870Flash.html
However, not every 4870 card will work with the ROM currently floating around out there. BEWARE!
Link to recovering a bricked card:
http://forums.techpowerup.com/showthread.php?t=64328

If my SSD on my Air is almost full, will it slow down the computer?

If my SSD on my Air is almost full, will it slow down the computer? As in, if I have about 20GB left on my SSD, will the computer run slower?

Rule of thumb tends to be that you should set aside 10% of disk space for SSDs for the best speed. This comes from SSDs in Windows PCs, where the SSDs do perform more slowly when full rather than having some free space. This is just how SSDs work, which I won't get into the technicalities of. The SSD controllers themselves allocate set a reserve space (this could not be true in Apple's case, depending on what chips they use), but generally the more free space the better. So 64GB should set aside 6GB, 128GB should set aside 12GB, and 256GB should set aside 25-26GB.
SSDs technically will never be as fast as when you first got it. They slow down as soon as you start to write data to them, but the slowdown will be negligible. It's still faster than a HDD at the end of the day.

Will a macbook air be enough for my needs?

Hello everyone,
I'm looking to get a new mac, and I am in a bit of a dilemma between the MBA and the MBP (non retina).
First of all, let me explain that the reasons for not getting the retina are basically that I feel a bit uncomfortable/scared because of all the "ghosting problems" that one comes across almost everywhere on the web. Even though I know AppleCare could take care of it, etc, I just don't have the time in my daily workload to 1) go somewhere to get help, and 2) be a few days/weeks without a computer.
My current and near future needs are:
1. Development tools
     1a. I will run different development tools/IDEs (not at the same time, of course), like Netbeans, PyCharm, Eclipse, etc. Even Visual Studio 2012 on a           VM/Parallels.
     1b. Compiling time is an issue
     1c. Git(hub)
2. Document/File editing
     2a. For this I'd need something for LaTex, and then Pages, MacVim, TextMate, etc.
3. Web development (no graphics)
     3a. I run a wiki for college which is located in a remote server, a personal web page, and a forum.
4. Browsing/Info, Mail, Newsgroups, Skype, etc
     4a. Typical web browsing for information (no facebook, no twitter, etc), RSS feeds, etc.
     4b. I haven't gotten used to "Mail", so I use Thunderbird for mail and newsgroups
     4c. I need to run Skype
5. Virtualization
     5a. I will run either a VM or Parallels for a virtual windows and a virtual linux machine to test out stuff and use programs which are
          required for the university. I will most probably not have them both running at the same time, but I can never be sure.
6. VPN
     6a. I will need to use a secure remote connection to the university.
7. SFTP, SSH, etc
     To connect to remote servers in the university.
8. Long hours of staring into the screen
9. Portability.
     9a. I don't mind dragging weight with me, but only if I really need it. Sometimes I have to get up and go to another classroom, or just take a break to get a      coffee, etc, and I need to bring my laptop with me since I can't leave it around unattended.
10. Battery life
     Although I will always try to plug in, this will not always be possible and in such cases I need to rely on my laptop to not let me down in times of need.
I don't do any video/music/foto editing. I'm an engineering major specializing in embedded systems but also need to take classes in databases, Java/C# development, etc. I know most IDEs are bloated, and so it is important that I get enough power to run at least one of them at a given time without experiencing lag or crashes.
I've worked on 12,5", 13,3" and 15" screens and I am able to cope with all of those. I have a cheap 22" monitor in the dorm where I can just plug in my computer when I'm home, but needless to say I am barely home...
I know the MBAs have recently gotten a very good upgrade, and are very well built, whereas the MBPs have a CD/DVD drive which I don't need and still use a slightly oldier technolgy. Also, one of my concerns is about the possible "breakability" of the MBA. I don't know how strong it is, but I need to feel comfortable enough to have it in my backpack while taking the bus/train/subway full of people and not being afraid that it'll break because I forgot to put the back between my legs or something like it. With the pro, I'd be pretty conscious of it because of the weight, and also, the big and thick laptop won't just "break" ;-)
I'd love to get some input/ideas on this to try and make the wisest decision possible.
Thanks for your time.

mguasch wrote:
Also, one of my concerns is about the possible "breakability" of the MBA.
Here's a lightweight, squishy "memory foam" sleeve for MacBook Air 13":
http://www.be-ez.com/en/la-robe-air-black-addict.html
...If you're still in Austria, you can get it HERE.

