MB Dead now after flashing, please help!@

Writing this on my old p1.
I just flashed my Neo 2 865PE to 1.4 and now it wont boot!
On my bracket on the back the top right one is red rest are green..
What now? Am I screwed? Nothing but problems with this MSI board I tell you....
Please help!

Get 1.3 from the website if that's what your board came with originally. If it's not, get the one that came with your board. The reason I say that is that is, at least for me, the flashing program says there is a Bootblock Mismatch with all other bios' except what came with my motherboard. ?(
Make that backup disk and remane that bios file for your board to AMIBOOT.ROM. and have it in.
Unplug your power. Take out your RAM. Clear the Cmos via the jumper, I believe it's JBAT1. Put your RAM back in. Then power up. Maybe have someone turn on the power while you hold down the Ctrl + Home Key. You really have to be fast. When you get your floppy, the board will read from it and restore your bios - then beep 4 times. It will then reboot. If you're lucky, all will be ok and you can go in and reset your settings in the Cmos.
I want to make this suggestion to anyone who flashes their bios': Have that backup disk in while you flash. If the flash goes bad, when you hit the reset button, immediately the boot block will hunt for that AMIBOOT.ROM file. If you shut down your power with the power button, your system won't power back up. You will swear it's dead. You won't get it back until you unplug your power cord, clear your cmos, reset your RAM, power back on and IMMEDIATELY hold down the Ctrl + Home Key. I really don't know what is going wrong with these bios releases, but for some boards, they appear to kill the board. I'm convinced that I will never be able to use any other bios but 1.3. There is a glitch in the chip evidently. With the bios that came programmed on the chip, you can, seemingly, get your board back. At least, that's been true for me.
Just keep trying. I believe you can get your board back. The boards are really nice but really finicky.
Mark

Similar Messages

Satellite A500-1DN (PSAR3E) - Dead BIOS after flashing

Hi all.
At first, sorry for my english.
My problem is simple I have a dead bios after flashing from toshiba service station (or something like that).
How does it happened? :4 days ago it was asking me for update. It was for me totaly normal because it is asking for some updates every day. I enablished that update and after some cliks on button next I noticed that it was BIOS update and it was nearly at half. I wanted to wait to end (because i know if I stop bios uptade I end up with dead bios(corrupted bios)) but it stoped nearly at end and it showed me some errors. After that my laptop made a restart and i could not stop it. It turned off.
Now if i push power button i get black screen (like it is turned off) som leds lights and Cpu fan at 10% maybe.
What i did 3 last days? : I searched all the interned about what to do with it. I tried maybe 10 types off crisdisks with usb and CD(with floppy not becose Bios for my laptop is too big for 1 floopy).
I tried to boot with FN+B it worked for me CD drive started to search for CD, USB drive showed activity but to dead end happened nothing. I tried to make Boot usb with newer minidos.sys and phlash16.exe. I tried to combinate it but still nothing.
I tried all what i found on forums everywhere on internet. nothing helped.
Another thing is that only one bios i found was 1.90. If somebody has a older bios for my laptop pls give me link. I am losing hope becose i cant find anithing on google.
I am a advenced user I did nearly everithing with pc but i never worked with dead bios.
Pls help me somebody and give me a correct crisdisk for my model. Or different sugestion.

hi,
sorry, mate but you should contact the Asp http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/
Unfortunately, the warranty doesn't cover bios failure and you will have to pay about 50-60 Us dollars (Anyway, it costs like this in my service center)

HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

My Iphone4 is **** slow after IOS7 please help

My Iphone4 is **** slow after IOS7 please help

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable. iOS 8 seem to make the iPod more sensitive to marginal cables.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I flashed the BIOS on my dv4 2045dx with the F17 BIOS, NOW Black screen, PLEASE HELP

I flashed the BIOS on my dv4 2045dx with the F17 BIOS, NOW Black screen. Now even when pressing the windows and the B key when powering, the screen stay black. Lights, fan, HD, USB drive with HP_TOOLS partition and bios backup flashes goes on for some time with some beeping every 15 sec.
I try to plug it on to a external monitor without luck.
What's next? Can I reload a BIOS from a CD? Anyone have an idea?
Thanks

