MB_DOCUMENT_BADI Not Working after Transport

Hi Experts
I have created an implementation of the MB_DOCUMENT_BADI in our ECC6 system to perform some processing as part of the goods issue process.  The code has been unit tested and works as required.  I have transported the development to our QA system but despite the implementation showing as active the code is not executed.
Having put a break point on the exit handler class this BADI does not get called in our test system.  Has anyone resolved this or a similar issue before? How can I identify why the badi is not being called?
I'm not sure if this is an ABAP / transport issue or an MM configuration issue, but any help would ge gratefully accepted as I need to get this working and into our live system as a matter of urgency.
Thanks
Andrew

Hi Shiva
I have already got a breakpoint at this point and it does not hit this.  I have added a breakpoint in the method of the earlier implementation and this is not being hit either. 
I now need to identify if this is not being hit as a result of my changes, or whether this implementation was not working before my transport, e.g. after our system upgrade that was completed last year.
Kind regards
Andrew

Similar Messages

  • Hierarchy Analysis Authorization does not work after transport

    Hi Gurus,
    I am facing a issue in hierarchy analysis authorization in quality system but the same authorization works perfectly fine in development.
    All hierarchy authorizations works in Quality except for this one. I found one old sap note describing this as program error but this note is not applicable in BW 7.3.
    I have checked the table RSECVAL, RSECHIER and authorization is active so everything looks good. Please advise if anyone faced this issue after transporting hierarchy auths to other systems
    Regards,
    Salman

    Salman,
    What I understood from your description is that you have same role+AA in Dev and QA, which provides access in Dev for all the nodes for said hierarchy but in QA, same role+AA provides access to the same hierarchy for all the nodes but one. Try to create a ZTEST analysis authorization in QA itself with access for the problematic hierarchy node and see if it works ? This will rule out the case if there is a difference in hierarchy in DEV & QA.
    Regards,
    Shivraj Singh

  • Web template with HTML framset not working after transport

    Hi,
    I've built a frameset which consists of two web-templates (role-menu and content area) those two are combined together using plain HTML which does not acontain any web items (uploaded via WAD). This works fine in development. After transporting to our QA environment all the templates have been transported with concode 0, but the frameset does not get loaded. I always get an "Error loading template ...". The two templates which contain web items work fine when used stand-alone.
    When looking in transport connection I see the following message:
    "Object ZWF_WEB_FRAMESET (Web Template Name) could not be collected for object ()"
    I also see the same behavior on another transport of a template. Nine out of ten ar fine, but one, all are exact copies - only the query used is different, does not work either. The query that is used has been transported and is working.
    Has anybody an idea what could cause this?
    Is there a way to regenerate templates (like RSRT for queries) ?
    Thanks in advance
    Bernd Dümmel
    KODAK Stuttgart
      using ve created a

    Did you upload the video?
    Did you provide the correct path to your HTML object?

  • Adding additional field in cProject is not working after transporting

    Hi All,
    My intention is to add additional field in cProject. So i copied a required view through program BSP_CUSTOMIZE and into another Z* BSP Application object. Then i had done the necessary modification on the view and saved. Then copied error.do controller and actived and tested in development server. It was working fine. So i moved the transport request for this object to quality system. When i tried to test the same thing in quality system, changes done in views are not reflecting.
    When i checked the entries in table BSP_APPLC, i didnt find any. I hope this is the reason why my changes in views are not reflected.
    Can anyone have idea, why it is not happening so. Kindly help.
    Thanks in advance.
    Regards,
    Karthick

    Ensure that in table BSP_APPLC is an entry for cprojects linking to your own aplictaion Zcprojects and is activated.
    I guess you have to reactivate the BSP_CUSTOMIZE in target system again.
    Please remeber: BSP_CUSTOMIZE is not supported officially.

  • MV45AFZZ Enhancement Not Working after Transport

    Hi Experts
    As part of a business requirement for additional checks when saving a sales order I have implemented an enhancement in the form USEREXIT_SAVE_DOCUMENT_PREPARE of the include MV45AFZZ of SAPMV45A.  This was done via SE38 and switching to enhancement mode and then creating an implicit enhancement.  I added my code in this enhancement, activated and tested in our development system without any issues.
    Subsequently these changes were transported to our QA system for further testing however, the enhancement is not being executed.  Looking in SE38 at the include I can see the enhancement and the code I have added, the include is active but if I try and put an external break-point in the code it does not allow me to, which suggests to me that it is not actually active. 
    When looking at this include in the debugger, the code does not show, again suggesting that it is not active, but I have checked everything I can think of and it looks like it should be active.
    Has anyone seen this before, or have any advice on how to resolve this issue?
    Thanks
    Andrew Beavan