HT1386 I have a new computer and need to sync my iPod touch. I get a message that says "All existing apps and data will be replaced." Does this mean progress in the games will be lost?

I have a new computer and need to sync my iPod touch. I get a message telling me that all existing apps and their data will be replaced with apps from this iTunes library. Does that mean I lose all game progress?

XansMamaw wrote:
... Does that mean I lose all game progress?
Yes.
What you need to do is Transfer the iTunes Library from your Old computer to your New computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.

I need to rebuld the "C" drive on my computer will need to reinstall adobe cs6 when I am done, but have moved recently and lost the data to get that done. Help!

I need to rebuld the "C" drive on my computer will need to reinstall adobe cs6 when I am done, but have moved recently and lost the data to get that done! Help!

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

I have bought an I pad Air 128 with cellular connection.I travel a lot and will need to insert various cellular providers sim cards in the countries i visit. Will these various sim cards work in the I pad Air or is the i pad locked?

I have bought an I pad Air 128 with cellular connection.I travel a lot and will need to insert various cellular providers sim cards in the countries i visit. Will these various sim cards work in the I pad Air or is the i pad locked?

Hello, no ice.
Thank you for visiting Apple Support Communities.
As long as you purchase the GSM model and acquire a Nano-SIM card, you should be able to use your iPad abroad. Here is some information about this process that you may find helpful.
iPhone and iPad: Using cellular networks while in another country
http://support.apple.com/kb/ht1807
Cheers,
Jason H.

My Macbook Air SSD memory is getting low , if i delete the apps on iTunes, will this apps be deleted on my iPhones and iPads as well ?

My Macbook Air SSD memory is getting low , if i delete the apps on iTunes, will this apps be deleted on my iPhones and iPads as well ?

If necessary,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to access Mac Book Air SSD externally?

I have made a mistake using my Air, I deleted the boot record on the SSD.
The laptop is unable to start, unable to run diagnorstics, unable to run boot select, nothing, it just shows the gray background with no apple logo on it, so does not even loads the OSX. I believe it stuck in the boot process when there are two OS (OSX, SUSE) and no boot records. The system detects external USB flash drive, but it can't boot from that either.
My questions are theese:
In order to repair and reflash the SSD from an older backup image that I have, I need an external SSD reader, which I can connect to another computer. Where can I finde such? I have been looking for it the whole day, but no reader has the same connection that apple does.
If there is no reader to that, I can make it. Correct me if I am wrong, but the Air's SSD is a SATA, but a smaller one. Are the pinouts in the same order as in SATA? Because in this case, I just need 2 connectors and a bunch of wire...
It would be much easier to do this process without a home-made sata reader, so I have an another idea, a riskier one: The problem is with the SSD, so why not remove it, and start a linux from an USB stick, then when the system is up, put back the SSD, and reformat it. Is it technically possible? Will the system recognise that the SSD was put back? Will it damage the mainboard?
So, theese are my ideas to reflash the SSD, I hope I can make it without buying a new one. If someone has better ideas I am looking forward to it too...
Thanks for every reply!

if its a 2011 model then it gotta still be under warranty. why not at least try to ask the apple store to take care of you? if its a 2011 model like you say it is then it won't do any good to take the computer apart.
ive tried linux before on a pc (i think it was the backtrack linux) and by default it put lilo on my main hard disk boot sector and it screwed it and not the sd card that i told linux to install it to. lame
your not thinking hard enough. its realitively easily to erase the hard disk, install snow leopard and then instal lion from someones CD. the external drive only costs $79 why are you rushing into wanting to take the computer apart and replace its ssd module (at a cost of around 249 to 289) to fix yourself? without trying everything else?
maybe you didnt make the usb boot disk properly. usb drives do not use boot sectors. technically usb drives have built in firmware to look for system files and then to boot.. you can't physically write a track 0 to a usb drive in real life. if you were actually able to you would ruin the drive.
from your description you make it sound like its some kind of nvram failure or worse (like a total firmware failure)
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models.

Update firmware SSD A-Data 537639-001

I have HP SSD A-Data 537639-001. And this ssd set in loader mode - disk have name JM Loader 001 ATA Device. And have capasity 4Gb, but original have 32Gb. I think need to update firmware. But where this firmware take?