Hello KenyaKitten
I understand after flashing your bios the PC will not boot. I will do all I can to help with this issue.
First thing let’s do a hard reset, remove all devices from the PC including battery and power cable. Once all is removed press and hold power button for 15-20 seconds. Once that is done insert only battery and charging cable. Try to boot now, if getting same response move to next line below.
Next, I want you to try is to boot into the bios menu. Turn the PC off and as you turn it on tap the F10 key repeatedly. Hopefully this boots you into the bios menu. Screen will look a little bluish grey and have setup utility across the top.
Also if the PC starts beeping at you while you’re tapping you can stop. Now if you reach that screen you may get a box that say save changes and exit choose no. (Note your mouse doesn't work on this screen so you would need to use the arrow keys)
After that press F9 another box will up come about reset defaults, accept that. Then press F10 to save and exit. The notebook will attempt to boot.
Also please inform me if you notice the number lock or caps lock keys blinking off and on. Also please let me know if the PC beeps at you while tapping F10 regardless if the bios comes up or not.
Please respond at your earliest convenience when you get further information.
Thank you.
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

AT A DEAD END WITH FP please help!

This is really a long story that I have been battling for 8 months or longer and now think I have made a bigger mess than before.....It started all in facebook when I was having problems playing one game Cafe World......everything was fine and and then it started saying plug in shockwave unresponsive....I want to say all this start not long after I done some long over due windows updates.....I have uninstalled all adobe's and tried to start over.....also removed google chrome and FF to the beginning......reinstalled the flash player and chrome and everything was ok but freezing and running very slow then it asked to install a plugin i did and then the shockwave unresponsive started again. I only have the problem in that game on facebook.....at this time tho I feel I have made a bigger mess and I really need a starting point to start over......can someone please help me get this problem resolved....I have read and read for a solution so that not to be a bother but this is crazy!!!! I enjoy Chrome but I will remove it again if need be.
OS Windows xp IE8 service pack 3
not sure what all is needed...please just let me know I will find it
I am not highly educated on computers.
Thanks,
Dawn

Hi dd, I'm surprised you didn't ask for help from here much sooner. I could not deal with that for 8 months:-)
Let's take a look and see where you are today. Go to C:\Windows\System32\Macromed\Flash Right click on the Flash folder and post back all files listed there. The files NPSWF, you will need to right click on each one and then click Properties to obtain the version numbers. Post all of that back as I need the info.
Then Using IE, go to Tools, Manage add ons(all add ons) and you should find this listed among the add ons:
Shockwave Flash Object...ActiveX Control...Flash10e.ocx (vs 10.0.45.2) and be Enabled.
Using FF find the plug-in SWF vs 10.0.45.2 and it must be Enabled.
Thanks,
eidnolb

Another person who has a problem with Flash - Please Help!!

I have a Dell Dimension 4700 Intel (R) Pentium (R) - 4 CPU 2.80 GHz 2.79 GHz 504 MB of RAM
For a few years now I would have to restore the computer to an earlier time after an update was done in order to view youtube, etc. It seemed that when my computer did an automatic update it would mess up the flash player.
My husband just recently did another update and now the flash isn't working and the computer won't restore anymore.
I keep getting the following messages: adobe flash player active x set up failed to install 19166
program error: failed to register status installation complete
I have uninstalled and installed the flash several times
everytime i go to install flash it says: Adobe Flash Player 10: This application has been downloaded before. Reload?
Then I get: Your security settings do not allow websites to use ActiveX controls installed on your computer.
I don't want to take this somewhere because I have a feeling that will just wipe the computer clean and I have a feeling it is something stupid that I'm not doing.
Please Help.

