MB.P1.V_CORE has exceeded low warning threshold.

Please login:
Serial line login timeout, returns to console stream.
Enter #. to return to ALOM.
SC Alert: VOLTAGE_SENSOR @ MB.P0.V_CORE has exceeded low warning threshold.
I forget the password, and I have already reset the battery, but I can't access the ok prompt.
Please help.
Thanks
Andry

Contact Sun, and open a service case.
http://www.sun.com/secure/contact/
You have a hardware problem.
You have little or no voltage to your cpu modules (MB.P0 and MB.P1),
which could be power supply(s), or the PSU backplane, or the systemboard.
This has nothing to do with forgetting a password.
If you have service contract coverage, they'll just take care of you.
If there's no warranty or service contract, then expect to be charged for service.
An online user-to-user discussion forum cannot help that computer system.
Edit:
I take back some of this response.
If you're simply unable to power up the system,
then you may need to go back and consult your records for whatever the password might be.
Download the documentation for your model computer
and refresh your memory on the ALOM commands,
such as for how to power-on the chassis.
http://sunsolve.sun.com/handbook_pub
Message was edited by:
rukbat

Similar Messages

Sun fire T1000 - VOLTAGE_SENSOR at MB/V_+3V3STBY has exceeded low warning t

Hi everyone,
I am newbie in Sun server and Solaris OS and I have trouble with our old T1000 server. When I power on server, I get message from ALOM console: SC Alert: VOLTAGE_SENSOR at MB/V_+3V3STBY has exceeded low soft shutdown threshold. I read this topic: Re: Error: VOLTAGE_SENSOR at MB/V_+3V3STBY has exceeded low warning threshold and I want to get my serial number of power supply to determine if this alert is factory fault. Can I get it with some command? I can't remove cover from server. Is this alert critical?
Also I have else one problem with T1000 if i want to start Solaris OS, "booting" stuck in loop:
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.1.1
ALOM Build Release: 001
Reset register: e0000000 EHRS ESRS LLRS
Check for Handshake
Returned from Boot Monitor and Handshake
About this problem I read this topic Re: V240 Hangs at loading runtime image but without solution. It should be something together with problem of voltage_sensor?
Can somebody help me please? I don't know which problem I focus on, I need boot into Solaris.
Thank you for reply.

879613 wrote:
Hi everyone,
I am newbie in Sun server and Solaris OS and I have trouble with our old T1000 server. When I power on server, I get message from ALOM console: SC Alert: VOLTAGE_SENSOR at MB/V_+3V3STBY has exceeded low soft shutdown threshold. I read this topic: Re: Error: VOLTAGE_SENSOR at MB/V_+3V3STBY has exceeded low warning threshold and I want to get my serial number of power supply to determine if this alert is factory fault. Can I get it with some command? I can't remove cover from server. Is this alert critical?
Also I have else one problem with T1000 if i want to start Solaris OS, "booting" stuck in loop:
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.1.1
ALOM Build Release: 001
Reset register: e0000000 EHRS ESRS LLRS
Check for Handshake
Returned from Boot Monitor and Handshake
About this problem I read this topic Re: V240 Hangs at loading runtime image but without solution. It should be something together with problem of voltage_sensor?
Can somebody help me please? I don't know which problem I focus on, I need boot into Solaris.
Thank you for reply.As described in Re: Error: VOLTAGE_SENSOR at MB/V_+3V3STBY has exceeded low warning threshold:
... your power supply has failed. You need to replace it.
Since all T1000's are EOL, you will need to buy a new one unless you have a service contract that covers repair support on the entire chassis.
No, you cannot type a command to get serial numbers or part numbers of the power supply. Power supplies for such a system are "too stupid" to be able to answer a software inquiry probe. The PSU design is simple. It will work or it will not work.
If you think there is some sort of a recall on those power supplies, you will need to contact Technical Support directly. These forums are NOT Tech Support.
Opinion? There is no such recall, or if there ever was the time has long ago expired when someone could take advantage of it.
Your system doesn't boot because the PSU has failed. Gert the computer repaired. Go to eBay if you must, but you will need to buy replacement parts.