Never really wanted to crack open the Mac Pro, but the original Radeon wasn't upto the job of running X-Plane or Digital Combat Simulator (DCS) in Boot Camp. The Pro is supposed to be my software development system. If I could be rid of Windows, I would. DCS is Windows only so I will have to knock together a PC.
A bit off topic... I also 'fly' X-Plane. A friend and I have built a flight simulator that works with X-Plane. A couple of concept drawings attached. Instead of hydralics we used pneumatic rams and quiet compressors. The simulator works very well and is great fun to fly. I am now writing the software to get the simulator to work with DCS.
Back on topic... Hopefully Apple will release a Mac Pro with SATA3, Thunderbolt, USB3, the ability to have multiple GPUs and use tech like SLI and PCIe 3. The Pro deserves a good overhaul.
In the meantime the Sonnet kit looks cool. I am liking the idea of a MacBook Air + Sonnet Echo + GTX670. If that would work(?)

I have a hdd from late 2009 that I upgraded from leopard to snow leopard to lion to mountain lion. I want to upgrade the hdd to ssd. Do I need to buy a new copy of mountain lion to install on the ssd? If not, then what is the procedure to transfer?

I have a hdd from a late 2009 mbp. I upgraded from leopard to snow leopard to lion to mountain lion. Now I want to upgrade to a ssd. Do I need to purchase a new copy of mountain lion to go on my new ssd? If I don't, then what is the procedure to transfer mountain lion with my 4 user accounts onto the new ssd from the hdd?
I'm confused on if I can use the recovery hd on a thumb drive to install mountain lion on my ssd. Will it be pheasible with so many OS X upgrades? And then how do I get my user accounts onto the ssd from the hdd. Do I use migration assistant? Do I need to make a time machine backup first? Should I use something called Carbon Clone or something like that?
Thanks for reading

If you have a cable that connects and external HDD to the MBP, it will do. If it is something like this, an enclosure will not be needed for the swap:
An enclosure allows you to use your old HDD for storage or backup purposes. The cable will not.
Here are instructions as to how the swap can be performed using DISK UTITY. Substitute You cable for the enclosure in same:
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
If there is any confusion on your part, post back.
Ciao.

Disk Utility - Partition map needs repair because a data partition needs loader space.

I just finished setting up both my OSX and Windows installs from scratch after fitting an SSD, which in-turn was right before my logic board died and Apple replaced it, now it looks like I have some sort of hard drive issue brewing.
This was my plan for the SSD, and how it currently displays in Disk Utility although that wasn't the case earlier:
And in Terminal:
My intention was to have two boot partitions for each OS, 'Macintosh HD' and 'Win 7 Pro' and a third shared data partition 'Projects' on the SSD, which I made in Drive Genius after installing Boot Camp. I don't want Macintosh HD accessible from Windows because I'll be using Paragon HFS+ or MacDrive to give write access and don't want OSs stomping on other OSs turf, hence needing three partitions. Everything looked fine until I just checked Disk Management under windows and realised it couldn't see the Projects volume. Even though it's fine in OS X, it was just marked black/unallocated space.
So I booted back into OSX, all my files look fine so I ran Disk Utility and the Partition tab looked really odd - unfortunately I didn't get a screenshot. All volumes reported their size correctly but visually, Macintosh HD took up most of the drive. I could see 'Windows 7 Pro' under this, but the Partition Layout section had a scrollbar, which if I scrolled down showed 'Projects' squished into a tiny gap at the bottom. I ran a Verify, which reported no problems, and at some time since the Partition Layout has reverted to how it should look (as in the screenshot above), with 'Projects' book-ended by "Macintosh HD' and 'Windows 7 Pro'.
Now when I run a Verify on Macintosh HD or Projects volumes, it says there's no problem, but if I run one on the drive, I get this message:
Volume Macintosh HD on disk0s2 has 0 bytes of trailing loader space and it needs 134217728 bytes
Problems were found with the partition map which might prevent booting
Error: Partition map needs repair because a data partition needs loader space.
I've only managed to find one other mention of this error here, but the fix is not relevant to me because I don't have Sophos installed. I've tried Single User/Safe Mode but it just boots into normal mode, so I can't do a fsck -fy.
** /dev/rdisk0s2 (NO WRITE)
Can't open /dev/rdisk0s2: Permission denied
That value in bytes is exactly 128mb, so I suspect the problem lies with one of the invisible partitions that show up in iPartition and Disk Management under Windows, but not in Disk Utility. I have backups and I suspect the root of the problem is partitioning in iPartition after installing Boot Camp, but I've never had issues with this approach in the past so I'm wary of just giving up and reinstalling Windows again will be massive hassle because I no longer have a SuperDrive and last time it refused to install from USB.
Anyone have any idea what's going on? It seems like the sort of issue Disk Utility should just handle, at least in Recovery mode, but it's not playing ball. It also doesn't seem like a massive problem since my files all look fine and performance is OK, so I'm reluctant to do anything major.
I'll update with a shot of the drive in Disk Management from Windows in a few minutes, in case that sheds light on anything. Thanks!