OK...Check, check...did all that. I am cutting and pasting a segment from the flash troubleshooting page because its exactly what is happening to me. There were no responses to help this person.
"I've tried installing flash player 9 but am not able to do so. It will begin installing but when it gets to 'items remaining: 4' the progress bar continues to move and underneath says searching but nothing happens. I tried leaving it on all night but same thing when I came back in the morning. When I close the installer it then says 'stopping now may result in an incomplete set of software' Also, when I tried uninstalling previous versions, the uninstaller does nothing. It says 'items uninstalled: 0' and 'processing', but same thing, the thing spins but nothing happens. i tried the other steps given to see if that helped but nothing seems to work."
Here is the page...
http://sdc.shockwave.com/cfusion/webforums/forum/messageview.cfm?forumid=44&cati d=184&threadid=1267248&enterthread=y#4577694
I tried some of the suggestions above the last two posts. But it looks like my problem is the same as those.
I even tried to post on there but from what I see it looks like I have to have flash to do it...I get the page with the blue lego brick.
I'm pulling my hair out. I didn't realize how much of the internet ran on flash.

Dead MSI6119 after flashing bios

H/W : MSI 6119 Pnp
PIII 500
S/W : Windows XP
Originally I flash p2.9 onto my MB 6119, but my the PC complain that the OS cannot be found.
I did not know what version I was previously using so I decided to flash in Version s1.2 which is for a std MB.
After which the process completed sucessfully, when I try to reboot, Screen is seen and identify the graphic card sucessfully and sounded a long than usual beep When it tries to identify the CPU, it displays pentium 98 MMX (100 Mhz bus speed) and then it refuses to go on. It also does not seek for the disk A.
But can I do now. Please help me, I am out of idea.
Thanks.

My MB does not have a jumper and Dip switch and also I am not running a coppermine because the PIII 500 is runing at 2.0 V.
Also I am puzzled that this is pentium II/III slot 1 board how come there is recognition for pentium I chip.
But really thank you for your reply. Any other helpful suggestion.
Thank u.

Videos NOR Music will load after SYNC, Please HELP

Hello everyone,
I have an iPad and Recently bought RIO to watch on the iPad.
After it downloaded I could not find it anywhere! So I synced to my iTunes and there it was....after the iPad was done syncing I ejected it....
And NOW the Music folder NOR the iPod apps will open.
In my setting my iPad shows that there is 0 movies and 0 songe.....but when I connect it to my iTunes....it shows all the music and videos are on my iPad!
Someone PLEASE HELP!!!!!!

I just wanted to get the question out ASAP....
So here is the breakdown
My 2 year old wanted to watch something new. So i decided to use my iPad and look for a new movie. He saw the preview of RIO and wanted to watch it.
So i downloaded it and once it was finished I went to my main page and opened the videos icon. All my videos were there, but when I looked for RIO it was not there. I even went to the search page and only angrey birds same up (RIO EDITION).
So i was like DANG....walked downstairs and plugged my iPad inot my computer. I opened iTunes and proceeded to transfer purchases. So RIO transfered over to my iTunes on my PC.
Once it was complete, I clicked the eject button and "tried" to open the videos app.....Nothing happened. It went the videos black background screen for like 7 seconds then it automatically exits and returns to the home screen. I was like...WHAT??
I tried and tried again with no luck.
I walked back to my computer and tried to resync and remove all videos and music over and over and over with no luck!
So at the moment, when i try to open either the video or the ipod apps...they just sit at the background screen for about 7 seconds then shuts down and returns to the home screen.
When i go to my settings in my iPad it says there are NO songs and NO videos on my iPad.
When I plug it into my iTunes, it shows that I have 9gb of free space on my 64gb iPad....1180 songs and like 8 movies and 22 tv shows...mostly kids stuff...
So I hope that helps clarify my problem.
I have had this once before, but it fixed itself, I was at work and a few hours later everything was working!
But NOT this time, its just not wanting to play at all
Thanks again for your HELP!

Serious Issues after update, PLEASE HELP!!!!

Two nights ago i did a software update. Shut the computer down everything was fine. Im not sure the software update worked properly. When i restarted the computer later that evening, all i got was the gray screen with the apple. A friend was searching forums for me over the internet while we were trying to fix it. Did the CTRL OPTION R P thing and that didnt work. Did the CTRL S and that didnt work. Next day went and bought a Snow Leapord cd. After three hours the status bar moved appx 3/4 of an inch. Took it to apple. They wiped the Hardrive clean and reinstalled Snow Leapord to it. Now it restarts and operates. However, it takes about 15 min for it to start up and get to the desktop and it runs TERRIBLY slow. It has a 500g hard drive that was put in 2 weeks ago. It also has 2g of RAM. After taking it to apple it is only showing 1.5G of RAM after the wiped the hard drive. PLEASE HELP ME!!!!!! Everything was working fabulous prior to 2 nights ago.