Clustered role 'Cluster Group' has exceeded its failover threshold.

Hello.
I’m hoping to get some help with a cluster issue I’m having using Windows Storage Server 2012.
When the cluster is created my Cluster Core Resources are all happy and online.
I can more the Cluster Name using “move Core Cluster Resources” between the two nodes without any problems.
If I select ‘Simulate Failure’ on the IP Address resource, it works the first time
If I do it again shortly after it fails and I get an Event ID 1254, 1205 and 1069.
Event ID 1254
Clustered role 'Cluster Group' has exceeded its failover threshold.
It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state.
No additional attempts will be made to bring the role online or fail it over to another node in the cluster.
Please check the events associated with the failure. After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring it online again after the restart delay period.
Event ID 1205
The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
Event ID 1069
Cluster resource 'Cluster IP Address' of type 'IP Address' in clustered role 'Cluster Group' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it.
Check the resource and group state using Failover Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Basically I’m trying to simulate a network failure to make sure the failover kicks in.
If I click on it and ‘Bring Online’ it comes up fine.
Where do I find this Threshold Policy and set it to initiate failover if the IP Address resources fails?
Thank you in advance for your help.

Hi,
The failover threshold is the number of times the group can fail over within the number of hours specified by the failover period. For example, if a group failover threshold is set to "5" and its failover period to "3," the clustering software stops attempting
to bring the group online and leaves the resources within the group in their current state. For example, if the IP Address resource is brought online but the Network Name resource fails, the group is left offline, but the IP Address resource is left online.
To configure thresholds for a resource:
Right-click the cluster resource and then select 'Propereties'
Click 'Advanced'
Select 'Do not restart' if the cluster service should not attempt to restart. Restart is the default
If 'Restart' is selected:
Affect the Group: uncheck to prevent a failure of the selected resource from causing the Server group to failover
Threshold: number of times the cluster service will attempt to restart the resource, and period is the amount of time in seconds between retries
Do not modify the 'LooksAlive' and 'IsAlive' settings
Unless necessary, do not alter the 'Pending Timeout'. This is the amount of time the resource is either in the online or pending or offline pending states before the the cluster service puts it in either offline or failed state
For more information please refer to following MS articles:
Windows Failover Clustering Overview
http://blogs.technet.com/b/rob/archive/2008/05/07/failover-clustering.aspx
Tuning Failover Cluster Network Thresholds
http://blogs.msdn.com/b/clustering/archive/2012/11/21/10370765.aspx
Failover cluster (group) maximum failures limit
http://blogs.msdn.com/b/arvindsh/archive/2012/03/09/failover-cluster-group-maximum-failures-limit.aspx
Lawrence
TechNet Community Support

Clustered role 'Availability Role' has exceeded its failover threshold

I am getting this alert on SQL 2012 R2 SP1. So please kindly tell me the solution of the below given alert on windows failover clustering .
Clustered role 'Availability Role' has exceeded its failover threshold. It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state. No additional attempts will
be made to bring the role online or fail it over to another node in the cluster.Please check the events associated with the failure. After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring
it online again after the restart delay period.

Hi Syed Tauseef Ahmed,
Please offer more information such as under what circumstances this issue occurs, what event id you have got. The failover threshold is the number of times the group can fail
over within the number of hours specified by the failover period.
The related KB:
Tuning Failover Cluster Network Thresholds
http://blogs.msdn.com/b/clustering/archive/2012/11/21/10370765.aspx
You can refer the following similar thread for the first step troubleshooting:
Clustered role 'Cluster Group' has exceeded its failover threshold.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4eb44f05-eb9b-448a-821b-359879141608/clustered-role-cluster-group-has-exceeded-its-failover-threshold
I’m glad to be help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Warning Query has exceeded 200 rows.