Similar issue here. I manually partitioned my hard disk for triple boot (using Gparted on Linux), then everything was just fine until I ran bootcamp, to do something as simple as create a boot USB.
I get the same error as a result and have to work my way into booting, by resorting first to a Linux live USB, then restarting from the live USB, to finally reach my rEFInd boot manager, or whichever boot manager should be initialized at startup.
I suppose that the cause in my case is that some operation "scratched" the protective MBR. See this:
http://www.mactech.com/articles/mactech/Vol.23/23.03/APMtoGPT/index.html
I am hoping to fix it using an external Yosemite installation media: see this guide -
http://www.macworld.com/article/2367748/how-to-make-a-bootable-os-x-10-10-yosemi te-install-drive.html
And as a last resort to reinstall.
I'll admit I am negatively surprised. I need this computer for professional reasons, and for the sake of "preserving the integrity of OSX", measures defined by Apple instead tend to make partitions far easier to damage. And this problem seems to affect a number of users.
As for what I have to go through to fix it: a 5GB download, during which I have to register my credit card to the Apple Store. "Pay first, get your free software next."
IF Disk Utility can fix it, from the external media, then fair enough. The hassle is unpleasant but it files as "a choice".
Otherwise you can file it safely under software design calamity.

How to know which master data objects need to activated in R3

SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT               Account assignment group for this customer
0ACCNT_GRP_TEXT                Customer account group
0BILBLK_DL_TEXT                Locked
0BILBLK_ITM_TEXT               Billing block for item
0BILL_BLOCK_TEXT               Billing block in SD document
0BILL_CAT_TEXT                 Billing Category
0BILL_RELEV_TEXT               Relevant for Billing
0BILL_RULE_TEXT                Billing rule
0BILL_TYPE_TEXT                Billing Type
0CONSUMER_ATTR                 Consumer
0CONSUMER_LKLS_HIER            Consumer
0CONSUMER_TEXT                 Consumer
0CUST_CLASS_TEXT               Customer Classification
0CUST_GROUP_TEXT               Customer Group
0CUST_GRP1_TEXT                Customer Group 1
0CUST_GRP2_TEXT                Customer Group 2
0CUST_GRP3_TEXT                Customer Group 3
0CUST_GRP4_TEXT                Customer Group 4
0CUST_GRP5_TEXT                Customer Group 5
0DEALTYPE_TEXT                 Sales Deal Type
0DEL_BLOCK_TEXT                Delivery block (document header)
0DEL_TYPE_TEXT                 Delivery Type
0DISTR_CHAN_TEXT               Distribution Channel
0DIVISION_TEXT                 Division
0DLV_BLOCK_TEXT                Schedule line blocked for delivery
0DOC_CATEG_TEXT                SD Document Category
0DOC_TYPE_TEXT                 Sales Document Type
0INCOTERMS_TEXT                Incoterms (Part 1)
0INDUSTRY_TEXT                 Industry keys
0IND_CODE_3_TEXT               Industry code 3
0IND_CODE_4_TEXT               Industry code 4
0IND_CODE_5_TEXT               Industry code 5
0IND_CODE_TEXT                 Industry code
0ITEM_CATEG_TEXT               Sales document item category
0ITM_TYPE_TEXT                 FS item type
0KHERK_TEXT                    Condition Origin
0MATL_GRP_1_TEXT               Material Group1
0MATL_GRP_2_TEXT               Material Group 2
0MATL_GRP_3_TEXT               Material Group 3
0MATL_GRP_4_TEXT               Material Group 4
0MATL_GRP_5_TEXT               Material Group 5
0MATL_TYPE_TEXT                Material Type
0MAT_STGRP_TEXT                Material statistics group
0NIELSEN_ID_TEXT               Nielsen ID
0ORD_REASON_TEXT               Order reason (reason for the business transaction)
0PICK_INDC_TEXT                Indicator for picking control
0PRODCAT_TEXT                  Product Catalog Number
0PROD_HIER_TEXT                Product Hierarchy
0PROMOTION_ATTR                Promotion
0PROMOTION_TEXT                Promotion
0PROMOTYPE_TEXT                Promotion Type
0PROV_GROUP_TEXT               Commission Group
0REASON_REJ_TEXT               Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT               Volume rebate group
0RECIPCNTRY_TEXT               Destination country
0ROUTE_TEXT                          Route
0SALESDEAL_ATTR                Sales deal
0SALESDEAL_TEXT                Sales deal
0SALESORG_ATTR                 Sales organization
0SALESORG_TEXT                 Sales Organization
0SALES_DIST_TEXT               Sales district
0SALES_GRP_TEXT                Sales Group
0SALES_OFF_TEXT                Sales Office
0SCHD_CATEG_TEXT               Schedule line category
0SHIP_POINT_TEXT               Shipping point/receiving point
In BW
Base Unit of Measure     0BASE_UOM
Bill-to party                    0BILLTOPRTY
Calendar Day                  0CALDAY
Calendar Year/Month      0CALMONTH
Calendar Year/Week      0CALWEEK
Change Run ID              0CHNGID
Company code              0COMP_CODE
Cost in statistics currency          0COST_VAL_S
Credit/debit posting (C/D)            0DEB_CRED
Distribution Channel       0DISTR_CHAN
Division                                     0DIVISION
Number of documents    0DOCUMENTS
Sales Document Category          0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items         0DOC_ITEMS
Fiscal year / period
Fiscal year variant                      0FISCVARNT
Gross weight in kilograms           0GR_WT_KG
Number of Employees    0HDCNT_LAST
Material                                     0MATERIAL
Net value in statistics currency    0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer                            0PAYER
Plant                             0PLANT
Quantity in base units of measure 0QUANT_B
Record type                   0RECORDTP
Request ID                    0REQUID
Sales Employee            0SALESEMPLY
Sales Organization         0SALESORG
Sales group                   0SALES_GRP
Sales Office                   0SALES_OFF
Shipping point                0SHIP_POINT
Ship-To Party                0SHIP_TO
Sold-to party                  0SOLD_TO
Statistics Currency                    0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
   Bhima.
Message was edited by: Bhima Chandra Sekhar Guntla