Well I just rewiped the hardrive clean and reinstalled snow leapord. IT WORKED!!!!!! Computer is running fast as could be, start ups in less than 30 seconds, no lagging. Im really happy as i bought this computer from a good friend and its less than a week since ive had it. I think ill just live with the ram still showing 1.5g. I think ill wait and just go get 2 4g sticks when i get around to it that way It will be as fast as possible and ill be using the ports to their full potential.

I downgrade my hp envy 15 from windows 8 to windows 7 now nothing works please help

I downgraded from windows 8 To windows 7. now nothing want to work.I knew I shouldn't but i like windows 7 more.it logs into Windows 7 but from there i can't do anything it doesn't want to respond to a mouse a usb or a portable dvd rom.and the worst of all I can't access the Internet it seems like the windows 7 has noadapter drivers so i know that i have to install intel drivers but i can't access anything so i don't know how to do this please help
This question was solved.
View Solution.

Hi:
Below is the link to the driver page for your model.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6894...
To get the graphics to work correctly you need to install these drivers in this order and reboot after each installation.
1.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&dlc=en&lc=en...
2.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128860-1&cc=us&dlc=en&lc=en...
3.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127811-1&cc=us&dlc=en&lc=en...
Next, intall the audio driver and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127790-1&cc=us&dlc=en&lc=en...
Ethernet:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&dlc=en&lc=en...
Card reader:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127815-1&cc=us&dlc=en&lc=en...
3D driveguard:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&dlc=en&lc=en...
Webcam:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141615-1&cc=us&dlc=en&lc=en...

I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
[ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
http://sourceforge.net/projects/kernelex/

Sales Api Is not working After Intializing(Please help it's urgent)