Hello gurus,
I am currently getting a warning message when I run a page and click on a tab more than once.
The page I am running is a customer html form at the site level. The name of the page is ArAcctSiteOverviewPG.
There are 7 tabs on this page. When I click on the Site Details tab more than once I get this warning message: "Query has exceeded 200 rows. Potentially more rows exist, please restrict your query."
If I click on the other tabs more than once I do not get a warning message.
Anyone encountered this error before?
This is a standard oracle html form, no customizations has been made. Running R12.1.3.
Thanks in advanced!

Query has exceeded 200 rows
Re: Query has exceeded 200 rows
Thanks
--Anil
http://oracleanil.blogspot.com/

Warning Query has exceeded 200 rows. Potentially more rows exist...

Hi all,
I am getting a following warning message on every page.
Query has exceeded 200 rows. Potentially more rows exist, please restrict your query.
In my code whatever VO i am using doesnt fetch more than 50 records still I am getiing warning as Query exceeded 200 rows.
Even on helloWorld Page from Tutorial.jpr also I am getting the same warning.
Any suggestions , how to remove it.
Thanks and Regards,
Anant.

Its an oracle instance system profile. It will be in effect whether you are testing the page from jdev or the instance.
--Shiv

Warning - Query has exceeded 200 rows. Potentially more rows exist, please

Hi Guys
I am really stuck on this one did a snoop in the forum to find what the problem may be but have found nothing that can help me.
I get the following error on my pages.
I am using 11.5.10
Warning - Query has exceeded 200 rows. Potentially more rows exist, please restrict your query.
I had originally created a page and a view object with the relevent app module... and it was givin me the error. so what i did was delete the project
created a page and just the app module with no view objects
there is nothing on the page.. just that the page is linked to the app module via app module instance option.
still givin the error
i change the profile option for personal view object retrieval to 10 and still no avail..
the message just change from
Warning - Query has exceeded 200 rows. Potentially more rows exist, please restrict your query.
to
Warning - Query has exceeded 10 rows. Potentially more rows exist, please restrict your query.
i have changed the max fetch size as well as the fetch size to limit the query..
i have changed the max fetch size via code and setmaxfetchsize(1) via code on iniziliation..
PLEASE HELP?>>>

Hi George,
What do you mean by, when you claim that the page still runs without your VO (i.e. Just the PG & AM)? Does it means that your webBeans in the page that references the VO Attributes, still comesup with no issues like (VO not found)?
If yes, then your jdev. project is picking up the VO xml/class files else where from your classpath. Please check your classpath settings and library settings to see where the old file is still available.
HTH.

Where has my "Battery Low" warning gone?

Where has my "Battery Low" warning gone?
When it got below 5% (I think) I used to get a warning come up. Now for about last 2 or 3 weeks it just shuts down with no warning. Plus when I attach the power lead & switch on the battery status says it is at 27%.
My MacBookPro2,2 is a 2006 unit from USA, running on
OS X ver. 10.6.8
Processor 2.16 GHz Intel Core 2 Duo
Memory 3 GB 667 MHz DDR2 SDRAM
We had a genuine battery fitted by Apple about 9mths ago.
Any Help will be appreciated
Tony

Reset the SMC. I'm pretty sure that model has a removeable battery, so you want this method:
Resetting the SMC on Mac portables with a battery you can remove
Note: Learn about removing the battery on MacBook and MacBook Pro.
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
You shouldn't be running the battery down that low on a regular basis though. It'll shorten the life of the battery.

Cluster node has exceeded it's failover threshold

I am trying to create the Availability group listener for a 2 node cluster and cluster node events show failure due to "Cluster node has exceeded it's failover threshold" after I make one attempt that has failed for a variety of reasons, usually
permission. How do I set the threshold higher. All the information I get tells me to open processes that are not listed in the failover cluster manager. I haven't seen code that works in powershell. How can I set the failover threshold higher than one?