    I resolved the problem by regenerating the program SAPMV45A. (I award myself full points - but deduct 10 for being obtuse!)
    Kind regards
    Andrew Beavan

  • Query execution is not working after transports to Production

    Hello All,
    I have released a complete data model for SAP HR from BW Dev to BW Prod. But when I generate a query and try to execute it, I am getting the below mentioned error.
    ANo value could be determined for variable ZEMND001.
    ESpecify a value for variable ZEMND001
    ASystem error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
    I have transferred the global settings as well, but the error still persists.
    Kinfly Help.
    Thanks in adv.
    Regards,
    KP

    Hi,
    Have you tested any query without using this variable ?  if you can create a query w/o this variable, tht will show whether the problem is with your user exit where in the variable values r not getting populated or with the program SAPLRRK0 ;
    Also check the query using RSRT, what error it shows, if possible run it in debug mode over there, with break point in your userexit.
    I hope this will help to show where the problem could be
    Best regards,
    shakeel

  • Tecra M7: Tablet does not work after lid closing

    Has anyone had problems with the tablet not working after closing the lid on a Tecra M7? Bios is 3.20
    Doesn't seem to happen on hibernate or sleep.
    I have the lid set to do nothing on close.

    Hi
    What do you mean with tablet not working after closing the lid?
    Does the notebook freezes or what?? What happens exactly???
    The close the lid settings can be set to hibernation mode or standby mode or no action.
    These settings can be set in the power saver setup actions.
    If you have some problems with some installed Toshiba applications I would recommend reinstalling the TOSHIBA Common Modules and the program which doesnt run correctly!
    Best regards

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • IPhone 5s not working after voice over turned on

    iPhone 5s not working after voice over turned on

    Hello ss1997,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your iPhone will not boot past the Apple logo please follow the steps in the article below.
    iOS: Not responding or does not turn on
    Take care,
    Alex H.

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

    iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.  How can I get the notifications working?

    Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

  • Iphone 5 back camara not working after ios update

    My Iphone 5 back camara is not working after ios 8.1 update this morning
    Only getting some fuzzy image.
    Camara was working before the update.
    Resting the phone to factory setting restoring phone nothing seems to work
    I think this will be my last Iphone as apple never respondse in any case

    If you're expecting Apple to respond on this forum, you will have a long wait. This is a user-to-user technical support forum that is only hosted by Apple. This was made clear when you signed up. In any case, try the steps in this article to troubleshoot hardware issues (there is a camera section):
    iPhone: Hardware troubleshooting

  • Iphone 6 plus facetime camera not working after 8.1 upgrade

    iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

    It seems the facetime camera does not work for whatsapp only it works normally.

  • Caller Id not working after update

    My caller id pictures are not working after the update.

    Still having the same problem.  It appears to be a problem with City ID.  Local Verizon office told me it could be uninstalled.  I can't seem to find out how to uninstall an application that has the uninstall button "greyed out".  After forcing stop the application, it turns itself back on after every call.  When that happens I lose the city the call is coming from, but I still get the number showing.  Other times I don't receive anything.  I NEVER know who's calling me and it's getting annoying. Hell, with AT&T, I knew who was calling me....just couldn't stay connected.  Now if I miss a call..I don't have any clue as to  who to call back.
    Get this City ID crap app off my phone....that's all I want...it's not too much to ask....please...!

Maybe you are looking for

  • Adding drives, proc upgrade: Power Supply? Heat?

    Hello All, Thinking of installing a total of 4 Internal Hard Drives, and a dual 1.6ish processor. Wondering if there are any Power Supply and/or heat issues I need to consider. Current set-up: PM G4 QS 867 1.5GB RAM Power Supply is original: AcBel AP

  • Projector compatability?

    hi all, i'm interested in a toshiba projector (costs around £230) but wasn't sure if it is compatible with the mac. I emailed toshiba and this is what they said; "thank you very much for you inquiry via e-mail. In general, the TDP-S8 supports any SVG

  • My GTX 580 OC will not drop the core clock frequency when idle

    The model is N580GTX-M2D15D5/OC . I have read some reviews said that the GTX580 drops the core clock down to about 50MHz when idle. But my card will always stay at 823MHz. Is this a issue or it's just working as intended? Can i have the clock auto-tu

  • Adobe flash videos "Blocked Plug In".

    Today my internet told me that Adobe flash needed to be updated. I hit ok and nothing happened. Instead all of my videos know say "Blocked Plug In". What does that mean and how can I fix it?

  • Transport table entries

    Hi, this one should be easy to solve. We have a user-defined customizing table with maintenance view. In maintenance view we defined no, or user, recording routine so that users can do adjustments without transport. For the initial distribution to a