Hi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P

My iphone is synced and backed up with another computer which is now broken... and i have synced it with a new one but when i want to do anything itunes says all data will be erased and replaced with the current itunes library?what do i do?

my iphone is synced and backed up with another computer which is now broken...i have synced it with my new computer but it hasnt transfered anything over to itunes and when i try to add anything to my iphone it says all data will be erased and replaced with the current itunes? i dont want to lose all my apps and music.... i dont know how to go around this problem? i want to back it all up and sync it properly to my new computer so that is now my main computer , so i can add ring tones and music etc with out it erasing everything ive got. any answers would be great and muchly appreciated. thanks, im not sure what operating system my iphone has either.....

It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy of your computer to put everything on the new one.
It sounds like you have failed to do this, which is not good at all.
You will have to transfer your itunes purchases from your iphone. Authorize your computer for your itunes account
About iTunes Store authorization and deauthorization
Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars. So do NOT sync yet. This is why a backup copy is so important.
Enter one unique contact and calendar entry on your computer.
When you first sync, you should get the option to merger the data. Choose it.
If you want your pics, then you will need to e-mail them to yourself before you sync. They will not be of the original quality as they are reduced when synced to iphone.
When all is as goos as it can be, then backup your computer, and always maintain the backup.

I can not sync my ipod with my itunes library unless i do a restore. When I begin the restore, I'm told that all my data will be erased. Will I be able to backup my data first, then, after the restore, can I reload my old data?

If I restore my ipod, will it prompt me to backup my existing data? When I begin the restore process, it tells me that all data will be erased. I'm trying to download my library to a different ipod.

It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy of your computer to put everything on the new one.
It sounds like you have failed to do this, which is not good at all.
You will have to transfer your itunes purchases from your iphone. Authorize your computer for your itunes account
About iTunes Store authorization and deauthorization
Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars. So do NOT sync yet. This is why a backup copy is so important.
Enter one unique contact and calendar entry on your computer.
When you first sync, you should get the option to merger the data. Choose it.
If you want your pics, then you will need to e-mail them to yourself before you sync. They will not be of the original quality as they are reduced when synced to iphone.
When all is as goos as it can be, then backup your computer, and always maintain the backup.

MB Air SSD: My Data Will Need To Go On A Diet

Similar Messages

Maybe you are looking for