Hi,
Please try to install the recommended hotfixes and updates for Windows Server 2012-based failover cluster then monitor it again.
The related hotfixes.
Recommended hotfixes and updates for Windows Server 2012-based failover clusters
http://support.microsoft.com/kb/2784261/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I get rid of 'Warning: Query has exceeded 200 rows...' message

Hi there,
I have a custom page to query our Inventory details. I display 100 rows on the page. I noticed today I can hit next once and then I get the message 'Query has exceeded 200 rows. Potentially more rows exist, please restrict your query'. If I try to Export this data using an Export to Excel button, it gives me the message 'There is no data to export'.
I am EXTREMELY new to OAF...is there a property or something somewhere that I can change to fix this? We will have potentially 100s of thousands of records to display and export, so 200 simply is not acceptable.
We are on ATG RUP7, 11.5.10.2. This is a completely custom page, pulling from custom tables. Please let me know if any other information is needed.
Thanks,
Janel

anasazii wrote:
Thanks, Shailendra!I am glad it worked, Thanks for the point Janel. :)
That seems to work for when I run the page through the iSupplier portal. However I noticed during development when I am testing the page on my computer, I am still getting this message? Is there anyway to get rid of it on the client side? I assume that profile is set correctly on the development instance which you are using from JDEV.
Sometimes you need apache bounce to make sure the profile option change come into effect.
So do a apache bounce.
Thanks
Shailendra
>
Thanks,
Janel

Number of times a particular vendor has exceeded the threshold limit

Hello,
We wish to find the number of times a particular vendor invoice has exceeded tolerance limit. Is there any table where this data gets updated or is their any standard report ?
Regards
Jayesh.

Firstly note that you cannot 'exceed' the tolerance. Based on the tolerance, you can goods receipt a higher quantity than specified in the PO.
Check vendor evaluation report ME6H, it provides scores to vendors on quantity reliability. You can use this if you have vendor evaluation configured for your Pur org.
If you are thinking for a Z logic, for each PO line item for the vendor, search in MSEG and total the quantity receipted. If this exceeds the quantity order in the PO item, increase your counter.

Amount of data has exceeded maximum limit - Infopath form

Hello, I am having a problem on O365 concerning an Infopath form.
The warning goes like this : " The amount of data that was returned by a data connection has exceeded the maximum limit that was configured by the server administrator"
Solutions exist for other version of Sharepoint/Infopath. I see in SharePoint 2013, this value is 1500 kilobytes by default
and we can increase the maximum size of that. However, in SharePoint Online, it cannot be changed.
Can you guys please help?
Thanking you in advance.
Regards,
Nite

Hi Nite,
You should ask this question in the Office365 forums:
http://community.office365.com/
But as this question has been asked before, it is not possible to change the limit in O365. Please see this thread:
http://community.office365.com/en-us/f/154/t/252391.aspx
Nico Martens
SharePoint/Office365/Azure Consultant

IPhone ~needs~ an AUDIBLE Battery-low warning during calls!!!