Hi all,
When i am executing an sales api to create lead in sql+ it s executing fine,but when i am executing the same api after intializing in SQL+ or in concurrent request,it is troughing an error like
AS_SALES_MEMBER_PVT Using Fn....
Please help Me and also look into the code...
DECLARE
q_sales_lead_id NUMBER (8);
q_sales_lead_line_out_tb VARCHAR2 (300);
q_sales_lead_cnt_out_tbl VARCHAR2 (500);
q_return_status VARCHAR2 (10);
q_msg_count NUMBER (10);
q_msg_data VARCHAR2 (800);
a_return_status VARCHAR2 (10);
a_msg_count NUMBER (10);
a_msg_data VARCHAR2 (800);
q_noteid NUMBER (4);
x_sales_lead_line_out_tbl as_sales_leads_pub.sales_lead_line_out_tbl_type;
x_sales_lead_cnt_out_tbl as_sales_leads_pub.sales_lead_cnt_out_tbl_type;
l_sales_lead_rec as_sales_leads_pub.sales_lead_rec_type;
l_sales_lead_line_tb1 as_sales_leads_pub.sales_lead_line_tbl_type;
v_party_id NUMBER (10);
v_resource_id NUMBER (10);
v_group_id NUMBER (10);
v_person_id NUMBER (10);
v_org_id NUMBER (10);
v_customer_id NUMBER (10);
v_primary_application VARCHAR2 (150);
v_secondary_application VARCHAR2 (150);
v_lead_provider_type VARCHAR2 (150);
v_nomenclature_final VARCHAR2 (150);
v_segment VARCHAR2 (150);
v_nomenclature VARCHAR2 (150);
v_nomenclature_1 VARCHAR2 (150);
v_segment_1 VARCHAR2 (150);
v_fleet_mix VARCHAR2 (150);
v_category_set_id NUMBER (10);
v_category_id NUMBER (10);
e_msg VARCHAR2 (500);
v_party_name VARCHAR2(150);
out_param VARCHAR2(150);
CURSOR c1 IS
SELECT a.*, ROWID
FROM al_vendor_sms_crmlead_in a
WHERE a.msg_flag = 'N' AND a.customer_code IS NOT NULL
AND a.models IS NOT NULL
AND a.fleet_mix IS NOT NULL
AND a.segments IS NOT NULL
AND a.lead_provider IS NOT NULL
AND a.secondary_app IS NOT NULL
AND a.cp_mobile_no IS NOT NULL
AND a.id='L';
BEGIN
For i in c1 LOOP
BEGIN
out_param :='phone validation';
SELECT ppf.party_id
INTO v_party_id
FROM per_phones pp, per_all_people_f ppf
WHERE ppf.person_id = pp.parent_id
AND pp.phone_type = 'M'
AND pp.phone_number = i.cp_mobile_no
and rownum<=1;
out_param:='Resource_invalid';
SELECT jtf.resource_id, jtm.GROUP_ID, jtf.source_business_grp_id,
jtf.source_id
INTO v_resource_id, v_group_id, v_org_id,
v_person_id
FROM apps.jtf_rs_resource_extns jtf, apps.jtf_rs_group_members jtm
WHERE jtf.resource_id = jtm.resource_id
AND jtf.end_date_active IS NULL
AND jtm.delete_flag = 'N'
AND jtf.user_name NOT LIKE 'ALM%'
--AND jtf.attribute5='Sales'
AND jtf.person_party_id = v_party_id
AND ROWNUM <= 1;
out_param:='Party_invalid';
SELECT party_id,party_name
INTO v_customer_id,v_party_name
FROM apps.hz_parties
WHERE status = 'A' AND party_number = i.customer_code;
out_param:='Sec_prim_application_invalid';
SELECT parent_flex_value_low, flex_value
INTO v_primary_application, v_secondary_application
FROM apps.fnd_flex_values_vl
WHERE parent_flex_value_low IN (
SELECT flex_value
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009667
AND enabled_flag = 'Y')
AND enabled_flag = 'Y'
AND TO_NUMBER (TRUNC (SUBSTR (attribute1, 1, 2))) =
i.secondary_app ;
out_param:='Segment_map_invalid';
SELECT Upper(REPLACE (regexp_replace (i.models, '(\s*[[:punct:]])'), ' '))
INTO v_nomenclature
FROM DUAL;
SELECT flex_value
INTO v_nomenclature_final
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009798
AND enabled_flag = 'Y'
AND end_date_active IS NULL
AND REPLACE (regexp_replace (flex_value, '(\s*[[:punct:]])'), ' ') =
v_nomenclature
AND ROWNUM <= 1;
SELECT flex_value
INTO v_segment
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009632
AND enabled_flag = 'Y'
AND end_date_active IS NULL
AND TO_NUMBER (TRUNC (SUBSTR (flex_value, 1, 2))) = i.SEGMENTS;
SELECT ffvh.flex_value, ffv.flex_value
INTO v_nomenclature_1, v_segment_1
FROM apps.fnd_flex_values_vl ffvh, apps.fnd_flex_values_vl ffv
WHERE ffv.flex_value = ffvh.parent_flex_value_low
AND ffvh.enabled_flag = 'Y'
AND ffv.flex_value_set_id = 1009632
AND ffv.enabled_flag = 'Y'
AND ffvh.flex_value_set_id = 1009798
AND ffvh.parent_flex_value_low = v_segment
AND ffvh.flex_value = v_nomenclature_final;
out_param:='Lead_provider_invalid';
SELECT flex_value