Okay, I've been needing to do this for quite some time. I'm actually surprised to find no one else has made this complaint yet (that I've been able to find).
I am absolutely sick and tired of my iPhone dying in the middle of a call because I was not alerted to the battery's status once it got to 20% or lower.
Does it make sense to anyone else that this happens? You're on a call, to your knowledge the battery was full or reasonably full before but now that you're talking you can't see the screen and you're not thinking about it so you keep talking. A while later your call drops and as you start to curse AT&T once again for the miserable coverage & constantly dropping calls you see that it's not them after all, but your phone's dead battery.
Come on Apple.... How hard can it possibly be to program in an AUDIBLE-IN-CALL alert that tells you that your battery is about to die. This is so basic and simple that I'm finding it hard to believe that this hasn't been addressed before now!!! Don't get me wrong, I love my iPhone. I will never need another phone as long as there is some variation of the iPhone in existence. But seriously, this is something that should have been dealt with AGES AGO.
I don't feel like I should even have to be saying this, but when you are in a call, your phone is against your ear, or if you use a headset of some kind, your phone is likely in a pocket. A Battery-Low warning that comes up on the screen is NOT going to be visible. There NEEDS to be a way for the iPhone to notify the user of a Battery-Low status that ACTUALLY GETS THEIR ATTENTION, not simply to remind them AFTER they've got it charging again that, yes, now that the phone is charging and back up from 0%, that the battery is still in-fact below 20%....
I really am a reasonably devoted Apple fan, but I am highly annoyed by this, because while I have had my iPhone 3G since the week they were released, whenever the above problem would happen to me I just assumed it would only be a matter of time before it got ironed out. I mean, come on, Apple's a smart company, and this is such a basic thing that lesser phones have had this programmed into their OS's going back to some of the very first cellular phones in existence, I know, I've owned a few.
Apple, Please. Fix this.
Thank you in advance.

thegadson6 wrote:
I just posted the same thing and it's now 2014!!!! I have endured this problem since my iphone 3gs.
And the option is still the same. Give feedback to Apple directly at www.apple.com/feedback.
Nothing anyone can do here, other than recommend that you be more aware of your battery life. Keep it connected to a power source when not in use, or if one is readily available when you are using it. I have a charger for home, one for my car, and one at work. I never see the battery low indicators, except in very rare cases. It's very rare for my battery to be below 50%.

Why don't I get a battery low warning anymore, laptop just turns off?

My laptop is only just over a year old and I no longer get a battery low warning message. My computer just switches off. Have I disabled the warning somehow?
The battery lasts for about an hour and a half which isn't great. This is what System Profiler says about it:
Model Information:
Serial Number: SMP-bq20z951-3a6c-fac
Manufacturer: SMP
Device name: bq20z951
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 002a
Hardware Revision: 000a
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 1427
Fully charged: No
Charging: No
Full charge capacity (mAh): 3751
Health Information:
Cycle count: 339
Condition: Good
Battery Installed: Yes
Amperage (mA): -1921
Voltage (mV): 10690
Any suggestions would be appreciated. Thanks.

You have the removable battery? In that case, you can expect it to have up to 80% of original capacity at 300 cycles. You have 390 cycles, and it's probably got less than 80% capacity if it only lasts 1 1/2 hour. It's very likely just at the end of its useful life. If you go to an Apple Store, they can stress test it for you, and very likely you will be told you need a new one.
Coconut Battery will show you the current battery capacity vs. the original battery capacity. Mine has 88% capacity after 259 cycles, but the last time I tried to calibrate it, my Mac shut off instead of going to sleep, although I did get the warning. I don't know if you can really calibrate it if it shuts down suddenly. The health on mine didn't change after the last shutdown.
Good luck!

ACS view DB size has exceeded allowed quota

Hi:
We have an CSACS-1121-K9 with ACS version 5.4.0.46.3.
We see the following warning "ACS view DB size has exceeded allowed quota" . I can't find the meaning of this , how critical it is, or what should be done.
Anyone have an answer.
The ACS has in the last 2 days stopped showing log messages. I was wondering if this message could be related.
Thanks for the help
Mickey

Hi Mickey,
The Monitoring and Report Viewer database handles large volumes of data. When the database size becomes too large, it slows down all the processes. You do not need all the data all the time. Therefore, to efficiently manage data and to make good use of the disk space, you must back up your data regularly and purge unwanted data that uses up necessary disk space. Purging data deletes it from the database.
Also check the following links,
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-4/user/guide/acsuserguide/viewer_sys_ops.html#wp1068157
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/secure-access-control-server-view-4-0/white_paper_c07-484555.html
Thanks
Anas

MB.P1.V_CORE has exceeded low warning threshold.

Similar Messages

Maybe you are looking for