INTO v_lead_provider_type
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009718
AND end_date_active IS NULL
AND TO_NUMBER (TRUNC (SUBSTR (flex_value, 1, 2))) =
i.lead_provider;
out_param:='vehicle_res_invalid';
SELECT lookup_code
INTO v_fleet_mix
FROM apps.fnd_lookup_values_vl
WHERE lookup_type = 'VEHICLE_RESPONSE_CODE'
AND enabled_flag = 'Y'
AND TO_NUMBER (TRUNC (SUBSTR (description, 1, 2))) = i.fleet_mix;
out_param:='Category_invalid';
SELECT mic.category_set_id, mic.category_id
INTO v_category_set_id, v_category_id
FROM apps.mtl_item_categories mic, apps.mtl_categories_tl mc
WHERE mic.category_id = mc.category_id
AND organization_id = 106
AND description = v_nomenclature_final
AND ROWNUM <= 1;
out_param:='api-Error';
l_sales_lead_rec.customer_id := v_customer_id;
l_sales_lead_rec.status_code := 'NEW';
l_sales_lead_rec.attribute15 := v_segment_1;
l_sales_lead_rec.attribute12:=To_Char( i.expected_closedate,'YYYY/MM/DD HH24:MI:SS');
l_sales_lead_rec.attribute10 := v_lead_provider_type;
l_sales_lead_rec.attribute9 := v_secondary_application;
l_sales_lead_rec.attribute8 := v_primary_application;
l_sales_lead_rec.assign_to_salesforce_id := v_resource_id;
l_sales_lead_rec.assign_sales_group_id := v_group_id;
l_sales_lead_rec.assign_to_person_id := v_person_id;
l_sales_lead_rec.vehicle_response_code := v_fleet_mix;
l_sales_lead_rec.description:=v_party_name||' '||v_nomenclature;
l_sales_lead_line_tb1 (1).category_id := v_category_id;
l_sales_lead_line_tb1 (1).category_set_id := v_category_set_id;
l_sales_lead_line_tb1 (1).organization_id := v_org_id;
l_sales_lead_line_tb1 (1).quantity:=1;
as_sales_leads_pub.create_sales_lead
(p_api_version_number => 2.0,
p_init_msg_list => fnd_api.g_false,
p_commit => fnd_api.g_true,
p_validation_level => fnd_api.g_valid_level_full,
p_check_access_flag => 'Y',
p_admin_flag => 'Y',
p_admin_group_id => v_group_id,
p_identity_salesforce_id => v_resource_id,
p_sales_lead_profile_tbl => as_utility_pub.g_miss_profile_tbl,
p_sales_lead_rec => l_sales_lead_rec,
p_sales_lead_line_tbl => l_sales_lead_line_tb1,
p_sales_lead_contact_tbl => as_sales_leads_pub.g_miss_sales_lead_contact_tbl,
x_sales_lead_id => q_sales_lead_id,
x_sales_lead_line_out_tbl => x_sales_lead_line_out_tbl,
x_sales_lead_cnt_out_tbl => x_sales_lead_cnt_out_tbl,
x_return_status => q_return_status,
x_msg_count => q_msg_count,
x_msg_data => q_msg_data);
as_sales_leads_pub.Build_Lead_Sales_Team (
P_Api_Version_Number =>2.0,
P_Init_Msg_List=>FND_API.G_TRUE,
p_Commit=>FND_API.G_TRUE,
p_Validation_Level=> FND_API.G_VALID_LEVEL_FULL,
P_Admin_Group_Id =>v_group_id,
P_identity_salesforce_id=>v_resource_id,
P_salesgroup_id=> v_group_id,
P_Sales_Lead_Id=>q_sales_lead_id,
X_Return_Status=>q_return_status,
X_Msg_Count=>a_msg_count,
X_Msg_Data =>a_msg_data);
IF q_return_status = 'S'
THEN
UPDATE al_vendor_sms_crmlead_in
SET conv_status = 'S'
WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
ELSE
UPDATE al_vendor_sms_crmlead_in
SET conv_status = 'E' WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
END IF;
EXCEPTION
WHEN No_Data_Found THEN
UPDATE al_vendor_sms_crmlead_in a
SET a.conv_status = 'ERROR',error_description=out_param
WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
COMMIT;
END;
UPDATE al_vendor_sms_crmlead_in SET msg_flag='Y' WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
END LOOP;
END;

Please post this question in the CRM On Demand Integration Development forum.

Text editable in images in flash Please help

Hello
Dear All Friends
I want to make text editable in images in flash to get copy from text
can i Make this
and other question please
can i convert text in image in flash to normal string ?
please help
Thank you

Images do not store text data in any isolateable manner, it is comprised of just pixels like anything else in the image. You would need to develop some form of complicated text recognition program to be able to extract text from an image, and I don't believe anyone has.

MB Dead now after flashing, please help!@

Similar Messages

Maybe you are looking for